Leadership clarity and team innovation in health care

The relationships among leadership clarity (i.e., team members' consensual perceptions of clarity of and no conflict over leadership of their teams), team processes, and innovation were examined in health care contexts. The sample comprised 3447 respondents from 98 primary health care teams (PHCTs), 113 community mental health teams (CMHTs), and 72 breast cancer care teams (BCTs). The results revealed that leadership clarity is associated with clear team objectives, high levels of participation, commitment to excellence, and support for innovation. Team processes consistently predicted team innovation across all three samples. Team leadership predicted innovation in the latter two samples, and there was some evidence that team processes partly mediated this relationship. The results imply the need for theory that incorporates clarity and not just style of leadership. For health care teams in particular, and teams in general, the results suggest a need to ensure leadership is clear in teams when innovation is a desirable team performance outcome. © 2003 Elsevier Inc. All rights reserved.

Managing people to promote innovation

There is growing evidence available to suggest that Human Resource Management (HRM) practice is an important predictor of organizational performance. Drawing upon organizational learning perspectives, we argue that HRM systems also have the potential to promote organizational innovation. We present longitudinal data from thirty-five UK manufacturing organizations to suggest that effective HRM systems – incorporating sophisticated approaches to recruitment and selection, induction, appraisal and training – predict organizational innovation in products and production technology. We further show that organizational innovation is enhanced where there is a supportive learning climate, and inhibited (for innovation in production processes) where there is a link between appraisal and remuneration.

People, technology, processes and risk knowledge sharing

The present global economic crisis creates doubts about the good use of accumulated experience and knowledge in managing risk in financial services. Typically, risk management practice does not use knowledge management (KM) to improve and to develop new answers to the threats. A key reason is that it is not clear how to break down the “organizational silos” view of risk management (RM) that is commonly taken. As a result, there has been relatively little work on finding the relationships between RM and KM. We have been doing research for the last couple of years on the identification of relationships between these two disciplines. At ECKM 2007 we presented a general review of the literature(s) and some hypotheses for starting research on KM and its relationship to the perceived value of enterprise risk management. This article presents findings based on our preliminary analyses, concentrating on those factors affecting the perceived quality of risk knowledge sharing. These come from a questionnaire survey of RM employees in organisations in the financial services sector, which yielded 121 responses. We have included five explanatory variables for the perceived quality of risk knowledge sharing. These comprised two variables relating to people (organizational capacity for work coordination and perceived quality of communication among groups), one relating to process (perceived quality of risk control) and two related to technology (web channel functionality and RM information system functionality). Our findings so far are that four of these five variables have a significant positive association with the perceived quality of risk knowledge sharing: contrary to expectations, web channel functionality did not have a significant association. Indeed, in some of our exploratory regression studies its coefficient (although not significant) was negative. In stepwise regression, the variable organizational capacity for work coordination accounted for by far the largest part of the variation in the dependent variable perceived quality of risk knowledge sharing. The “people” variables thus appear to have the greatest influence on the perceived quality of risk knowledge sharing, even in a sector that relies heavily on technology and on quantitative approaches to decision making. We have also found similar results with the dependent variable perceived value of Enterprise Risk Management (ERM) implementation.

Biomass fuelled combined heat and power:situation in the UK and the Netherlands

Combined Heat and Power (CHP) is the simultaneous generation of usable heat and power in a single process. Despite its obvious advantages in terms of increased efficiency when compared to a single heat or power generation unit, there are a number of technical and economic reasons that have limited their selection. Biomass resources can be, and actually are used as fuel in CHP installations; however several hurdles have to be sorted beforehand, among the most important is the fact that biomass energy sources are not as energy intense as conventional CHP fuels. The ultimate outcome is a limited number of CHP units making use of biomass as fuel. Even fewer CHP units use bioliquids (e.g.: fast pyrolysis biomass liquids, biodiesel and vegetable oil). The Bioliquid-CHP project is carried out by a consortium of seven European and Russian complementary partners, funded by the EU and by the Federal Agency for Science and Innovation of the Russian Federation. The project aim is to develop microturbine and internal combustion engine adaptations in order to adjust these prime movers to bioliquids for CHP applications. This paper will show a summary of the current biomass CHP installations in the UK and the Netherlands, making reference to number of units, capacity, fuel used, the conversion technology involved and the preferred prime movers. The information will give an insight of the current market, with probable future trends and areas where growth could be expected. A similar paper describing the biomass CHP situation in Italy and Russia will be prepared in the near future.

