Push-pull ethylenes: the structures of 3-(2-imidazolidinylidene)-2,4-pentanedione (I), C8H12N2O2, and 3-(1,3-dimethyl-2-imidazolidinylidene)-2,4-pentanedione trihydrate (II), C10H16N2O2.3H2O

(I): Mr= 168, triclinic, P1, Z=2, a= 5.596 (2), b = 6.938 (3), c = 10.852 (4) A, ~t= 75.64 (3), fl= 93.44 (3), ),= 95.47 (3) °, V= 406.0A 3, Din= 1.35 (by flotation using carbon tetrachloride and n-hexane), D x= 1.374 Mg m -3, g(Mo Kct, 2 = 0.7107 A) = 1.08 cm -l, _F(000) = 180, T= 293 K. (II): Mr= 250, triclinic, P1, Z= 2, a = 7.731(2), b=8.580(2), c=11.033(3)A, a= 97-66 (2), fl= 98.86 (2), y= 101.78 (2) °, V= 697.5 A 3, D m = 1.18 (by flotation using KI solution), Dx= 1.190Mgm -3, g(MoKa, 2=0.7107A)= 1.02 cm -1, F(000) = 272, T= 293 K. Both structures were solved by direct methods and refined to R = 4.4% for 901 reflexions for (I) and 5.7% for 2001 reflexions for (II). The C=C bond distances are 1.451 (3) A in (I) and 1.468 (3)A in (II), quite significantly longer than the C=C bond in ethylene [1.336 (2).~; Bartell, Roth, Hollowell, Kuchitsu & Young (1965). J. Chem. Phys. 42, 2683-2686]. The twist angle about the C=C bond in (II) is 72.9 (5) ° but molecule (I) is essentially planar, the twist angle being only 4.9 (5) ° .

Polarized ethylenes: structures of (1,3-dimethyl-2-imidazolidinylidene)malononitrile and (1,3-dimethyl-2-perhydropyrimidinylidene)malononitrile

Crystal structures of the title compounds, (I) and (II), have been determined by three-dimensional diffraction methods. Crystals of CsHIoN 4 (I) are monoclinic, space group P21/a with Z = 4, Mr= 162, a = 7.965 (1), b = 16.232 (2), c = 7.343 (1) A, fl = 113.54 (1) °, V = 890.7 A 3, D,n = 1.218, D x = 1.208 gcm -3, g(Cu Ka, 2 = 1.5418/~) = 6.47 em -1, F(000) = 344. The crystals of C9H12N4 (II) are orthorhombic, space group P21en, with Z = 4, Mr = 176, a = 7.983 (3), b = 8.075 (2), c = 14.652 (3) ./k, V = 944.43/~3, Dm= 1.219, D x = 1.237 g cm -3, #(Mo Ka, ). = 0.7107 ,/k) = 0.868 cm -1, F(000) = 376. Both structures were solved by direct methods and refined to R = 5.8% for (I) and 5.3 % for (II). The C-C double-bond distances are 1.407 (3) in (I) and 1.429 (6)/~ in (II), appreciably longer than normal. The steric and push-pull effects result in rotation about the C=C bond, the rotation angles being 20.2 (3) in (I) and 31.5 (6) o in (II).

2,1,3-Bentsoksadiatsolirakenteiset molekyylit antibakteerisina ja antiparasiittisina yhdisteinä

