Power Minimization for CDMA under Colored Noise

Rate-constrained power minimization (PMIN) over a code division multiple-access (CDMA) channel with correlated noise is studied. PMIN is. shown to be an instance of a separable convex optimization problem subject to linear ascending constraints. PMIN is further reduced to a dual problem of sum-rate maximization (RMAX). The results highlight the underlying unity between PMIN, RMAX, and a problem closely related to PMIN but with linear receiver constraints. Subsequently, conceptually simple sequence design algorithms are proposed to explicitly identify an assignment of sequences and powers that solve PMIN. The algorithms yield an upper bound of 2N - 1 on the number of distinct sequences where N is the processing gain. The sequences generated using the proposed algorithms are in general real-valued. If a rate-splitting and multi-dimensional CDMA approach is allowed, the upper bound reduces to N distinct sequences, in which case the sequences can form an orthogonal set and be binary +/- 1-valued.

The trishanku gene and terminal morphogenesis in Dictyostelium discoideum

P>Multicellular development in the social amoeba Dictyostelium discoideum is triggered by starvation. It involves a series of morphogenetic movements, among them being the rising of the spore mass to the tip of the stalk. The process requires precise coordination between two distinct cell types-presumptive (pre-) spore cells and presumptive (pre-) stalk cells. Trishanku (triA) is a gene expressed in prespore cells that is required for normal morphogenesis. The triA- mutant shows pleiotropic effects that include an inability of the spore mass to go all the way to the top. We have examined the cellular behavior required for the normal ascent of the spore mass. Grafting and mixing experiments carried out with tissue fragments and cells show that the upper cup, a tissue that derives from prestalk cells and anterior-like cells (ALCs), does not develop properly in a triA- background. A mutant upper cup is unable to lift the spore mass to the top of the fruiting body, likely due to defective intercellular adhesion. If wild-type upper cup function is provided by prestalk and ALCs, trishanku spores ascend all the way. Conversely, Ax2 spores fail to do so in chimeras in which the upper cup is largely made up of mutant cells. Besides proving that under these conditions the wild-type phenotype of the upper cup is necessary and sufficient for terminal morphogenesis in D. discoideum, this study provides novel insights into developmental and evolutionary aspects of morphogenesis in general. Genes that are active exclusively in one cell type can elicit behavior in a second cell type that enhances the reproductive fitness of the first cell type, thereby showing that morphogenesis is a cooperative process.

Sustainable housing development through integrated strata utility and transport infrastructure

A comprehensive study was conducted on potential systems of integrated building utilities and transport power solutions that can simultaneously contain rising electricity, hot water and personal transport costs for apartment residents. The research developed the Commuter Energy and Building Utilities System (CEBUS) and quantified the economic, social and environmental benefits of incorporating such a system in future apartment developments. A decision support tool was produced to assist the exploration of the CEBUS design variants. A set of implementation guidelines for CEBUS was also developed for the property development industry.

Protocol for assessing maternal, environmental and epigenetic risk factors for dental caries in children

Background Expenditure on dental and oral health services in Australia is $3.4 billion AUD annually. This is the sixth highest health cost and accounts for 7 % of total national health expenditure. Approximately 49 % of Australian children aged 6 years have caries experience in their deciduous teeth and this is rising. The aetiology of dental caries involves a complex interplay of individual, behavioural, social, economic, political and environmental conditions, and there is increasing interest in genetic predisposition and epigenetic modification. Methods The Oral Health Sub-study; a cross sectional study of a birth cohort began in November 2012 by examining mothers and their children who were six years old by the time of initiation of the study, which is ongoing. Data from detailed questionnaires of families from birth onwards and data on mothers’ knowledge, attitudes and practices towards oral health collected at the time of clinical examination are used. Subjects’ height, weight and mid-waist circumference are taken and Body Mass Index (BMI) computed, using an electronic Bio-Impedance balance. Dental caries experience is scored using the International Caries Detection and Assessment System (ICDAS). Saliva is collected for physiological measures. Salivary Deoxyribose Nucleic Acid (DNA) is extracted for genetic studies including epigenetics using the SeqCap Epi Enrichment Kit. Targets of interest are being confirmed by pyrosequencing to identify potential epigenetic markers of caries risk. Discussion This study will examine a wide range of potential determinants for childhood dental caries and evaluate inter-relationships amongst them. The findings will provide an evidence base to plan and implement improved preventive strategies.