Valuing transferred machine tool technology:Relating value to product attributes and preferences of acquirers

The value of technology and the appropriate form of transfer arrangement are important questions to be resolved when transferring technology between Western manufacturing firms and partners in industrialising and developing countries. This article reports on surveys carried out in the machine tool industries in the UK and China to establish the differences and similarities between owners and acquirers of technology regarding the relative importance of the factors they evaluate, and the assessments they make, when considering a technology transfer. It also outlines the development of a framework for technology valuation. The survey results indicate that the value of product technology is related to superior technical performance, especially on reliability and functionality, and the prospects of premium prices and increased sales of the technology transfer based machine tools. Access to markets is the main objective of UK companies, while Chinese companies are concerned about improving their technological capability. There are significant risks, especially related to performance in the market, and while owners and acquirers have benefited in the short term, the long term collaboration required for strategic benefits has been difficult to achieve because of the different priorities of the owners and the acquirers.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Technology transfer and Chinese government policy:opportunities and implications for business

State-owned enterprises in China have been given greater autonomy and responsibility, have freer access to foreign technology, and are being encouraged to form groups to gain from rationalization and integration. This article uses case studies to identify the key strategic issues that affect the commercial viability of foreign technology acquisition by state-owned enterprises within the context of enterprise reforms. All the case study enterprises used technology transfer to develop new or improved products. Technologies acquired as parts of subcontracting arrangements and well-established technologies to produce end-use products are easier to manage and operate profitably. However, the latter type of technology has been imported by numerous enterprises and has led to fierce competition and industy restructuring. Importing capital-intensive and complex technology to produce major components for products, such as cars, is more difficult and requires closer coordination with customers and suppliers.

Strategic innovation networks

This thesis draws on two key areas of the innovation literature, the strategic management of technology (SMOT) and innovation networks. The aim is to integrate these two areas of the management of innovation literature to develop a framework which I describe as the Strategic Innovation Network (SIN). The key proposition that the revised framework (SIN) aims to address is based on the work of Chandler (1962). Chandler's (1962) conclusion that 'structure follows strategy' is examined in relation to the interaction between corporate/technology strategy and network structure. The SIN is intended to address weaknesses in both the SMOT and network literature. The research data is based on five detailed longitudinal case studies. The organisations are defined as mid-corporate firms operating in traditional manufacturing sectors. Each organisation was chosen on the basis that it was aiming to develop its innovative capacity through product or process innovation projects. The research was carried out over an 18 month period with interviews being held regularly to develop the longitudinal aspect of the study analysis. The data for each individual case study is examined using the SIN framework. The longitudinal approach addresses the objective to provide a dynamic model of the innovation processes by mapping the changes in network structure during the course of individual projects. The network structural changes are examined in relation to each organisation's strategy and five key dynamic network stages are identified in relation to the innovation process. These network stages show the influence strategy has on the structures adopted by the five case studies.

The antecedents and consequences of e-business adoption in Malaysian manufacturing firms

Theory suggests that firms that adopt innovation share some common characteristics, just as those who do not adopt innovation and firms adopt a particular technology because the functions provided by the chosen technology fulfils their needs. Building on these arguments, this research project investigates the antecedents and consequences of e-business adoption among manufacturing firms in Malaysia. This thesis develops from the existing literature of organisational innovation adoption, information technology and strategic marketing/management. It further adds to the existing literature by using cultural-based predictors representing organisational characteristics consisting of market orientation, innovativeness and organisational learning. The study also formalises the theoretical framework of organisational-environment-technology. This study develops a new construct called technology motivation in addition to the introduction of several e-business technology scales. The results substantiate the significance of firm technology motivation in determining firm adoption of the various e-business initiatives. In addition, business environment and market orientation are found to influence firm choice of technology motivation. Meanwhile, innovativeness and organisational learning are shown to influence the magnitude of a firm’s e-business adoption. Finally, the results show that firm adoption of e-business technology does not influence organisational performance. This investigation clarifies the rationale and importance of firm technology motivation in adopting the various e-business initiatives. It also highlights the importance of having the appropriate organisational culture in ensuring a successful technology adoption.

