Influência da pigmentação, técnica de união e envelhecimento acelerado sobre a resistência de união entre resina acrílica e silicone facial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação histomorfológica da movimentação dentária induzida em ratos com diferentes tipos de força sob ação da terapia a laser em baixa intensidade

Pós-graduação em Odontologia - FOA

Prevalence of risk factors for stuttering among boys: analytical cross-sectional study

CONTEXTO E OBJETIVO:Há poucos estudos sobre os fatores de risco para os subgrupos de gagueira. O objetivo deste estudo foi caracterizar os fatores de risco para a gagueira desenvolvimental familial em meninos que gaguejam e que não gaguejam como tipologia das disfluências, fatores qualitativos e comunicativos associados, estresse físico e emocional, atitude familiar e reação pessoal.TIPO DE ESTUDO E LOCAL:Estudo transversal analítico com um grupo controle, realizado no Laboratório de Estudo da Fluência, que faz parte do Departamento de Fonoaudiologia de uma universidade pública.MÉTODOS:Pais de 40 meninos com e sem gagueira pareados por idade fizeram parte do estudo. Os participantes foram divididos em dois grupos: crianças com gagueira e crianças sem gagueira, com idades entre 6 anos 0 meses e 11 anos 11 meses Inicialmente todos os participantes foram submetidos a uma avaliação de fluência e depois os dados foram coletados por meio do Protocolo de Risco para a Gagueira do Desenvolvimento.RESULTADOS:Não foi observada diferença nos fatores de estresse físicos e reações pessoais entre os grupos. As atitudes inadequadas familiares foram apresentadas por 95% das crianças com gagueira e 30% das crianças sem gagueira. Quatro fatores de risco analisados não ocorreram nas crianças sem gagueira, a saber, disfluências gagas, fatores qualitativos, estresse físico e emocional.CONCLUSÕES:Os achados sugerem que a presença de disfluências gagas, fatores qualitativos e comunicativos associados, estresse emocional e atitude familiar inadequada são fatores de risco importantes para a gagueira desenvolvimental familial em meninos.

Perfil da fluência: análise comparativa entre gagueira desenvolvimental persistente familial e isolada

PURPOSE: to evaluate and compare the fluency between the familial and the sporadic persistent developmental stuttering, characterizing the typology and the frequency of the disfluencies, the speech rate and the severity of the stuttering. METHOD: 40 participants aged from 6 to 42 years old, divided in two groups with twenty participants in each one: Familial Persistent Developmental Stuttering and Sporadic Persistent Developmental Stuttering. The procedures used were: clinical and familial history, assessment of fluency and Stuttering Severity Instrument. RESULTS: there were no statistically significant differences between the groups regarding the frequency of stuttering like disfluencies, the flow of syllables and words per minute and the severity of stuttering. It was noted a tendency of the group with familial stuttering to show a bigger variability of the severity of stuttering, going from mild to very severe, whereas in the group with sporadic stuttering, the severity varied from mild to severe. CONCLUSION: this study represents the first effort to the characterization of the speech fluency profile of the subgroups of people who stutter, namely familial persistent developmental stuttering and sporadic persistent developmental stuttering. It is possible to conclude that the speech fluency profile of people who stutter, independently of the familial history, is similar. It is noteworthy that the occurrence of some stuttering-like disfluencies, monosyllabic word repetition, block and intrusion were different between groups.

Efeito do selante de fibrina derivado de peçonha de serpente associado a células-tronco mesenquimais na cicatrização de ferida cirúrgica em ratos

Pós-graduação em Doenças Tropicais - FMB

Caracterização da narrativa oral de história de indivíduos com transtorno do espectro alcoólico fetal

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resistência de união ao microcisalhamento de sistemas adesivos autocondicionates com graus de acidez distintos: efeito de diferentes tratamentos em substrato dentinário normal e hipermineralizado artificialmente

Pós-graduação em Ciências Odontológicas - FOAR

Gráficos de X com esquemas especiais de amostragem para o controle de médias que oscilam ou para o controle de processos que geram observações autocorrelacionadas

Pós-graduação em Engenharia Mecânica - FEG

Accuracy of genomic predictions in Bos indicus (Nellore) cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Parkinson's disease severity and motor subtype influence physical capacity components

The severity of Parkinson's disease (PD) and PD's motor subtypes influence the components of physical capacity. The aim of this study was to investigate the impact of both PD severity and motor subtype in the performance of these components. Thirty-six PD patients were assigned into four groups: Tremor (TD) initial and TD mild, akinetic-rigid (AR) initial, and AR mild. Patients' strength, balance, coordination, mobility and aerobic capacity were evaluated and groups were compared using a two-way ANOVA (severity and subtype as factors). AR presents a poorer performance than TD in almost all tests. Also this performance was worsened with the advance of the disease in AR, contrary to TD. We conclude that AR and TD subgroups are different about their performance on physical capacity components, moreover, this performance worsens with the advance of the disease of the AR group, but not for TD.

