Biological and physical interactions on a tropical island coral reef: Transport and retention processes on moorea, French Polynesia

The Moorea Coral Reef Long Term Ecological Research project funded by the US National Science Foundation includes multidisciplinary studies of physical processes driving ecological dynamics across the fringing reef, back reef, and fore reef habitats of Moorea, French Polynesia. A network of oceanographic moorings and a variety of other approaches have been used to investigate the biological and biogeochemical aspects of water transport and retention processes in this system. There is evidence to support the hypothesis that a low-frequency counterclockwise flow around the island is superimposed on the relatively strong alongshore currents on each side of the island. Despite the rapid flow and flushing of the back reef, waters over the reef display chemical and biological characteristics distinct from those offshore. The patterns include higher nutrient and lower dissolved organic carbon concentrations, distinct microbial community compositions among habitats, and reef assemblages of zooplankton that exhibit migration behavior, suggesting multigenerational residence on the reef. Zooplankton consumption by planktivorous fish on the reef reflects both retention of reef-associated taxa and capture by the reef community of resources originating offshore. Coral recruitment and population genetics of reef fishes point to retention of larvae within the system and high recruitment levels from local adult populations. The combined results suggest that a broad suite of physical and biological processes contribute to high retention of externally derived and locally produced organic materials within this island coral reef system. © 2013 by The Oceanography Society. All rights reserved.

Relación entre la fragmentación del hábitat primario a escala de paisaje y la avifauna dependiente de bosque tropical en la región caribeña de Guatemala

El estudio de los efectos de la modificación del hábitat sobre la diversidad biológica tropical es un tema fundamental para la biología de la conservación. El objetivo principal de este trabajo fue evaluar el efecto de la modificación del bosque tropical a escala de paisaje, y en particular de la fragmentación del bosque, sobre las comunidades de aves en la región caribeña de Guatemala, e identificar los mecanismos ecológicos principales asociados a dichos efectos. Relevé las comunidades de aves en 123 paisajes, y estudié la relación entre: 1) la presencia de 10 especies blanco; 2) la riqueza, abundancia y composición de las aves dependientes de bosque; 3) la dinámica temporal de dicha comunidad; 4) la riqueza de ocho gremios ecológicos, y la variación en la composición y configuración del hábitat en estos paisajes, mediante modelos lineales generalizados y técnicas multivariadas. Concluí que: 1) la persistencia de las aves en paisajes modificados depende de factores que operan a escalas extra-territoriales; 2) el efecto de la cobertura de bosque sobre la comunidad de aves fue mayor, pero hubo fuertes respuestas a la fragmentación y aumentos del perímetro de las especies de interior de bosque, las granívoras, nectarívoras, e insectívoras residentes de follaje y hojarasca; 3) la dinámica comunitaria de los paisajes con cobertura mayor al 40 por ciento, independientemente del grado de fragmentación, fueron muy similares a la del bosque continuo; 4) las especies más vulnerables a la modificación poseen poca capacidad de utilizar hábitats alternativos, impidiendo la suplementación de recursos en éstos y/o restringiendo su dispersión a otros fragmentos; aquellas que se alimentan y anidan en los estratos inferiores del bosque y construyen nidos abiertos son más vulnerables a los efectos bióticos y abióticos de los bordes de bosque; las especies que son miembros comunes de grupos de alimentación son afectadas por mayores requerimientos de área y una menor amplitud de hábitat.

Species diversity structure analysis at two sites in the tropical rain forest of Sumatra

Data from a hilly forest study site at Batang Ule, Sumatra, are organized into 30 100-m × 10-m subplots lying perpendicular to the line of maximal topographic gradient, from the valley to the plateau/ridge. The following methodological question is addressed: what species diversity measures are best used in order to reveal the ecologically distinct regions in the site. The main tool used to answer this question is the α-diversity curve (Hα). Graphical examination of tree and species densities, and α-diversity curves identifies an anomalous species diversity behaviour of the ‘ridge above the slope’ subplots which may have implications on land-facet class definitions. Factor analysis of the α-diversity curves indicates that the diversity space is two-dimensional: i.e. two diversity measures are sufficient to characterize the site; the species density (H0), and the Berger-Parker index (H[infty infinity]). In the two-dimensional diversity-space three distinct species diversity groups are found which relate to the topographic gradient at the Batang Ule site. The results are compared with those for a flat homogeneous site at Pasirmayang, Sumatra. The implications of the results on land-classifications in species-diversity mapping and conservation strategy are discussed.

