Steady-state crack growth and fracture work based on the theory of mechanism-based strain gradient plasticity

Mode I steady-state crack growth is analyzed under plane strain conditions in small scale yielding. The elastic-plastic solid is characterized by the mechanism-based strain gradient (MSG) plasticity theory [J. Mech. Phys. Solids 47 (1999) 1239, J. Mech. Phys. Solids 48 (2000) 99]. The distributions of the normal separation stress and the effective stress along the plane ahead of the crack tip are computed using a special finite element method based on the steady-state fundamental relations and the MSG flow theory. The results show that during the steady-state crack growth, the normal separation stress on the plane ahead of the crack tip can achieve considerably high value within the MSG strain gradient sensitive zone. The results also show that the crack tip fields are insensitive to the cell size parameter in the MSG theory. Moreover, in the present research, the steady-state fracture toughness is computed by adopting the embedded process zone (EPZ) model. The results display that the steady-state fracture toughness strongly depends on the separation strength parameter of the EPZ model and the length scale parameter in the MSG theory. Furthermore, in order for the results of steady crack growth to be comparable, an approximate relation between the length scale parameters in the MSG theory and in the Fleck-Hutchinson strain gradient plasticity theory is obtained.

Peeling Experiments Of Ductile Thin Films Along Ceramic Substrates - Critical Assessment Of Analytical Models

Two types of peeling experiments are performed in the present research. One is for the Al film/Al2O3 substrate system with an adhesive layer between the film and the substrate. The other one is for the Cu film/Al2O3 substrate system without adhesive layer between the film and the substrate, and the Cu films are electroplated onto the Al2O3 substrates. For the case with adhesive layer, two kinds of adhesives are selected, which are all the mixtures of epoxy and polyimide with mass ratios 1:1.5 and 1:1, respectively. The relationships between energy release rate, the film thickness and the adhesive layer thickness are measured during the steady-state peeling process. The effects of the adhesive layer on the energy release rate are analyzed. Using the experimental results, several analytical criteria for the steady-state peeling based on the bending model and on the two-dimensional finite element analysis model are critically assessed. Through assessment of analytical models, we find that the cohesive zone criterion based on the beam bend model is suitable for a weak interface strength case and it describes a macroscale fracture process zone case, while the two-dimensional finite element model is effective to both the strong interface and weak interface, and it describes a small-scale fracture process zone case. (C) 2007 Elsevier Ltd. All rights reserved.

De los grandes relatos a los estudios de “pequeña escala” : algunas notas acerca de la historiografía del primer peronismo

Resumen: Existen varias posibilidades a la hora de analizar las distintas corrientes en la historiografía reciente del peronismo; sin embargo, en líneas generales, se puede decir que a lo largo de los años el foco del debate se ha trasladado de los sociólogos a los historiadores, de las perspectivas macro a las micro y de lo político a lo social. El énfasis inicial acerca de la supuesta ruptura y anomalía que representaba el peronismo ha prácticamente desaparecido a favor de la continuidad y de su contextualización en el proceso histórico argentino. La imagen homogénea ha sido reemplazada por un cuadro complejo y heterogéneo. Desde la perspectiva de los estudios de género, las investigaciones sobre el peronismo han producido no solamente trabajos sobre el Partido Peronista Femenino, sino otros que también han explorado temas como la reproducción, la maternidad, la infancia y las dinámicas familiares. Asimismo, la dimensión nacional, basada en la experiencia de la Capital Federal y sus alrededores, es decir la óptica metropolitana, ha dado lugar a distintas miradas provinciales, regionales y locales. Con cierta exageración se podría hablar de un desplazamiento de los grandes relatos y los modelos teóricos a los estudios de pequeña escala de la vida cotidiana bajo el peronismo.