Aikaisemman tutkimuksen perusteella tiedettiin tiettyjen 2,1,3-bentsoksadiatsolirakenteisten molekyylien olevan aktiivisia Chlamydia pneumoniae –bakteeria vastaan. Tutkimusta lähdettiin jatkamaan ja 2,1,3-bentsoksadiatsolimolekyylien rakenne-aktiivisuusuhteista haluttiin saada lisätietoa. Tarkoituksena oli kehittää 2,1,3-bentsoksadiatsolimolekyyleille ja sen avulla muodostaa molekyylikirjasto. Syntetisoidut molekyylit haluttiin testata sekä Chlamydia pneumoniae -bakteeria että Leishmania donovani –parasiittia vastaan. Chlamydia pneumoniae –bakteeri aiheuttaa akuutteja ylä- ja alahengitystieinfektiota, kuten keuhkoputkentulehdusta. Akuutissa tulehduksessa oireet vaihtelevat huomattavasti. Chlamydia pneumoniae –bakteerilla on myös taipumus aiheuttaa kroonisia tulehduksia. Nämä ovat useissa tutkimuksissa yhdistetty kansantaloudellisesti merkittäviin sairauksiin, kuten ateroskleroosiin ja astmaan. Leishmanioosi on toiseksi yleisin loissairaus ihmisellä malarian jälkeen. Leishmania donovani –parasiitti voi aiheuttaa tappavaa viskeraalista leishmanioosia. Vuodessa leishmanioosiin kuolee yli 50 000 ihmistä. Viime vuosina leishmanioosin lääkehoidossa on esiintynyt monenlaisia ongelmia. Osat lääkkeistä ovat menettäneet tehonsa ja osalla esiintyy vakavia haittavaikutuksia. 2,1,3-Bentsoksadiatsolirakenteisille yhdisteille saatiin kehitettyä toimiva synteesireitti. Lähtöaineena käytettiin 4-amino-2-nitrobentsoehappoa, josta saatiin hapettavalla renkaansulkeutumisreaktiolla 2,1,3-bentsoksadiatsoli-5-karboksyylihappoa. Karboksyylihaposta syntetisoitiin amidi-välituotteen kautta 2,1,3-bentsoksadiatsoli-5-karbonitriiliä. Hydroksyyliamiini hydrokloridin avulla 2,1,3-bentsoksadiatsoli-5-karbonitriilistä muodostettiin vastaavaa karboksimidamidia, joka oli synteesireitin yhteinen välituote kaikille molekyyleille. Viimeisessä vaiheessa N´-hydroksidi-2,1,3-bentsoksadiatsoli-5-karboksimidamidin annettiin reagoida joko fenyyli-isosyanaatin tai fenyyli-isotiosyanaatin kanssa, jolloin saatiin lopputuotetta. Synteesireitin kehittäminen osoittautui haastavaksi ja loppujen lopuksi saatiin ainoastaan kolme lopputuotetta syntetisoitua. Yksi lopputuotteista testattiin C. pneumoniae –bakteeria vastaan Åbo akademissa Turussa. Testattavaa yhdiste ei sisältänyt 2,1,3-bentsoksadiatsoliarengasta ja bioaktiivisuuskokeen tulos oli odotusten mukainen. Yhdiste ei ollut aktiivinen C. pneumoniae –bakteeria vastaan alhaisilla konsentraatioilla ja tuloksesta voitiin todeta 2,1,3-bentsoksadiatsolirengaan olevan tärkeä aktiivisuuden kannalta. Kaksi lopputuotetta saatiin testaukseen Leishamania donovani –parasiittia vastaan Israeliin. Ainoastaan toinen molekyyleistä sisälsi 2,1,3-bentsoksadiatsolirakenteen. Bioaktiivisuuskokeiden tulokset olivat erittäin rohkaisevia. Yhdisteet olivat aktiivisia parasiittia vastaan jo alhaisilla konsentraatioilla. Kuitenkin 2,1,3-bentsoksadiatsolirakenteinen molekyyli oli aktiivisempi, joten tämäkin aktiivisuuskokeen perusteella huomattiin rengasrakenteen olevan tärkeä aktiivisuuden kannalta.

Optimizing the GaAs capping layer growth of 1.3 mu m InAs/GaAs quantum dots by a combined two-temperature and annealing process at low temperatures

We report on optimizing the GaAs capping layer growth of 1.3 mu m InAs quantum dots (QDs) by a combined two-temperature and annealing process at low temperatures using metalorganic chemical vapor deposition. The initial part (tnm) of the capping layer is deposited at a low temperature of 500 degrees C, which is the same for the growth of both the QDs and a 5-nm-thick In0.15Ga0.85As strain-reducing capping layer on the QDs, while the remaining part is grown at a higher temperature of 560 degrees C after a rapid temperature rise and subsequent annealing period at this temperature. The capping layer is deposited at the low temperatures (<= 560 degrees C) to avoid postgrowth annealing effect that can blueshift the emission wavelength of the QDs. We demonstrate the existence of an optimum t (=5 nm) and a critical annealing time (>= 450s) during the capping, resulting in significantly enhanced photoluminescence from the QDs. This significant enhancement in photoluminescence is attributed to a dramatic reduction of defects due to the optimized capping growth. The technique reported here has important implications for realizing stacked 1.3 mu m InAs/GaAs QD lasers. (C) 2008 Elsevier B.V. All rights reserved.