An Investigation into the adoption and implementation of computer aided production management systems:using the Rogers model of adoption and implementation and a social constuctionist account of technology

The research investigates the processes of adoption and implementation, by organisations, of computer aided production management systems (CAPM). It is organised around two different theoretical perspectives. The first part is informed by the Rogers model of the diffusion, adoption and implementation of innovations, and the second part by a social constructionist approach to technology. Rogers' work is critically evaluated and a model of adoption and implementation is distilled from it and applied to a set of empirical case studies. In the light of the case study data, strengths and weaknesses of the model are identified. It is argued that the model is too rational and linear to provide an adequate explanation of adoption processes. It is useful for understanding processes of implementation but requires further development. The model is not able to adequately encompass complex computer based technologies. However, the idea of 'reinvention' is identified as Roger's key concept but it needs to be conceptually extended. Both Roger's model and definition of CAPM found in the literature from production engineering tend to treat CAPM in objectivist terms. The problems with this view are addressed through a review of the literature on the sociology of technology, and it is argued that a social constructionist approach offers a more useful framework for understanding CAPM, its nature, adoption, implementation, and use. CAPM it is argued, must be understood on terms of the ways in which it is constituted in discourse, as part of a 'struggle for meaning' on the part of academics, professional engineers, suppliers, and users.

University-industry-relations - their role in technological innovation:the case of biotechnology in the UK

Biotechnology is one of a series of new `generic technologies' that have been identified by western governments as possessing stategic economic opportunities. In this thesis I examine the characteristics of the technology and the government policies that have been developed to both promote and exploit the underpinning scientific research for biotechnology. The approach I have taken involves an in-depth analysis of the role of university-industry research relations in the development of biotechnology. To this end I carried out a detailed survey of biotechnology companies in the UK on the nature of their interactions and objectives. Through individual case studies of the SERC and DTI club mechanisms in biotechnology, I provide a contemporary appraisal of the development of new mechanisms involving co-ordination and cooperation between industry, government and academia, established to couple state funded science and national economic development. The public policy implications of the club funding systems for science in the UK are examined.

Buyer-supplier relationships in advanced manufacturing technology acquisition and implementation : a study in Malaysia

This thesis reports the results of research into the connections between transaction attributes and buyer-supplier relationships (BSR) in advanced manufacturing technology (AMT) acquisitions and implementation. It also examines the impact of the different patterns of BSR on performance. Specifically, it addresses the issues of how the three transaction attributes; namely level of complexity, level of asset specificity, and level of uncertainty, can affect the relationships between the technology buyer and suppler in AMT acquisition and implementation, and then to see the impact of different patterns of BSR on the two aspect of performance; namely technology and implementation performance. In understanding the pohenomena, the study mainly draws on and integrates the literature of transaction cost economics theory,buyer-supplier relationships and advanced manufacturing technology as a basis of theoretical framework and hypotheses development.data were gathered through a questionnaire survey with 147 responses and seven semi-structured interviews of manufacturing firms in Malaysia. Quantitative data were analysed mainly using the AMOS (Analysis of Moment Structure) package for structural equation modeling and SPSS (Statistical Package for Social Science) for analysis of variance (ANOVA). Data from interview sessions were used to develop a case study with the intention of providing a richer and deeper understanding on the subject under investigation and to offer triangulation in the research process. he results of the questionnaire survey indicate that the higher the level of technological specificity and uncertainty, the more firms are likely to engage in a closer relationship with technology suppliers.However, the complexity of the technology being implemented is associated with BSR only because it is associated with the level of uncertainty that has direct impact upon BSR.The analysis also provides strong support for the premise that developing strong BSR could lead to an improved performance. However, with high levels of transaction attribute, implementation performance suffers more when firms have weak relationships with technology suppliers than with moderate and low levels of transaction attributes. The implications of the study are offered for both the academic and practitioner audience. The thesis closes with reports on its limitations and suggestions for further research that would address some of these limitations.

