Investigation on the ecological impact of constructing and activities of petrochemical industries of petrochemical special economic zone of Mahshahr on the abundance and diversity of macrobenthic fauna in Jafari Creek, north-west of the Persian Gulf

The impact of Petrochemical Special Economic Zone (PETZONE) activities on the health status of Jafari Creek was studied by assessing the changes in macroinvertebrate assemblages in nine sites during September 2006- January 2008. Furthermore to evaluate the ecological status of the Jafari Creek the WFD indices (i.e. AMBI, M-AMBI) were used. The relationship between spatial pattern of macro invertebrate assemblages and ambient factors (i.e. water temperature, salinity, pH, dissolved oxygen, turbidity, electrical conductivity, total dissolved solid, total hardness, total nitrogen, ammonia, total phosphorous, chemical oxygen demand, biological oxygen demand, sediment grain size distribution, sediment organic content, heavy metals contents) was measured. Background Enrichment indices, Contamination factor and Contamination degree, were used to assess the health status in the study area based on Nickel, Lead, Cadmium and Mercury contents of the sediments. The macrobenthic communities had a low diversity and were dominated by opportunistic taxa, and the AMBI and M-AMBI indices need to be calibrated before using in Persian Gulf and its coastal waters. The BIO-ENV analysis identified pH, dissolved oxygen, TDS, and the total organic content of sediments as the major environmental variables influencing the infaunal pattern. This suggests that management should attempt to ensure minimal disturbance to environmental variables underlying the spatial variation in macroinvertebrate assemblages. Background Enrichment indices showed that the health of Jafari Creek has declined over time due to the constant discharge of heavy metals to the Creek system. Furthermore WQS index shows that the quality condition of the water column in Jafari Creek, regard to the calculated number (3) is week. These indices also identified a significant degree of pollution in the study area. The decrease in the ecological potential of Jafari Creek was best highlighted by the alteration in macrobenthic assemblages.

Indigenous traditional technical knowledge of disease cure and prevention through fish consumption

Our knowledge regarding ethno-medico zoology is scanty and scattered. The present work is an endeavour to collect information on indigenous traditional knowledge (ITK) of disease cure through fish consumption, prepare a consolidated report on this aspect and to document our ITK so that in the long run after due verification (by Medical experts), such ITK can be patented. We also suggest for the recognition of the age old tribal medicine and establishment of a national research institute for tribal medicines at suitable place for the welfare of all the human beings.

Traditional bangus culture

The article presents the traditional milkfish culture practices. The different types of culture ponds are classified according to their uses. Pond preparation, stocking density, pond management and harvesting practices are also discussed.

The study and production of fish sauce from Caspian Sea lam fish with traditional fermentation method and microbe and enzyme adding method and identification of important bacteria

Fish sauce is a popular fermented product used in south Asian countries which is made from different small fishes in this research work it was attempted to produce fish sauce from kilka of the Caspian sea, the fish sauce was made from three models of kilka ,such as whole kilka , cooked whole kilka and dressed kilka , each of these models treated it four different fashions of fermentation such as:1- Traditional method, 2- Enzymatic method 3- Microbial method, 4- Mixture of enzyme and microb The results of this investigation showed that time of fermentation for the traditional method was six month, enzymatic method one month, microbial method 3 month and the mixture of enzyme and microb 1 month. The rate of fermentation was least for dressed Kilka, microbial and biochemical changes of Kilka fish sauce were evaluated, total bacterial count was 2.1-6.15 log cfu/ml total volatile nitrogen (TVN) in samples recorded was 250 mg /100g, the amount of protein varied between 10-13 percent, the name of commercial enzymes added was Protamex and Flavourzyme, the bacteria added was L act ob acillus and Pediococous, fish sauce containers fish and 20% salt, temperature of keeping for fermentation was 37 degree c for 6 month.

The Nile perch fishery: traditional and emerging fisheries, overfishing and the use of illegal gears on Lake Albert

The fisheries of Lake Albert have come under increasing focus due to several driving forces that have synergistically evolved resulting into concerns from diverse stakeholders. The driving forces include: the commercialization of the fisheries with entry into the value chain of industrial fish processing, a decline in fish stocks especially of the large-size fishes and the emergency of the light - fishing targeting small pelagic fishes. In addition, the assumption by some opinion leaders that light-fishing (use of light) has destroyed the Nile perch fishery of Lake Albert, other factors such as cross-border fishing conflicts, the emergence of oil, an influx of traders in fish-related activities, and the limited regulatory and enforcement regimes for the diverse commercially exploited fish fauna of Lake Albert all require continuous information and action.

