Rhetoric and Representation : Exploring the Cultural Meaning of the Natural Sciences in Contemporary Popular Science Writing and Literature

Kirjallisuuden- ja kulttuurintutkimus on viimeisten kolmen vuosikymmenen aikana tullut yhä enenevässä määrin tietoiseksi tieteen ja taiteen suhteen monimutkaisesta luonteesta. Nykyään näiden kahden kulttuurin tutkimus muodostaa oman kenttänsä, jolla niiden suhdetta tarkastellaan ennen kaikkea dynaamisena vuorovaikutuksena, joka heijastaa kulttuurimme kieltä, arvoja ja ideologisia sisältöjä. Toisin kuin aiemmat näkemykset, jotka pitävät tiedettä ja taidetta toisilleen enemmän tai vähemmän vastakkaisina pyrkimyksinä, nykytutkimus lähtee oletuksesta, jonka mukaan ne ovat kulttuurillisesti rakentuneita diskursseja, jotka kohtaavat usein samankaltaisia todellisuuden mallintamiseen liittyviä ongelmia, vaikka niiden käyttämät metodit eroavatkin toisistaan. Väitöskirjani keskittyy yllä mainitun suhteen osa-alueista popularisoidun tietokirjallisuuden (muun muassa Paul Davies, James Gleick ja Richard Dawkins) käyttämän kielen ja luonnontieteistä ideoita ammentavan kaunokirjallisuuden (muun muassa Jeanette Winterson, Tom Stoppard ja Richard Powers) hyödyntämien keinojen tarkasteluun nojautuen yli 30 teoksen kattavaa aineistoa koskevaan tyylin ja teemojen tekstianalyysiin. Populaarin tietokirjallisuuden osalta tarkoituksenani on osoittaa, että sen käyttämä kieli rakentuu huomattavassa määrin sellaisille rakenteille, jotka tarjoavat mahdollisuuden esittää todellisuutta koskevia argumentteja mahdollisimman vakuuttavalla tavalla. Tässä tehtävässä monilla klassisen retoriikan määrittelemillä kuvioilla on tärkeä rooli, koska ne auttavat liittämään sanotun sisällön ja muodon tiukasti toisiinsa: retoristen kuvioiden käyttö ei näin ollen edusta pelkkää tyylikeinoa, vaan se myös usein kiteyttää argumenttien taustalla olevat tieteenfilosofiset olettamukset ja auttaa vakiinnuttamaan argumentoinnin logiikan. Koska monet aikaisemmin ilmestyneistä tutkimuksista ovat keskittyneet pelkästään metaforan rooliin tieteellisissä argumenteissa, tämä väitöskirja pyrkii laajentamaan tutkimuskenttää analysoimalla myös toisenlaisten kuvioiden käyttöä. Osoitan myös, että retoristen kuvioiden käyttö muodostaa yhtymäkohdan tieteellisiä ideoita hyödyntävään kaunokirjallisuuteen. Siinä missä popularisoitu tiede käyttää retoriikkaa vahvistaakseen sekä argumentatiivisia että kaunokirjallisia ominaisuuksiaan, kuvaa tällainen sanataide tiedettä tavoilla, jotka usein heijastelevat tietokirjallisuuden kielellisiä rakenteita. Toisaalta on myös mahdollista nähdä, miten kaunokirjallisuuden keinot heijastuvat popularisoidun tieteen kerrontatapoihin ja kieleen todistaen kahden kulttuurin dynaamisesta vuorovaikutuksesta. Nykyaikaisen populaaritieteen retoristen elementtien ja kaunokirjallisuuden keinojen vertailu näyttää lisäksi, kuinka tiede ja taide osallistuvat keskusteluun kulttuurimme tiettyjen peruskäsitteiden kuten identiteetin, tiedon ja ajan merkityksestä. Tällä tavoin on mahdollista nähdä, että molemmat ovat perustavanlaatuisia osia merkityksenantoprosessissa, jonka kautta niin tieteelliset ideat kuin ihmiselämän suuret kysymyksetkin saavat kulttuurillisesti rakentuneen merkityksensä.

