986 resultados para Stereotyping (Printing)
Resumo:
Six different Digital Proofing Systems from three different techniques have been evaluated as totechnique, printing quality, economy and usability. Digital proof from two paper qualities, coatedand uncoated, has been compared with references printed in offset, to see how good they match eachother. Only two Proofing Systems manage to print on reference paper. The other Proofing Systemsuse special paper for digital proof.Measurements and visuell judgement show that the Digital Proofing Systems visualise referencepictures with quite good quality. Proof optimised for coated paper visualise the colours with goodresult. Proof optimised for uncoated paper shows higher quality than the references, which depends onthe surface of the proofing paper. Comparison between reference paper and proofing paper has takenplace as to differences in colour and paper quality.The Digital Proofing Systems are fully automatic, which demand a quite comprised education forcorrect handling. The purchase price and printing costs vary considerably between the ProofingSystems.
Resumo:
A number of publications has been produced for two companies in Dalarna, Utvecklingshuset andSkönhetsbanken.Utvecklingshuset is working, among other things, with stressyndroms and by treating crises. Theirpublications consist of a number of product sheets, a folder and a brochure. They want to use the publicationsfor information to their customers.Skönhetsbanken is a beauty saloon who will have a brochure to mediate the services they can offer.Photos have been taken, existing and for this purpose written texts have been used.The softwares Adobe Photoshop 7.0 and Adobe Indesign 2.0 have been used for all publications andthe work with producing these has been satisfactory.The effect of a good cooperation with the companies has resulted in that they are pleased with thepublications and feel that they have been part of the end of the results.All of the publications have been or will be printed with digital printing methods, which is the reasonfor the choice of the litterature survey.The survey deals with, among other things, how the digital press works, which papers that are suitable,economic aspects and what a graphic designer should have in mind when it comes to graphic productsthat will be printed with digital printing methods.
Resumo:
The connection between fluorescence and color management still is a relatively unexplored area. Thefollowing composition analyses the theory that when printing on fluorescent ink jet paper using ICCprofilesa more yellow print will appear. In theory the ICC-profile compensate for blue light that fluorescefrom the paper with the complementary color, yellow. The human eye apprehands this fluorescentlight as white.When categorizing a number of ink jet qualities some tests to indicate change of color in the final printwere made. Five qualities were chosen for further analyses, each with different white point. TheTC3.5CMYK target was prined on an ink jet printer and measured with different filters for the measurementequipment, GretagMacbeth Spectrolino. U- and UV-filters were used during the testings.From the measurement data ICC-profiles were made to make it possible to watch how the profiles compensatefor the blue change of color that appeared in the data. Although a distinct change of color intoblue were discernible in the measured data there is no evident proof that this cause a final print thatis more yellow. Other conclusions and results are to be read at the end of this composition.
Resumo:
This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate. To guarantee the qualityof the prints it is very important that the work made in the prepress department is optimized. This survey can thereforebe used as a basis for continuous improvement in the processes at Color Print Sweden AB. This work has alsoresulted in a template that Color Print Sweden AB can use to design routine descriptions to ensure that specific worktasks are performed the right way by everyone and all the time.
Resumo:
The following degree project deals with the production of an ICC-profile, this in the form ofproducing ICC-profiles for VTAB Backa. The company previously had their own profile butthey weren’t satisfied, so earlier this year they started using the TU standard profile, but theyalso wanted a complement to this in form of a profile created for solely their printing press.The separation settings used when creating the new profiles were based on information fromTU and their profile. Two basic profiles were created and then edited to obtain a better result.The test printings made with the edited profiles showed that the less adjustments that are made,the better. It was also discovered that the TU standard profile eliminates the highlight toneswhiles the new profiles are somewhat darker. VTAB Backa has at the end of this degree projectdesided to conduct more test printings before making their decision.