High-speed and high-power 1.3 mu m InGaAsP/InP selective proton-bombarded buried crescent lasers with optical field attenuation regions

High-speed and high-power InGaAsP/lnP selective proton-bombarded buried crescent (SPB-BC) lasers with optical field attenuation regions were reported. The defect of proton bombardment can not affect the lifetime of the SPB-BC laser because the optical field attenuation region obstructs the growth and propagation of defects. A CW light output over 115 mW was achieved at room temperature using a 500 mu m long cavity SPB-BC laser. The 3 dB bandwidth was 8.5 GHz, and the lifetime was about 8.5 x 10(5) h. The capacitance of four kinds of current blocking structures was first measured in our experiment, and the results shown that the capacitance of proton-bombarded pnpn structure was not only less than that of pnpn current blocking structure, but also less than that of semi-insulating Fe-InP structure.

铁系催化剂聚合1，3-双烯烃的研究

1，2-聚丁二烯和3，4-聚异戊二烯是制造高性能轮胎的原料。本论文研究了以含磷化合物为第三组份的铁催化剂合成1，2-聚丁二烯和3，4-聚异戊二烯的反应规律：1．以二乙基亚磷酸酷为第三组份的铁催化剂可在己烷中，较高温度（50℃）下聚合1，3-丁二烯。通过控制催化剂组份的配比，可制备间同和无规1，2-聚丁二烯。所得间同1，2-聚丁二烯的1，2-结构含量为91％，间规度为90％；所得无规1，2-聚丁二烯的硫化胶具有优异的抗干、湿滑性能。2．以三苯基磷酸酷为第三组份的铁催化剂是合成高间同1，2一聚丁二烯的高效催化剂。所得聚合物具有高的1，2-结构含量（ca.95％），高的间规度（ca.95％）。聚合物的微观结构与催化剂组成等反应因素无关。3．以二烷基亚磷酸醋为第三组份的铁催化剂可在己烷中，较高温度（50℃）下聚合异戊二烯。二烷基亚磷酸醋中烷基影响聚合活性的顺序为乙基一甲基＞正丁基＞异辛基。所得聚异戊二烯的3，4（含1，2）结构含量保持在60％左右，不受反应条件的影响。4．改性甲基铝氧烷（MMAO）活化的铁催化剂聚合异戊二烯，在相当低的MMAO用量下（Al／Fe=20，摩尔比）即有高的催化活性。溶剂影响聚合活性的顺序为甲苯＞环己烷＞己烷＞二氯甲烷。所得聚异戊二烯的3，4（含1，2）结构含量稳定在60％。

Photoluminescence characterization of 1.3 mu m In(Ga)As/GaAs islands grown by molecular beam epitaxy

1.3 mum wavelength In(Ga)As/GaAs nanometer scale islands grown by molecular beam epitaxy (MBE) were characterized by photoluminescence (PL) and atomic force microscopy (AFM) measurements. It is shown that inhomogeneous broadening of optical emission due to fluctuation of the In0.5Ga0.5As islands both in size and in compositions can be effectively suppressed by introducing a AlAs layer and a strain reduction In0.2Ga0.8As layer overgrown on top of the islands, 1.3mum emission wavelength with narrower line-width less than 20meV at room temperature was obtained.

Facile shape-controlled synthesis of luminescent europium benzene-1,3,5-tricarboxylate architectures at room temperature

The large-scale synthesis of the metal-organic framework Eu(1,3,5-BTC)center dot 6H(2)O nanocrystallites with delicate morphologies such as sheaflike, butterflylike, and flowerlike superstructures composed of nanowires have been realized via a simple solution phase method at room temperature. Time-dependent experiments indicate that these superstructures were constructed by the splitting crystal growth mechanism, as has been noted in some minerals in nature. The synthetic parameters such as reaction time, concentration and molar ratio of reactants, surfactant, and reaction temperature all affected the morphology of the Eu(1,3,5-BTC)center dot 6H(2)O architectures. These well-arranged architectures exhibit red emission corresponding to the D-5(0) -> F-7(2) transition of the Eu3+ ions under UV light excitation, and the lifetime is determined to be about 0.22 ms.

Coordination-Induced Formation of One-Dimensional Nanostructures of Europium Benzene-1,3,5-tricarboxylate and Its Solid-State Thermal Transformation

Novel one-dimensional europium benzene-1,3,5-tricarboxylate compressed nanorods have been synthesized oil it large scale through direct precipitation in solution phase under moderate conditions without the assistance of any surfactant, catalyst, or template. The obtained nanorods have widths of about 50-100 not, thicknesses of 10-20 nm, and lengths ranging from a few hundred nanometers to several micrometers. X-ray powder diffraction. elemental analysis, Fourier transform infrared Studies, and thermogravimetric and differential thermal analysis show that the nanorods have the structural formula of Eu(1,3,5-BTC)center dot 6H(2)O. Upon UV excitation, these nanorods exhibit a highly efficient luminescence. which comes from the Eu3+ ions. Moreover, Eu2O3 nanorods Could also be obtained via a thermal decomposition method using the corresponding complex as a precursor. This synthetic route is promising for the preparation of other one-dimensional crystalline nanomaterials because of its simplicity and the low cost of the starting reagents.