Performance evaluation of a distributed concurrency control algorithm

Concurrency control (CC) algorithms are important in distributed database systems to ensure consistency of the database. A number of such algorithms are available in the literature. The issue of performance evaluation of these algorithms has been recognized to be important. However, only a few studies have been carried out towards this. This paper deals with the performance evaluation of a CC algorithm proposed by Rosenkrantz et al. through a detailed simulation study. In doing so, the algorithm has been modified so that it can, within itself, take care of the redundancy in the database. The influences of various system parameters and the transaction profile on the response time and on the degree of conflict are considered. The entire study has been carried out using the programming language SIMULA on a DEC-1090 system.

Reflecting on Reggio: An evaluation of design intent in an early childhood learning environment

Reggio Emilia is an educational philosophy that encourages teachers, students and their parents to collaborate and actively engage with the environment. This study investigates how the Reggio Emilia design approach was translated architecturally for a kindergarten in an Australian context, and provides insights into the operation of this Reggio kindergarten and the impact that it is now having on the occupants. It evaluates the original architectural design intent of the Reggio Emilia early childhood learning environment against its spatial provision. The relationship that the Reggio Emilia approach facilitates between students and the environment, and the contribution that this approach has on their learning, are also explored. Several key themes emerging from the Reggio values were identified in the literature. These were then used to inform an exploration of the kindergarten spaces and places.. Architects, teachers and a sustainability manager of the kindergarten were interviewed with their experiences constituting the primary data of this study. Using a Grounded Theory methodology, systematic data coding and analysis were then conducted. Themes and concepts that emerged from this process include: differing interpretations of the Reggio Emilia philosophy; motivations for neglect of traditional external structures and play equipment; the impact of education for sustainability; and the positive effects that Reggio Emilia is having on the rest of the institution’s development.

Assessing the sustainability of wheat-based cropping systems using APSIM: Model parameterisation and evaluation

Assessing the sustainability of crop and soil management practices in wheat-based rotations requires a well-tested model with the demonstrated ability to sensibly predict crop productivity and changes in the soil resource. The Agricultural Production Systems Simulator (APSIM) suite of models was parameterised and subsequently used to predict biomass production, yield, crop water and nitrogen (N) use, as well as long-term soil water and organic matter dynamics in wheat/chickpea systems at Tel Hadya, north-western Syria. The model satisfactorily simulated the productivity and water and N use of wheat and chickpea crops grown under different N and/or water supply levels in the 1998-99 and 1999-2000 experimental seasons. Analysis of soil-water dynamics showed that the 2-stage soil evaporation model in APSIM's cascading water-balance module did not sufficiently explain the actual soil drying following crop harvest under conditions where unused water remained in the soil profile. This might have been related to evaporation from soil cracks in the montmorillonitic clay soil, a process not explicitly simulated by APSIM. Soil-water dynamics in wheat-fallow and wheat-chickpea rotations (1987-98) were nevertheless well simulated when the soil water content in 0-0.45 m soil depth was set to 'air dry' at the end of the growing season each year. The model satisfactorily simulated the amounts of NO3-N in the soil, whereas it underestimated the amounts of NH 4-N. Ammonium fixation might be part of the soil mineral-N dynamics at the study site because montmorillonite is the major clay mineral. This process is not simulated by APSIM's nitrogen module. APSIM was capable of predicting long-term trends (1985-98) in soil organic matter in wheat-fallow and wheat-chickpea rotations at Tel Hadya as reported in literature. Overall, results showed that the model is generic and mature enough to be extended to this set of environmental conditions and can therefore be applied to assess the sustainability of wheat-chickpea rotations at Tel Hadya.

A systematic literature review of alcohol education programmes in middle and high school settings (2000-2014)

Purpose Social marketing benchmark criteria were used to understand the extent to which single-substance alcohol education programmes targeting adolescents in middle and high school settings sought to change behaviour, utilised theory, included audience research and applied the market segmentation process. The paper aims to discuss these issues. Design/methodology/approach A systematic literature review retrieved a total of 1,495 identified articles; 565 duplicates were removed. The remaining 930 articles were then screened. Articles detailing formative research or programmes targeting multiple substances, parents, families and/or communities, as well as elementary schools and universities were excluded. A total of 31 articles, encompassing 16 qualifying programmes, were selected for detailed evaluation. Findings The majority of alcohol education programmes were developed on the basis of theory and achieved short- and medium-term behavioural effects. Importantly, most programmes were universal and did not apply the full market segmentation process. Limited audience research in the form of student involvement in programme design was identified. Research limitations/implications This systematic literature review focused on single-substance alcohol education programmes targeted at middle and high school student populations, retrieving studies back to the year 2000. Originality/value The results of this systematic literature review indicate that application of the social marketing benchmark criteria of market segmentation and audience research may represent an avenue for further extending alcohol education programme effectiveness in middle and high school settings.