Acquisition and management of technology in Malaysian companies

This thesis is about the acquisition and diffusion of imported technology. Writers in the field of technology development in developing countries have always recognised that technical progress depends on the diffusion of imported technology and its applications to the provision of products and processes (Rosemberg, 1982). Despite the massive importation of technology by Malaysian companies, little effort has been made to study and understand the diffusion system in local companies. This study analyses: The problems associated with the acquisition of technology, highlighting the technology strategies adopted by the suppliers of technology; the diffusion pattern and key characteristics of the diffusion process; and major factors affecting the diffusion of technology. The policy implications are examined and the framework to manage the diffusion process within the enterprises is suggested. The findings indicated that the diffusion process is not one of passive acceptance but involves systematic efforts to acquire and diffuse the imported technology. A strong system of diffusion in companies had enabled a rapid diffusion of imported technology resulting in higher levels of technical capability. On the other hand, weakness in the company's diffusion system led to limited diffusion and slow technical progress. Characteristics of diffusion system are analysed and discussed extensively. The thesis attempts to develop the idea of `in-house system of diffusion' associated with the acquisition and development of imported technology. It argues for the development ofa stronger theoretical framework on the diffusion and development of technology particularly in countries like Malaysia which relies extensively on the importation of foreign technology.

Trade union policy and new technology: the Civil and Public Services Association

The introduction of a micro-electronic based technology to the workplace has had a far reaching and widespread effect on the numbers and content of jobs. The importance of the implications of new technology were recognised by the trade unions, leading to a plethora of advice and literature in the late 70s and early 80s, notably the TUC 'Technology and Employment ' report. However, studies into the union response have consistently found an overall lack of influence by unions in the introduction of technology. Whilst the advent of new technology has coincided with an industrial relations climate of unprecedented hostility to union activity in the post-war period, there are structural weaknesses in unions in coming to terms with the process of technological change. In particular was the identification of a lack of suitable technological expertise. Addressing itself to this perceived weakness of the union response, this thesis is the outcome of a collaborative project between a national union and an academic institution. The thesis is based on detailed case studies concerning technology bargaining in the Civil Service and the response of the Civil and Public Services Associations (CPSA), the union that represents lower grade white collar civil servants. It is demonstrated that the application of expertise to union negotiators is insufficient on its own to extend union influence and that for unions to effectively come to terms with technology and influence its development requires a re-assessment across all spheres of union activity. It is suggested that this has repercussions for not only the internal organisation and quality of union policy formation and the extent, form and nature of collective bargaining with employer representatives, but also in the relationship with consumer and interest groups outside the traditional collective bargaining forum. Three policy options are developed in the thesis with the 'adversarial' and 'co~operative' options representing the more traditional reactive and passive forms of involvement. These are contrasted with an 'independent participative' form of involvement which was a 'pro-active' policy option and utilised the expertise of the Author in the CPSA's response to technological change.

Technical change and work organisation

This thesis is an exploration of the social and political processes involved in the introduction of new technology to the shopfloor. Through a series of case studies of applications of microelectronics to batch manufacture, it attempts to uncover the ways in which the values and interests of managers, engineers, workers and others profoundly influence the choice and use of technology, and thus the work organisation which emerges. Previous analyses have tended to treat new technology as if it had "impacts" on work organisation - especially skills - which are inevitable in particular technical and economic circumstances. It is in opposition to this view that technical change is here treated as a matter for social choice and political negotiation, the various interested parties to the change being shown to attempt to incorporate their own interests into the technical and social organisation of work. Section one provides the relevant background to the case studies by summarising and criticising previous theoretical and empirical work in the area. The inadequacies of this work for our concerns are drawn out, and the need for detailed studies of the political aspects of technical change is justified. The case studies are presented in section two as a set of "episodes" of innovation, and section three analyses the empirical findings. The innovations are compared and contrasted in order to illustrate the social and political dynamics involved in the various stages of the innovation process. Finally some comments are made on policy issues for which the research has important implications.