Rubber tree early selection for yield stability in time and among locations

Rubber production in the rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell. Arg.] can be expressed differently in different environments. Thus the objective of the present study was to select productive progenies, stable and responsive in time and among locations. Thirty progenies were assessed by early yield tests at three ages and in three locations. A randomized block design was used with three replications and ten plants per plot, in 3 × 3 m spacing. The procedure of the mixed linear Reml/Blup model-restricted maximum likelihood/best non-biased linear prediction was used in the genetic statistical analyses. In all the individual analyses, the values observed for the progeny average heritability (ĥpa 2) were greater than those of the additive effect based on single individuals (ĥa 2) and within plot additive (ĥad 2). In the joint analyses in time, there was genotype × test interaction in the three locations. When 20 % of the best progenies were selected the predicted genetic gains were: Colina GG = 24.63 %, Selvíria GG = 13.63 %, and Votuporanga GG = 25.39 %. Two progenies were among the best in the analyses in the time and between locations. In the joint analysis among locations there was only genotype × location interaction in the first early test. In this test, selecting 20 %, the general predicted genetic gain was GG = 25.10 %. Identifying progenies with high and stable yield over time and among locations contributes to the efficiency of the genetic breeding program. The relative performance of the progenies varies depending of the age of early selection test. © 2013 Springer Science+Business Media Dordrecht.

Microsatellite marker-based assessment of the biodiversity of native bioethanol yeast strains

Although many Brazilian sugar mills initiate the fermentation process by inoculating selected commercial Saccharomyces cerevisiae strains, the unsterile conditions of the industrial sugar cane ethanol fermentation process permit the constant entry of native yeast strains. Certain of those native strains are better adapted and tend to predominate over the initial strain, which may cause problems during fermentation. In the industrial fermentation process, yeast cells are often exposed to stressful environmental conditions, including prolonged cell recycling, ethanol toxicity and osmotic, oxidative or temperature stress. Little is known about these S. cerevisiae strains, although recent studies have demonstrated that heterogeneous genome architecture is exhibited by some selected well-adapted Brazilian indigenous yeast strains that display high performance in bioethanol fermentation. In this study, 11 microsatellite markers were used to assess the genetic diversity and population structure of the native autochthonous S. cerevisiae strains in various Brazilian sugar mills. The resulting multilocus data were used to build a similarity-based phenetic tree and to perform a Bayesian population structure analysis. The tree revealed the presence of great genetic diversity among the strains, which were arranged according to the place of origin and the collection year. The population structure analysis revealed genotypic differences among populations; in certain populations, these genotypic differences are combined to yield notably genotypically diverse individuals. The high yeast diversity observed among native S. cerevisiae strains provides new insights on the use of autochthonous high-fitness strains with industrial characteristics as starter cultures at bioethanol plants. © 2013 John Wiley & Sons, Ltd.

User-producer interaction in the Brazilian oil industry: The relationship between petrobras and its suppliers of wet Christmas tree

The objective of this work is to analyze the importance of the user-producer interaction for the innovative process of the Brazilian oil industry from the 2000s. To do so, we selected two of the three providers installed in Brazil that produce the set of valves used in the oil wellhead to control its production, set which is called wet Christmas tree (WCT), the Norway's Aker Solutions and the American FMC Technologies. The results of this analysis indicate not only the development of the oil industry in Brazil is marked by a strategy of cooperative innovation, but they also reveal the importance of geographical proximity and direct cooperation, especially between the centers of engineering and research and development of companies. Furthermore, these partnerships are not limited to the adaptation of products to new needs, but they also include the development of new systems. © Universidad Alberto Hurtado, Facultad de Economía y Negocios.

Leaf anatomical traits are correlated with tree dominance in a Neotropical deciduous forest

Deciduous forests from the neotropics are one of the most endangered forest types in the world due to the exploitation of their natural resources by mankind. Many aspects of these ecosystems have been studied; however, there is a lack of information about leaf structure and the effects of tree dominance on their structural leaf patterns. In this article, we examine leaf anatomy and specific leaf areas (SLA) in 13 tree species differing in their dominance in a Dry Forest site in Central Brazil, relating leaf anatomical traits with phytosociological aspects. Leaf anatomical traits differed according to tree dominance: greater leaf thickness (achieved through greater thickness of the mesophyll), low values of SLA and bigger stomata were found for the most dominant species, whereas the less dominant species showed thinner leaves with high SLA, as well as numerous and small stomata. These responses suggest that tree dominance is an important indirect effect associated with vertical light availability in the forest. These strategies are probably related to the accomplishment of a high performance in carbon gain and water economy, given the distinction in irradiance that the leaves of different species are subject to in the dry forest. © 2013 Copyright The Royal Society of New Zealand.

