Identification of a gene, ccr-1 (sll1242), required for chill-light tolerance and growth at 15 degrees C in Synechocystis sp PCC 6803

Synechocystis sp. PCC 6803 exposed to chill (5 degrees C)-light (100 mu mol photons m(-2) s(-1)) stress loses its ability to reinitiate growth. From a random insertion mutant library of Synechocystis sp. PCC 6803, a sll1242 mutant showing increased sensitivity to chill plus light was isolated. Mutant reconstruction and complementation with the wild-type gene confirmed the role of sll1242 in maintaining chill-light tolerance. At 15 degrees C, the autotrophic and mixotrophic growth of the mutant were both inhibited, paralleled by decreased photosynthetic activity. The expression of sll1242 was upregulated in Synechocystis sp. PCC 6803 after transfer from 30 to 15 degrees C at a photosynthetic photon flux density of 30 mu mol photons m(-2) S-1. sll1242, named ccr (cyanobacterial cold resistance gene)- 1, may be required for cold acclimation of cyanobacteria in light.

mc-Si : H/c-Si solar cell prepared by PECVD

Hetero-junction solar cells with an me-Si: H window layer were achieved. The open voltage is increased while short current is decreased with increasing the mc-Si:H layer's thickness of emitter layer. The highest of V-oc of 597 mV has obtained. When fixed the thickness of 30 nm, changing the N type from amorphous silicon layer to micro-crystalline layer, the efficiency of the hetero-junction solar cells is increased. Although the hydrogen etching before deposition enables the c-Si substrates to become rough by AFM images, it enhances the formation of epitaxial-like micro-crystalline silicon and better parameters of solar cell can be obtained by implying this process. The best result of efficiency is 13.86% with the V-oc of 549.8 mV, J(sc) of 32.19 mA center dot cm(-2) and the cell's area of 1 cm(2).

The role of Sb in the molecular beam epitaxy growth of 1.30-1.55 mu m wavelength GaInNAs/GaAs quantum well with high indium content

Sb-assisted GaInNAs/GaAs quantum wells (QWs) with high (42.5%) indium content were investigated systematically. Transmission electron microscopy, reflection high-energy electron diffraction and photoluminescence (PL) measurements reveal that Sb acts as a surfactant to suppress three-dimensional growth. The improvement in the 1.55 mu m range is much more apparent than that in the 1.3 mu m range.. which can be attributed to the difference in N composition. The PL intensity and the full-width at half maximum of the 1.55 mu m single-QW were comparable with that of the 1.3 Am QWs. (c) 2006 Elsevier B.V. All rights reserved.

Room temperature (34 degrees C) operation of strain-compensated quantum cascade lasers

A short wavelength (lambda similar or equal to 3.5 mu m) strain-compensated InxGa(1-x)As/InyAl(1-y)As quantum cascade laser is reported. Quasi-continuous wave operation of this device at 34 degrees C with an output power of 11.4mW persisted for more than 30 minutes without obvious degradation. A very low threshold current density of 1.2KA/cm(2) at this temperature was observed.

Analysis of the interfaces of [NiFe/Mo](30) and [Fe/Mo](30) multilayers

The interface states of [NiFe/Mo](30) and [Fe/Mo](30) multilayers have been investigated by x-ray small angle reflection and diffuse scattering. Significant interface roughness correlation was observed in both ultrathin [NiFe/Mo](30) and [Fe/Mo](30) multilayers. An uncorrelated roughness of about 27-3.1 Angstrom was revealed in the [NiPe/Mo](30) multilayers, which is explained as originating from a transition layer between the NiFe and the Mo layers. By the technique of diffuse scattering, it is clearly indicated that the interfacial roughness of NiFe/Mo is much smaller than that of Fe/Mo although the lattice mismatch is the same in both multilayers.