Crack growth by grain boundary cavitation in the transient and extensive creep regimes

Crack growth due to cavity growth and coalescence along grain boundaries is analyzed under transient and extensive creep conditions in a compact tension specimen. Account is taken of the finite geometry changes accompanying crack tip blunting. The material is characterized as an elastic-power law creeping solid with an additional contribution to the creep rate arising from a given density of cavitating grain boundary facets. All voids are assumed present from the outset and distributed on a given density of cavitating grain boundary facets. The evolution of the stress fields with crack growth under three load histories is described in some detail for a relatively ductile material. The full-field plane strain finite element calculations show the competing effects of stress relaxation due to constrained creep, diffusion and crack tip blunting. and of stress increase due to the instantaneous elastic response to crack growth. At very high crack growth rates the Hui-Riedel fields dominate the crack tip region. However. the high growth rates are not sustained for any length of time in the compact tension geometry analyzed. The region of dominance of the Hui-Riedel field shrinks rapidly so that the near-tip fields are controlled by the HRR-type field shortly after the onset of crack growth. Crack growth rates under various conditions of loading and spanning the range of times from small scale creep to extensive creep are obtained. We show that there is a strong similarity between crack growth history and the behaviour of the C(t) and C(t) parameters. so that crack growth rates correlate rather well with C(t) and C(t). A relatively brittle material is also considered that has a very different near-tip stress field and crack growth history.

The influence of fluctuation fields on the force-free field .2. The local expansion

In Paper I (Hu, 1982), we discussed the the influence of fluctuation fields on the force-free field for the case of conventional turbulence and demonstrated the general relationships. In the present paper, by using the approach of local expansion, the equation of average force-free field is obtained as (1+b)×B 0=(#x002B;a)B 0#x002B;a (1)×B 0#x002B;K. The average coefficientsa,a (1),b, andK show the influence of the fluctuation fields in small scale on the configurations of magnetic field in large scale. As the average magnetic field is no longer parallel to the average electric current, the average configurations of force-free fields are more general and complex than the usual ones. From the view point of physics, the energy and momentum of the turbulent structures should have influence on the equilibrium of the average fields. Several examples are discussed, and they show the basic features of the fluctuation fields and the influence of fluctuation fields on the average configurations of magnetic fields. The astrophysical environments are often in the turbulent state, the results of the present paper may be applied to the turbulent plasma where the magnetic field is strong.

Aquaculture Asia, Vol.13, No.1, pp.1-56, January-March 2008

Developing guidelines for sustainable freshwater aquaculture planning in Vietnam. Aquaculture production, certification and trade: Challenges and opportunities for the small-scale farmer in Asia. The successful development of backyard hatcheries for crustaceans in Thailand. Alternate carp species for diversification in freshwater aquaculture in India. Genetic and reproduction technologies for enhanced aquaculture and fisheries management of Murray cod. Effluent and disease management in traditional practices of shrimp farming: A case study on the west coast of Sabah, Malaysia. Status of sahar domestication and its development in the Himalayan Region of Nepal. Vaccination benefits highlighted as Schering-Plough reinforces commitment to Asian aquaculture. Comparative advantage analysis of shrimp production in Asia. Strategies to improve livelihood of the rural poor: A case study in two small reservoirs in Binh Phuoc Province, Vietnam. Cambodian Government ban on snakehead farming enforced. Marine finfish aquaculture developments at ‘Indonesian Aquaculture 2007’. Production update – marine finfish aquaculture in the Asia-Pacific region. Body size of rotifers from estuaries in North Sulawesi. NACA Newsletter.

