Bovine Biofertilizer and Water Regime Effects on Growth and Bulb Quality of Garlic

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos do período e volume de aplicação na segurança dos tratoristas aplicando herbicidas na cultura de cana-de-açúcar (Saccharum spp.)

O objetivo deste trabalho foi avaliar os efeitos do período e volume de aplicação na segurança da atividade de tratoristas aplicando herbicidas na cultura de cana-de-açúcar com o pulverizador de barra montado em trator e a eficiência de equipamentos de proteção individual (EPIs) e de uma cabina acoplada ao trator. As exposições dérmicas de 13 condições de trabalho foram avaliadas e analisadas estatisticamente por meio do delineamento inteiramente ao acaso e do esquema fatorial 3 x 2 x 2 + 1. O fator A foi a condição de exposição: 1) exposição dérmica potencial (EDP) - sem nenhuma medida de segurança; 2) exposição com cabina no trator (Cabina); e 3) exposição com as vestimentas (EPI). O fator B foi o volume de aplicação: 1) 200 L ha-1 e 2) 100 L ha-1; e o fator C foi o período de aplicação: 1) diurno e 2) noturno. Como testemunha foi avaliada a EDP do tratorista aplicando na atividade usual de 300 L de calda ha-1, no período diurno. As exposições dérmicas (EDs) aos herbicidas considerados nessas condições de trabalho foram estimadas por meio de dados substitutos das EDs avaliadas ao cátion Cu+2 adicionado como traçador nas caldas aplicadas. O pulverizador utilizado foi do modelo PJ 600, com barra de 12 m de comprimento e 24 bicos de jato plano TT 110 04 ou TT 110 02. As 13 condições de trabalho avaliadas foram classificadas como seguras (MS>1) para o tratorista aplicando os herbicidas glyphosate (48% i.a.), MSMA (48%), diuron (46,8%) + hexazinone (13,2%), clomazone (50%), sulfentrazone (50%), ametryne (50%), diuron (50%), isoxaflutole (75%), metribuzin (48%), 2,4-D (80,6%), ametryne (30%) + clomazone (20%), ametryne (73,25%) + trifloxysulfuron (1,85%) e tebuthiuron (80 %) e inseguras para o herbicida atrazine (50%), nos dois períodos e nos três volumes de aplicação, e ametryne (50%), na aplicação diurna e 100 L de calda ha-1. As aplicações noturnas e os volumes de aplicação reduzidos tornaram as condições de trabalho mais seguras, exceto para o atrazine. A eficiência dos EPIs para a aplicação de 300 L ha-1 variou de 69,5 a 89,3%, e a da cabina do trator variou entre 76,4 e 83,3%, em relação aos volumes reduzidos de 100 e 200 L ha-1.

Valores energéticos e composição bromatológica dos fenos de jureminha, feijão bravo e maniçoba para aves

Um experimento foi conduzido para determinação dos valores de energia metabolizável aparente (EMA) e energia metabolizável aparente corrigida pelo balanço de nitrogênio (EMAn) e da composição química dos fenos de feijão-bravo (FFB), jureminha (FJ) e maniçoba (FM) para uso na alimentação de aves. Duzentos e oitenta pintos com 17 dias de idade foram distribuídos aleatoriamente em sete tratamentos, em esquema fatorial 3 x 2 + 1 (três tipos de feno x dois níveis de substituição da dieta-referência + dieta-referência), com quatro repetições de dez aves. Os níveis de EMA e EMAn dos fenos de jureminha, feijão-bravo e maniçoba foram 3.205 e 2.911, 2.990 e 2.648, 2.728 e 2.419, determinados com 15% de substituição da dieta-referência pelo alimento e 2.678 e 2.371, 2.875 e 2.523, 2.277 e 1.956 com substituição de 30%, respectivamente, e evidenciaram influência do nível de substituição da dieta-referência sobre os valores de EMA e EMAn das dietas. Os valores de EMA e EMAn, para aves, dos fenos de jureminha e feijão-bravo são superiores aos do feno de maniçoba.