Study on the hydrolysis/precipitation behavior of Keggin Al-13 and Al-30 polymers in polyaluminum solutions

The hydrolysis/precipitation behaviors of Al3+, Al-13 and Al-30 under conditions typical for flocculation in water treatment were investigated by studying the particulates' size development, charge characteristics, chemical species and speciation transformation of coagulant hydrolysis precipitates. The optimal pH conditions for hydrolysis precipitates formation for AlCl3, PAC(A113) and PAC(A130) were 6.5-7.5, 8.5-9.5, and 7.5-9.5, respectively. The precipitates' formation rate increased with the increase in dosage, and the relative rates were AlCl3 >> PAC(A130) > PACA113. The precipitates' size increased when the dosage increased from 50 mu M to 200 mu M, but it decreased when the dosage increased to 800 AM. The Zeta potential of coagulant hydrolysis precipitates decreased with the increase in pH for the three coagulants. The isoelectric points of the freshly formed precipitates for AlCl3, PAC(A113) and PAC(A130) were 7.3, 9.6 and 9.2, respectively. The Zeta potentials of AlCl3 hydrolysis precipitates were lower than those of PAC(A113) and PAC(A130) when pH > 5.0. The Zeta potential of PAC(A130) hydrolysis precipitates was higher than that of PACA113 at the acidic side, but lower at the alkaline side. The dosage had no obvious effect on the Zeta potential of hydrolysis precipitates under fixed pH conditions. The increase in Zeta potential with the increase in dosage under uncontrolled pH conditions was due to the pH depression caused by coagulant addition. Al-Ferron research indicated that the hydrolysis precipitates of AlCl3 were composed of amorphous AI(OH)3 precipitates, but those of PACA113 and PACA130 were composed of aggregates of Al-13 and Al-30, respectively. Al3+ was the most un-stable species in coagulants, and its hydrolysis was remarkably influenced by solution pH. Al-13 and Al-30 species were very stable, and solution pH and aging had little effect on the chemical species of their hydrolysis products. The research method involving coagulant hydrolysis precipitates based on Al-Ferron reaction kinetics was studied in detail. The Al species classification based on complex reaction kinetic of hydrolysis precipitates and Ferron reagent was different from that measured in a conventional coagulant assay using the Al--Ferron method. The chemical composition of Al-a, Al-b and Al-c depended on coagulant and solution pH. The Al-b measured in the current case was different from Keggin Al-13, and the high Alb content in the AlCl3 hydrolysis precipitates could not used as testimony that most of the Al3+ Was converted to highly charged Al-13 species during AlCl3 coagulation.

On the acid-base stability of Keggin Al-13 and Al-30 polymers in polyaluminum coagulants

The acid-base stabilities of Al-13 and Al-30 in polyaluminum coagulants during aging and after dosing into water were studied systematically using batch and flow-through acid-base titration experiments. The acid decomposition rates of both Al-13 and Al-30 increase rapidly with the decrease in solution pH. The acid decompositions of Al-13 and Al-30 with respect to H+ concentration are composed of two parallel first-order and second-order reactions, and the reaction orders are 1.169 and 1.005, respectively. The acid decomposition rates of Al-13 and Al-30 increase slightly when the temperature increases from 20 to ca. 35 A degrees C, but decrease when the temperature increases further. Al-30 is more stable than Al-13 in acidic solution, and the stability difference increases as the pH decreases. Al-30 is more possible to become the dominant species in polyaluminum coagulants than Al-13. The acid catalyzed decomposition and followed by recrystallization to form bayerite is one of the main processes that are responsible for the decrease of Al-13 and Al-30 in polyaluminum coagulants during storage. The deprotonation and polymerization of Al-13 and Al-30 depend on solution pH. The hydrolysis products are positively charged, and consist mainly of repeated Al-13 and Al-30 units rather than amorphous Al(OH)(3) precipitates. Al-30 is less stable than Al-13 upon alkaline hydrolysis. Al-13 is stable at pH < 5.9, while Al-30 lose one proton at the pH 4.6-5.75. Al-13 and Al-30 lose respective 5 and 10 protons and form [Al-13] (n) and [Al-30] (n) clusters within the pH region of 5.9-6.25 and 5.75-6.65, respectively. This indicates that Al-30 is easier to aggregate than Al-13 at the acidic side, but [Al-13] (n) is much easier to convert to Alsol-gel than [Al-30] (n) . Al-30 possesses better characteristics than Al-13 when used as coagulant because the hydrolysis products of Al-30 possess higher charges than that of Al-13, and [Al-30] (n) clusters exist within a wider pH range.