Influence of Implant Drill Materials on Wear, Deformation, and Roughness After Repeated Drilling and Sterilization

Purpose:The aim of this study was to evaluate deformation, roughness, and mass loss of stainless steel, diamond-like carbon (DLC)-coated and zirconia drills after multiple osteotomies with sterilization procedures.Materials and Methods:Drilling procedures were performed using stainless steel (G1), DLC-coated (G2), and zirconia (G3) drills. All groups were divided in subgroups 1, 2, 3, 4, and 5, corresponded to drills used 0, 10, 20, 30, and 40 times, respectively.Results:No significant differences in mass and roughness were detected among all groups and subgroups. In SEM images, all groups revealed signs of wear while coating delamination was detected in G2. Drills from G1 displayed more irregular surface, whereas cutting edges were more regular in G3.Conclusion:Zirconia drills presented more regular surfaces whereas stainless steel drills revealed more severe signs of wear. Further studies must be performed to evaluate the putative influence of these findings in heat generation.

Evaluation of Bone Heating, Drill Deformation, and Drill Roughness After Implant Osteotomy: Guided Surgery and Classic Drilling Procedure

Purpose: This study evaluated and compared bone heating, drill deformation, and drill roughness after several implant osteotomies in the guided surgery technique and the classic drilling procedure. Materials and Methods: The tibias of 20 rabbits were used. The animals were divided into a guided surgery group (GG) and a control group (CG); subgroups were then designated (G0, G1, G2, G3, and G4, corresponding to drills used 0, 10, 20, 30 and 40 times, respectively). Each animal received 10 sequential osteotomies (5 in each tibia) with each technique. Thermal changes were quantified, drill roughness was measured, and the drills were subjected to scanning electron microscopy. Results: Bone temperature generated by drilling was significantly higher in the GG than in the CG. Drill deformation in the GG and CG increased with drill use, and in the CG a significant difference between GO and groups G3 and G4 was observed. In the GG, a significant difference between GO and all other groups was found. For GG versus CG, a significant difference was found in the 40th osteotomy. Drill roughness in both groups was progressive in accordance with increased use, but there was no statistically significant difference between subgroups or between GG and CG overall. Conclusion: During preparation of implant osteotomies, the guided surgery technique generated a higher bone temperature and deformed drills more than the classic drilling procedure. The increase in tissue temperature was directly proportional to the number of times drills were used, but neither technique generated critical necrosis-inducing temperatures. Drill deformation was directly proportional to the number of times the drills were used. The roughness of the drills was directly proportional to the number of reuses in both groups but tended to be higher in the GG group.

Time reduction of light curing: Influence on conversion degree and microhardness of orthodontic composites

Introduction: The aim of this study was to assess the influence of curing time and power on the degree of conversion and surface microhardness of 3 orthodontic composites. Methods: One hundred eighty discs, 6 mm in diameter, were divided into 3 groups of 60 samples according to the composite used-Transbond XT (3M Unitek, Monrovia, Calif), Opal Bond MV (Ultradent, South Jordan, Utah), and Transbond Plus Color Change (3M Unitek)-and each group was further divided into 3 subgroups (n = 20). Five samples were used to measure conversion, and 15 were used to measure microhardness. A light-emitting diode curing unit with multiwavelength emission of broad light was used for curing at 3 power levels (530, 760, and 1520 mW) and 3 times (8.5, 6, and 3 seconds), always totaling 4.56 joules. Five specimens from each subgroup were ground and mixed with potassium bromide to produce 8-mm tablets to be compared with 5 others made similarly with the respective noncured composite. These were placed into a spectrometer, and software was used for analysis. A microhardness tester was used to take Knoop hardness (KHN) measurements in 15 discs of each subgroup. The data were analyzed with 2 analysis of variance tests at 2 levels. Results: Differences were found in the conversion degree of the composites cured at different times and powers (P < 0.01). The composites showed similar degrees of conversion when light cured at 8.5 seconds (80.7%) and 6 seconds (79.0%), but not at 3 seconds (75.0%). The conversion degrees of the composites were different, with group 3 (87.2%) higher than group 2 (83.5%), which was higher than group 1 (64.0%). Differences in microhardness were also found (P < 0.01), with lower microhardness at 8.5 seconds (35.2 KHN), but no difference was observed between 6 seconds (41.6 KHN) and 3 seconds (42.8 KHN). Group 3 had the highest surface microhardness (35.9 KHN) compared with group 2 (33.7 KHN) and group 1 (30.0 KHN). Conclusions: Curing time can be reduced up to 6 seconds by increasing the power, with a slight decrease in the degree of conversion at 3 seconds; the decrease has a positive effect on the surface microhardness.

