Otimização do fresamento de roscas internas com a técnica de interpolação helicoidal

In machining of internal threads, dedicated tools, known as taps, are needed for each profile type, diameter, and low cutting speed values are used when compared to main machining processes. This restriction in the cutting speed is associated with the difficulty of synchronizing the tool s rotation speed and feed velocity in the process. This fact restricts the flexibility and makes machining lead times longer when manufacturing of components with threads is required. An alternative to the constraints imposed by the tap is the thread milling with helical interpolation technique. The technique is the fusion of two movements: rotation and helical interpolation. The tools may have different configurations: a single edge or multiple edges (axial, radial or both). However, thread milling with helical interpolation technique is relatively new and there are limited studies on the subject, a fact which promotes challenges to its wide application in the manufacturing shop floor. The objective of this research is determine the performance of different types of tools in the thread milling with helical interpolation technique using hardened steel workpieces. In this sense, four tool configurations were used for threading milling in AISI 4340 quenched and tempered steel (40 HRC). The results showed that climb cut promoted a greater number of machined threads, regardless of tool configuration. The upcut milling causes chippings in cutting edge, while the climb cutting promotes abrasive wear. Another important point is that increase in hole diameter by tool diameter ratio increases tool lifetime

Constribuição técnica de um sistema de emulsão inversa a base de óleos vegetais para fluidos de perfuração

The developments in formulating drilling fluids to apply in petroleum fields are based on new technologies and environmental challenges, where the technical performance of a developed drilling fluid is used to produce a minimum environmental impact, showing great economy in costs. It is well known that the potential use of oil-based drilling fluids is limited because these fluids when discharged in the sea do not disperse as much as water-based ones and may form waterproof films in the seabed, having a profound effect on plants and animals living in this environment. The current works have been made in investigating fluids called pseudofluids, which are synthetic ester-based, n-paraffin-based and other fluids formed from inverse emulsion. In this research the principal parameters involved in inverse emulsion process were studied, in laboratory scale, using esters as main component. Others commercial drilling fluids were used as comparative samples, as well as samples from laboratory and field where these drilling fluids are being applied. Concentrations of emulsifier and organophilic clay, which are viscosity donor, were varied to verify the influence of these parameters, in different oil/water ratios (55/45, 60/40, 65/35, 70/30, and 75/25). The salt concentration (NaCl) is an indicative parameter of stability and activity of an esterbased fluid. In this research the salt concentration was varied in 10,000, 20,000, and 50,000 ppm of NaCl. Some rheological properties of the produced fluids were studied, such as: initial gel, plastic viscosity, yield point, and apparent viscosity. Through the obtained rheological measures, the existence of two systems could be verified: fluid and flocculated. It could be noticed that the systems were influenced, directly, by the oil/water ratio and emulsifier, organophilic clay and NaCl concentrations. This study showed the viability to use an ester obtained from a regional vegetable product babaçu coconut oil to obtain an efficient and environmental safe drilling fluid

Análise técnica e econômica do processo de obtenção de espaguetes com adição de farinha de trigo integral e farinha de linhaça

This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional

Avaliação técnica e econômica da colheita de florestas de eucalipto com harvester

The acquisition of machinery used in timber harvesting depends on high financial investment, which implies the need for assessments that allow defining more precisely, what is the machine or the whole more recommended for streamlining the operation. This study aimed to technically and economically evaluating the performance of a harvester in Eucalyptus forest harvest first cut. The technique analysis included a time and movements, productivity, efficiency operational and mechanical availability. The economic analysis included the parameters operational cost, harvesting cost and energy consumption. The results obtained from the technological-economic parameters evidenced that of Diameter at Breast Height directly influenced the productivity of harvester. Consequently the lower costs of forest harvest were obtained for the compartments with wider diameter trees.

Viabilidade técnica de uma rota não convencional para a produção de leite de cabra em pó em cooperativas do Rio Grande do Norte

