Leaf area of common bean genotypes during early pod filling as related to plant adaptation to limited phosphorus supply

Low phosphorus supply markedly limits leaf growth and genotypes able to maintain adequate leaf area at low P could adapt better to limited-P conditions. This work aimed to investigate the relationship between leaf area production of common bean (Phaseolus vulgaris) genotypes during early pod filling and plant adaptation to limited P supply. Twenty-four genotypes, comprised of the four growth habits in the species and two weedy accessions, were grown at two P level applied to the soil (20 and 80 mg kg-1) in 4 kg pots and harvested at two growth stages (pod setting and early pod filling). High P level markedly increased the leaf number and leaf size (leaf area per leaf), slightly increased specific leaf area but did not affect the net assimilation rate. At low P level most genotypic variation for plant dry mass was associated with leaf size, whereas at high P level this variation was associated primarily with the number of leaves and secondarily with leaf size, specific leaf area playing a minor role at both P level. Determinate bush genotypes presented a smaller leaf area, fewer but larger leaves with higher specific leaf area and lower net assimilation rate. Climbing genotypes showed numerous leaves, smaller and thicker leaves with a higher net assimilation rate. Indeterminate bush and indeterminate prostrate genotypes presented the highest leaf area, achieved through intermediate leaf number, leaf size and specific leaf area. The latter groups were better adapted to limited P. It is concluded that improved growth at low P during early pod filling was associated with common bean genotypes able to maintain leaf expansion through leaves with greater individual leaf area.

Safer Construction and Maintenance Safer Construction and Maintenance Practices to Minimize Potential Liability by Counties from Accidents, September 1979

Tort claims resulting from alleged highway defects have introduced an additional element in the planning, design, construction, and maintenance of highways. A survey of county governments in Iowa was undertaken in order to quantify the magnitude and determine the nature of this problem. This survey included the use of mailed questionnaires and personal interviews with County Engineers. Highway-related claims filed against counties in Iowa amounted to about $52,000,000 during the period 1973 through 1978. Over $30,000,000 in claims was pending at the end of 1978. Settlements of judgments were made at a cost of 12.2% of the amount claimed for those claims that had been disposed of, not including costs for handling claims, attorney fees, or court costs. There was no clear time trend in the amount of claims for the six-year period surveyed, although the amount claimed in 1978 was about double the average for the preceding five years. Problems that resulted in claims for damages from counties have generally related to alleged omissions in the use of traffic control devices or defects, often temporary, resulting from alleged inadequacies in highway maintenance. The absence of stop signs or warning signs often has been the central issue in a highway-related tort claim. Maintenance problems most frequently alleged have included inadequate shoulders, surface roughness, ice o? snow conditions, and loose gravel. The variation in the occurrence of tort claims among 85 counties in Iowa could not be related to any of the explanatory variables that were tested. Claims appeared to have occurred randomly. However, using data from a sub sample of 11 counties, a significant relationship was shown probably to exist between the amount of tort claims and the extensiveness of use of warning signs on the respective county road systems. Although there was no indication in any county that their use of warning signs did not conform with provisions of the Manual on Uniform Traffic Control Devices (Federal Highway Administration, Government Printing Office, Washington, D.C., 1978), many more warning signs were used in some counties than would be required to satisfy this minimum requirement. Sign vandalism reportedly is a problem in all counties. The threat of vandalism and the added costs incurred thereby have tended to inhibit more extensive use of traffic control devices. It also should be noted that there is no indication from this research of a correlation between the intensiveness of sign usage and highway safety. All highway maintenance activities introduce some extraordinary hazard for motorists. Generally effective methodologies have evolved for use on county road systems for routine maintenance activities, procedures that tend to reduce the hazard to practical and reasonably acceptable levels. Blading of loose-surfaced roads is an example of such a routine maintenance activity. Alternative patterns for blading that were investigated as part of this research offered no improvements in safety when compared with the method in current use and introduced a significant additional cost that was unacceptable, given the existing limitations in resources available for county roads.

