Fish colonization of artificial reefs in a large Neotropical reservoir: material type and successional changes

Artificial reefs have barely been used in Neotropical reservoirs (about five studies in three reservoirs), despite their potential as a fishery management tool to create new habitats and also to understand fish ecology. We experimentally assessed how reef material (ceramic, concrete, and PVC) and time modulated fish colonization of artificial reefs deployed in Itaipu Reservoir, a large reservoir of the mainstem Parana´ River, Brazil. Fish richness, abundance, and biomass were significantly greater in the reef treatments than at control sites. Among the experimental reefs, ceramic followed by the concrete treatments were the materials most effectively colonized, harboring the majority of the 13 fish species recorded. Although dependent on material type, many of the regularities of ecological successions were also observed in the artificial reefs, including decelerating increases in species richness, abundance, mean individual size, and species loss rates with time and decelerating decreases of species gain and turnover rates. Species composition also varied with material type and time, together with suites of life history traits: more equilibrium species (i.e., fishes of intermediate size that often exhibit parental care and produce fewer but larger offspring) of the Winemiller-Rose model of fish life histories prevailed in later successional stages. Overall, our study suggests that experimental reefs are a promising tool to understand ecological succession of fish assemblages, particularly in tropical ecosystems given their high species richness and low seasonality

Inteligencia artificial para la detección y el diagnóstico de fallos

L' ús de tècniques de la intel·ligència artificial per a la detecció, la diagnòsi i control d' errors

Avaliação da fotodegradação de poliolefinas através de exposição natural e artificial

Samples of polypropylene (PP) and low-density polyethylene (LDPE) were submitted to ultraviolet radiation, in the natural environment and also in the laboratory. Chemical modifications were quantified by the carbonyl index (CI), mechanical properties and melt flow index. The degradation in the laboratory was comparatively faster than in the environment for both types of polymers. The accelerating factor was determined for the various properties investigated. This parameter, however, showed a large variation with the degradation criteria and the type of polymer. The existence of a "universal accelerating factor", therefore, was not observed in the current study.

Aplicação de radiação UV artificial e solar no tratamento fotocatalítico de efluentes de curtume

Tannery effluents are very dangerous for the environment since they contain large amounts of dangerous and biorecalcitrant contaminants (organic matter and Cr(VI)). This paper reports the efficiency of heterogeneous photocatalysis, based on the application of solar and artificial radiation, furnished by UV lamps, using TiO2 fixed on a flat plate, in the treatment of synthetic effluents. The results of COD and Cr(VI) demonstrate that the use of solar radiation is the most efficient way to perform the photocatalytic treatment of these effluents since a minimum removal of 62 and 61% was observed for Cr(VI) and organic matter, respectively.

Degradação do pesticida Padron® por processos fotoquímicos utilizando luz artificial e solar

Destruction of Padron® (dye and picloram) was evaluated using a photoreactor and a solar reactor. Photolysis was observed using only a germicide lamp (GL). Black light (BL) and H2O2 (172 mmol L-1) promoted a conversion of 49% and 6% of dye and picloram, respectively. Photocatalytic processes were more efficient using TiO2/GL (96%-dye; 60%-picloram) than TiO2/BL (44%-dye; 40%-picloram). Photolysis using sunlight was not observed during PadronÒ recirculation in the reactor constructed with four borosilicate tubes. Meanwhile, adding H2O2 resulted in 12% conversion of dissolved organic compounds. Finally, the most efficient mineralization (60%) was obtained using the Fenton reaction ( H2O2-176 mmol L-1; FeSO4x6H2O-90 mmol L-1) and sunlight.