White electroluminescence from a single-polymer system with simultaneous two-color emission: Polyfluorene as blue host and 2,1,3-benzothiadiazole derivatives as orange dopants on the side chain

Four single polymers with two kinds of attachment of orange chromophore to blue polymer host for white electroluminescence (EL) were designed. The effect of the side-chain attachment and main-chain attachment on the EL efficiencies of the resulting polymers was compared. The side-chain-type single polymers are found to exhibit more efficient white EL than that of the main-chain-type single polymers. Based on the side-chain-type white single polymer with 4-(4-alkyloxy-phenyl)-7-(4-diphenylamino-phenyl)-2,1,3-benzothiadiazoles as the orange-dopant unit and polyfluorene as the blue polymer host, white EL with simultaneous orange (lambda(max) = 545 nm) and blue emission (lambda(max) = 432 nm/460 nm) is realised. A single-layer device (indium tin oxide/poly(3,4-ethylenedioxythiophene)/polymer/Ca/Al) made of these polymers emits white light with the Commission Internationale de l'Eclairage coordinates of (0.30,0.40), possesses a turn-on voltage of 3.5 V, luminous efficiency of 10.66 cd A(-1), power efficiency of 6.68 lm W-1, and a maximum brightness of 21240 cd m(-2).

Green light-emitting polyfluorenes with improved color purity incorporated with 4,7-diphenyl-2,1,3-benzothiadiazole moieties

By incorporating 4,7-diphenyl- 2,1,3 benzothiadiazole instead of 2,1,3-benzothiadiazole into the backbone of polyfluorene, we developed a novel series of green light- emitting polymers with much improved color purity. Compared with the state-of-the-art green light-emitting polymer, poly(fluorene-co-benzothiadiazole) (lambda max = 537 nm), the resulting polymers (lambda(max) = 521 nm) showed 10-20 nm blueshifted electroluminescence (EL) spectra and greatly improved color purity because the insertion of two phenylene units between the 2,1,3-benzothiadiazole unit and the fluorene unit reduced the effective conjugation length in the vicinity of the 2,1,3-benzothiadiazole unit. As a result, the resulting polymers emitted pure green light with CIE coordinates of (0.29, 0.63), which are very close to (0.26, 0.65) of standard green emission demanded by the National Television System Committee (NTSC). Moreover, the insertion of the phenylene unit did not affect the photoluminescence (PL) and EL efficiencies of the resulting polymers. PL quantum efficiency in solid films up to 0.82 was demonstrated. Single-layer devices (ITO/PEDOT/ polymer/Ca/Al) of these polymers exhibited a turn-on voltage of 4.2 V, luminous efficiency of 5.96 cd A(-1) and power efficiency of 2.21 lm W-1. High EL efficiencies and good color purities made these polymers very promising for display applications.

White electrolumineseence from a single-polymer system with simultaneous two-color emission: Polyfluorene as the blue host and a 2,1,3-benzothiadiazole derivative as the orange dopant on the main chain

New single-polymer electroluminescent systems containing two individual emission species - polyfluorenes as a blue host and 2,1,3-benzothiadiazole derivative units as an orange dopant on the main chain - have been designed and synthesized. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue(lambda(max) = 421 nm/445 nm) and orange emission (lambda(max) = 564 nm)from the corresponding emitting species. The influence of the photoluminescence (PL) efficiencies of both the blue and orange species on the electroluminescence (EL) efficiencies of white polymer light-emitting diodes (PLEDs) based on the single-polymer systems has been investigated. The introduction of the highly efficient 4,7-bis(4-(N-phenyl-N-(4-methylphenyl)amino)phenyl)-2,1,3-benzothiadiazole unit to the main chain of polyfluorene provides significant improvement in EL efficiency. For a single-layer device fabricated in air (indium tin oxide/poly(3,4-ethylenedioxythiophene): poly(styrene sulfonic acid/polymer/Ca/Al), pure-white electroluminescence with Commission Internationale de l'Eclairage (CIE) coordinates of (0.35,0.32), maximum brightness of 12 300 cd m(-2), luminance efficiency of 7.30 cd A(-1), and power efficiency of 3.34 lm W-1 can be obtained.