Does lethal control of top-predators release mesopredators? A re-evaluation of three Australian case studies

Top-predators can sometimes be important for structuring fauna assemblages in terrestrial ecosystems. Through a complex trophic cascade, the lethal control of top-predators has been predicted to elicit positive population responses from mesopredators that may in turn increase predation pressure on prey species of concern. In support of this hypothesis, many relevant research papers, opinion pieces and literature reviews identify three particular case studies as supporting evidence for top-predator control-induced release of mesopredators in Australia. However, many fundamental details essential for supporting this hypothesis are missing from these case studies, which were each designed to investigate alternative aims. Here, we re-evaluate the strength of evidence for top-predator control-induced mesopredator release from these three studies after comprehensive analyses of associated unpublished correlative and experimental data. Circumstantial evidence alluded to mesopredator releases of either the European Red Fox (Vulpes vulpes) or feral Cat (Felis catus) coinciding with Dingo (Canis lupus dingo) control in each case. Importantly, however, substantial limitations in predator population sampling techniques and/or experimental designs preclude strong assertions about the effect of lethal control on mesopredator populations from these studies. In all cases, multiple confounding factors and plausible alternative explanations for observed changes in predator populations exist. In accord with several critical reviews and a growing body of demonstrated experimental evidence on the subject, we conclude that there is an absence of reliable evidence for top-predator control-induced mesopredator release from these three case studies. Well-designed and executed studies are critical for investigating potential top-predator control-induced mesopredator release.

An accurate method for the experimental evaluation of the acoustical impedance of a black box

Among different methods, the transmission-line or the impedance tube method has been most popular for the experimental evaluation of the acoustical impedance of any termination. The current state of method involves extrapolation of the measured data to the reflecting surface or exact locations of the pressure maxima, both of which are known to be rather tricky. The present paper discusses a method which makes use of the positions of the pressure minima and the values of the standing-wave ratio at these points. Lippert's concept of enveloping curves has been extended. The use of Smith or Beranek charts, with their inherent inaccuracy, has been altogether avoided. The existing formulas for the impedance have been corrected. Incidentally, certain other errors in the current literature have also been brought to light.Subject Classification: 85.20.

Evaluation of anti-inflammatory potential of Chloranthus erectus (Buch.-Ham.) Verd. leaf extract in rats

Aim of the study: Chloranthus erectus (Buch.-Ham.) Verdcourt (Chloranthaceae) is a shrub native to tropical and temperate zone of Eastern Himalaya of India and South-East Asia and have traditionally been used as a folklore medicine to treat localised swelling, joint pain, skin inflammation, fever and bodyache. In this study, an attempthas been made to demonstrate the anti-inflammatory activity of methanol extract obtained from Chloranthus erectus leaves (MECEL) in acute, sub-acute and chronic mouse models. Materials and methods: Inflammation in the hind paw of Wistar albino rat was induced by carrageenan, histamine and serotonin, and tissue granuloma pouch was induced by cotton pellet method. Antiinflammatory drug-phenylbutazone was used as standard drug for comparison. Results: In acute carrageenan-induced rat hind paw edema, oral administration of MECEL at 200 mg/kg produced significant inhibition of edema by 38.34 % (p<0.01) while the histamine- and serotonin-induced sub-acute model, the inhibition of paw edema reached 52.54 % (p < 0.001) and 25.5 % (p < 0.01), respectively. in a 7-day study, MECEL at 20 and 50 mg/kg produced significant suppression of cotton pellet-induced tissue granuloma formation in rats. Conclusions: This preliminary study revealed that the methanol extract of Chloranthus erectus exhibited significant anti-inflammatory activity in the tested models, and may provide the scientific rationale for its popular folk medicine as anti-inflammatory agent.

Asking the critical questions: An evaluation of social work students' experiences in an international placement

Preparing social work students for the demands of changing social environments and to promote student mobility and interest in overseas employment opportunities have resulted in an increasing demand for international social work placements. The literature describes numerous examples of social work programmes that offer a wide variety of international placements. However, research about the actual benefit of undertaking an overseas placement is scant with limited empirical evidence on the profile of students participating, their experience of the tasks offered, the supervisory practice and the outcomes for students' professional learning and career. This study contributes to the existing body of literature by exploring the relevance of international field placements for students and is unique in that it draws its sample from students who have graduated so provides a distinctive perspective in which to compare their international placement with their other placement/s as well as evaluating what were the benefits and drawbacks for them in terms of their careers, employment opportunities and current professional practice.

