994 resultados para Vertical displacement measurement
Resumo:
[cat] Besley i Rosen -1998- van ser els primers autors en estimar empíricament la rellevància de les externalitats impositives verticals. Aquests autors varen fer-ho per al cas dels impostos sobre la benzina i el tabac, en concret, per al cas dels EEUU. Ara bé, no varen tenir en compte les diferències en el nivell de vida entre Estats: àrees amb un nivell elevat paguen menys en termes reals que àrees amb un nivell de vida baix, doncs l'impost unitari sobre la benzina o sobre el tabac no difereix d'acord amb l'Estat on l'impost s'aplica. En conseqüència, proposem que la competència impositiva vertical sigui estimada deflactant totes les variables monetàries utilitzant l'anomenat "House Price Index (HPI)", el qual està disponible al nivell dels Estats. Això genera una variable impositiva federal expressada en termes reals i que presenta variació entre Estats. Aquesta estratègia empírica ens permet diferenciar entre la interdependència vertical entre els tipus impositius federals i els estatals de shocks agregats al llarg del temps, utilitzant dades per als EEUU durant el període 1975 a 2006 per a benzina i tabac. Trobem una nivell significatiu de competència impositiva horitzontal, la qual és més elevada en el cas del tabac, però en cap cas reacció impositiva vertical. Els resultats són robustos al període analitzat.
Resumo:
The advances of the semiconductor industry enable microelectromechanical systems sensors, signal conditioning logic and network access to be integrated into a smart sensor node. In this framework, a mixed-mode interface circuit for monolithically integrated gas sensor arrays was developed with high-level design techniques. This interface system includes analog electronics for inspection of up to four sensor arrays and digital logic for smart control and data communication. Although different design methodologies were used in the conception of the complete circuit, high-level synthesis tools and methodologies were crucial in speeding up the whole design cycle, enhancing reusability for future applications and producing a flexible and robust component.
Resumo:
In this paper we show that the orthorhombic phase of FeSi2 (stable at room temperature) displays a sizable anisotropy in the infrared spectra, with minor effects in the Raman data too. This fact is not trivial at all, since the crystal structure corresponds to a moderate distortion of the fluorite symmetry. Our analysis is carried out on small single crystals grown by flux transport, through polarization-resolved far-infrared reflectivity and Raman measurements. Their interpretation has been obtained by means of the simulated spectra with tight-binding molecular dynamics.
Resumo:
The deficiency or excess of micronutrients has been determined by analyses of soil and plant tissue. In Brazil, the lack of studies that would define and standardize extraction and determination methods, as well as lack of correlation and calibration studies, makes it difficult to establish limits of concentration classes for analysis interpretation and fertilizer recommendations for crops. A specific extractor for soil analysis is sometimes chosen due to the ease of use in the laboratory and not in view of its efficiency in determining a bioavailable nutrient. The objectives of this study were to: (a) evaluate B concentrations in the soil as related to the fertilizer rate, soil depth and extractor; (b) verify the nutrient movement in the soil profile; (c) evaluate efficiency of Hot Water, Mehlich-1 and Mehlich-3 as available B extractors, using sunflower as test plant. The experimental design consisted of complete randomized blocks with four replications and treatments of five B rates (0, 2, 4, 6, and 8 kg ha-1) applied to the soil surface and evaluated at six depths (0-0.05, 0.05-0.10, 0.10-0.15, 0.15-0.20, 0.20-0.30, and 0.30-0.40 m). Boron concentrations in the soil extracted by Hot Water, Mehlich-1 and Mehlich-3 extractors increased linearly in relation to B rates at all depths evaluated, indicating B mobility in the profile. The extractors had different B extraction capacities, but were all efficient to evaluate bioavailability of the nutrient to sunflower. Mehlich-1 and Mehlich-3 can therefore be used to analyze B as well as Hot Water.