A Laboratory Investigation into the Effects of the Aggregated Related Facts of Critical VMA in Asphalt Paving Mixtures, June 2000

This report summarizes research conducted at Iowa State University on behalf of the Iowa Department of Transportation, focusing on the volumetric state of hot-mix asphalt (HMA) mixtures as they transition from stable to unstable configurations. This has raditionally been addressed during mix design by meeting a minimum voids in the mineral aggregate (VMA) requirement, based solely upon the nominal maximum aggregate size without regard to other significant aggregate-related properties. The goal was to expand the current specification to include additional aggregate properties, e.g., fineness modulus, percent crushed fine and coarse aggregate, and their interactions. The work was accomplished in three phases: a literature review, extensive laboratory testing, and statistical analysis of test results. The literature review focused on the history and development of the current specification, laboratory methods of identifying critical mixtures, and the effects of other aggregate-related factors on critical mixtures. The laboratory testing involved three maximum aggregate sizes (19.0, 12.5, and 9.5 millimeters), three gradations (coarse, fine, and dense), and combinations of natural and manufactured coarse and fine aggregates. Specimens were compacted using the Superpave Gyratory Compactor (SGC), conventionally tested for bulk and maximum theoretical specific gravities and physically tested using the Nottingham Asphalt Tester (NAT) under a repeated load confined configuration to identify the transition state from sound to unsound. The statistical analysis involved using ANOVA and linear regression to examine the effects of identified aggregate factors on critical state transitions in asphalt paving mixtures and to develop predictive equations. The results clearly demonstrate that the volumetric conditions of an HMA mixture at the stable unstable threshold are influenced by a composite measure of the maximum aggregate size and gradation and by aggregate shape and texture. The currently defined VMA criterion, while significant, is seen to be insufficient by itself to correctly differentiate sound from unsound mixtures. Under current specifications, many otherwise sound mixtures are subject to rejection solely on the basis of failing to meet the VMA requirement. Based on the laboratory data and statistical analysis, a new paradigm to volumetric mix design is proposed that explicitly accounts for aggregate factors (gradation, shape, and texture).

Soil losses from typic cambisols and red latosol as related to three erosive rainfall patterns

Rainfall erosivity is one of the main factors related to water erosion in the tropics. This work focused on relating soil loss from a typic dystrophic Tb Haplic Cambisol (CXbd) and a typic dystrophic Red Latosol (LVdf) to different patterns of natural erosive rainfall. The experimental plots of approximately 26 m² (3 x 8.67 m) consisted of a CXbd area with a 0.15 m m-1 slope and a LVdf area with 0.12 m m-1 slope, both delimited by galvanized plates. Drainpipes were installed at the lower part of these plots to collect runoff, interconnected with a Geib or multislot divisor. To calculate erosivity (EI30), rainfall data, recorded continuously at a weather station in Lavras, were used. The data of erosive rainfall events were measured (10 mm precipitation intervals, accuracy 0.2 mm, 24 h period, 20 min intervals), characterized as rainfall events with more than 10 mm precipitation, maximum intensity > 24 mm h-1 within 15 min, or kinetic energy > 3.6 MJ, which were used in this study to calculate the rainfall erosivity parameter, were classified according to the moment of peak precipitation intensity in advanced, intermediate and delayed patterns. Among the 139 erosive rainfall events with CXbd soil loss, 60 % were attributed to the advanced pattern, with a loss of 415.9 Mg ha-1, and total losses of 776.0 Mg ha-1. As for the LVdf, of the 93 erosive rainfall events with soil loss, 58 % were listed in the advanced pattern, with 37.8 Mg ha-1 soil loss and 50.9 Mg ha-1 of total soil loss. The greatest soil losses were observed in the advanced rain pattern, especially for the CXbd. From the Cambisol, the soil loss per rainfall event was greatest for the advanced pattern, being influenced by the low soil permeability.

Science, practice and patient needs: the work of the Plinius Maior Society.

