Finite-Element Analysis of Stress on Dental Implant Prosthesis

Background: Understanding how clinical variables affect stress distribution facilitates optimal prosthesis design and fabrication and may lead to a decrease in mechanical failures as well as improve implant longevity. Purpose: In this study, the many clinical variations present in implant-supported prosthesis were analyzed by 3-D finite element method. Materials and Method: A geometrical model representing the anterior segment of a human mandible treated with 5 implants supporting a framework was created to perform the tests. The variables introduced in the computer model were cantilever length, elastic modulus of cancellous bone, abutment length, implant length, and framework alloy (AgPd or CoCr). The computer was programmed with physical properties of the materials as derived from the literature, and a 100N vertical load was used to simulate the occlusal force. Images with the fringes of stress were obtained and the maximum stress at each site was plotted in graphs for comparison. Results: Stresses clustered at the elements closest to the loading point. Stress increase was found to be proportional to the increase in cantilever length and inversely proportional to the increase in the elastic modulus of cancellous bone. Increasing the abutment length resulted in a decrease of stress on implants and framework. Stress decrease could not be demonstrated with implants longer than 13 mm. A stiffer framework may allow better stress distribution. Conclusion: The relative physical properties of the many materials involved in an implant-supported prosthesis system affect the way stresses are distributed.

Timing and duration of the last interglacial inferred from high resolution U-series chronology of stalagmite growth in Southern Hemisphere

High-precision Th-230-U-238 ages for a stalagmite from Newdegate Cave in southern Tasmania, Australia define a rare record of precipitation between 100 and 155 ka before the present. The fastest stalagmite growth occurred between 129.2 +/- 1.6 and 122.1 +/- 2.0 ka (similar to 61.5 mm/ka), coinciding with a time of prolific coral growth from Western Australia (128-122 ka). This is the first high-resolution continental record in the Southern Hemisphere that can be compared and correlated with the marine record. Such correlation shows that in southern Australia the onset of full interglacial sea level and the initiation of highest precipitation on land were synchronous. The stalagmite growth rate between 129.2 and 142.2 ka (similar to 5.9 mm/ka) was lower than that between 142.2 and 154.5 ka (similar to 18.7 mm/ka), implying drier conditions during the Penultimate Deglaciation, despite rising temperature and sea level. This asymmetrical precipitation pattern is caused by latitudinal movement of subtropical highs and an associated Westerly circulation, in response to a changing Equator-to-Pole temperature gradient. Both marine and continental records in Australia strongly suggest that the insolation maximum between 126 and 128 ka at 65 degreesN was directly responsible for the maintenance of full Last Interglacial conditions, although the triggers that initiated Penultimate Deglaciation (at similar to 142 ka) remain unsolved. (C) 2001 Elsevier Science B.V. All rights reserved.

Quantum criticality

We investigate the theory of quantum fluctuations in non-equilibrium systems having large critical fluctuations. This allows us to treat the limits imposed by nonlinearities to quantum squeezing and noise reduction, and also to envisage future tests of quantum theory in regions of macroscopic quantum fluctuations. A long-term objective of this research is to identify suitable physical systems in which macroscopic 'Schrodinger cat'-like behaviour may be observed. We investigate two systems in particular of much current experimental interest, namely the degenerate parametric oscillator near threshold, and the evaporatively cooled (BEC). We compare the results obtained in the positive-P representation, as a fully quantum mechanical calculation, with the truncated Wigner phase space equation, also known as semi-classical theory. We show when these results agree and differ in calculations taken beyond the linearized approximation. In the region where the largest quantum fluctuations and Schrodinger cat-like behaviour might be expected, we find that the quantum predictions correspond very closely to the semi-classical theory. Nature abhors observing a Schrodinger car.

Development of a short-term model using petrophysical logging at Century Mine, North Queensland

Pasminco Century Mine has developed a geophysical logging system to provide new data for ore mining/grade control and the generation of Short Term Models for mine planning. Previous work indicated the applicability of petrophysical logging for lithology prediction, however, the automation of the method was not considered reliable enough for the development of a mining model. A test survey was undertaken using two diamond drilled control holes and eight percussion holes. All holes were logged with natural gamma, magnetic susceptibility and density. Calibration of the LogTrans auto-interpretation software using only natural gamma and magnetic susceptibility indicated that both lithology and stratigraphy could be predicted. Development of a capability to enforce stratigraphic order within LogTrans increased the reliability and accuracy of interpretations. After the completion of a feasibility program, Century Mine has invested in a dedicated logging vehicle to log blast holes as well as for use in in-fill drilling programs. Future refinement of the system may lead to the development of GPS controlled excavators for mining ore.