Efeito do intemperismo artificial em quatro madeiras tropicais monitorado por espectroscopia de infravermelho (DRIFT)

Four tropical woods, were investigated to compare their performance and natural resistances to artificial weathering using the diffuse reflectance infrared Fourier transform spectroscopy (DRIFT). The species were garapeira (Apuleia leiocarpa), itaúba (Mezilaurus itauba) and tauari (Couratari sp.), woods traditionally indicated for exterior uses, and marupá (Simarouba amara), that served as reference. The samples were submitted to cycles of UV radiation (350 nm) and water until 2,000 h. The photodegradation processes of woods surfaces were accomplished monitoring the changes in the intensities associated to lignin (1508 cm-1) and carbonyl group (1736 cm-1) absorptions. The results have shown that lignin was the first component to be photodegradated, resulting in surfaces mainly composed by cellulose, after 2,000 h of UV irradiation. The processes of formation and lixiviation of carbonyl compounds were different for each species. The experimental conditions used in this work were too severe to evaluate the wood density and extractives content influences during the treatment.

Projecte constructiu de llac artificial situat a la Bonaigua a l’estació d’esquí de Baqueira-Beret (Vall d’Aran)

El document té per objecte la definició a nivell constructiu de les obres de implantació d’una nova captació, un nou llac artificial, i la canonada de connexió per a la producció de neu artificial a l’estació d’esquí de Baqueira-Beret (Vall d’Aran), concretament a la zona de Bonaigua.

Estudio gráfico básico de lago artificial situado en Argulls. Estación de esquí de Baqueira-Beret. Vall d’Aran.

Propuesta gráfica de nuevo lago artificial en Argulls. Estación de esquí de Baqueria-Beret

Aplicação de técnicas multivariadas e inteligência artificial na análise de espectros de infravermelho para determinação de matéria orgânica em amostras de solos

In this paper studies based on Multilayer Perception Artificial Neural Network and Least Square Support Vector Machine (LS-SVM) techniques are applied to determine of the concentration of Soil Organic Matter (SOM). Performances of the techniques are compared. SOM concentrations and spectral data from Mid-Infrared are used as input parameters for both techniques. Multivariate regressions were performed for a set of 1117 spectra of soil samples, with concentrations ranging from 2 to 400 g kg-1. The LS-SVM resulted in a Root Mean Square Error of Prediction of 3.26 g kg-1 that is comparable to the deviation of the Walkley-Black method (2.80 g kg-1).

Xylitol from rice husks by acid hydrolysis and Candida yeast fermentation

An investigation was conducted into the production of xylose by acid hydrolysis of rice husks and its subsequent bioconversion to xylitol. The parameters were optimised using the response surface methodology. The fermentation stage took place with the aid of the yeast species Candida guilliermondii and Candida tropicalis. An evaluation of the influence of several biomass pre-treatments was also performed. The effects of the acid concentration and hydrolysate pH on xylitol global yield were also assessed, and the highest yield of xylitol was 64.0% (w/w). The main products, xylose and xylitol, were identified and quantified by means of liquid chromatography.

Time-series forecasting of pollutant concentration levels using particle swarm optimization and artificial neural networks

This study evaluates the application of an intelligent hybrid system for time-series forecasting of atmospheric pollutant concentration levels. The proposed method consists of an artificial neural network combined with a particle swarm optimization algorithm. The method not only searches relevant time lags for the correct characterization of the time series, but also determines the best neural network architecture. An experimental analysis is performed using four real time series and the results are shown in terms of six performance measures. The experimental results demonstrate that the proposed methodology achieves a fair prediction of the presented pollutant time series by using compact networks.

Simple method for mass production of polypyrrole/carbon nanotubes hybrid artificial muscle

Large scale preparation of hybrid electrical actuators represents an important step for the production of low cost devices. Interfacial polymerization of polypyrrole in the presence of multi-walled carbon nanotubes represents a simple technique in which strong interaction between components is established, providing composite materials with potential applications as actuators due to the synergistic interaction between the individual components, i.e., fast response of carbon nanotubes, high strain of polypyrrole, and diversity in the available geometry of resulting samples.