Resumo:
This Degree Project is carried through in association with Fototext in Guthenburg. The firmsees benefits using”Soft Proof” technology for both economic and time-saving. The reasonfor ”Soft Proofing” for internal/ external production is to estimate and controll documentswithout using digital or chemical printing output.The different technical solutions to ”Soft Proof”, knowledges and facts aboutColorManagement together with PDF-workflow is going to pattern for a correct succesfull”Soft Proofing” on the monitor.Acrobat 5 in association with Photoshop 6 are effectively used in ”Soft Proofing” technic.The advance and capacity of the graphical softwares which are explained in this reporthelps the users to begin to experiment with ”Soft Proof”. Graphical firms which are interestedto begin working with ”Soft Proof” need to allready have knowledge in ICC-profilingand a practical ColorManaged workflow.
Resumo:
To make your company change from a conventional workflow to an ICC-based workflow you need tomake investments in time and money. On the other hand you get your reward in terms of a stable andquality safe production. To choose this way of adjusting your company to new routines requires accuracyas well as a great deal of commitment. It is not only about having the right equipment. There area lot of factors that affect the quality of production.Our ambition with this report is to bring out the importance of general thinking when it comes toICC-profiling and to discuss on which basis printing profiles should be created. Quality parameters asfor example roughness and whiteness of paper are also discussed. To be able to investigate these mattersin detail we have taken a closer look at two companies, which have chosen to commit themselvesto achive better quality through color management but still feel that they have some problems withtheir workflow.One of the conclusions that are made in this report is that both companies should extend their investmentsin education of employees to become less independent of consultants, but also to increase theinterest in changes within the company. It is also stressed that an ICC-profile only can be efficient if acompany commits itself to accuracy regarding routines, control and calibration.
Resumo:
The digital printing market is changing faster now than before and the ability to adjust to newsituations has become more importat to a printing company. An efficient internal communicationis essential. At Elanders Digitaltryck a decision was made in august 2002 to look over the shiftworking system for the printer operators. In this paper, an investigation of the possibilities tochange the existing system to a better one was made.The project resultet in four different timetabels. The construction was based on theoretical studiesand an analysis of the current situation at the workplace. The analysis showed that a strong resistanseagainst a change of the working hours exists among the workers and that this should beconsidered before a decision is made. An analasys of the printers counters shows that they areused more efficient during shorter shift periods compared to the longer ones. A closeer look at theabcense due to sickness shows that it is relatively high but no connection between abcense andworking hours could be made.Working hours is a sensitive issue and should be treated with care. It is important that the workersare well informed and preferly involved in the development of a new timetable.
Resumo:
Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink. Deposits from image areas contain pigment and talc from the printingink. The dampening water has also been analyzed. The result shows some sort of problem with thehardness regulator for the clean water. The pH-level should be increased a few steps.
Resumo:
The objective of this thesis has been to investigate the approval process for an image. This investigation has been carriedout at four catalog-producing companies and three companies working with repro or printing. The information wasgathered through interviews and surveys and later used for evaluation. The result of the evaluation has shown that allbusinesses are very good at technical aspects but also that the biggest problem they have is with the communication. Theconclusion is that businesses need a clear construction for the image process. This will minimize the communicationproblems and make the process effective.
Resumo:
The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow. Wrong colorspaces andCMYK-profiles was used in big extent, the displays where uncalibrated or incorrectly calibrated, wrong PDF-presetswas used frequently and it also showed that six different suppliers for their printing materials were used. The solutionsthat were relevant for the problems and defects were later on presented as proposals on measures.