酚酞型聚芳醚砜共聚物与共混物－(PP/BiS-T) PES共聚物和(PPS/PES-C)、(PPO/PES-C)共混物的合成、结构与性能研究

本工作旨在通过共聚、共混技术制备酚酞型聚芳醚砜共聚物(PP/BiS-T) PES和共混物(PPS/PES-C)、PPO/PES-C，以便改善酚酞型聚芳醚砜（PES－C）的加工性能（特别是注射加工性能）和耐溶剂性能。通过研究共聚物和共混物的微观结构，聚集态结构与性能的关系，探索改善酚酞型聚芳醚硕性能的有效途径第一部分：(PP/BiS-T) PES共聚物的合成、结构与性能(PP/BiS-T) PES共聚物是以4，4'二氯二苯砜（DCDPS）、酚酞（PP）和4，4'－二羟基二苯硫醚(BiS-T)为单体，采用固体无水K_2CO_3/NMP/TMSO_2 混合溶剂反应体系合成的。共聚反应规律研究表明：在NMP/TMSO_2混合溶剂中，共聚反应可以顺利进行，避免了交联反应的发生，并成功地合成了高分子量的(PP/BiS-T) PES共聚物。DSC分析结果表明(PP/BiS-T) PES系列属于无定形的均相共聚物体系，每一组成比例对应的共聚物只具有一个玻璃化转变温度。且随组成比例的改变呈线性变化，TBA分析结果与DSC基本一致，并证实了(PP/BiS-T) PES属于均相共聚物体系，而不是均聚物的共混物。TG分析表明：共聚物具有良好的耐热氧化稳定性BiS-T链节在分子链中起到了提高自身抗氧性的作用。1R光谱对共聚物的结构进行表征。~(13)C-NMR分析确认共聚物多属于无规共聚物。动态力学试验表明共聚物(PP/BiS-T) PES以及PES－C，在－100 ℃附近和0－100 ℃，存在着次级松驰与转变，并发现水分子的存在对这种转变（次级松驰）有一定的影响。共聚物的熔融流动性试验和溶解性试验表明共聚物(PP/BiS-T) PES具有稍好于PES－C的熔融流动性；溶解性与PES－C类似。力学试验说明共聚物属于强而硬类型的聚合物。第二部分：PPS/PES－C共混物的制备、聚集态结构与性能PPS/PES－C共混物是以联苯/二苯硕混合物为溶剂，采用溶液沉析方法制备的，DSC、WAXD，SEM和1R分析手段对共混物的聚集态结构和微观结构进行了表征。DSC分析认为共混物属于多相体系，PPS的结晶性随着PES－C含量增加而降低。DSC和SEM观察结果表明：相转变发生在PPS占40％左右。PPS占25％时，DSC曲线呈现出界面相玻璃化转变温度。共混物具有良好的耐热氧化稳定性和耐热分解稳定性。微晶大小计算结果：PES－C存在导致了PPS微晶大小降低。WAXD曲线表明PPS占50％，共混物中的PPS具有较好的结晶性。SEM观察发现：随着PES－C含量增加，PES－C由分散相（PES－C50％）变为连续相（PES－C70％）。PPS占50％或低于50％时，共混物体系不仅发生了微观相分离，而且发生了宏观相分离。M.I.指数表明共混物中PPS为连续相时，共混物具有良好的熔融流动性。溶解性试验结果：共混物具有较好的耐溶剂性。第三部分：PPO/PES－C共混物的合成、结构与性能 PPO/PES－C共混物系用溶液－涂膜法，以氯彷为溶剂制备的。讨论了由同一共混物溶液浓度下制备的共混物的互溶性随组成的改变而变化。DSC分析结果：PPO/PES－C属于部分相溶性体系。利用Fox方程推导式计算结果表明PPO在富PES－C相中具有良好的分散性；而PES－C在富PPO相中的分散性较差。共混物(PPO/PES－C)试样经丙酮浸泡后，PPO（>50％）发生了溶剂诱导结晶现象，同时丙酮促使共混物发生完全相分离。结晶溶化热显示共混物中少量的PES－C存在有利于PPO的溶剂诱导结晶。TG分析表明共混物具有良好的耐热分解稳定性和耐热氧化分解稳定性。偏光显微镜下观察到PPO球晶的存在。SEM和FT－1R分别对共混物的形态结构和微观结构进行了表征。WAXD试验证实了丙酮处理的(PPO/PES－C)（70/30），（90/10）共混物中PPO的结晶性。溶解性试验表明：PPO掺入有助于 PES－C的耐溶剂性提高。

光通信C波段硅基导模共振窄带滤波器的模拟

结合严格耦合波理论和遗传算法对C波段硅基导模共振滤波器进行了模拟分析.从模拟结果出发详细讨论了光栅周期、填充因子、光栅深度和入射角度对滤波器反射特性的影响.导模共振对光栅周期、填充因子、光栅深度和入射角度都有很高的敏感性,利用这一特点可以设计性能优异的硅基滤波器件.导模共振滤波器的共振波长峰值反射率达到了98.9%,峰值半高宽小于密集渡分复用(DWDM)O.8 nm的要求.

