Effect of Beverages and Mouthwashes on the Hardness of Polymers Used in Intraoral Prostheses

PurposeThe mechanical properties of acrylic resins used in intraoral prostheses may be altered by frequent exposure to liquids such as beverages and mouthwashes. This study aimed to evaluate the effect of thermocycling and liquid immersion on the hardness of four brands of acrylic resins commonly used in removable prostheses (Onda Cryl, QC-20, Classico, Lucitone).Materials and MethodsFor each brand of resin, seven specimens were immersed in each of six solutions (coffee, cola, red wine, Plax-Colgate, Listerine [LI], Oral B), and seven more were placed in artificial saliva (control). The hardness was tested using a microhardness tester before and after 5000 thermocycles and after 1, 3, 24, 48, and 96 hours of immersion. The results were analyzed using three-way repeated-measures ANOVA and Tukey's test (p < 0.05).ResultsThe hardness of the resins decreased following thermocycling and immersion in the solutions. Specimens immersed in cola and wine exhibited significant decreases in hardness after immersion for 96 hours, although the greatest significant decrease in hardness occurred in specimens immersed in LI. However, according to American Dental Association specification 12, the Knoop hardness of acrylic resins for intraoral prostheses should not be below 15. Thus, the median values of superficial hardness observed in most of the acrylic resins in this study are considered clinically acceptable.ConclusionsThe microhardness of polymers used for intraoral prostheses decreases following thermocycling. Among specimens immersed in beverages, those immersed in cola or wine experienced the greatest decrease in microhardness. Immersion of acrylic resins in LI significantly decreased the microhardness in relation to the initial value. Among the resins assessed, QC-20 exhibited the lowest initial hardness.

Levantamento da mastofauna terrestre de médio e grande porte em remanescente de floresta neotropical – Itatinga, SP

The Brazil´s Atlantic coastal forest biome is considered one of the richest and most exuberant biodiversity of the whole planet. Still, other data shows the reality of this Brazilian forest: more than 93% of its original formation has been already devastated, being the human actions the greatest threat to the perpetuation of the balance and diversity of this ecosystem. This destruction affects all the fauna and flora, with even greater impact on medium and large mammals, due to its high demand on the availability of resources, living area and sensitivity to disturbances. However, today it is known the vital importance of these mammals in the preservation and maintenance of biological systems. Thus, the purpose of this study was to survey the species richness of medium and large mammals in a remnant neotropical forest located in Itatinga, SP,Brazil, using the indirect method of recording (traces on sand-plots, marking territorial, faeces, carcasses, scratches on tree trunks and vocalizations) and camera trapping. Data were collected during ten (10) consecutive months in the year 2008, from February to November. Within twenty-five plots of sand installed and monitored during the ten months were found fifteen (15) species of terrestrial mammals of medium and large, five (5) orders and twelve (12) families. Among them, we highlight the presence of threated species like the puma (Puma concolor), the deer (Mazama gouazoubira) and the giant anteaters (Myrmecophaga tridactyla). The chosen method showed up effective in raising terrestrial mammalian species of medium and large neotropical forest area, having a good applicability and advantages over other existing methods. The study area presents a huge diversity of species and, therefore, this work it is recommended to be only the beginning of new researches in the area in order to enrich... (Complete abstract click electronic access below)

Desenvolvimento e caracterização de compósitos de fibras naturais modificadas e híbridos: fibras da coroa do abacaxi/polipropileno e fibras da coroa do abacaxi/fibras de vidro/polipropileno

The concern with the environment preservation has done with that researchers as well as industries invest in the search for materials that come from renewable sources. Natural fibers, because they are ecologically correct and have low cost, have been studied as a possible substitute, even if partial, of synthetic fibers in the development of polymeric composites. In this context, the hybrid composites (natural/synthetic) increase considerably the range of application of natural composites. The auto industry, in its constant quest for good mechanical properties materials which are developed with sustainability, has in composites with hybrid reinforcement a very viable alternative. In the present work, the nature Crown pineapple fibers and nature Crown pineapple fibers treated with alkaline solution were studied in order to evaluate the influence of chemical treatment in its properties. For this techniques were used x-ray diffractometry, Thermogravimetry and Infrared Spectroscopy (FTIR). Composites have been developed using polypropylene, reinforced with pineapple fibers and pineapple fibers hybrids/glass fibres, both with levels of 5 and 10%. These composites were analyzed by Thermogravimetry techniques and tested by traction. The realization of this work indicated that although the chemical treatment did not affect the thermal stability of the fibers, caused an increase in crystallinity index fibers and decreased its hydrophilic. The tests performed on composite indicated that the composites process was suitable because it provided good dispersion of the polymer matrix. The addition of natural fibers from the pineapple's Crown, in a proportion of 10%, provided the greatest increase in modulus of elasticity (27%) when compared to the pure polymer

Mudou o quê?!: fatos e relatos do crescimento econômico brasileiro no século XXI

The objective of this research is a production of a reporting-book broaching different aspects of the brazilian economic growing, more specifically on the last ten years. These visages surround topics so much discussed by the brazilian and international media. As these medias searched answers for the success of the Brazil's Economy in the 21st century, specially with the good results of the GDP in 2010, the reporting-book also was produced in order to explain better the brazilian scene on the crest of the greatest economic crisis of recent years which has led developed countries to its political and economic degradation

The stream fish fauna from the rio Machado basin, Rondônia State, Brazil

The rio Machado (also known as Ji-Paraná) is a tributary of the rio Madeira in the Amazon basin. Currently, the rio Madeira contains the greatest fish species richness of the world, with approximately 1,000 species. The present study presents the fish inventory from streams of the rio Machado basin. In total, 75 stream reaches, 80 meter-length, randomly selected, were sampled in 2011 (August to October) and 2012 (June to July). Overall, 22,875 fish in eight orders, 32 families, 89 genera, and 140 species were collected. Richness estimators indicate that almost 90% of the expected richness was registered. The great majority of specimens (52.2%) was represented by small sized piabas such as Serrapinnus aff. notomelas, Moenkhausia collettii, Serrapinnus microdon, and Hemigrammus melanochrous. Of the total richness, 25 species were restricted to 9°00’ S and 10°00’ S; among them, 14 were exclusive to the lower portion of the basin, which exhibits the larger proportion of native vegetation covering.