Resumo:
Personalized communication is when the marketing message is adapted to each individual by using information from a databaseand utilizing it in the various, different media channels available today. That gives the marketer the possibility to create a campaign that cuts through today’s clutter of marketing messages and gets the recipients attention. PODi is a non-profit organization that was started with the aim of contributing knowledge in the field of digital printingtechnologies. They have created a database of case studies showing companies that have successfully implemented personalizedcommunication in their marketing campaigns. The purpose of the project was therefore to analyze PODi case studies with the main objective of finding out if/how successfully the PODi-cases have been and what made them so successful. To collect the data found in the PODi cases the authors did a content analysis with a sample size of 140 PODi cases from the year 2008 to 2010. The study was carried out by analyzing the cases' measurable ways of success: response rate, conversion rate, visited PURL (personalized URL:s) and ROI (Return On Investment). In order to find out if there were any relationships to be found between the measurable result and what type of industry, campaign objective and media vehicle that was used in the campaign, the authors put up different research uestions to explore that. After clustering and merging the collected data the results were found to be quite spread but shows that the averages of response rates, visited PURL and conversion rates were consistently very high. In the study the authors also collected and summarized what the companies themselves claim to be the reasons for success with their marketing campaigns. The resultshows that the creation of a personalized campaign is complex and dependent on many different variables. It is for instance ofgreat importance to have a well thought-out plan with the campaign and to have good data and insights about the customer in order to perform creative personalization. It is also important to make it easy for the recipient to reply, to use several media vehicles for multiple touch points and to have an attractive and clever design.
Resumo:
This thesis investigates how the optical properties of paperboard influences printing with targets in ISO 12647-2. The targets for optical properties in ISO 12647-2 are defined for paperboard without optical brightening agents and fluorescent brightening agents wich makes it difficult to reach the targets when printing paperboard containing these agents.Seven different types of paperboard, some with and some without the agents, have been printed and instrumentally andvisually measured to see if there is any deviation from the standard targets and if it shows visually.The result shows that paperboard containing optical brightening agents and fluorescent brightening agents can print with targets in ISO 12647-2 but in many measurments the difference between the types of paperboard were to small to assess. The differences between the types of paperboard in the instrumental measurements did not fully correspond with the waythe panel appraised them visually.
Resumo:
På uppdrag av Tidningsutgivarna har en studie utförts angående olika möjligheter att införa tryck av variabeldata med tryckmetoden inkjet i svensk dagspress. Målet var att undersöka tekniska möjligheter och begränsningar samt att utreda om det fanns något intresse på marknaden som skulle kunna ge någon avkastning. Studien utfördes med hjälp av noggranna källstudier och ett fortlöpande samarbete med olika företag med intresse för dagspress. Rapporten beskriver också företag som arbetar med den här typen av innovationer idag och diverse tidigare projekt med variabeltryckta tidningar. Nya teknologier som eventuellt kan vara av intresse för framtida utveckling har också beskrivits och hur tidningens framtid kommer att se ut ur ett kortare och ett längre perspektiv. Studien visar att inkjetpressar inte klarar av den hastighet som de moderna tidningspressarna håller idag. Men i takt med minskade upplagor och utvecklad teknologi, samt ett stort marknadsmässigt intresse så tyder det på att det kommer att finnas möjlighet att tillverka anpassade digitaltryckta tidningsupplagor inom en överskådlig framtid. Inkjet kan fungera som ett bra komplement till offset. Inlinepressar ger möjligheten att införa variabeltryck i stora tidningsupplagor medan separata inkjetpressar passar bra för tryck av mindre lokala upplagor.
Resumo:
A Simple way to improve solar cell efficiency is to enhance the absorption of light and reduce the shading losses. One of the main objectives for the photovoltaic roadmap is the reduction of metalized area on the front side of solar cell by fin lines. Industrial solar cell production uses screen-printing of metal pastes with a limit in line width of 70-80 μm. This paper will show a combination of the technique of laser grooved buried contact (LGBC) and Screen-printing is able to improve in fine lines and higher aspect ratio. Laser grooving is a technique to bury the contact into the surface of silicon wafer. Metallization is normally done with electroless or electrolytic plating method, which a high cost. To decrease the relative cost, more complex manufacturing process was needed, therefore in this project the standard process of buried contact solar cells has been optimized in order to gain a laser grooved buried contact solar cell concept with less processing steps. The laser scribing process is set at the first step on raw mono-crystalline silicon wafer. And then the texturing etch; phosphorus diffusion and SiNx passivation process was needed once. While simultaneously optimizing the laser scribing process did to get better results on screen-printing process with fewer difficulties to fill the laser groove. This project has been done to make the whole production of buried contact solar cell with fewer steps and could present a cost effective opportunity to solar cell industries.