An asymmetric MOSFET-C band-pass filter with on-chip charge pump auto-tuning

An asymmetric MOSFET-C band-pass filter(BPF)with on chip charge pump auto-tuning is presented.It is implemented in UMC (United Manufacturing Corporation)0.18μm CMOS process technology. The filter system with auto-tuning uses a master-slave technique for continuous tuning in which the charge pump OUtputs 2.663 V, much higher than the power supply voltage, to improve the linearity of the filter. The main filter with third order low-pass and second order high-pass properties is an asymmetric band-pass filter with bandwidth of 2.730-5.340 MHz. The in-band third order harmonic input intercept point(HP3) is 16.621 dBm,wim 50 Ω as the source impedance. The input referred noise iS about 47.455μVrms. The main filter dissipates 3.528 mW while the auto-tuning system dissipates 2.412 mW from a 1.8 V power supply. The filter with the auto-tuning system occupies 0.592 mm~2 and it can be utilized in GPS (global positioning system)and Bluetooth systems.

全球变化背景下科尔沁沙地生态系统C、N循环过程

工业革命以来，由于人口的快速增加和人类活动的强烈干扰（主要包括煤炭、石油等石化燃料的燃烧、化肥生产和使用）导致土地利用/覆被变化、大气CO2浓度升高、N沉降等一系列全球环境变化问题。有关陆地生态系统生物地球化学循环，尤其是陆地生态系统C、N循环及其耦合过程方面的研究成为全球变化科学研究领域的重要内容。 干旱/半干旱地区占地球陆地总面积的1/3。与湿润地区相比较，干旱/半干旱地区生态系统稳定性比较差，往往属于生态脆弱区。因此，全球变化对干旱/半干旱地区生态系统影响更加敏感。科尔沁沙地位于我国北方干旱/半干旱地区，是我国典型的农牧交错区和生态脆弱区。科尔沁沙地是世界上人口密度最高的干旱/半干旱地区之一，人类活动对其影响剧烈。然而，有关科尔沁沙地生态系统C、N元素生物地球化学循环过程对土地利用/覆被变化、N沉降等全球变化响应及其反馈机制的研究非常缺乏。因此，本文以科尔沁沙地退化沙质草地、农田、不同年龄樟子松和杨树人工林等生态系统为对象，开展了造林、模拟N沉降和凋落物管理对生态系统C、N元素循环过程影响的研究。 在科尔沁沙地东南缘，以退化沙质草地、樟子松（Pinus sylvestris var. mongolica）人工林（15、24和30年生）、杨树（Poplus xiaozhuanica）人工林（7、11和15年生）为对象，研究草地转变为林地对生态系统C、N储量影响；以退化草地、榆树疏林草地和32年生樟子松人工林为对象，比较草地造林对土壤C、N循环过程及其土壤微生物性状的影响；以农田和5、10、15年生杨树人工林为对象，研究退耕还林对生态系统C、N储量和循环过程影响；以35年生樟子松人工林为对象，模拟研究N沉降和凋落物管理对生态系统C、N循环过程影响。