Nowadays, Brazil has both the greatest goat herd and the greatest goat milk production of South America. The state of Rio Grande do Norte, located in northeast of Brazil, has an average year production of three thousand cubic meters of goat milk in natura. Part of this milk production is homemade and it comes from small farms, which unite in rural cooperatives created to encourage the production and implementation of industrial processes for preservation and processing of milk. Results presented by literature and obtained from preliminary essays in this thesis show that non conventional dryer of spouted bed with inert particles is able to produce powder milk from in natura milk (cattle or goat), with the same quality of spray dryer, however, operating at low cost. The method of drying in spouted bed consists of injecting milk emulsion on the bed of inert particles gushed by hot air. This emulsion covers the particles with a thin film, which dries and is reduced to powder during the circulation of inerts inside the bed. The powder is dragged by exhaustion air and separated in the cyclone. The friction among particles resulted from the particles circulation, encourages high taxes of shear in the thin film of emulsion, breaking the cohesive forces and making this process possible. Studying the drying process and the powder goat milk production in one unit of spouted bed with inert particles, seeing the development of a low cost technological route for powder milk production is the aim of this thesis. The powder milk produced by this route must attend the local demand of food industries which need an intermediate product to be used as a food ingredient (ice-cream, milk candy). In order to reach this aim, this thesis approaches the aspects related to physical, thermodynamics and physic-chemicals characteristics of goat milk, whose complete data are still inexistent in the literature. The properties of materials are of great importance to the project of any process which involves the operations of transportation of movement, heat and mass quantity, such as the dryers which operate in fluid dynamically active regime, like the spouted bed. It was obtained new data related to the goat milk properties in function of concentration of solids and temperature. It is also important to mention the study developed about the kinetic of solids retention in the bed of inert particles during the drying of goat milk. It was found more adequate processes conditions to the proposed technological route to be implemented in small and micro-industries, with simplifications in the system of milk injection as well as in the form of operation of the dryer. Important data were obtained for a posterior stage of this research which involves the v modeling, simulation, control and optimization of the process. The results obtained in this thesis, in relation to process performance as well as to the quality of produced powder milk validate the proposal of using the spouted bed dryer in the production of powder goat milk

Avaliação técnica e econômica do corte de eucalipto com feller-buncher em diferentes condições operacionais

This study aimed to technically and economically evaluate the Feller-buncher in different conditions of harvest in eucalypt forests of second cut. The technical analysis included a study of time and movements by the method of continuous time, and operational performance was determined by volume in cubic meters of harvested wood. The economic analysis included the parameters of operational cost, harvest cost and energy consumption. The analysis of the data showed that the composition of main line harvesting and the arrangement of bundles of trees influenced operational performance. The average operational cost was US$ 86.26 per hour of actual work, which resulted in an average cost of forest harvesting of US$ 1.09 m(-3).

Proposta para uma abordagem do conceito de oxirredução no Programa Nacional de Integração da Educação Profissional com a Educação Básica na modalidade de Educação de Jovens e Adultos Educação Profissional Técnica de Nível Médio (PROEJA)

The National Program of Professional Education Integration with Basic Education for Youngsters and Adults (PROEJA) Technical Professional Education Ensino Médio has opened a new chapter in the history of education in Brazil, making possible the integration of basic education and professional education. This new form of education, which is still in its early implementation, presents a series of challenges to be overcome. Specifically about the teaching of Chemistry, didactic material to match PROEJA s specific needs is practically inexistent. Thus, this work has the purpose of developing didactic material for the teaching of Chemistry for Professional and Technological Education of Youngsters and Adults in the courses of Electronics, Technical Electronics and Maintenance and Support for Computing at Instituto Federal de Educação,Ciência e Tecnologia do Rio Grande do Norte. This material aims at working chemical concepts of oxi-reduction reactions through a theme approach following Freire s conceptions for the teaching of Youngsters and Adults

Representações discentes sobre a afetividade nas aulas de inglês de uma escola técnica

This work has risen from the researcher s pedagogical practice at a technical school in Natal, and it aims to observ how affectiveness is noticed by the students in their English classes, since we can have an idea of technicist teaching, which foccus on the acquisition of technical abilities. As cognition and affectiveness are considered indivisible elements in this research, we tried to identify the linguistic signs that express the students representations about affectiveness in their English classes. We used the Systemic Functional Linguistics approach to study the Ideational metafunction of Halliday (1994), by means of the transitivity system, to show how the clauses are used to illustrate these representations, and the interpersonal metafunction, that deals with the relationship between the teacher and the students. We tried to identify the most common processes (HALLIDAY, 1994) mentioned by the 68 students who participated in this work. We used learning narratives (BARCELOS, 2006) submitted to Wordsmith Tools computing program (SCOTT, 2009), whose results indicate the most frequent lexical items found in their narratives. The lexical choices seem to indicate that affectiveness is noticed as a composing element of the English classes in that school. There are representations of interacting classes, where the students needs are considered. These representations are built in the relationship of the students and the teacher, and they are grammatically realized by means of the polarity adjunct no , the intensity adjunct very , and the nominal group the teacher . The relational and mental processes (be) and (like) are the most used in their narratives, and we also observe that affectiveness and disponibility to help the students are considered the most important attitudes in their representations. The Appraisal system is used to analise the choices related to the attitudes and judgement of the students, that show appreciation for interacting classes, but there is still authorithary berhavior from the teacher in the English classes