Resumo:
BACKGROUND: Positional therapy that prevents patients from sleeping supine has been used for many years to manage positional obstructive sleep apnea (OSA). However, patients' usage at home and the long term efficacy of this therapy have never been objectively assessed.¦METHODS: Sixteen patients with positional OSA who refused or could not tolerate continuous positive airway pressure (CPAP) were enrolled after a test night study (T0) to test the efficacy of the positional therapy device. The patients who had a successful test night were instructed to use the device every night for three months. Nightly usage was monitored by an actigraphic recorder placed inside the positional device. A follow-up night study (T3) was performed after three months of positional therapy.¦RESULTS: Patients used the device on average 73.7 ± 29.3% (mean ± SD) of the nights for 8.0 ± 2.0 h/night. 10/16 patients used the device more than 80% of the nights. Compared to the baseline (diagnostic) night, mean apnea-hypopnea index (AHI) decreased from 26.7 ± 17.5 to 6.0 ± 3.4 with the positional device (p<0.0001) during T0 night. Oxygen desaturation (3%) index also fell from 18.4 ± 11.1 to 7.1 ± 5.7 (p = 0.001). Time spent supine fell from 42.8 ± 26.2% to 5.8 ± 7.2% (p < 0.0001). At three months (T3), the benefits persisted with no difference in AHI (p = 0.58) or in time spent supine (p = 0.98) compared to T0 night. The Epworth sleepiness scale showed a significant decrease from 9.4 ± 4.5 to 6.6 ± 4.7 (p = 0.02) after three months.¦CONCLUSIONS: Selected patients with positional OSA can be effectively treated by a positional therapy with an objective compliance of 73.7% of the nights and a persistent efficacy after three months.
Resumo:
This article describes the ways in which cotton goods were commercialised during the nineteenth century and the first third of the twentieth. Several national cases are analysed: Britain, as the Workshop of the World; France, Germany, Switzerland and the US, as core economies; and Italy and Spain as countries on the European periphery. The main question that we address is why some cotton industries vertically integrated their production and commercialisation processes, but others did not. We present a model that combines industrial district size and product differentiation to explain why vertical integration was present in most cases and why there was vertical specialisation in Lancashire and Lowell.
Resumo:
[eng] A multi-sided Böhm-Bawerk assignment game (Tejada, to appear) is a model for a multilateral market with a finite number of perfectly complementary indivisible commodities owned by different sellers, and inflexible demand and support functions. We show that for each such market game there is a unique vector of competitive prices for the commodities that is vertical syndication-proof, in the sense that, at those prices, syndication of sellers each owning a different commodity is neither beneficial nor detrimental for the buyers. Since, moreover, the benefits obtained by the agents at those prices correspond to the nucleolus of the market game, we provide a syndication-based foundation for the nucleolus as an appropriate solution concept for market games. For different solution concepts a syndicate can be disadvantageous and there is no escape to Aumman’s paradox (Aumann, 1973). We further show that vertical syndicationproofness and horizontal syndication-proofness – in which sellers of the same commodity collude – are incompatible requirements under some mild assumptions. Our results build on a self-interesting link between multi-sided Böhm-Bawerk assignment games and bankruptcy games (O’Neill, 1982). We identify a particular subset of Böhm-Bawerk assignment games and we show that it is isomorphic to the whole class of bankruptcy games. This isomorphism enables us to show the uniqueness of the vector of vertical syndication-proof prices for the whole class of Böhm-Bawerk assignment market using well-known results of bankruptcy problems.
Resumo:
Abstract The aim of this study was to investigate changes in running mechanics and spring-mass behaviour with fatigue induced by 5-hour hilly running (5HHR). Running mechanics were measured pre- and post-5HHR at 10, 12 and 14 km · h(-1) on an instrumented treadmill in eight ultramarathon runners, and sampled at 1000 Hz for 10 consecutive steps. Contact (t(c) ) and aerial (t(a) ) times were determined from ground reaction force (GRF) signals and used to compute step frequency (f). Maximal GRF, loading rate, downward displacement of the centre of mass (Δz), and leg length change (ΔL) during the support phase were determined and used to compute both vertical (K(vert) ) and leg (K(leg) ) stiffness. A significant decrease in t(c) was observed at 12 and 14 km · h(-1) resulting in an increase of f at all speeds. Duty factor and F(max) significantly decreased at 10 km · h(-1). A significant increase in K(vert) and K(leg) was observed at all running speeds with significant decreases in Δz and ΔL. Despite the shorter duration, the changes in running mechanics appeared to be in the same direction (increased f and K(vert) , decrease in Δz and F(max) ) but of lower amplitude compared with those obtained after an ultra-trail or an ultramarathon.