Violation of multiparticle Bell inequalities for low- and high-flux parametric amplification using both vacuum and entangled input states

We show how polarization measurements on the output fields generated by parametric down conversion will reveal a violation of multiparticle Bell inequalities, in the regime of both low- and high-output intensity. In this case, each spatially separated system, upon which a measurement is performed, is comprised of more than one particle. In view of the formal analogy with spin systems, the proposal provides an opportunity to test the predictions of quantum mechanics for spatially separated higher spin states. Here the quantum behavior possible even where measurements are performed on systems of large quantum (particle) number may be demonstrated. Our proposal applies to both vacuum-state signal and idler inputs, and also to the quantum-injected parametric amplifier as studied by De Martini The effect of detector inefficiencies is included, and weaker Bell-Clauser-Horne inequalities are derived to enable realistic tests of local hidden variables with auxiliary assumptions for the multiparticle situation.

Modified logit life table system: Principles, empirical validation, and application

Despite its widespread use, the Coale-Demeny model life table system does not capture the extensive variation in age-specific mortality patterns observed in contemporary populations, particularly those of the countries of Eastern Europe and populations affected by HIV/AIDS. Although relational mortality models, such as the Brass logit system, can identify these variations, these models show systematic bias in their predictive ability as mortality levels depart from the standard. We propose a modification of the two-parameter Brass relational model. The modified model incorporates two additional age-specific correction factors (gamma(x), and theta(x)) based on mortality levels among children and adults, relative to the standard. Tests of predictive validity show deviations in age-specific mortality rates predicted by the proposed system to be 30-50 per cent lower than those predicted by the Coale-Demeny system and 15-40 per cent lower than those predicted using the original Brass system. The modified logit system is a two-parameter system, parameterized using values of l(5) and l(60).

Avalia????o de pol??ticas de financiamento a micro e pequenas empresas na gera????o de postos de trabalho: o caso do Proger ??? principais aspectos

O artigo se prop??e a apresentar os principais aspectos e resultados de uma nova metodologia de avalia????o de programas de financiamento a micro e pequenas empresas aplicada ao Programa de Gera????o de Emprego e Renda na ??rea urbana ??? Proger urbano, tanto no que se refere aos seus custos efetivos, at?? ent??o desconhecidos, quanto no que se refere ao seu impacto sobre a gera????o de empregos, estimado utilizando dados prim??rios oriundos do cruzamento de dois bancos de dados do Minist??rio do Trabalho e Emprego, quais sejam, o do Sistema de Acompanhamento da Execu????o do Proger (Saep), e o do Cadastro Geral de Empregados e Desempregados. S??o apresentados, preliminarmente, alguns dos resultados de duas avalia????es anteriores do programa, uma realizada pelo Ibase, atrav??s de question??rios aos benefici??rios do programa, e outra, uma primeira experi??ncia de cruzamento dos dois referidos bancos de dados, que serviu de base para a avalia????o que se apresenta.