Monitoramento e avaliação da borracha natural crua utilizando a técnica de análise térmica dinâmico-mecânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da técnica de pressão expiratória positiva oscilante utilizando pressões expiratórias pré-determinadas na viscosidade e na transportabilidade do escarro em pacientes com bronquiectasia

OBJETIVO: Verificar a efetividade da técnica de pressão expiratória positiva oscilante (PEPO) utilizando pressões expiratórias pré-determinadas sobre a viscosidade e a transportabilidade do escarro em pacientes com bronquiectasia. MÉTODOS: Foram incluídos no estudo 15 pacientes estáveis com bronquiectasia (7 homens; média de idade = 53 ± 16 anos), submetidos a duas intervenções PEPO consecutivas, com 24 h de intervalo entre si, utilizando pressões expiratórias de 15 cmH2O (P15) e 25 cmH2O (P25). O protocolo consistiu de tosse voluntária; nova expectoração voluntária após 20 min, denominado tempo zero (T0); repouso de 10 min; e utilização da técnica em duas séries de 10 min (S1 e S2) de PEPO em P15 e P25, com intervalo de 10 min entre si. A viscosidade e transportabilidade do escarro foram avaliadas pela viscosimetria, velocidade relativa de transporte no palato de rã, deslocamento em máquina simuladora de tosse e ângulo de adesão. As amostras de escarro foram coletadas em T0, após S1 e após S2. Testes estatísticos específicos foram aplicados de acordo com a distribuição dos dados. RESULTADOS: Houve diminuição significante da viscosidade do escarro após S1 em P15 e após S2 em P25. Não houve diferenças significantes entre todas as amostras para a transportabilidade. CONCLUSÕES: Houve diminuição da viscosidade do escarro quando a PEPO foi realizada em P15 e P25, o que sugere que não seja necessário gerar alta pressão expiratória para obter o resultado desejado.

Efeito da técnica de oscilação oral de alta freqüência aplicada em diferentes pressões expiratórias sobre a função autonômica do coração e os parâmetros cardiorrespiratórios

O objetivo deste estudo foi avaliar o efeito da técnica de oscilação oral de alta freqüência (com o aparelho Shaker), aplicada em diferentes pressões expiratórias (PE), sobre a função autonômica e parâmetros cardiorrespiratórios. Foram coletados dados de 20 voluntários jovens saudáveis (21,6±1,3 anos), que permaneceram em repouso inicial por 10 minutos e, em seguida, fizeram três séries de dez expirações no aparelho (com intervalo de descanso de 2 minutos entre as séries) em três diferentes PE - pressão livre (PL), de 10 (P10) e de 20 (P20) cmH2O - permanecendo por mais 10 minutos em repouso final. Os dados foram analisados estatisticamente, com nível de significância de 5%. Após a aplicação da técnica, constatou-se diferença significante nos índices de variabilidade da freqüência cardíaca em PL e um aumento significante na pressão arterial sistólica em P20. Na pressão arterial diastólica, freqüência respiratória e saturação periférica de oxigênio não foram encontradas diferenças antes, durante e após a técnica, nas diferentes PE. A percepção do esforço aumentou significantemente ao longo das séries em PL e P20 e entre P10 e P20 em cada série. A freqüência cardíaca (FC) aumentou e diminuiu em sincronia com os movimentos de inspiração e expiração, respectivamente. Foram observadas modificações na modulação autonômica do coração em PL. A aplicação da técnica nessa população, nas diferentes PE analisadas, promoveu modificações no comportamento da FC, no esforço percebido e, em PL, na modulação autonômica do coração.

Pressupostos ontológicos para se pensar a nova tecnologia: técnica, informação e ser e tempo