Inoculação artificial de colmos de milho em diferentes idades e concentrações de inóculo e sua relação com a expressão da resistência a fusarium moniliforme

A podridão do colmo de milho (Zea mays) causada por Fusarium moniliforme tem ocorrência generalizada nas regiões produtoras do Brasil. Visando obter informações sobre o comportamento da doença, foram conduzidos dois experimentos em campo, um inoculando-se artificialmente colmo de plantas aos 30, 55 e 80 dias após a semeadura, e outro testando-se diferentes concentrações de inóculo, 1x10(4), 5x10(5) e 1x10(7) conídios/ml, aplicadas aos 55 dias após a semeadura. Nesses experimentos utilizou-se o delineamento de blocos ao acaso, com respectivamente, quatro e cinco repetições, sendo cada parcela constituída de 50 plantas. As inoculações foram feitas no centro do segundo entrenó alongado acima do solo. A avaliação da doença foi realizada aos 120 dias após a semeadura, com base na sintomatologia interna do colmo, utilizando uma escala de notas variando de 1 a 9. Por ocasião da colheita foram avaliados o número de plantas acamadas e a produção de grãos. Procedeu-se também a análise do teor de lignina e tanino da casca e da parte interna do entrenó inoculado nos diferentes tratamentos. Todas as concentrações de inóculo testadas permitiram diferenciar os níveis de resistência dos híbridos, sendo estes decrescentes a partir do Cargill 333 para o Cargill 901, tendo o Dina 766 um comportamento intermediário. Por outro lado, não houve diferenças significativas para as inoculações em diferentes épocas. Os teores de taninos não foram significativamente diferentes entre os híbridos, já o teor de lignina foi significativamente relacionado com o nível de resistência dos três híbridos avaliados.

Efficiency of a yeast-based formulation for the biocontrol of postharvest anthracnose of papayas

To identify formulations of biological agents that enable survival, stability and a good surface distribution of the antagonistic agent, studies that test different application vehicles are necessary. The efficiency of two killer yeasts, Wickerhamomyces anomalus (strain 422) and Meyerozyma guilliermondii (strain 443), associated with five different application vehicles, was assessed for the protection of postharvest papayas. In this study, after 90 days of incubation at 4ºC, W. anomalus (strain 422) and M. guilliermondii (strain 443) were viable with all application vehicles tested. Fruits treated with different formulations (yeasts + application vehicles) had a decreased severity of disease (by at least 30%) compared with untreated fruits. The treatment with W. anomalus (strain 422) + 2% starch lowered disease occurrence by 48.3%. The most efficient treatments using M. guilliermondii (strain 443) were those with 2% gelatin or 2% liquid carnauba wax, both of which reduced anthracnose by 50% in postharvest papayas. Electron micrographs of the surface tissues of the treated fruits showed that all application vehicles provided excellent adhesion of the yeast to the surface. Formulations based on starch (2%), gelatin (2%) and carnauba wax (2%) were the most efficient at controlling fungal diseases in postharvest papayas.

Resistência de cultivares de trigo à giberela mediante inoculação artificial em espiguetas

Este trabalho teve como objetivo determinar a concentração ótima de conídios de F. graminearumpara inoculação artificial em espiguetas de trigo e verificar o tipo de resistência à giberela (Tipo I e/ou II) dos cultivares de trigo. O trabalho foi composto por dois experimentos, sendo que no primeiro determinou-se a concentração ótima de conídios mL-1 para inoculação artificial em quatro cultivares. Para isso, testou-se as concentraçóes de 5x103, 15x103, 25x103, 35x103 e 40x103 conídios mL-1. Vinte e um dias após a inoculação quantificou-se a incidência de F. graminearum em espiguetas, sendo que através de análise de regressão, determinou-se a concentração ótima de conídios mL-1 para cada cultivar. No segundo experimento, avaliou-se a resistência à giberela dos cultivares de trigo mediante inoculação artificial, utilizou-se a mesma metodologia do experimento anterior e a concentração de 31x103conídios mL-1. As variáveis avaliadas foram severidade, grão giberelados e incidência em espiguetas gibereladas. A melhor concentração para inoculação artificial de giberela em espiguetas de trigo é de 31x103conídios mL-1. A maior severidade da doença foi verificada para os cultivares de trigo BRS 208 e Pampeano e a maior percentagem de grão giberelado foi para o cultivar BRS 208. Os cultivares Pampeano e BRS 177 não apresentaram resistência do Tipo I à giberela, porém apresentam do Tipo II, enquanto que os cultivares Mirante e BRS 208 não apresentam nenhum dos dois tipos de resistência.