Adhesion of substrate-adherent combinations for early composite repairs: Effect of intermediate adhesive resin application

This study evaluated the effect of intermediate adhesive resin application (IAR) on tensile bond strength (TBS) for early composite repairs in situations where substrate and repair composite bonded together were once of the same kind with the substrate (similar) and once other than the substrate material (dissimilar). Specimens from three types of composites (TPH Spectrum (TPH), Charisma (CHA) and Filtek Z250 (Z250)) were fabricated. The specimens in each composite group (n=72) were randomly divided into six subgroups (n=12). In each composite group, the similar and two dissimilar composites were bonded onto the substrates once using an IAR (Adper Single Bond Plus) and once without. After water storage for I week at 37 degrees C, substrate-adherent combinations were submitted to tensile test. Data were analyzed with three-way ANOVA and Tukey's tests (alpha=0.05). The substrate-adherent combination (p=0.0001), adherent (repair) composite (p=0.0001), and application of IAR (p=0.0001) significantly affected the results. Utilization of IAR improved the repair bond strength for all composite combinations. (C) 2013 Elsevier Ltd. All rights reserved.

Effect of Post-silanization Heat Treatments of Silanized Feldspathic Ceramic on Adhesion to Resin Cement

Purpose: To evaluate the effect of post-silanization heat treatment of a silane agent and rinsing with hot water of silanized CAD/CAM feldspathic ceramic surfaces on the microtensile bond strength between resin cement and the ceramic, before and after mechanical cycling.Materials and Methods: Blocks measuring 10 x 5.7 x 3.25 mm(3) were produced from feldspathic ceramic cubes (VITA Mark II, VITA Zanhfabrik). Each ceramic block was duplicated in composite resin using a template made of polyvinylsiloxane impression material. Afterwards, ceramic and corresponding resin composite blocks were ultrasonically cleaned and randomly divided according to the 5 strategies used for conditioning the ceramic surface (n = 10): GHF: etching with hydrofluoric acid 10% + rinsing with water at room temperature + silanization at 20 degrees C; G20: silanization; G77: silanization + oven drying at 77 degrees C; G20r: silanization + hot water rinsing; G77r: silanization + oven drying at 77 C + hot water rinsing. The resin and ceramic blocks were cemented using a dual-curing resin cement. Every group was divided in two subgroups: aging condition (mechanical cycling, designated as a) or non-aging (designated as n). All the bonded assemblies were sectioned into microsticks for microtensile bond strength (mu TBS) testing. The failure mode of the tested specimens was assessed and mu TBS data were statistically analyzed in two ways: first 2-way ANOVA (GHF, G20 and G77 in non-aging/aging conditions) and 3-way ANOVA (temperature x rinsing x aging factors, excluding GHF), followed by Tukey's test (p = 0.05).Results: The 2-way ANOVA revealed that the mu TBS was significantly affected by the surface treatment (p < 0.001) but not by aging (p = 0.68), and Tukey's test showed that G77-n/G77-a (18.0 MPa) > GHF-n/GHF-a (12.2 MPa) > G20-n/G20-a (9.1 MPa). The 3-way ANOVA revealed that the mu TBS was significantly affected by the heat treatment and rinsing factors (p < 0.001), but not affected by aging (p = 0.36). The rinsing procedure decreased, while oven drying increased the bond strengths. Group G77, in both non-aging and aging conditions (18.6-17.4 MPa), had the highest bond values. Failure modes were mainly mixed for all groups.Conclusion: Oven drying at 77 degrees C improved the bond strength between the resin cement and feldspathic ceramic, but hot water rinsing reduced the bond strength and should not be recommended.