La recherche presentée, realisée sur le domaine de la méthaphysique, s´agit de rassembler des pressupositions pour une fondamentation ontologique de la technologie de l´Information, basé sur la philophie de Martin Heidegger; foncièrement, sur l´analytique existentiel du Dasein dans l´ouvrage Être et Temps. À partir de la pensée sur ce qui est aujourd´hui , il s´agit d´investiguer sur quels fondaments la Nouvelle Tecnologie se fut érigée de façon a que nous sommes engajés au projet de numérisation des étants que en même temps que destine l´homme a l´oubli de l´Être, l´offre la possibilité de transformation. Le rapport entre la question de l´Être et la question de la technique est analysé comme des chemins croisés et dans ce carrefour il devient possible penser ce qui est technique, ce qui est information pour Heidegger et de quel façon les modes existentiels du Dasein sont prêtes pour caractériser l ´homme au sein de la tecnologie de l´information. Par cette appropriation, il reste penser comment c´est possible l´ouverture d´une perspective de reconduction de l´homme à la vérité de l´Être. Finalement, la structuration des fondements rends possible la réflexion discursive général: avec qui nous nous ocuppons, comme nous sommes, dans quelle direction nous nous acheminons, les thèmes générales, respectivement, des trois chapitres. Les points d´investigation du premier chapitre son: a) La caractérisation précise du Dasein, appuyé sur des considerations de Benedito Nunes, Hans-Georg Gadamer, Jacques Derrida et Rüdiger Safränski; b) Le concept de technique et son essence chez Heidegger; c) la distinction entre technique et technologie, appuyé sur le pensée de J. Ellul, Michel Séris, Otto Pöggeler, Michel Haar, Dominique Janicaud; c) Le concept de cibernetique chez Heidegger et chez Norbert Wiener; d) La caractérisation preliminaire d´information, l´analyse étimologique e philosophique, l´avis de Heidegger te les théories de Rafael Capurro; f) L´Analyse du phénomène de la numérisation des étants, des considérations de Virilio, et l´analyse d´un concept de virtuel avec Henri Bergson et Gilles Deleuze. Dans le deuxième chapitre, l´analyse des existentiels du Dasein vers le sommaire des fondements de base pour la caractérisation de la technologie de l´information comme un problème philosophique. Finalement, aprés avoir presenté les concepts introdutoires que délimitent le questionement, suivi par les indications et pressupositions ontologiques trouvés sur Être et Temps, le troisième chapitre disserte sur le péril, ce qui sauve et la sérénité, les trois mots-clés de la pensée heideggerienne sur la technique que permettent l´approche conclusif de la question

Uma nova tecnologia no pensamento de Herbert Marcuse: arte e técnica na sociedade unidimensional

This dissertation addresses the issue of technology in the work of Herbert Marcuse, explaning the merger between technology and domination that result in a totalitarian technological apparatus. Thus, technological civilization is supported and justified by a rational technological apparatus in the society, we have come not only the philosophy of Marcuse, but other great thinkers too, like Heidegger, Hegel, Marx. We also present a debate involving the philosophy of science, logic and linguage. Marcuse points to the need for a new technological rationality that emerge from a new sensibility, where the technique would allow a new relationship between man and nature. From then on, would emerge the need for a new subject. This transition would be possible by means of sensitivity, where art would become the art of live. With the link between art and technique made possible by new sensitivity, the author leaves one of its main contribution: he leaves open the possibility for the subject to choose new targests for technological development

Uma nova tecnologia no pensamento de Herbert Marcuse: arte e técnica na sociedade unidimensional

This dissertation addresses the issue of technology in the work of Herbert Marcuse, explaning the merger between technology and domination that result in a totalitarian technological apparatus. Thus, technological civilization is supported and justified by a rational technological apparatus in the society, we have come not only the philosophy of Marcuse, but other great thinkers too, like Heidegger, Hegel, Marx. We also present a debate involving the philosophy of science, logic and linguage. Marcuse points to the need for a new technological rationality that emerge from a new sensibility, where the technique would allow a new relationship between man and nature. From then on, would emerge the need for a new subject. This transition would be possible by means of sensitivity, where art would become the art of live. With the link between art and technique made possible by new sensitivity, the author leaves one of its main contribution: he leaves open the possibility for the subject to choose new targests for technological development

Niilismo e técnica: a caminho da ultrapassagem

Pour formuler une discussion sur le nihilisme, l'enquête sur le premier chapitre examine les preuves historiques et philosophiques de montrer que la réflexion sur le nihilisme comme un problème philosophique, suite à l'analyse et la critique du philosophe Friedrich Nietzsche à partir des principaux concepts au sein de son travail: décrépitude, la mort de Dieu, la dévaluation des valeurs, transvaluation des valeurs, volonté de puissance et éternel retour, ils sont quelques-uns des concepts et servir de cadre au point critique de la métaphysique. Le deuxième chapitre est une analyse des idées qui ont émergé de la lecture de Nietzsche qui sont développées entre le philosophe Martin Heidegger et Ernst Jünger. Un dialogue qui limite le nihilisme et ses ramifications pour l'ère de la technique, et finalement vaincre leur pensée ou dépassement.