Soil erodibility assessment in a pasture and forest remnant using the Indrbitzen device

Brazil has the largest cattle herd in the world with approximately 200 million head. An important feature of the Brazilian cattle industry is that most of its herd is raised on pasture, which constitutes one of the most economical and practical ways to produce and provide food for cattle. However, this production model is mishandled and can lead to soil degradation. Maintaining soil quality is essential for the conservation of natural ecosystems and the areas of production, thus soil quality improves the conditions for biogeochemical cycles. In this context, the objective of this study was to develop a device for testing the Inderbitzen way of assessing soil erodibility in two situations of usage and occupation. Therefore, one area was used as a sample collection occupied by grazing and the other as a forest fragment; both located in the city of Sorocaba in Sao Paulo State, Brazil. Thus, we concluded that the proposed device – the Inderbitzen – proved capable of assessing soil erodibility of the pasture and remnant forest. Accordingly, there was a tendency for a smaller loss of forest soils in the remnant when compared to the degraded pasture. The greatest resistance of the soil erosion in the forest remnant may be associated with the amount of organic matter released by the forest litter in all its diversity, influencing the quality of the structure of aggregates. Keywords: erosion, forest remnant, degraded pasture, Inderbitzen test.

Genotoxic activity and toxicity of Baccharis trimera Less. regarding the bioaccumulation of heavy metals

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do uso e ocupação do solo sobre a qualidade da água: subsídio à gestão dos recursos hídricos à gestão dos recursos hídricos da Bacia Hidrográfica da Serra da Mantiqueira (UGRHI-1)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resultados e significados do programa de aquisição de alimentos (PAA) para os agricultores familiares de Pereira Barreto (SP)

Pós-graduação em Agronomia - FEIS

Higher yield and economic benefits are achieved in the macadamia crop by irrigation and intercropping with coffee

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Exploring the water-energy nexus in Brazil: the electricity use for water supply

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dendrimer nanocarriers for transport modulation across models of the pulmonary epithelium

The purpose of this study was to determine the effect of PEGylation on the interaction of poly(amidoamine) (PAMAM) dendrimer nanocarriers (DNCs) with in vitro and in vivo models of the pulmonary epithelium. Generation-3 PAMAM dendrimers with varying surface densities of PEG 1000 Da were synthesized and characterized. The results revealed that the apical to basolateral transport of DNCs across polarized Calu-3 monolayers increases with an increase in PEG surface density. DNC having the greatest number of PEG groups (n = 25) on their surface traversed at a rate 10-fold greater than its non-PEGylated counterpart, in spite of their larger size. This behavior was attributed to a significant reduction in charge density upon PEGylation. We also observed that PEGylation can be used to modulate cellular internalization. The total uptake of PEG-free DNC into polarized Calu-3 monolayers was 12% (w/w) vs 2% (w/w) for that with 25 PEGs. Polarization is also shown to be of great relevance in studying this in vitro model of the lung epithelium. The rate of absorption of DNCs administered to mice lungs increased dramatically when conjugated with 25 PEG groups, thus supporting the in vitro results. The exposure obtained for the DNC with 25PEG was determined to be very high, with peak plasma concentrations reaching 5 mu gmL(-1) within 3 h. The combined in vitro and in vivo results shown here demonstrate that PEGylation can be potentially used to modulate the internalization and transport of DNCs across the pulmonary epithelium. Modified dendrimers thereby may serve as a valuable platform that can be tailored to target the lung tissue for treating local diseases, or the circulation, using the lung as pathway to the bloodstream, for systemic delivery.

A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP

Objectives. To compare three different designs for measuring the bond strength between Y-TZP ceramic and a composite material, before and after ceramic surface treatment, evaluating the influence of the size of the adhesive interface for each design.Methods. 'Macro'tensile, microtensile, 'macro'shear, microshear, 'macro'push-out, and micropush-out tests were carried out. Two Y-TZP surface treatments were evaluated: silanization (sil) and tribochemical silica coating (30 mu m silica-modified Al2O3 particles + silanization) (TBS). Failure mode analysis of tested samples was also performed. Results. Both the surface treatment and the size of the bonded interface significantly affected the results (p = 0.00). Regardless of the type of surface treatment, the microtensile and microshear tests had higher values than their equivalent "macro" tests. However, the push-out test showed the highest values for the "macro" test. The tensile tests showed the greatest variability in results. The tribochemical silica coating method significantly increased bond strength for all tests.Significance. Different test designs can change the outcome for Y-TZP/cement interfaces, in terms of mean values and reliability (variability). The 'micro'tests expressed higher bond strengths than their equivalent 'macro'tests, with the exception of the push-out test (macro > micro). (C) 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Contribution of different segments of the gastrointestinal tract to digestion in growing Saanen goats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The utility of open-access biodiversity information in representing anurans in the Brazilian Atlantic Forest and Cerrado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)