Efeito da qualidade do milho no desempenho de frangos de corte

Este experimento foi realizado para avaliar os efeitos do uso de milho de baixa qualidade nutricional, infestado por insetos ou fungos, sobre o desempenho de frangos de corte em rações para a fase inicial. Um total de 400 pintos não-sexados da linhagem Ross foi distribuído em delineamento inteiramente casualizado com cinco tratamentos e quatro repetições, de acordo com a qualidade dos grãos de milho usado nas rações iniciais (1 a 28 dias). O milho não-infestado foi usado na ração testemunha, e substituido com níveis de 20 ou 40% de grãos de milho infestados por insetos e por 20 ou 40% de grãos de milho infestados por fungos. Ganho de peso, consumo de ração e conversão alimentar, no período de 1 a 28 e 29 a 49 dias e no período total, não foram influenciados pelos tratamentos. As relações entre o peso dos órgãos e o peso corporal foram crescentes para fígado e bursa of Fabricius, à medida que o milho com níveis de infestação por insetos ou fungos aumentaram, principalmente para a fúngica. À necropsia realizada aos 29 e 51 dias de idade dos frangos, identificou-se o aumento da freqüência de problemas de pernas e lesões hepáticas nos tratamentos que continham milho infestado com insetos ou fungos em sua composição. Os níveis de infestação por insetos ou fungos usados não influíram no desempenho dos frangos, porém podem contribuir para aumentar a incidência de problemas metabólicos, fatores que não se refletem no desempenho do frango de corte, mas que aumentam as taxas de condenação de carcaça.

Gestão agroindustrial: um estudo sobre o modelo SEBRAE-RN de produção de mel de abelha no Rio Grande do Norte

The present study makes an analysis of the Development Program of Beekeeping on Rio Grande do Norte, evaluating the model of management implanted for the SEBRAE/RN in the production of bee honey in Rio Grande do Norte; on the basis of the annual reports emitted by the company in 2003, 2004 and 2005 a discerning survey is done in order to identify to the positive points and the possible imperfections that need to be readjusted, or to be substituted for the success of the program; a bibliographical study of the main authors of the subject with the purpose to gound the study, necessary base for the good performance of this work; the study made with the reports identifies some readjustments that need to be corrected, that will be suggested in the end of this study. However the work developed for the SEBRAE/RN is of good quality and the identified negative points do not compromise the good performance of the program, but it can delay the success desired; Despite the studied reports being inconsistent in some points, it can be identified significant improvements with the result of the work developed for the SEBRAE/RN, among others the creation of financial alternatives for the agriculturists who deal with the beekeeping, the employment, income and development of the enterprising capacity of the producers. However, is verified that it would have to exist more efficient ways that made possible a bigger interaction among the managers of the program and the participant public so that the continuous and necessary improvements were made to any well guided project

Consumo e digestibilidade total e parcial de dietas utilizando farelo de girassol e três fontes de energia em novilhos confinados

Avaliaram-se o consumo alimentar, a digestibilidade parcial e total e o balanço de nitrogênio, em novilhos confinados. Foram utilizados três novilhos de corte cruzados, canulados no rúmen e no duodeno, distribuídos em dois delineamentos em quadrado latino 3 x 3. As dietas experimentais foram constituídas de 60% de silagem de milho, tendo como fonte de proteína o farelo de girassol e, como fonte de energia, o milho (MI). O milho foi substituído parcialmente pela casca de soja (CS) ou pelo farelo de gérmen de milho (FGM). Quatro indicadores internos (lignina e FDA, FDN e lignina indigestíveis) foram submetidos a 144 horas de digestão in vitro, para estimativa da digestibilidade parcial e total das dietas. Houve maior ingestão dos componentes fibrosos na dieta CS, porém não foi observado efeito sobre o consumo de matéria seca. A lignina subestimou significativamente a digestibilidade. A utilização da FDAi, FDNi e lignina-i para estimar a digestibilidade total é viável, no entanto, a FDAi e lignina-i não estimaram adequadamente as digestibilidades parciais. Houve efeito significativo na digestibilidade ruminal da FDA, com valores mais elevados para CS e semelhantes para FGM, em relação à dieta MI. A digestibilidade total da FDA foi maior na dieta CS, porém, as digestibilidades dos demais componentes não foram afetadas pelas diferentes fontes energéticas. Não houve diferença significativa para a digestibilidade da energia e nos valores obtidos de NDT, com média de 61,5%. A casca de soja e o farelo de gérmen de milho, em substituição parcial do milho, mostraram-se fontes alternativas satisfatórias para a inclusão na dieta de bovinos.