Analysis of species hyper-diversity in the tropical rain forests of Indonesia: the problem of non-observance

The main interest in the assessment of forest species diversity for conservation purposes is in the rare species. The main problem in the tropical rain forests is that most of the species are rare. Assessment of species diversity in the tropical rain forests is therefore often concerned with estimating that which is not observed in recorded samples. Statistical methodology is therefore required to try to estimate the truncated tail of the species frequency distribution, or to estimate the asymptote of species/diversity-area curves. A Horvitz-Thompson estimator of the number of unobserved (“virtual”) species in each species intensity class is proposed. The approach allows a definition of an extended definition of diversity, ( or generalised Renyi entropy). The paper presents a case study from data collected in Jambi, Sumatra, and the “extended diversity measure” is used on the species data.

Computational modelling of freeze layers in smelting processes

The use of computational modelling in examining process engineering issues is very powerful. It has been used in the development of the HIsmelt process from its concept. It is desirable to further water-cool the HIsmelt vessel to reduce downtime for replacing refractory. Water-cooled elements close to a metal bath run the risk of failure. This generally occurs when a process perturbation causes the freeze and refractory layers to come away from the water-cooled element, which is then exposed to liquid metal. The element fails as they are unable to remove all the heat. Modelling of the water-cooled element involves modelling the heat transfer, fluid flow, stress and solidification for a localised section of the reaction vessel. The complex interaction between the liquid slag and the refractory applied to the outside of thewater-cooled element is also being examined to model the wear of this layer. The model is being constructed in Physica, a CFD code developed at the University of Greenwich. Modelling of this system has commenced with modelling solidification test cases. These test cases have been used to validate the CFD code’s capability to model the solidification in this system. A model to track the penetration of slag into refractory has also been developed and tested.

Characterisation of freeze-dried wafers and solvent evaporated films as potential drug delivery systems to mucosal surfaces

Freeze-dried (lyophilised) wafers and solvent cast films from sodium alginate (ALG) and sodium carboxymethylcellulose (CMC) have been developed as potential drug delivery systems for mucosal surfaces including wounds. The wafers (ALG, CMC) and films (CMC) were prepared by freeze-drying and drying in air (solvent evaporation) respectively, aqueous gels of the polymers containing paracetamol as a model drug. Microscopic architecture was examined using scanning electron microscopy, hydration characteristics with confocal laser scanning microscopy and dynamic vapour sorption. Texture analysis was employed to investigate mechanical characteristics of the wafers during compression. Differential scanning calorimetry was used to investigate polymorphic changes of paracetamol occurring during formulation of the wafers and films. The porous freeze-dried wafers exhibited higher drug loading and water absorption capacity than the corresponding solvent evaporated films. Moisture absorption, ease of hydration and mechanical behaviour were affected by the polymer and drug concentration. Two polymorphs of paracetamol were observed in the wafers and films, due to partial conversion of the original monoclinic to the orthorhombic polymorph during the formulation process. The results showed the potential of employing the freeze-dried wafers and solvent evaporated films in diverse mucosal applications due to their ease of hydration and based on different physical mechanical properties exhibited by both type of formulations.

In vitro drug release studies of polymeric freeze-dried wafers and solvent-cast films using paracetamol as a model soluble drug

Drug dissolution and release characteristics from freeze-dried wafers and solvent-cast films prepared from sodium carboxymethylcellulose (CMC) have been investigated to determine the mechanisms of drug release from the two systems. The formulations were prepared by freeze-drying (wafers) or drying in air (films), the hydrated gel of the polymer containing paracetamol as a model soluble drug. Scanning electron microscopy (SEM) was used to examine differences between the physical structure of the wafers and films. Dissolution studies were performed using an exchange cell and drug release was measured by UV spectroscopy at 242 nm. The effects of drug loading, polymer content and amount of glycerol (films) on the release characteristics of paracetamol were investigated. The release profiles of paracetamol from the wafers and films were also compared. A digital camera was used to observe the times to complete hydration and dissolution of the wafers containing different amounts of CMC and how that impacts on drug release rates. Both formulations showed sustained type drug release that was modelled by the Korsmeyer–Peppas equation. Changes in the concentration of drug and glycerol (films) did not significantly alter the rate of drug release while increasing polymer content significantly decreased the rate of drug release from both formulations. The results show that the rate of paracetamol release was faster from the wafers than the corresponding films due to differences in their physical structures. The wafers which formed a porous network, hydrated faster than the more dense and continuous, (non-porous) sheet-like structure of the films.