Gerenciamento proteano de carreira entre universitários

A partir da segunda metade do século XX, mudanças no modo de produção capitalista começaram a afetar a relação que as empresas estabeleciam com o trabalhador. Diante de um mercado imprevisível, a carreira tradicional, marcada, entre outros aspectos, por empregos duradouros e com possibilidade de ascensão na hierarquia da organização, tornou-se menos recorrente. Paralelamente, começaram a despontar novas concepções sobre carreira, tendo a maioria um enfoque individualista. Dentre as novas proposições, o presente estudo tomou como referência a concepção de carreira proteana. Esse modelo, de origem norte-americana, tem como ideia central a noção de uma carreira que é gerida pelo indivíduo, e tem como meta o alcance do sucesso psicológico. Desta forma, ancora-se em duas principais dimensões: autogerenciamento e direcionamento para valores. Considerando os diversos estudos que descrevem as dificuldades enfrentadas por estudantes na transição da universidade para o mercado de trabalho, esta pesquisa objetivou compreender aspectos do gerenciamento proteano de carreira entre universitários brasileiros que já tinham concluído, pelo menos, a primeira metade do curso de graduação. Para tanto, o estudo foi dividido em dois artigos. O primeiro foi destinado ao desenvolvimento e validação da Escala de Atitudes de Carreira Proteana para universitários, tendo sido realizado com uma amostra de 1016 estudantes de 37 cursos diferentes, com idade variando entre 18 e 65 anos, e média de 24,52 (DP = 6,69 anos). O instrumento, denominado neste estudo de Escala de Gerenciamento Proteano de Carreira para Universitários (EGPC-U) atestou a estrutura de duas dimensões, evidenciada também na versão original da medida. Os índices de confiabilidade foram satisfatórios e superiores a 12 0,61, tendo o instrumento a possibilidade de ser utilizado em serviços de orientação profissional ou de carreira. O segundo artigo objetivou compreender como as dimensões do modelo proteano se relacionam com variáveis sóciodemográficas e com construtos psicossociais: personalidade, lócus de controle, saúde e satisfação com a vida, e envolveu alunos de duas áreas de conhecimento: humanas e exatas. A amostra foi composta por 525 alunos, sendo 245 da área de humanas e 280 de exatas, sendo 52% do sexo masculino. A idade dos participantes variou entre 18 e 30 anos e média de 22,59 anos (DP = 2,66 anos). A partir dos resultados do estudo 2, constatou-se que alunos da área de humanas, quando comparados a estudantes de exatas, tendem a apresentar média superior na dimensão de direcionamento para valores. Verificou-se ainda que os aspectos de conscienciosidade e lócus de controle interno são preditores significativos do autogerenciamento tanto entre alunos de humanas como de exatas e que a adoção de atitudes proteanas tende a impactar positivamente aspectos da saúde e da satisfação com a vida do indivíduo. O estudo, de um modo geral, permitiu verificar a existência de características proteanas entre universitários, como também possibilitou conhecer variáveis relacionadas às atitudes de autogerenciamento e direcionamento para valores. Destaca-se, porém, a necessidade de pesquisas complementares com a exploração de outras variáveis psicossociais que possam estar relacionadas ao gerenciamento proteano entre graduandos.

Estudo da Influência do Número de Acidez Total e Teor de Enxofre Total nas Frações Destiladas no Processo de Corrosão em Aços do Tipo AISI 1020 e AISI 316

Os danos causados pelos processos corrosivos em equipamentos presentes nas refinarias de petróleo, durante as destilações, foram descritos inicialmente em 1920. Inúmeras são as referências reportando estudos de processos corrosivos envolvendo tanto os ácidos naftênicos como os compostos sulfurados; em contrapartida, raras são as fontes de estudo envolvendo simultaneamente ambos. Neste trabalho, escolheram-se dois tipos de óleos: um óleo A - com alto teor de enxofre e um petróleo B com elevada acidez. Fez-se então um blend 50/50 em volume obtendo assim o óleo C para verificar a influência tanto da acidez quanto dos teores de enxofre nos processos corrosivos pelos cortes destes óleos. Após a destilação das três amostras, os derivados obtidos foram caracterizados e submetidos aos testes laboratoriais de corrosão. Os cortes do petróleo A apresentaram teores de enxofre e taxas de corrosão crescentes em função do aumento da temperatura final dos derivados, apresentando uma corrosão máxima de 1,66 mm/ano e produtos de corrosão como troilita (FeS) e pirrota (Fe1-xS). As frações de B apresentaram altos valores de NAT na faixa de temperatura de 220-400 °C, enquanto as taxas de corrosão foram de 0,83 mm/ano para esta faixa de temperatura; os produtos de corrosão encontrados foram o óxido de ferro (Fe2O3) e goetite (α-FeOOH). Por fim, os derivados do blend C, apresentaram propriedades intermediárias aos cortes anteriores o que corroborou para taxas de corrosão menores de 0,50 mm/ano até uma temperatura de 300 °C, expondo assim, a eficiência em utilizar a técnica de misturas de petróleos para o refino.

Knowledge cities: a taxonomy for analyzing software and information service clusters

Software and information services (SIS) have become a field of increasing opportunities for international trade due to the worldwide diffusion of a combination of technological and organizational innovations. In several regions, the software industry is organized in clusters, usually referred to as "knowledge cities" because of the growing importance of knowledge-intensive services in their economy. This paper has two primary objectives. First, it raises three major questions related to the attractiveness of different cities in Argentina and Brazil for hosting software companies and to their impact on local development. Second, a new taxonomy is proposed for grouping clusters according to their dominant business segment, ownership pattern and scope of operations. The purpose of this taxonomy is to encourage further studies and provide an exploratory analytical tool for analyzing software clusters.