How do Researchers Find and Retrieve Scientific Publications – A Case study of the Impact of the Internet on the Construction IT and Construction Management Research Communities

The World Wide Web provides the opportunity for a radically changed and much more efficient communication process for scientific results. A survey in the closely related domains of construction information technology and construction management was conducted in February 2000, aimed at measuring to what extent these opportunities are already changing the scientific information exchange and how researchers feel about the changes. The paper presents the results based on 236 replies to an extensive Web based questionnaire. 65% of the respondents stated their primary research interest as IT in A/E/C and 20% as construction management and economics. The questions dealt with how researchers find, access and read different sources; how much and what publications they read; how often and to which conferences they travel; how much they publish, and what are the criteria for where they eventually decide to publish. Some of the questions confronted traditional and electronic publishing with one final section dedicated to opinions about electronic publishing. According to the survey researchers already download half of the material that they read digitally from the Web. The most popular method for retrieving an interesting publication is downloading it for free from the author’s or publisher’s website. Researchers are not particularly willing to pay for electronic scientific publications. There is much support for a scenario of electronic journals available totally freely on the Web, where the costs could be covered by for instance professional societies or the publishing university. The shift that the Web is causing seems to be towards the "just in time" reading of literature. Also, frequent users of the Web rely less on scientific publications and tend to read fewer articles. If available with little effort, papers published in traditional journals are preferred; if not, the papers should be on the Web. In these circumstances, the role of paper-based journals published by established publishers is shifting from the core "information exchange" to the building of authors' prestige. The respondents feel they should build up their reputations by publishing in journals and relevant conferences, but then make their work freely available on the Web.

Nondestructive Evaluation in Quality Assurance

An attempt is made to discuss in brief the current philosophy and trends in quality assurance through nondestructive testing. The techniques currently in use and those being developed for newer and advanced materials such as composites are reviewed. 27 ref.--AA

Fabrication and evaluation of 450 F electrochemical redox supercapacitors using inexpensive and high-performance, polyaniline coated, stainless-steel electrodes

Redox supercapacitors using polyaniline (PANI) coated. stainless-steel (SS) electrodes have been assembled and characterized. PANI has been deposited on SS substrate by a potentiodynamic method from an acidic electrolyte which contains aniline monomer. By employing stacks of electrodes, each with a geometrical area of 24 cm(2), in acidic perchlorate electrolyte, a capacitance value of about 450 F has been obtained over a long cycle-life. Characterization studies have been carried out by galvanostatic charge-discharge cycling of the capacitors singly, as well as in series and parallel configurations. Various electrical parameters have been evaluated. Use of the capacitors in parallel with a battery for pulse-power loads. and also working of a toy fan connected to the charged capacitors have been demonstrated. A specific capacitance value of about 1300 F g(-1) of PANI has been obtained at a discharge power of about 0.5 kW kg(-1). This value is several times higher than those reported in the literature for PANI and is, perhaps, the highest value known for a capacitor material. The inexpensive SS substrate and the high-capacitance PANI are favorable factors for commercial exploitation. (C) 2002 Elsevier Science B.V. All rights reserved.

An Objective Evaluation of Displacement-Amplifying Compliant Mechanisms for Sensor Applications

Displacement-amplifying compliant mechanisms (DaCMs) reported in literature are mostly used for actuator applications. This paper considers them for sensor applications that rely on displacement measurement, and evaluates them objectively. The main goal is to increase the sensitivity under constraints imposed by several secondary requirements and practical constraints. A spring-mass-lever model that effectively captures the addition of a DaCM to a sensor is used in comparing eight DaCMs. We observe that they significantly differ in performance criteria such as geometric advantage, stiffness, natural frequency, mode amplification, factor of safety against failure, cross-axis stiffness, etc., but none excel in all. Thus, a combined figure of merit is proposed using which the most suitable DaCM could be selected for a sensor application. A case-study of a micro machined capacitive accelerometer and another case-study of a vision-based force sensor are included to illustrate the general evaluation and selection procedure of DaCMs with specific applications. Some other insights gained with the analysis presented here were the optimum size-scale for a DaCM, the effect on its natural frequency, limits on its stiffness, and working range of the sensor.