Desempenho, parâmetros plasmáticos e características de carcaça de novilhos alimentados com farelo de girassol e diferentes fontes energéticas, em confinamento

Avaliaram-se consumo, desempenho, parâmetros plasmáticos e características de carcaça de 24 novilhos, 3/4 Simental 1/4 Nelore, com peso médio inicial de 370 kg. As dietas foram compostas por 55% de silagem de milho e diferentes fontes energéticas: milho (MI) e substituição parcial do milho pela casca de soja (CS) ou pelo farelo de gérmen de milho (FGM), tendo como fonte de proteína o farelo de girassol. O período de avaliação de consumo e ganho de peso foi de 49 dias. Foram realizadas amostragens de sangue para mensuração dos parâmetros plasmáticos: glicose, uréia, proteína total e albumina. As meia-carcaças direitas resfriadas foram utilizadas para medir a área de olho de lombo (AOL), a espessura de gordura (EG) e o comprimento de carcaça. As dietas não influenciaram os parâmetros plasmáticos. A média obtida para uréia plasmática foi elevada (26,1 mg/dL). As diferentes fontes energéticas não afetaram o ganho de peso e a conversão alimentar, com médias de 1,15 kg/dia e 9,17 kg de MS ingerida/kg de ganho. Não houve efeito sobre o rendimento de carcaça (52,8% peso final e 63,11% PCV), AOL (63,6 cm²) e EG (4,7 mm). O grão de milho pode ser substituído parcialmente pela casca de soja e pelo farelo de gérmen de milho, em dietas para novilhos em confinamento, sem afetar o desempenho e as características de carcaça, permitindo que a escolha entre esses ingredientes seja realizada pela análise econômica.

Comparison of non-linear growth models to describe the growth curve in West African Dwarf sheep

The objectives of this study were to compare the goodness of fit of four non-linear growth models, i.e. Brody, Gompertz, Logistic and Von Bertalanffy, in West African Dwarf (WAD) sheep. A total of 5274 monthly weight records from birth up to 180 days of age from 889 lambs, collected during 2001 to 2004 in Betecoucou breeding farm in Benin were used. In the preliminary analysis, the General Linear Model Procedure of the Statistical Analysis Systems Institute was applied to the dataset to identify the significant effects of the sex of lamb (male and female), type of birth (single and twin), season of birth (rainy season and dry season), parity of dam (1, 2 and 3) and year of birth (2001, 2002, 2003 and 2004) on the observed birth weight and monthly weight up to 6 months of age. The models parameters (A, B and k), coefficient of determination (112), mean square error (MSE) were calculated using language of technical computing package Matlab(R), 2006. The mean values of A, B and k were substituted into each model to calculate the corresponding Akaike's Information Criterion (AIC). Among the four growth functions, the Brody model has been selected for its accuracy of fit according to the higher R(2), lower MSE and A/C Finally, the parameters A, B and k were adjusted in Matlab(R) 2006 for the sex of lamb, year of birth, season of birth, birth type and the parity of ewe, providing a specific slope of the Brody growth curve. The results of this study suggest that Brody model can be useful for WAD sheep breeding in Betecoucou farm conditions through growth monitoring.