The Plinius Maior Society is a European multinational, multidisciplinary group of clinicians and researchers in the alcoholism field, which strives for a comprehensive care concept in the management of alcoholism and alcohol-related problems. The Society, using evidence-based medicine, has developed a set of protocols, in the forms of guidelines, flow-charts, leaflets and booklets, for use as tools in research on and treatment of alcohol dependence, with a view to standardize clinical research procedures and to bridge the gap between the alcoholism researcher, practitioner and patient. These protocols or tools have been subjected to a review process during their preparation, and further comments on their validity will be integrated in their updates. Seven protocols have so far been developed, two of which, 'Guidelines on Evaluation of Treatment of Alcohol Dependence' and 'Detection and Management of Patients with Psychiatric and Alcohol Use Disorders', are aimed at the clinical researcher and specialists, whereas three others [in the form of decision trees (flow-charts)] are aimed at the general practitioner and other primary health care providers. These are entitled 'Alcohol Risk Assessment and Intervention in Primary Care', 'Withdrawal from Alcohol at Home' and 'Brief Intervention in Patients with Alcohol-Related Problems'. The remaining two tools are booklets aimed at the patient, one to support initiatives for detection of drinking problems and primary intervention, namely 'Do you have this Problem? Discuss it with your Doctor!', and the other to assist the patient in relapse prevention after the early stages of treatment, namely 'On the Way to Recovery'. The protocols for the general practitioners and patients have so far been produced in seven European languages, and, as with the Guidelines, feedback from target users will be collected and incorporated in future updates. The Society continually seeks to consider areas of clinical importance for its work and, as it enters the new millennium, it hopes to address and make a significant contribution to the most pressing problem in the management of alcohol dependence, namely relapse.

Safer Constrauction and Maintenance Practices to Minimize Potential Liabiliy by Counties from Accidents, Septemeber 1979

Tort claims resulting from alleged highway defects have introduced an additional element in the planning, design, construction, and maintenance of highways. A survey of county governments in Iowa was undertaken in order to quantify the magnitude and determine the nature of this problem. This survey included the use of mailed questionnaires and personal interviews with County Engineers. Highway-related claims filed against counties in Iowa amounted to about $52,000,000 during the period 1973 through 1978. Over $30,000,000 in claims was pending at the end of 1978. Settlements of judgments were made at a cost of 12.2% of the amount claimed for those claims that had been disposed of, not including costs for handling claims, attorney fees, or court costs. There was no clear time trend in the amount of claims for the six-year period surveyed, although the anount claimed in 1978 was about double the average for the preceding five years. Problems that resulted in claims for damages from counties have generally related to alleged omissions in the use of traffic control devices or defects, often temporary, resulting from alleged inadequacies in highway maintenance. The absence of stop signs or warning signs often has been the central issue in a highway-related tort claim. Maintenance problems most frequently alleged have included inadequate shoulders, surface roughness, ice o? snow conditions, and loose gravel. The variation in the occurrence of tort claims among 85 counties in Iowa could not be related to any of the explanatory variables that were tested. Claims hppeared to have occurred randomly. However, using data from a subsample of 11 counties, a significant relationship was shown probably to exist between the amount of tort claims and the extensiveness of use of wcirning signs on the respective county road systems. Although there was no indication in any county that their use of warning signs did not conform with provisions of the Manual on Uniform Traffic Control Devices (Federal Highway Administration, Government Printing Office, Washington, D.C., 1978), many more warning signs were used in some counties than would be required to satisfy this minimum requirement. Sign vandalism reportedly is a problem in all counties. The threat of vandalism and the added costs incurred thereby have tended to inhibit more extensive use of traffic control devices. It also should be noted that there is no indication from this research of a correlation between the intensiveness of sign usage and highway safety. All highway maintenance activities introduce some extraordinary hazard for motorists. Generally effective methodologies have evolved for use on county road systems for routine maintenance activities, procedures that tend to reduce the hazard to practical and reasonably acceptable levels. Blading of loose-surfaced roads is an examples such a routine maintenance activity. Alternative patterns for blading that were investigated as part of this research offered no improvements in safety when compared with the method in current use and introduced a significant additional cost that was unacceptable, given the existing limitations in resources available for county roads.