Resumo:
[cat] Besley i Rosen -1998- van ser els primers autors en estimar empíricament la rellevància de les externalitats impositives verticals. Aquests autors varen fer-ho per al cas dels impostos sobre la benzina i el tabac, en concret, per al cas dels EEUU. Ara bé, no varen tenir en compte les diferències en el nivell de vida entre Estats: àrees amb un nivell elevat paguen menys en termes reals que àrees amb un nivell de vida baix, doncs l'impost unitari sobre la benzina o sobre el tabac no difereix d'acord amb l'Estat on l'impost s'aplica. En conseqüència, proposem que la competència impositiva vertical sigui estimada deflactant totes les variables monetàries utilitzant l'anomenat "House Price Index (HPI)", el qual està disponible al nivell dels Estats. Això genera una variable impositiva federal expressada en termes reals i que presenta variació entre Estats. Aquesta estratègia empírica ens permet diferenciar entre la interdependència vertical entre els tipus impositius federals i els estatals de shocks agregats al llarg del temps, utilitzant dades per als EEUU durant el període 1975 a 2006 per a benzina i tabac. Trobem una nivell significatiu de competència impositiva horitzontal, la qual és més elevada en el cas del tabac, però en cap cas reacció impositiva vertical. Els resultats són robustos al període analitzat.
Resumo:
The paracaspase MALT1 is a Cys-dependent, Arg-specific protease that plays an essential role in the activation and proliferation of lymphocytes during the immune response. Oncogenic activation of MALT1 is associated with the development of specific forms of B-cell lymphomas. Through specific cleavage of its substrates, MALT1 controls various aspects of lymphocyte activation, including the activation of transcriptional pathways, the stabilization of mRNAs, and an increase in cellular adhesion. In lymphocytes, the activity of MALT1 is tightly controlled by its inducible monoubiquitination, which promotes the dimerization of MALT1. Here, we describe both in vitro and in vivo assays that have been developed to assess MALT1 activity.
Resumo:
The measurement of pavement roughness has been the concern of highway engineers for more than 70 years. This roughness is referred to as "riding quality" by the traveling public. Pavement roughness evaluating devices have attempted to place either a graphical or numerical value on the public's riding comfort or discomfort. Early graphical roughness recorders had many different designs. In 1900 an instrument called the "Viagraph" was developed by an Irish engineer.' The "Viagraph" consisted of a twelve foot board with graphical recorder drawn over the pavement. The "Profilometer" built in Illinois in 1922 was much more impressive. ' The instrument's recorder was mounted on a frame supported by 32 bicycle wheels mounted in tandem. Many other variations of profilometers with recorders were built but most were difficult to handle and could not secure uniformly reproducible results. The Bureau of Public Roads (BPR) Road Roughness Indicator b u i l t in 1941 is the most widely used numerical roughness recorder.' The BPR Road Roughness Indicator consists of a trailer unit with carefully selected springs, means of dampening, and balanced wheel.
Resumo:
Background: TIDratio indirectly reflects myocardial ischemia and is correlated with cardiacprognosis. We aimed at comparing the influence of three different softwarepackages for the assessment of TID using Rb-82 cardiac PET/CT. Methods: Intotal, data of 30 patients were used based on normal myocardial perfusion(SSS<3 and SRS<3) and stress myocardial blood flow 2mL/min/g)assessed by Rb-82 cardiac PET/CT. After reconstruction using 2D OSEM (2Iterations, 28 subsets), 3-D filtering (Butterworth, order=10, ωc=0.5), data were automatically processed, and then manually processed fordefining identical basal and apical limits on both stress and rest images.TIDratio were determined with Myometrix®, ECToolbox® and QGS®software packages. Comparisons used ANOVA, Student t-tests and Lin concordancetest (ρc). Results: All of the 90 processings were successfullyperformed. TID ratio were not statistically different between software packageswhen data were processed automatically (P=0.2) or manually (P=0.17). There was a slight, butsignificant relative overestimation of TID with automatic processing incomparison to manual processing using ECToolbox® (1.07 ± 0.13 vs 1.0± 0.13, P=0.001)and Myometrix® (1.07 ± 0.15 vs 1.01 ± 0.11, P=0.003) but not using QGS®(1.02 ±0.12 vs 1.05 ± 0.11, P=0.16). The best concordance was achieved between ECToolbox®and Myometrix® manual (ρc=0.67) processing.Conclusion: Using automatic or manual mode TID estimation was not significantlyinfluenced by software type. Using Myometrix® or ECToolbox®TID was significantly different between automatic and manual processing, butnot using QGS®. Software package should be account for when definingTID normal reference limits, as well as when used in multicenter studies. QGS®software seemed to be the most operator-independent software package, whileECToolbox® and Myometrix® produced the closest results.