通过上述研究，得到以下主要结果： （1）草地生态系统总C储量为34.38 Mg ha-1，15、24和30年生樟子松人工林生态系统总C储量分别为43.56、60.45和66.59 Mg ha-1，7、11和15年生杨树人工林生态系统总C储量分别为34.54、48.26和78.77 Mg ha-1；与农田相比，退耕5年的杨树人工林生态系统总C库储量下降13%，而10年和15年杨树人工林分别增加了176%和5倍；随着人工林年龄的增加，地上植被生物量C库储量占生态系统总C库储量的比例逐渐增加，并主要分配在树干。草地生态系统总N库储量为2.54 Mg ha-1，15、24和30年生樟子松人工林生态系统总N库储量分别为1.96、2.10和2.19 Mg ha-1，7、11和15年生杨树人工林生态系统总N库储量分别为2.27、1.84和2.60 Mg ha-1；与农田相比，退耕5年的杨树人工林生态系统总N库储量下降32%，而10年和15年杨树人工林分别增加了47%和76%；农田和草地造林后生态系统N储量依然主要分配在土壤中。 （2）草地和农田造林后土壤C、N库储量的变化受多因子的影响，例如林龄、树种种类以及立地条件等。农田和草地造林初期，土壤C、N库储量表现出下降趋势，随着林龄的增加，土壤C、N储量逐渐恢复。草地营造樟子松人工林30年后，0–60 cm深度土壤C、N储量依然显著低于草地；与草地相比，15年生杨树人工林土壤C、N储量差异不显著。在立地条件较好的情况下，10年杨树人工林土壤C、N储量已显著高于农田；然而，在立地条件相对较差的情况下，15年杨树人工林土壤C、N储量仍然与农田相比差异不显著。 （3）土地利用变化能够强烈地改变土壤C、N循环过程。与草地或疏林草地相比，32年生樟子松人工林土壤C、N、P含量显著降低；土壤C、N矿化过程发生显著变化，并且受季节变化的影响；在不同季节，土壤微生物量碳含量、代谢熵（qCO2）、微生物熵（MBC/TOC）以及土壤酶活性等在不同土地利用条件下表现出规律不一致。同样，农田退耕杨树人工林能够显著影响土壤C、N矿化过程，土壤无机氮（铵态氮+硝态氮）含量，土壤微生物量碳含量以及土壤微生物活性。草地造林在一定程度上导致土壤质量下降。而农田造林有利于土壤质量改善，尤其在在立地条件较好情况下。 （4）N添加增加对沙地樟子松人工林地上和地下C、N元素含量影响不大；N添加1年后，仅林下植被C、N含量显著增加，高氮处理（N15）凋落物N含量显著增加。N添加抑制了沙地樟子松人工林凋落物的早期分解和N、P元素释放。5、6、8和9月份土壤无机N含量均随着N输入增加表现出一定程度的增加，然而，7月份N添加导致土壤无机N含量降低。N添加对土壤潜在N矿化速率影响不显著。7和8月份N添加影响土壤C矿化速率，而其它月份影响不显著。低氮处理（N5）有利于增加土壤微生物量碳含量，而高氮处理（N15）在一定程度上降低土壤微生物量碳含量。 （5）凋落物输入变化（凋落物添加和凋落物移出）在一定程度上改变了35年生沙地樟子松人工林生态系统C、N循环过程。凋落物移出（C0）增加了林下植被C含量，降低了树木叶片N含量。凋落物移出抑制了凋落物分解和P元素的释放，而增加了C元素的早期释放速率，对N元素释放过程影响不显著。凋落物输入变化对不同月份土壤无机N含量和土壤N矿化过程影响均不显著。仅在6月份凋落物移出显著抑制了土壤C矿化速率，其它月份差异均不显著。凋落物管理对土壤微生物量碳含量影响不显著。 以上研究结果表明，土地利用变化、N沉降和凋落物输入改变等能够影响半干旱地区沙地生态系统C、N储量和循环过程。尤其是土地利用变化强烈改变沙地生态系统C、N储量、分配格局和循环过程，并且受到多因子的影响。科尔沁沙地樟子松人工林生态系统C、N元素生物地球化学循环存在密切的耦合关系。今后有必要进一步结合3S技术、同位素技术、模型模拟以及分子生物学技术等，从微观-宏观不同尺度上，研究半干旱地区沙地生态系统C、N循环过程对全球变化的响应及其反馈机制。