Prospects for the use of municipal tree pruning wastes in particleboard production

The purpose of this study was to evaluate the physical and mechanical properties of particleboard made with pruning wastes from Ipê (Tabebuia serratifolia) and Chapéu-de-Sol (Terminalia catappa) trees. Particleboards were prepared with both wood species, using all the material produced by grinding the pruning wastes. The particleboards had dimensions of 45×45 cm, a thickness of approximately 11.5 mm and an average density of 664 kg/m3. A urea-formaldehyde adhesive was used in the proportion of 12% of the dry particle mass. The particleboards were pressed at a temperature of 130 C for 10 mins. The physical and mechanical properties analyzed were density, moisture content, thickness swelling, percentage of lignin and cellulose, modulus of resilience, modulus of elasticity and tensile strength parallel to the grain, accordingly to the standards NBR 14810 and CS 236-66 (1968). The particleboards were considered to be of medium density. The particle size significantly affected the static bending strength and tensile strength parallel to the grain. Ipê presented better results, demonstrating a potential for the production and use of particleboard made from this species. © The Author(s) 2013.

Padrões fractais: contribuições ao processo de generalização de conteúdos matemáticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Variabilidade genética de Fusarium spp. isolados de solos e de bananeiras com sintomas do Mal-do-Panamá

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

MHV tree amplitudes in super-Yang-Mills and in superstring theory

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização da fertilidade do solo, vegetação e interação solo-planta em florestas de restinga do litoral paulista

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variabilidade espacial de atributos do solo e sua relação com características agronômicas de genótipos de uvaieira (Eugenia pyriformis, Cambess)

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Caracterização morfológica e molecular de Strongyloides ophidiae (nematoda, strongyloididae) parasitas de serpentes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de marattiales da Floresta Petrificada do Tocantins Setentrional (Permiano, Bacia do Parnaíba)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biochemical polymorphisms and genetic relationships between Brazilian and foreign breeds of pigs reared in Brazil

Foi investigada a variabilidade genética de 14 sistemas protéicos codificados por 15 locos estruturais em amostras de sangue de suínos das raças Piau e Caruncho. Os resultados foram comparados com àqueles obtidos previamente para amostras de Landrace, Large White, Duroc e Mouro. O grau de variabilidade genética obtida para Piau (He=0,114) foi similar àquelas estimadas para outras raças criadas no Brasil (Landrace, He=0,116; Large White, He=0,119; Duroc, 0,095; Mouro, He= 0,130). Caruncho apresentou a menor variabilidade (He= 0,056). A partir das freqüências gênicas dos locos polimórficos, foi calculada a eficiência de cada sistema para testes de paternidade e as probabilidades combinadas de exclusão de paternidade foram estimadas em 58% para Piau e 36% para Caruncho. Análises das distâncias genéticas revelaram que a raça mais próxima da Piau foi a Landrace (D=0,042). Caruncho apresentou as maiores divergências em relação a todas as raças comparadas, que variaram de 0,107 (com Landrace) a 0,176 (com Duroc). A árvore construída através de UPGMA e Distância de Rogers mostrou uma topologia na qual Piau e Mouro se uniram as raças Européias (Landrace e Large White), e Caruncho está separado de todas as demais raças. Os resultados das análises das amostras de Caruncho devem ser interpretados com cautela, uma vez que o número de animais estudados foi pequeno.

Diversidade genética de Xanthomonas citri subsp. citri, caracterização molecular e patogênica de Xanthomonas fuscans subsp. aurantifolii e detecção de Xanthomonas alfalfae em citrumelo ‘Swingle’ (Citrus paradisi Macf. x Poncirus trifoliata L. Raf.) no Brasil

Pós-graduação em Microbiologia Agropecuária - FCAV

Population structure of Lutjanus purpureus (Lutjanidae - Perciformes) on the Brazilian coast: further existence evidence of a single species of red snapper in the western Atlantic

ABSTRACT: The present study focus on the mitochondrial control region to investigate phylogeographic patterns and population structure in Lutjanus purpureus, and to evaluate the genetic similarity between L. purpureus and L. campechanus. For the initial analysis, 810 base pairs sequence from control region were obtained from 239 specimens of L. purpureus collected from four localities off the Brazilian coast. The results revealed the presence of a single panmictic population characterized by high values of genetic diversity. The 299 base pairs hypervariable portion were used for the combined analysis of L. purpureus and L. campechanus, being 275 haplotypes identified in the 414 specimens. Phylogenetic tree and haplotype network did not indicate phylogeographic substructuring between the two species, but rather an intense intermingling of individuals. Considering their marked morphological similarity, the molecular data presented here indicatethat only one species of red snapper exists in the western Atlantic.