Automation of Chemical Spray Pyrolysis Unit and Fabrication of Sprayed CuInS2/In2S3 Solar Cell

Aim of the present work was to automate CSP process, to deposit and characterize CuInS2/In2S3 layers using this system and to fabricate devices using these films.An automated spray system for the deposition of compound semiconductor thin films was designed and developed so as to eliminate the manual labour involved in spraying and facilitate standardization of the method. The system was designed such that parameters like spray rate, movement of spray head, duration of spray, temperature of substrate, pressure of carrier gas and height of the spray head from the substrate could be varied. Using this system, binary, ternary as well as quaternary films could be successfully deposited.The second part of the work deal with deposition and characterization of CuInS2 and In2S3 layers respectively.In the case of CuInS2 absorbers, the effects of different preparation conditions and post deposition treatments on the optoelectronic, morphological and structural properties were investigated. It was observed that preparation conditions and post deposition treatments played crucial role in controlling the properties of the films. The studies in this direction were useful in understanding how the variation in spray parameters tailored the properties of the absorber layer. These results were subsequently made use of in device fabrication process.Effects of copper incorporation in In2S3 films were investigated to find how the diffusion of Cu from CuInS2 to In2S3 will affect the properties at the junction. It was noticed that there was a regular variation in the opto-electronic properties with increase in copper concentration.Devices were fabricated on ITO coated glass using CuInS2 as absorber and In2S3 as buffer layer with silver as the top electrode. Stable devices could be deposited over an area of 0.25 cm2, even though the efficiency obtained was not high. Using manual spray system, we could achieve devices of area 0.01 cm2 only. Thus automation helped in obtaining repeatable results over larger areas than those obtained while using the manual unit. Silver diffusion on the cells before coating the electrodes resulted in better collection of carriers.From this work it was seen CuInS2/In2S3 junction deposited through automated spray process has potential to achieve high efficiencies.

Enhanced shape anisotropy and magneto-optical birefringence by high energy ball milling in NixFe1−xFe2O4 ferrofluids

Ferrofluids belonging to the series NixFe1 xFe2O4 were synthesised by two different procedures—one by standard co-precipitation techniques, the other by co-precipitation for synthesis of particles and dispersion aided by high-energy ball milling with a view to understand the effect of strain and size anisotropy on the magneto-optical properties of ferrofluids. The birefringence measurements were carried out using a standard ellipsometer. The birefringence signal obtained for chemically synthesised samples was satisfactorily fitted to the standard second Langevin function. The ball-milled ferrofluids showed a deviation and their birefringence was enhanced by an order. This large enhancement in the birefringence value cannot be attributed to the increase in grain size of the samples, considering that the grain sizes of sample synthesised by both modes are comparable; instead, it can be attributed to the lattice strain-induced shape anisotropy(oblation) arising from the high-energy ball-milling process. Thus magnetic-optical (MO) signals can be tuned by ball-milling process, which can find potential applications.

Enhanced shape anisotropy and magneto-optical birefringence by high energy ball milling in NixFe1 xFe2O4 ferrofluids

Ferrofluids belonging to the series NixFe1 xFe2O4 were synthesised by two different procedures—one by standard co-precipitation techniques, the other by co-precipitation for synthesis of particles and dispersion aided by high-energy ball milling with a view to understand the effect of strain and size anisotropy on the magneto-optical properties of ferrofluids. The birefringence measurements were carried out using a standard ellipsometer. The birefringence signal obtained for chemically synthesised samples was satisfactorily fitted to the standard second Langevin function. The ball-milled ferrofluids showed a deviation and their birefringence was enhanced by an order. This large enhancement in the birefringence value cannot be attributed to the increase in grain size of the samples, considering that the grain sizes of sample synthesised by both modes are comparable; instead, it can be attributed to the lattice strain-induced shape anisotropy(oblation) arising from the high-energy ball-milling process. Thus magnetic-optical (MO) signals can be tuned by ball-milling process, which can find potential applications

Reinforcement Learning Solution for Unit Commitment Problem Considering Minimum Start Up and Shut Down Times

Unit Commitment Problem (UCP) in power system refers to the problem of determining the on/ off status of generating units that minimize the operating cost during a given time horizon. Since various system and generation constraints are to be satisfied while finding the optimum schedule, UCP turns to be a constrained optimization problem in power system scheduling. Numerical solutions developed are limited for small systems and heuristic methodologies find difficulty in handling stochastic cost functions associated with practical systems. This paper models Unit Commitment as a multi stage decision making task and an efficient Reinforcement Learning solution is formulated considering minimum up time /down time constraints. The correctness and efficiency of the developed solutions are verified for standard test systems

Reinforcement Learning solution for Unit Commitment Problem through pursuit method

Unit commitment is an optimization task in electric power generation control sector. It involves scheduling the ON/OFF status of the generating units to meet the load demand with minimum generation cost satisfying the different constraints existing in the system. Numerical solutions developed are limited for small systems and heuristic methodologies find difficulty in handling stochastic cost functions associated with practical systems. This paper models Unit Commitment as a multi stage decision task and Reinforcement Learning solution is formulated through one efficient exploration strategy: Pursuit method. The correctness and efficiency of the developed solutions are verified for standard test systems