L'exploitation des traces dans les accidents de la circulation

Les investigations dans le milieu des accidents de la circulation sont très complexes. Elles nécessitent la mise en oeuvre d'un grand nombre de spécialités venant de domaines très différents. Si certains de ces domaines sont déjà bien exploités, d'autres demeurent encore incomplets et il arrive de nos jours d'observer des lacunes dans la pratique, auxquelles il est primordial de remédier.Ce travail de thèse, intitulé « l'exploitation des traces dans les accidents de la circulation », est issu d'une réflexion interdisciplinaire entre de multiples aspects des sciences forensiques. Il s'agit principalement d'une recherche ayant pour objectif de démontrer les avantages découlant d'une synergie entre les microtraces et l'étude de la dynamique d'un accident. Afin de donner une dimension très opérationnelle à ce travail, l'ensemble des démarches entreprises a été axé de manière à optimiser l'activité des premiers intervenants sur les lieux.Après une partie introductive et ayant trait au projet de recherche, traitant des aspects théoriques de la reconstruction d'une scène d'accident, le lecteur est invité à prendre connaissance de cinq chapitres pratiques, abordés selon la doctrine « du général au particulier ». La première étape de cette partie pratique concerne l'étude de la morphologie des traces. Des séquences d'examens sont proposées pour améliorer l'interprétation des contacts entre véhicules et obstacles impliqués dans un accident. Les mécanismes de transfert des traces de peinture sont ensuite étudiés et une série de tests en laboratoire est pratiquée sur des pièces de carrosseries automobiles. Différents paramètres sont ainsi testés afin de comprendre leur impact sur la fragilité d'un système de peinture. Par la suite, une liste de cas traités (crash-tests et cas réels), apportant des informations intéressantes sur le traitement d'une affaire et permettant de confirmer les résultats obtenus est effectuée. Il s'ensuit un recueil de traces, issu de l'expérience pratique acquise et ayant pour but d'aiguiller la recherche et le prélèvement sur les lieux. Finalement, la problématique d'une banque de données « accident », permettant une gestion optimale des traces récoltées est abordée.---The investigations of traffic accidents are very complex. They require the implementation of a large number of specialties coming from very different domains. If some of these domains are already well exploited, others remain still incomplete and it happens nowadays to observe gaps in the practice, which it is essential to remedy. This thesis, entitled "the exploitation of traces in traffic accidents", arises from a multidisciplinary reflection between the different aspects of forensic science. It is primarily a research aimed to demonstrate the benefits of synergy between microtrace evidence and accidents dynamics. To give a very operational dimension to this work, all the undertaken initiatives were centred so as to optimise the activity of the first participants on the crime scene.After an introductory part treating theoretical aspects of the reconstruction of an accident scene the reader is invited to get acquainted with five practical chapters, according to the doctrine "from general to particular". For the first stage of this practical part, the problem of the morphology of traces is approached and sequences of examinations are proposed to improve the interpretation of the contacts between vehicles and obstacles involved in an accident. Afterwards, the mechanisms of transfer of traces of paint are studied and a series of tests in laboratory is practised on pieces of automobile bodies. Various parameters are thus tested to understand their impact on the fragility of a system of paint. It follows that a list of treated cases (crash-tests and real cases) is created, allowing to bring interesting information on the treatment of a case and confirm the obtained results. Then, this work goes on with a collection of traces, stemming from the acquired experience that aims to steer the research and the taking of evidence on scenes. Finally, the practical part of this thesis ends with the problem of a database « accident », allowing an optimal management of the collected traces.

Development and Demonstration of a Freezing Drizzle Algorithm for Roadway Environmental Sensing Systems, Final Report, October 2012

The primary goal of this project is to demonstrate the accuracy and utility of a freezing drizzle algorithm that can be implemented on roadway environmental sensing systems (ESSs). The types of problems related to the occurrence of freezing precipitation range from simple traffic delays to major accidents that involve fatalities. Freezing drizzle can also lead to economic impacts in communities with lost work hours, vehicular damage, and downed power lines. There are means for transportation agencies to perform preventive and reactive treatments to roadways, but freezing drizzle can be difficult to forecast accurately or even detect as weather radar and surface observation networks poorly observe these conditions. The detection of freezing precipitation is problematic and requires special instrumentation and analysis. The Federal Aviation Administration (FAA) development of aircraft anti-icing and deicing technologies has led to the development of a freezing drizzle algorithm that utilizes air temperature data and a specialized sensor capable of detecting ice accretion. However, at present, roadway ESSs are not capable of reporting freezing drizzle. This study investigates the use of the methods developed for the FAA and the National Weather Service (NWS) within a roadway environment to detect the occurrence of freezing drizzle using a combination of icing detection equipment and available ESS sensors. The work performed in this study incorporated the algorithm developed initially and further modified for work with the FAA for aircraft icing. The freezing drizzle algorithm developed for the FAA was applied using data from standard roadway ESSs. The work performed in this study lays the foundation for addressing the central question of interest to winter maintenance professionals as to whether it is possible to use roadside freezing precipitation detection (e.g., icing detection) sensors to determine the occurrence of pavement icing during freezing precipitation events and the rates at which this occurs.