Aquaculture Asia, Vol. 10, No. 4, pp.1-42, October-December 2005

*Table of Contents* Sustainable aquaculture Peter Edwards writes on rural aquaculture: Small-scale pond culture in Bangladesh. People in aquaculture Community based aquaculture - issues and challenges H.K. De and G.S. Saha. Aquaculture as an action programme: An exercise in building confidence and self worth. B. Shanthi, V.S. Chandrasekaran, M. Kailasam, M. Muralidar, T. Ravisankar,.C. Saradad and M. Krishnan The STREAM Column: Transforming policy recommendations into pro-poor service provision Graham Haylor. Research & farming techniques. Grow out of juvenile spotted Babylon to marketable size in earthen ponds II: Polyculture with seabass. S. Kritsanapuntu, N. Chaitanawisuti, W. Santhaweesuk and Y. Natsukari Asia-Pacific Marine Finfish Aquaculture Network. Influence of economic conditions of importing nations and unforeseen global events on grouper markets. Sih Yang Sim. Present status of hatchery technology for cobia in Vietnam. Nhu Van Can. Report on grouper hatchery training course in Indonesia. Nguyen Quoc Thai. Aquatic animal health. Biosecured and improved penaeid shrimp production through organic nursery raceway system in India. Felix. S. and M. Samaya Kannan. Management of monogenean parasites in brackishwater finfish. K.P. Jithendran, M. Natarajan and I.S. Azad. Vembanad Lake: A potential spawner bank of the giant freshwater prawn Macrobrachium rosenbergii on the southwest coast of India. Paramaraj Balamurugan, Pitchaimuthu Mariappan & Chellam Balasundaram.

Aquaculture Asia, Vol. 8, No. 1, pp.1-58, January-March 2003

*Table of Contents* Sustainable Aquaculture Fertilization, soil and water quality management in small-scale ponds part II:Soil and water quality management S. Adhikari Fisheries and aquaculture activities in Nepal Tek Gurung Peter Edwards writes on rural aquaculture: A knowledge-base for rural aquaculture Farmers as Scientists: Commercialization of giant freshwater prawn culture in India M.C. Nandeesha Aquaculture in reservoir fed canal based irrigation systems of India – a boon for fish production K.M. Rajesh, Mridula R. Mendon, K. N. Prabhudeva and P. Arun Padiyar Research and Farming Techniques Production and grow-out of the Black-lip pearl oyster Pinctada margaritifera Idris Lane Breeding of carps using a low-cost, small-scale hatchery in Assam, India: A farmer proven technology S.K. Das Genes and Fish: Hybridisation – more trouble than its worth? Graham Mair Breeding and culture of the sea cucumber Holothuria scabra in Vietnam R. Pitt and N. D. Q. Duy The potential use of palm kernel meal in aquaculture feeds Wing-Keong Ng Using a Simple GIS model to assess development patterns of small-scale rural aquaculture in the wider environment Simon R. Bush Aquaculture fundamentals: Getting the most out of your feed Simon Wilkinson Marine finfish section Status of marine finfish aquaculture in Myanmar U Khin Kolay Regional training course on grouper hatchery production Aquatic Animal Health Advice on aquatic animal health care: Problems in Penaeus monodon culture in low salinity areas Pornlerd Chanratchakool

SAMUDRA Report, No. 48, November 2007

Misconceptions, Outright Prejudice - Fishing rights. The Dilemma of the Nile Perch - Africa: Ecolabelling. Fishing Safely - Analysis: Safety at Sea. Shoring Up - Labour: Shore-based Workers. A Sustainable, Equitable, Small-scale Fisheries - Document: Traditional Communities. Getting Their Act Together - India: Co-management. Certifying the Uncertifiable? - Report: Industrial Aquaculture. Shocking Reality - Cambodia: Electro-fishing. Be Consultative, Participatory - Document: Indigenous Peoples. Towing the Line - Peru: Artisanal Shark Fishery. Declaration of Charter. (56 pp.)

SAMUDRA Report, No. 49, March 2008

Report: Traceability - Tracing the Fish. Uruguay: Fisheries Development - Worn-out Policies. Document: Civil Society Statement - Recognize Rights. Report: ICSF Workshop - Towards a New Commons. Notice: 4SSF Conference - Securing Sustainable Small-scale Fisheries. Malawi: Fisheries Management - Participatory Fisheries Management Revisited. Notice: ICSF Resources - Recent Releases. France: Marine Parks - Reversing from a Dead End. Report: WFFP - Re-energizing for Dignity and Prosperity. Iceland: Human Rights - Common Property or Personal Property? (56 pp.)

