Utilization of surgical trepan for the obtainment of calvarial autogenous bone graft in maxillary reconstructions

Maxillomandibular reconstructions are traditionally performed by means of autogenous bone grafts collected from intraoral donor areas and extraoral donor areas such as clavicle, iliac bone, rib, and tibia. The calvarial bone has been studied as an alternative donor area, with a low incidence of complications and minimal postoperative morbidity. Complications such as dural lacerations associated with cerebrospinal fluid leakage and extradural and subdural bleeding were minimized due to the use of surgical trepan, allowing the diploic layer delimitation before the osteotomy, preserving the internal calvarial cortical. The purpose of this article is to suggest a new technique for the obtainment of calvarial bone grafts with surgical trepan.

Unusually rapid growth of brown tumour in the mandible after parathyroidectomy associated with the presence of a supernumerary parathyroid gland

The aim of this study is to report the case of a quick growing brown tumour in the jaw after a parathyroidectomy due to the presence of a rare fifth parathyroid gland. The patient had chronic renal disease and the diagnosis was tertiary hyperparathyroidism. Thirty days after the parathyroidectomy, the patient returned with a significant increase in the tumour size. The suspicion of a supernumerary gland was confirmed by parathyroid scintigraphy. The treatment of brown tumour is dependent on the treatment of the hyperparathyroidism. However, curettage should be considered if a large lesion is disturbing mastication. In conclusion, this case should attract the attention of general practitioner dentists, since they may be the first professionals who have contact with the patient with a brown tumour in the jaws. Likewise, this case emphasises the importance of knowing the type of hyperparathyroidism involved to allow for effective treatment planning. © 2011 European Association for Cranio-Maxillo-Facial Surgery.

Analysis of primary stability of dental implants inserted in different substrates using the pullout test and insertion torque

The aim of the study was to evaluate mechanical behavior of implants inserted in three substrates, by measuring the pullout strength and the relative stiffness. 32 implants (Master Porous-Conexao, cylindrical, external hexagon, and surface treatment) were divided into 4 groups (n = 8): pig rib bone, polyurethane Synbone, polyurethane Nacional 40 PCF, and pinus wood. Implants were installed with the exact distance of 5 mm of another implant. The insertion torque (N·cm) was quantified using the digital Kratos torque meter and the pullout test (N) was performed by an axial traction force toward the long axis of the implant (2 min/mm) through mount implant devices attached to a piece adapted to a load cell of 200 Kg of a universal testing machine (Emic DL10000). Data of insertion torque and maximum pullout force were submitted to one-way ANOVA and Bonferroni tests (α = 0.05). Polyurethane Nacional 40 PCF and pinus wood showed the highest values of insertion torque and pullout force, with significant statistical difference (P < 0.05) with other groups. The analysis showed stiffness materials with the highest values for primary stability. © 2013 Nathalia Ferraz Oliscovicz et al.

Performance, survivability and carcass traits of crossbred lambs from five paternal breeds with local hair breed Santa Inês ewes

The present study aimed to evaluate the performance, survivability and carcass traits of crossbred lambs. Data from 299 lambs born to 209 ewes were used. The dams were from a local hair breed (Santa Inês) and five breeds of sires were used: Dorper (DR), Ile de France (IF), Hampshire Down (HD), Texel (TX) and Santa Inês (SI). The lambs were weighed at birth, weaning and slaughter. Fasting body weight, skin thickness, hot and cold carcass weight, carcass yield and carcass length were measured at slaughter. Carcasses were separated into commercial cuts: neck, shoulder, rib, belly, loin and leg. Leg length and circumference were measured. Analyses of variances using MIXED procedure in SAS® were carried out for weights and carcass traits. Factor, discriminant and canonical analysis were carried out. Mortality data of animals from birth until slaughter was analyzed using logistic regression. The HD animals had the highest mortality rate. TX lambs had similar growth rate and survivability compared to DR and IF and had better carcass traits than these genetic groups. Therefore, this breed can be used as paternal breed to crossbreeding with Santa Inês dams. Santa Inês animals did not differ in growth from birth until slaughter compared to crossbred animals, which highlights the potential of this naturalized breed for meat production. Moreover, there is a great variability inside this breed for carcass and growth traits which may undergo great improvement through selection programs. © 2013 Elsevier B.V.

Anatomy of scapes, bracts, and leaves of Paepalanthus sect. Diphyomene (Eriocaulaceae, Poales) and its taxonomic implications

Paepalanthus sect. Diphyomene comprises 18 species with a convoluted taxonomic history. Aiming to correlate anatomical structures with the systematics of this group and its relatives, we studied the anatomy of scapes, reproductive axis bracts, and leaves of 20 Paepalanthus species. Bracts and leaves show differences in epidermal cell thickening; mesophyll width; vascular bundle arrangement; presence or absence of a hypodermis; types of cells in the vascular bundle sheath extensions; margin shape and composition; and presence or absence of aquiferous parenchyma. Scapes differ in contour, rib number, and pith size. Some diagnostic characters found are presence of aquiferous parenchyma and absence of vascular bundle sheath extensions in leaves of P. urbanianus; vascular bundles decreasing in size towards the margin of leaves and bracts, and scapes with a triangular contour in P. flaccidus; scapes with nine ribs in P. acanthophyllus and ten in P. macer. All anatomical features are summarized in tables. These results aid in the identification and characterization of the species of P. sect. Diphyomene. They also support the current section circumscription, reinforcing the relevance of the anatomical characters in order to define natural groups. © 2012 The New York Botanical Garden.

Estimates of genetic parameters for carcass, growth and reproductive traits in Nellore cattle

The objective of this study was to estimate genetic parameters for female mature weight (FMW), age at first calving (AFC), weight gain from birth to 120 days (WG_B_120), from 210 to 365 days (WG_210_365), rib eye area (REA), back fat thickness (BF), rump fat (RF) and body weight at scanning date (BWS) using single and multiple-trait animal models by the REML method from Nellore cattle data. The estimates of heritability ranged from 0.163±0.011 for WG_210_365 to 0.309±0.028 for RF using the single-trait model and from 0.163±0.010 for WG_210_365 to 0.382±0.025 for BWS using the multiple-trait model. The estimates of genetic correlations ranged from -0.35±0.08 between AFC with BF to 0.69±0.04 between WG_B_120 with BWS. Selection for weights gains, REA, and BWS can improve FMW. © 2013 Elsevier B.V.

República Dominicana: orientaciones estratégicas para la competitividad agroempresarial 2011-2030. Fase estratégica 2011-2016. Propuestas para el diálogo agropecuario nacional

XI Encuentro Nacional de Dirigentes del Sector Agropecuario. Puerto Plata, República Dominicana 5 a 7 de agosto de 2010

Aderência aço-concreto: uma análise do comportamento do concreto fabricado com resíduos de borracha

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização de superfícies de vidros expostas a vapores de KNO3

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho e características da carcaça e da carne de bovinos de diferentes grupos genéticos

Pós-graduação em Zootecnia - FCAV

Análise de polimorfismos em genes do eixo somatotrópico em bovinos Nelore selecionados para crescimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho, características de carcaça e da qualidade da carne de bovinos de corte terminados em confinamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise genética de características de crescimento e de carcaça em bovinos Nelore

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Polimorfismos no gene Tfam e características de carcaça em novilhas da raça Nelore

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)