Obtenção de pós de Nb a partir da redução aluminotérmica com ignição por plasma

The aluminothermic reduction consists in an exothermic reaction between a metallic oxide and aluminum to produce the metal and the scum. The extracted melted metal of that reaction usually comes mixed with particles of Al2O3 resulting of the reduction, needing of subsequent refine to eliminate the residual impure as well as to eliminate porosities. Seeking to obtain a product in powder form with nanometric size or even submicrometric, the conventional heat source of the reaction aluminothermic , where a resistor is used (ignitor) as ignition source was substituted, for the plasma, that acts more efficient way in each particle of the sample. In that work it was used as metallic oxide the niobium pentoxide (Nb2O5) for the exothermal reaction Nb2O5 + Al. Amounts stoichiometric, substoichiometric and superestoichiometric of aluminum were used. The Nb2O5 powder was mixed with aluminum powder and milled in planetarium of high energy for a period of 6 hours. Those powders were immerged in plasm that acts in a punctual way in each particle, transfering heat, so that the reaction can be initiate and spread integrally for the whole volume of the particle. The mixture of Nb2O5 + Al was characterized through the particle size analysis by laser and X-ray diffraction (DRX) and the obtained product of reaction was characterized using the electronic microscopy of sweeping (MEV) and the formed phases were analyzed by DRX. Niobium powders with inferior sizes to 1 mm were obtained by that method. It is noticed, through the analysis of the obtained results, that is possible to accomplish the aluminothermic reduction process by plasma ignition with final particles with inferior sizes to the original oxide

Mecanismos de desgaste de poliuretano em ensaios de microabrasão

Wear mechanisms and thermal history of two non-conforming sliding surfaces was investigated in laboratory. A micro-abrasion testing setup was used but the traditional rotative sphere method was substituted by a cylindrical surface of revolution which included seven sharp angles varying between 15o to 180o. The micro-abrasion tests lead to the investigation on the polyurethane response at different contact pressures. For these turned counterfaces with and without heat treatment. Normal load and sliding speeds were changed. The sliding distance was fixed at 5 km in each test. The room and contact temperatures were measured during the tests. The polyurethane was characterized using tensile testing, hardness Shore A measurement, Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Thermomechanical Analyze (TMA). The Vickers micro-hardness of the steel was measured before and after the heat treatment and the metallographic characterization was also carried out. Worn surface of polyurethane was analysed using Scanning Electron Microscope (SEM) and EDS (Electron Diffraction Scanning) microanalyses. Single pass scratch testing in polyurethane using indenters with different contact angles was also carried out. The scar morphology of the wear, the wear mechanism and the thermal response were analyzed in order to correlate the conditions imposed by the pressure-velocity pair to the materials in contact. Eight different wear mechanisms were identified on the polyurethane surface. It was found correlation between the temperature variation and the wear scar morphology.

Mapeamento geoambiental do campo de dunas Pirangi-Potengi com ênfase a San Vale e Lagoinha Natal/RN: um instrumento de apoio ao planejamento ambiental

The city of Natal-RN is constructed on dune areas with wavy relives softly waved and green areas that help to keep a pleasant climate, amongst these is distinguished field Pirangi-Potengi the dune with the areas of San Vale and Lagoinha. These environments are being substituted gradual for property and other workmanships of engineering on behalf of the urban expansion. This study the elaboration of a geoambiental mapping of Field had as objective generality Pirangi-Potengi the Dune with emphasis the San Vale and Lagoinha in Natal-RN. The done mapping had as objective specific to elaborate a vegetation map, a map of registers in cadastre of ambient problems to dunes, a map of flooding susceptibility, a map of vulnerability to the underground water contamination and a map of use and occupation of the ground. Of the carried through analysis, the area in study reveals sufficiently degraded, remaining only few green areas and dunares, as well as, the vulnerable presence of areas of vulnerability in floods and areas the contamination of the water-bearing one. The gotten results allow to affirm that this type of mapping, is of great importance for analysis and evaluation of the environment of the city

Incorporação do lodo de tanque séptico como matéria-prima de uma mistura asfáltica