维生素 C 二步发酵中伴生菌的研究

在维生素 C 二步发酵中，第二步发酵为混菌发酵。氧化葡萄糖酸杆菌为产酸菌，巨大芽孢杆菌为伴生菌。巨大芽孢杆菌和氧化葡萄糖酸杆菌纯化培养的生物学特性不同于其在混菌培养中的生物学特性。种子液的组成和生物量影响 2－酮基－L－古龙酸的合成。在发酵过程中，采采取适宜的调控措施有利于产酸。Na~+和 H~+可诱导对数生长期的巨大芽孢杆菌发生自溶，Na~+诱导的自溶作用可被 Ca~++抑制。200mM Na~+ 可抑制 2－酮基－L－古龙酸的合成。H~+可抑制稳定期的巨大芽孢杆菌衰亡。本文建立了简便易行的巨大芽孢杆菌的筛选模型，并获得两株耐低 pH 和 2－酮基－L－古龙酸的突变株 Bn 和 B5，与氧化葡萄糖酸杆菌混合培养，发酵转化率可分别提高 4.1%和 3.8%。Bn和 B5 生长的最适 pH 值为 6.0～8.0，可促进氧化葡萄糖酸杆菌的生长，表现为延迟期缩短，稳定期延长。苏云金芽孢杆菌 B529 作为伴生菌与氧化葡萄糖酸杆菌组成的新混合菌系，具有抗污染、稳定高产的特性。B529 和巨大芽孢杆菌释放的分子量在 30～50kDa 和 >100kDa 的组份均可促进氧化葡萄糖酸杆菌产酸，其中 30～50kDa 的组份是促进产酸的关键物质。二菌所释放的活性物质经 Sephadex G-150 柱层析呈现不同的洗脱图谱，说明二菌释放的活性物质成分可能不同。B529 的培养上清液可增强氧化葡萄糖酸杆菌的细胞酶活力和 L－山梨糖胶氢酶的活性。新混全菌系的最适发酵条件被确定，在4M~3 发酵罐中连续被批发酵，平均糖酸转化率提高了 6.4%，发酵周期缩短 7.3h。

激波管壁AlO自由基B~2∑~+-X~2∑~+和C~2∏_r-X~2∑~+带系辐射光谱的研究

爆轰驱动过程中产生的高温高压气流对铝质膜片、激波管壁产生烧蚀和冲刷作用,以致激波管壁、端盖上附有氧化铝等杂质,而高温下AlO自由基在气体分子的高速碰撞下被激发并产生强烈的辐射,从而干扰了高温气体辐射光谱的分析。用爆轰驱动加热技术将空气加热到4 000~7 000 K,利用多通道光学分析仪对AlO自由基辐射光谱进行分析,实验发现在460~530 nm波长范围内有多支辐射非常强烈的AlO自由基B2Σ+-X2Σ+(T00=20 689 cm-1)带系辐射谱带,且每支谱带都由多个带头组成,带头间隔约为2 nm,带头处于高频位置并向低频方向伸延。通过实验与理论计算相结合,重点分析了AlO自由基B2Σ+-X2Σ+带系辐射光谱的结构特征。AlO自由基C2Πr-X2Σ+(T00=33 047 cm-1)带系辐射光谱处于270~335 nm波长范围内,其辐射强度相对于B2Σ+-X2Σ+带系较弱,并且与OH基A2Σ+-X2Π(T00=32 682 cm-1)带系辐射光谱互相干扰而难以分辨,对该波段高温空气的辐射光谱分析产生不利的影响。

镜像核~(13)N-~(13)C和~(15)N-~(15)O中的激发态晕或皮(英文)

用非线性相对论平均场对两对镜像核13N 13C和15N 15O进行了研究. 发现无论在基态还是激发态, 用两套参数所得的结合能都跟实验值很接近. 计算结果显示13N的第一激发态 (2s1 /2 )和第三激发态(1d5 /2 )各存在一个非束缚的质子晕, 而13C的第三激发态 (1d5 /2 )存在一个弱束缚的中子皮. 另外研究表明, 在另一对镜像核15N 15O的第二激发态 (2s1 /2 )和第一激发态 (2s1 /2 )分别存在一个中子晕和质子皮.

C离子束诱变产生甜高粱汁酒精酵母高产菌株的研究

利用100MeV/uC离子束对高产酒精酵母菌株进行了辐照诱变的研究。采用红四氮唑作为筛选指示剂,得到了5株产酒能力有所提高的突变酵母菌。利用甜高粱汁的发酵结果表明,T4突变菌株的产酒精能力比原始出发菌株提高了18.6%,且发酵液中的残糖含量也有所降低。随后对T4菌株在甜高粱汁中的最适宜发酵条件做了初步探索,结果表明:最适发酵温度和pH值分别为30℃和4.5。通过10l发酵罐的验证试验表明:在同样发酵条件下,T4菌株的发酵率和产酒精能力都比原始出发菌株提高了12%。