Hybrid Power System Modelling - Simulation and Energy Management Unit Development

Weltweit leben mehr als 2 Milliarden Menschen in ländlichen Gebieten. Als Konzept für die elektrische Energieversorgung solcher Gebiete kommen dezentrale elektrische Energieversorgungseinheiten zum Einsatz, die lokal verfügbare erneuerbare Ressourcen nutzen. Stand der Technik bilden Einheiten, die auf PV-Diesel-Batterie System basieren. Die verwendeten Versorgungsskonzepte in Hybridsystemen sind durch den Einsatz von Batterien als Energiespeicher meist wenig zuverlässig und teuer. Diese Energiespeicher sind sehr aufwendig zu überwachen und schwerig zu entsorgen. Den Schwerpunkt dieser Arbeit bildet die Entwicklung eines neuen Hybridsystems mit einem Wasserreservoir als Energiespeicher. Dieses Konzept eignet sich für Bergregionen in Entwicklungsländern wie Nepal, wo z.B. neben der solaren Strahlung kleine Flüsse in großer Anzahl vorhanden sind. Das Hybridsystem verfügt über einen Synchrongenerator, der die Netzgrößen Frequenz und Spannung vorgibt und zusätzlich unterstützen PV und Windkraftanlage die Versorgung. Die Wasserkraftanlage soll den Anteil der erneuerbaren Energienutzung erhöhen. Die Erweiterung des Systems um ein Dieselaggregat soll die Zuverlässigkeit der Versorgung erhöhen. Das Hybridsystem inkl. der Batterien wird modelliert und simuliert. Anschließend werden die Simulations- und Messergebnisse verglichen, um eine Validierung des Modells zu erreichen. Die Regelungsstruktur ist aufgrund der hohen Anzahl an Systemen und Parametern sehr komplex. Sie wird mit dem Simulationstool Matlab/Simulink nachgebildet. Das Verhalten des Gesamtsystems wird unter verschiedene Lasten und unterschiedlichen meteorologischen Gegebenheiten untersucht. Ein weiterer Schwerpunkt dieser Arbeit ist die Entwicklung einer modularen Energiemanagementeinheit, die auf Basis der erneuerbaren Energieversorgung aufgebaut wird. Dabei stellt die Netzfrequenz eine wichtige Eingangsgröße für die Regelung dar. Sie gibt über die Wirkleistungsstatik die Leistungsänderung im Netz wider. Über diese Angabe und die meteorologischen Daten kann eine optimale wirtschaftliche Aufteilung der Energieversorgung berechnet und eine zuverlässige Versorgung gewährleistet werden. Abschließend wurde die entwickelte Energiemanagementeinheit hardwaretechnisch aufgebaut, sowie Sensoren, Anzeige- und Eingabeeinheit in die Hardware integriert. Die Algorithmen werden in einer höheren Programmiersprache umgesetzt. Die Simulationen unter verschiedenen meteorologischen und netztechnischen Gegebenheiten mit dem entwickelten Model eines Hybridsystems für die elektrische Energieversorgung haben gezeigt, dass das verwendete Konzept mit einem Wasserreservoir als Energiespeicher ökologisch und ökonomisch eine geeignete Lösung für Entwicklungsländer sein kann. Die hardwaretechnische Umsetzung des entwickelten Modells einer Energiemanagementeinheit hat seine sichere Funktion bei der praktischen Anwendung in einem Hybridsystem bestätigen können.

Kin-Ball : deporte y respeto, de la mano.

Resumen basado en la publicación

El ball de saló com a exercici físic en els ancians que assisteixen a la Caja de Compensación Familiar (Confamiliares) de la ciutat de Manizales (Colòmbia).

Se muestran esquemas. Resumen tomado del autor

Visita Arió : les tecnologies de la informació i la comunicació al Regne Unit. 'Visita Arión : las tecnologías de la información y la comunicación en el Reino Unido'.

Documento en formato electrónico (PDF)

wrecking ball

wrecking ball

Dansa i ball de saló.'Danza y baile de salón'.

Se expone una unidad didáctica dedicada a la educación artística y musical. Se estructura en una presentación de objetivos, contenidos, metodología y material destinado al profesorado donde se exponen toda una serie de bailes de todo el mundo. A continuación se adjuntan una serie de actividades dirigidas a los alumnos, relacionadas con la danza, la música y su localización geográfica.