ICSF guide book: understanding the Work in Fishing Convention, 2007

This guidebook attempts to provide a quick overview of the Work in Fishing Convention, 2007, which was adopted in Geneva, Switzerland, in June 2007 at the 96th International Labour Conference (ILC) of the International Labour Organization (ILO). It does not purport to provide interpretation of any provisions of the Convention and should not in any way be treated as a substitute for the actual provisions it contains. This guidebook is intended mainly to help those unfamiliar with the Convention and the working of the ILO and the ILC, gain some understanding of the relevant issues. In particular, it is hoped that the guidebook will aid fish workers and their organizations understand the possible benefits and implications of the Convention for artisanal and small-scale fisheries in developing countries.

Marine protected areas and artisanal fisheries in Brazil

Marine protected areas (MPAs) are being promoted around the world as an effective means of protecting marine and coastal resources and biodiversity. However, concerns have been raised about their impact on the livelihoods, culture and survival of small-scale and traditional fishing and coastal communities. Yet, as this study from Brazil shows, it is possible to use MPAs as a tool for livelihood-sensitive conservation. Based on detailed studies of three sites–the Peixe Lagoon National Park in Rio Grande do Sul, and the marine extractive reserves (MERs) of Mandira, São Paulo, and Corumbau, Bahia – the study shows how communities in Brazil have been able to use protected areas to safeguard their livelihoods against development and industrialization projects, like shrimp farms and tourist resorts. (68 pp.)

STREAM country strategy paper: Cambodia

Cambodia is one of the poorest countries in the world; much of its population live in rural areas and many live below the local poverty line. The management of common property aquatic resources is of over-riding importance to food security and sustainable rural development in Cambodia. The key groups of poor people who use aquatic resources as part of their diverse livelihoods portfolios are subsistence fishers, small-scale aquaculture practitioners and aquatic resources collectors. Subsistence fishers access mainly the rivers, lakes and inundated forests in Tonle Sap provinces, the lower Mekong and Bassac regions and the upper part of the Mekong. Small-scale aquaculture and/or the collection of aquatic resources are most important in provinces that are not rich in fisheries resources including Kompong Speu, Ratnakiri, Mondulkiri, Preah Vihear and Ortdar Meanchey. Freshwater capture fisheries probably contribute more to national food security and the national economy in Cambodia than in any other country in the world. (19 p.)

湍流大小尺度涡量方程组及其封闭

利用流体大小尺度（LSS）方程组推导出湍流大小尺度涡量（LSSV）方程组，给出两个关于湍流大小尺度涡量的命题，从而得到湍流封闭大小尺度涡量（CLSSV）方程组。同时，对近程相互作用命题进行了推广。

An Experimental Study on Flame Propagation in Cornstarch Dust Clouds

Following the quantitative determination of dust cloud parameters, this study investigates the flame propagation through cornstarch dust clouds in a vertical duct of 780 mm height and 160 x 160 mm square cross section, and gives particular attention to the effect of small scale turbulence and small turbulence intensity on flame characteristics. Dust suspensions in air were produced using an improved apparatus ensuring more uniform distribution and repeatable dust concentrations in the testing duct. The dispersion-induced turbulence was measured by means of a particle image velocimetry (PIV) system, and dust concentrations were estimated by direct weighing method. This quantitative assessment made it possible to correlate observed flame behaviors with the parameters of the dust cloud. Upward propagating dust flames, from both closed/open bottom end to open/closed top end of the duct, were visualized by direct light and shadow photography. From the observation of propagation regimes and the measurements of flame velocity, a critical value of the turbulence intensity can be specified below which laminar flame propagation would be established. This transition condition was determined to be 10 cm/s. Laminar flames propagated with oscillations from the closed bottom end to the open top end of the testing duct, while the turbulent flames accelerated continuously. Both laminar and turbulent flames propagated with steady velocity from the open bottom end to the closed top end of the duct. The measured propagation velocity of laminar flames appeared to be in the range of 0.45-0.56 m/s, and it was consistent with the measurements reported in the literature. In the present experimental study, the influence of dust concentration on flame propagation was also examined, and the flame propagation velocity was found weakly sensitive to the variations in dust concentration. Some information on the flame structure was revealed from the shadow records, showing the typical heterogeneous feature of the dust combustion process.