Compression Efficiency Analysis of Wyner-Ziv Video Coding with Motion Compensated Side Information Interpolation

The Wyner-Ziv video coding (WZVC) rate distortion performance is highly dependent on the quality of the side information, an estimation of the original frame, created at the decoder. This paper, characterizes the WZVC efficiency when motion compensated frame interpolation (MCFI) techniques are used to generate the side information, a difficult problem in WZVC especially because the decoder only has available some reference decoded frames. The proposed WZVC compression efficiency rate model relates the power spectral of the estimation error to the accuracy of the MCFI motion field. Then, some interesting conclusions may be derived related to the impact of the motion field smoothness and the correlation to the true motion trajectories on the compression performance.

Revestimentos descontínuos de coberturas: análise da normalização europeia aplicável

Esta dissertação tem como principais objectivos analisar a conformidade das características de revestimentos descontínuos de coberturas produzidos ou comercializados em Portugal com as exigências preconizadas nas normas europeias aplicáveis. Contudo, e tendo em conta a diversidade do tema, o presente estudo centralizou-se em três tipos de revestimentos descontínuos: fibrocimento, metais e plásticos. Optou-se por uma abordagem teórica complementada por uma campanha experimental. No caso da primeira, serão descritas as características de uma cobertura inclinada e alguns dos principais tipos de revestimentos descontínuos existentes. No que concerne à campanha experimental, para além da pesquisa efectuada ao nível do mercado nacional e dos contactos desenvolvidos para a recolha de amostras, realizaram-se ensaios de natureza geométrica de todas as amostras recolhidas. Em suma, a presente dissertação foi validada através de uma campanha experimental simples, que consistiu na análise do cumprimento das exigências das normas europeias aplicáveis aos produtos ensaiados, resultando numa avaliação crítica aos valores obtidos.

Assessing the effects of global warming and local social and economic conditions on the malaria transmission

OBJECTIVE: To show how a mathematical model can be used to describe and to understand the malaria transmission. METHODS: The effects on malaria transmission due to the impact of the global temperature changes and prevailing social and economic conditions in a community were assessed based on a previously presented compartmental model, which describes the overall transmission of malaria. RESULTS/CONCLUSIONS: The assessments were made from the scenarios produced by the model both in steady state and dynamic analyses. Depending on the risk level of malaria, the effects on malaria transmission can be predicted by the temperature ambient or local social and-economic conditions.

Detection of anti-Giardia lamblia serum antibody among children of day care centers

OBJETIVES: To detect anti-Giardia lamblia serum antibodies in healthy children attending public day care centers and to assess serological tests as tools for estimating the prevalence of G. lamblia in endemic areas. METHODS: Three separate stool specimens and filter paper blood samples were collected from 147 children ranging from 0 to 6 years old. Each stool sample was processed using spontaneous sedimentation and zinc sulfate flotation methods. Blood samples were tested by indirect immunofluorescence (IIF) and enzyme-linked immunosorbent assay (ELISA) for Giardia IgG. RESULTS AND CONCLUSIONS: Of 147 individuals tested, 93 (63.3%) showed Giardia cysts in their feces. Using IIF and ELISA, serum antibodies were detected in 93 (63.3%) and 100 (68%) samples , respectively. Sensitivity of IIF and ELISA was 82% and 72%, respectively. However, ELISA revealed to be less specific (39%) than IIF (70%). IIF also showed a higher concordance with microscopic examination than ELISA.

Mobi_System: A Personal Travel Assistance for Electrical Vehicles in Smart Cities

In this work it is proposed the design of a mobile system to assist car drivers in a smart city environment oriented to the upcoming reality of Electric Vehicles (EV). Taking into account the new reality of smart cites, EV introduction, Smart Grids (SG), Electrical Markets (EM), with deregulation of electricity production and use, drivers will need more information for decision and mobility purposes. A mobile application to recommend useful related information will help drivers to deal with this new reality, giving guidance towards traffic, batteries charging process, and city mobility infrastructures (e. g. public transportation information, parking places availability and car & bike sharing systems). Since this is an upcoming reality with possible process changes, development must be based on agile process approaches (Web services).