La ventilazione non-invasiva a pressione positiva nell’insufficienza respiratoria acuta ipercapnica: 10 anni di esperienza clinica di una Unità di Terapia Semi-Intensiva Respiratoria

PremessaSebbene numerosi studi prospettici, controllati e randomizzati abbiano dimostrato il successo della ventilazione non-invasiva a pressione positiva (NIV) in casi selezionati di insufficienza respiratoria acuta ipercapnica (IRA) in setting con intensità di cura differenti, i dati di pratica clinica relativi all’uso della NIV nel “mondo reale” sono limitati. Scopo Riportare i risultati della nostra esperienza clinica sulla NIV nell’IRA applicata nell’Unità di Terapia Semi-Intensiva Respiratoria (UTSIR) allocata all’interno dell’Unità Operativa di Pneumologia di Arezzo negli anni 1996-2006 in termini di: tollerabilità, effetti sui gas ematici, tasso di successo e fattori predittivi del fallimento.MetodiTrecentocinquanta dei 1484 pazienti (23.6%) consecutivamente ammessi per IRA nella nostra Unità Operativa di Pneumologia durante il periodo di studio hanno ricevuto la NIV in aggiunta alla terapia standard, in seguito al raggiungimento di criteri predefiniti impiegati di routine.RisultatiOtto pazienti (2.3%) non hanno tollerato la NIV per discomfort alla maschera, mentre i rimanenti 342 (M: 240, F: 102; età: mediana (interquartili) 74.0 (68.0-79.3) anni; BPCO: 69.3%) sono stati ventilati per >1 ora. I gas ematici sono significativamente migliorati dopo 2 ore di NIV (media (deviazione standard) pH: 7.33 (0.07) versus 7.28 (7.25-7.31), p<0.0001; PaCO2: 71.4 (15.3) mmHg versus 80.8 (16.6) mmHg, p<0.0001; PaO2/FiO2: 205 (61) versus 183 (150-222), p<0.0001). La NIV ha evitato l’intubazione in 285/342 pazienti (83.3%) con una mortalità ospedaliera del 14.0%. Il fallimento della NIV è risultato essere predetto in modo indipendente dall’Apache III (Acute Physiology and Chronic Health Evaluation III) score, dall’indice di massa corporea e dal fallimento tardivo della NIV (> 48 ore di ventilazione) dopo iniziale risposta positiva.ConclusioniSecondo la nostra esperienza clinica di dieci anni realizzata in una UTSIR, la NIV si conferma essere ben tollerata, efficace nel migliorare i gas ematici e utile nell’evitare l’intubazione in molti episodi di IRA non-responsivi alla terapia standard.

Psychological intervention in an only multifamily session at an Acute Care Unit of a psychiatric clinic

This article provides an overview of the psychological intervention in a Unit Care of Mental Health. The objectives and therapeutic actions to follow are defined through the participation of an interdisciplinary team and networking; it includes support groups and, especially, the families of patients that suffer a severe mental disorder. The materials and resources used were weekly sessions of one hour and forty minutes, for two years of monitoring (2005-2007). The study population consists of families of patients with different pathologies, which are in the Intensive Care Unit. In terms of design, it is made a qualitativeanalysis of 100 field day formats, and fills a matrix of content analysis. It is reviewed the objectives, the approach Multi-Focus, methodology, used techniques, the procedures developed and the feedback given at each session. The findings from this study show that mental disorders are related to the environment in which the patient is developed and complex social process. They also suggest a greater need for psychiatric patient care and its networks, timely and relevantly. By the other hand, it shows the importance of increasing efforts to make available in the field of mental health brief strategic interventions in interdisciplinary teams, it is appropriate a psycho educational and therapeutic approach in which the actions are coordinated at different levels.

Efectividad en la canalización yugular guiada por ecografía usando tres diferentes técnicas. Experimento en modelos simulados.

Introducción: El desarrollo tecnológico permite efectuar procedimientos eficientes en pacientes críticos de urgencias como canalizar vasos centrales guiados por ecografía. Éste procedimiento comparado con la técnica a ciegas ofrece ventajas como disminución de complicaciones, mejor éxito y menor tiempo de procedimiento. Hay diferentes técnicas de abordaje: transversal, longitudinal y oblicua, lo que supone diferencias en la efectividad y éxito en cada una de ellas. Materiales y métodos: Se realizó un experimento en modelos simulados con especialistas y residentes de último año de medicina de emergencias. Posterior a estandarizar los conceptos y abordajes de cada una de las técnicas, se puncionaron los modelos para determinar cuál técnica presenta mayor éxito y efectividad para canalización yugular con guía ecográfica. Resultados: El procedimiento fue efectivo en 175 réplicas (97.2%) distribuidas así: éxito 133 (73.9%), redirección 37 (20.6%) y requerimiento de segunda punción en 5 (2.8%). En la técnica transversal la efectividad fue 96.7% (n=58), en longitudinal del 100% (n=60) y en oblicua del 95.0% (n=57), (p=0.377). En residentes la efectividad fue 95.6% (n=86) y en especialistas 98.9% (n=89), (p=0.184). La distribución de éxito mostró que en los especialistas fue mayor en un 18.9% que en los residentes (p=0.004), por género los hombres tienen un éxito mayor en un 18.7% que las mujeres (p=0.009, OR=3.12, IC 95%: 1.30, 7.52). Discusión: No se encontró diferencia significativa en el uso de cualquier técnica, pero la tendencia favorece la técnica longitudinal, quien obtuvo mayor porcentaje de efectividad y éxito.