In Natal/RN, 68% of the population uses some kind of individual system for their domestic sewers treatment, being that the most used it is septic tank, followed by sumidouro. Every treatment system of sewers, usually used, generates a by-product denominated sludge. That residue presents some components, in its constitution, undesirable under the environmental and sanitary point of view. In such case, to assure that the system treatment has satisfactory results, it is necessary to do the adjusted disposition of the sludge sewage. Several countries are looking for technical alternatives for the use and disposition of residues. Under technical and environmental conditions appropriate, these materials can be used, decreasing the consumption of the natural resources and the treatment need, storage or elimination of the wastes, what decrease the risks created. Some of the alternatives of recycling of the sludge sewage are: the application in the agriculture, in the production of energy and as raw material in the civil construction. This study evaluated asphalt mixtures behavior that partially substituted conventional aggregates by septic tank sludge. The septic tank sludge gave origin to two raw materials called raw sludge and sludge ash. The raw sludge was put as a small aggregate and the sludge ash as filler. In the first experiment it was made a comparison between the mixture with conventional aggregates and the mixtures that replaced sand by raw sludge in the proportions from 5% to 40%. In the second experiment, it was made comparison between mixtures with 1%, 2% and 3% of sludge ash and cement. The stages developed along the study were: physical characterization of the conventional materials; physical, chemistry, thermal, mineralogical characterizations and analysis of environmental risk of the raw sludge; physical characterization and analysis of environmental risk of the sludge ash; analysis of the mixtures performance through its volumetric and mechanical characteristics; forecast of the mixtures susceptibility in the moisture presence. For the grain size composition used and with the percentage asphalt adopted, the mixtures with up to 7,5% of raw sludge in his composition attend to the National Department of Transports Infrastructure (DNIT) specifications. However, in agreement with the mixtures susceptibility in the moisture presence, the mixtures with addition of raw sludge don't present satisfactory acting. In such case, they could be used in arid and semi-arid areas. The raw sludge application in mixtures increased their voids volume and their stability. However, it damaged mixtures adhesiveness. Mixtures with sludge ash and with cement presented similar behavior. However, mixtures with sludge ash presented a better performance than mixtures with cement as for their stability and their tensile strength ratio. The mixture with 1% of sludge ash is better. The wastes studied don't represent environmental risk

Purification and structural characterisation of (1 -> 3 ; 1 -> 6)-beta-D-glucans (botryosphaerans) from Botryosphaeria rhodina grown on sucrose and fructose as carbon sources: a comparative study

Two botryosphaerans, exopolysaccharides (EPS) secreted by the ascomyceteous fungus Botryosphaeria rhodina, when grown on sucrose and fructose as sole carbon sources, were structurally compared after their isolation from the culture medium. Both EPS were submitted to trypsin digestion, and eluted as a single peak on gel filtration. Total acid hydrolysis yielded only glucose, and data from methylation analysis and Smith degradation indicated that both EPS constituted a main chain of glucopyranosyl beta(1 -> 3) linkages substituted at O-6. The products obtained after partial acid hydrolysis demonstrated side chains consisting of glucosyl- and gentiobiosyl- linked beta(1 -> 6) residues. C-13-NMR spectroscopy studies showed that all glucosidic linkages were of the beta-configuration. The carbon source affected the side chain structures of botryosphaeran but not the main chain makeup. Sucrose produced less branching (21%) than fructose (31%). (c) 2005 Published by Elsevier Ltd.

Langmuir and Langmuir-Blodgett (LB) films of tetrapyridyl metalloporphyrins

We report on the formation of Langmuir films of 5,10,15,20-tetra(4-pyridyl) 21H,23H-porphine,hereafter named tetrapyridyl porphyrins with distinct central ions (2H(+), Zn(2+), Cu(2+), Ni(2+)). The films were characterized with surface pressure and surface potential isotherms and in situ UV-vis absorbance. The measurements indicated strong aggregation of porphyrin monomers at the air-water interface, with a red shift of the Soret band in comparison with the spectrum obtained from CHCl(3) solutions. The shift was larger for the non-substituted H(2)TPyP, and depended on the metal ion. Significantly, aggregation occurred right after spreading of the Langmuir film, with on further shifts in the UV-vis spectra upon compression of the film, or even after transferring them onto solid substrates in the form of Langmuir-Blodgett (LB) films. The buildup of LB films from H(2)TPyP and ZnTPyP was monitored with UV-vis spectroscopy, indicating an equal amount of material deposited in each deposition step. Using FTIR in the transmission and reflection modes, we inferred that the H(2)TPyP molecules exhibit no preferential orientation in the LB films, while for ZnTPyP there is preferential orientation, with the porphyrin molecules anchored to the substrate by the lateral pyridyl groups. (C) 2008 Elsevier B.V. All rights reserved.

Purificação e caracterização de uma gentioexaose obtida de botriosferana por hidrólise ácida parcial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)