Identification of Materials from Construction Site Images Using Content Based Image Retrieval Techniques

The capability to automatically identify shapes, objects and materials from the image content through direct and indirect methodologies has enabled the development of several civil engineering related applications that assist in the design, construction and maintenance of construction projects. Examples include surface cracks detection, assessment of fire-damaged mortar, fatigue evaluation of asphalt mixes, aggregate shape measurements, velocimentry, vehicles detection, pore size distribution in geotextiles, damage detection and others. This capability is a product of the technological breakthroughs in the area of Image and Video Processing that has allowed for the development of a large number of digital imaging applications in all industries ranging from the well established medical diagnostic tools (magnetic resonance imaging, spectroscopy and nuclear medical imaging) to image searching mechanisms (image matching, content based image retrieval). Content based image retrieval techniques can also assist in the automated recognition of materials in construction site images and thus enable the development of reliable methods for image classification and retrieval. The amount of original imaging information produced yearly in the construction industry during the last decade has experienced a tremendous growth. Digital cameras and image databases are gradually replacing traditional photography while owners demand complete site photograph logs and engineers store thousands of images for each project to use in a number of construction management tasks. However, construction companies tend to store images without following any standardized indexing protocols, thus making the manual searching and retrieval a tedious and time-consuming effort. Alternatively, material and object identification techniques can be used for the development of automated, content based, construction site image retrieval methodology. These methods can utilize automatic material or object based indexing to remove the user from the time-consuming and tedious manual classification process. In this paper, a novel material identification methodology is presented. This method utilizes content based image retrieval concepts to match known material samples with material clusters within the image content. The results demonstrate the suitability of this methodology for construction site image retrieval purposes and reveal the capability of existing image processing technologies to accurately identify a wealth of materials from construction site images.

Comparison of manual and user guided methodologies for the classification and retrieval of construction site images

The amount of original imaging information produced yearly during the last decade has experienced a tremendous growth in all industries due to the technological breakthroughs in digital imaging and electronic storage capabilities. This trend is affecting the construction industry as well, where digital cameras and image databases are gradually replacing traditional photography. Owners demand complete site photograph logs and engineers store thousands of images for each project to use in a number of construction management tasks like monitoring an activity's progress and keeping evidence of the "as built" in case any disputes arise. So far, retrieval methodologies are done manually with the user being responsible for imaging classification according to specific rules that serve a limited number of construction management tasks. New methods that, with the guidance of the user, can automatically classify and retrieve construction site images are being developed and promise to remove the heavy burden of manually indexing images. In this paper, both the existing methods and a novel image retrieval method developed by the authors for the classification and retrieval of construction site images are described and compared. Specifically a number of examples are deployed in order to present their advantages and limitations. The results from this comparison demonstrates that the content based image retrieval method developed by the authors can reduce the overall time spent for the classification and retrieval of construction images while providing the user with the flexibility to retrieve images according different classification schemes.

Product scheduling for thermal energy reduction in papermaking industries

Papermaking is considered as an energy-intensive industry partly due to the fact that the machinery and procedures have been designed at the time when energy was both cheap and plentiful. A typical paper machine manufactures a variety of different products (grades) which impose variable per-unit raw material and energy costs to the mill. It is known that during a grade change operation the products are not market-worthy. Therefore, two different production regimes, i.e. steady state and grade transition can be recognised in papermaking practice. Among the costs associated with paper manufacture, the energy cost is 'more variable' due to (usually) day-to-day variations of the energy prices. Moreover, the production of a grade is often constrained by customer delivery time requirements. Given the above constraints and production modes, the product scheduling technique proposed in this paper aims at optimising the sequence of orders in a single machine so that the cost of production (mainly determined by the energy) is minimised. Simulation results obtained from a commercial board machine in the UK confirm the effectiveness of the proposed method. © 2011 IFAC.

How should governments support the emergence of new industries in leading economies?

Over the past 30 years, developed economies' approaches to supporting growth have focused on competitiveness, entrepreneurship and innovation to varying degrees. However, following the credit crisis and global recession in 2008 there has been demand for an updated narrative of growth based on the emergence of new industries. This paper provides a brief review of the available literature on how governments in leading economies can support new industries to emerge to the benefit of their national economy, discusses a number of issues for governments trying to support emerging industries, provides a framework of activities which governments considering this type of intervention should consider, and discusses the case of the regenerative medicine industry in the UK using the framework. Copyright © 2013 Inderscience Enterprises Ltd.