Getting to know about health and safety related to products used in painting, drawing and printmakin

Practicing art is not a high risk activity. This statement, along with the creative, expressive and intangible aims of this activity, as well as the lack of information, promotion of safety awareness and training of thepeople in charge of art studios, may have pushed the implications of practicing art as regards health, safety and environment into the background. Faced with this prospect, a comprehensive study of the facilities and the activities carried out in art studios becomes necessary. The study concerns experimental activities involving Health and Safety risks for both the artists and the teachers and students, especially those carried out in the studios located in educational institutions.

Association of eGFR-Related Loci Identified by GWAS with Incident CKD and ESRD.

Family studies suggest a genetic component to the etiology of chronic kidney disease (CKD) and end stage renal disease (ESRD). Previously, we identified 16 loci for eGFR in genome-wide association studies, but the associations of these single nucleotide polymorphisms (SNPs) for incident CKD or ESRD are unknown. We thus investigated the association of these loci with incident CKD in 26,308 individuals of European ancestry free of CKD at baseline drawn from eight population-based cohorts followed for a median of 7.2 years (including 2,122 incident CKD cases defined as eGFR <60ml/min/1.73m(2) at follow-up) and with ESRD in four case-control studies in subjects of European ancestry (3,775 cases, 4,577 controls). SNPs at 11 of the 16 loci (UMOD, PRKAG2, ANXA9, DAB2, SHROOM3, DACH1, STC1, SLC34A1, ALMS1/NAT8, UBE2Q2, and GCKR) were associated with incident CKD; p-values ranged from p = 4.1e-9 in UMOD to p = 0.03 in GCKR. After adjusting for baseline eGFR, six of these loci remained significantly associated with incident CKD (UMOD, PRKAG2, ANXA9, DAB2, DACH1, and STC1). SNPs in UMOD (OR = 0.92, p = 0.04) and GCKR (OR = 0.93, p = 0.03) were nominally associated with ESRD. In summary, the majority of eGFR-related loci are either associated or show a strong trend towards association with incident CKD, but have modest associations with ESRD in individuals of European descent. Additional work is required to characterize the association of genetic determinants of CKD and ESRD at different stages of disease progression.

INTERMED predicts non-return to work in an occupational rehabilitation setting for individuals with orthopaedic trauma-part 2

Introduction.- The model presented in part I (19 predictors) had good predictive values for non-return to work 2 years after vocational rehabilitation for orthopaedic trauma. However, the number of predictors is high for the detection of patients at risk in a clinic. For example, the INTERMED for itself consists of 20 questions and needs 20 minutes to be filled in. For this reason, the aim of this study was to compare the predictive value of different models for the prediction of non-return to work.Patients and methods.- In this longitudinal prospective study, the cohort consisted of 2156 included inpatients with orthopaedic trauma attending a rehabilitation hospital after a work, traffic, sport or leisure related injury. Two years after discharge, 1502 patients returned a questionnaire regarding return to work. We compared the area under the receiver-operator-characteristics curve (ROC) between different models: INTERMED total score, the 4 partial INTERMED scores, the items of the most predictive partial score; with or without confounders.Results.- The ROC for the total score of the INTERMED plus the five confounders of the of the part one (qualified work, speaking French, lesion of upper extremity, education and age) was 0.72. The sole partial INTERMED score to predict return to work was the social sub score. The ROC for the five items of the latter sub score of the INTERMED was 0.69. The ROC for the five items of the social subscale of the INTERMED combined with five predictors was 0.73. This was significantly better than the use of only the five items from INTERMED alone (delta 0.034; 95% CI 0.017 to .050). The model presented in part I (INTERMED total score plus 18 predictors) was not significantly better than the five items INTERMED social score plus five confounders.Discussion.- The use of a model with ten variables (INTERMED social five items plus five confounders) has good predictive value to detect patients not returning to work after vocational rehabilitation after orthopaedic trauma. The parsimony of this model facilitates its use in a clinic for the detection of patients at risk.

Planning sleep-related animal and translational research

With the aim of improving human health, scientists have been using an approach referred to as translational research, in which they aim to convey their laboratory discoveries into clinical applications to help prevent and cure disease. Such discoveries often arise from cellular, molecular, and physiological studies that progress to the clinical level. Most of the translational work is done using animal models that share common genes, molecular pathways, or phenotypes with humans. In this article, we discuss how translational work is carried out in various animal models and illustrate its relevance for human sleep research and sleep-related disorders.