An adiabatic model for a two-stage double-inlet pulse tube refrigerator

A numerical modelling technique for predicting the detailed performance of a double-inlet type two-stage pulse tube refrigerator has been developed. The pressure variations in the compressor, pulse tube, and reservoir were derived, assuming the stroke volume variation of the compressor to be sinusoidal. The relationships of mass flowrates, volume flowrates, and temperature as a function of time and position were developed. The predicted refrigeration powers are calculated by considering the effect of void volumes and the phase shift between pressure and mass flowrate. These results are compared with the experimental results of a specific pulse tube refrigerator configuration and an existing theoretical model. The analysis shows that the theoretical predictions are in good agreement with each other.

Pitfalls in the Treatment of Persons with Dementia

Pitfalls in the treatment of persons with dementia Persons with dementia require high-quality health care, rehabilitation and sufficient social services to support their autonomy and to postpone permanent institutionalization. This study sought to investigate possible pitfalls in the care of patients with dementia: hip fracture rehabilitation, use of inappropriate or antipsychotic medication, social and medicolegal services offered to dementia caregiving families. Three different Finnish samples were used from years 1999-2005, mean age 78 to 86 years. After hip fracture operation, the weight-bearing restriction especially in group of patients with dementia, was associated with a longer rehabilitation period (73.5 days vs. 45.5 days, p=0.03) and the inability to learn to walk after six weeks (p<0.001). Almost half (44%) of the pre-surgery home-dwellers with dementia in our sample required permanent hospitalization after hip fracture. Potentially inappropriate medication was used among 36.2% of nursing home and hospital patients. The most common PIDs in Finland were temazepam over 15 mg/day, oxybutynin, and dipyridamole. However, PID use failed to predict mortality or the use of health services. Nearly half (48.4%) of the nursing home and hospital patients with dementia used antipsychotic medication. The two-year mortality did not differ among the users of conventional or atypical antipsychotics or the non-users (45.3% vs.32.1% vs.49.6%, p=0.195). The mean number of hospital admissions was highest among non-users (p=0.029). A high number of medications (HR 1.12, p<0.001) and the use of physical restraints (HR 1.72, p=0.034) predicted higher mortality at two years, while the use of atypical antipsychotics (HR 0.49, p=0.047) showed a protective effect, if any. The services most often offered to caregiving families of persons with Alzheimer s disease (AD) included financial support from the community (36%), technical devices (33%), physiotherapy (32%), and respite care in nursing homes (31%). Those services most often needed included physiotherapy for the spouse with dementia (56%), financial support (50%), house cleaning (41%), and home respite (40%). Only a third of the caregivers were satisfied with these services, and 69% felt unable to influence the range of services offered. The use of legal guardians was quite rare (only 4.3%), while the use of financial powers of attorney was 37.8%. Almost half (47.9%) of the couples expressed an unmet need for discussion with their doctor about medico-legal issues, while only 9.9% stated that their doctor had informed them of such matters. Although we already have many practical methods to develop the medical and social care of persons with AD, these patients and their families require better planning and tailoring of such services. In this way, society could offer these elderly persons better quality of life while economizing on its financial resources. This study was supported by Social Insurance Institution of Finland and part of it made in cooperation with the The Central Union of the Welfare for the Aged, Finland.

A theoretical model for the magnetic helicity of solar active regions

Active regions on the solar surface are known to possess magnetic helicity, which is predominantly negative in the northern hemisphere and positive in the southern hemisphere. Choudhuri et al. [Choudhuri, A.R. On the connection between mean field dynamo theory and flux tubes. Solar Phys. 215, 31–55, 2003] proposed that the magnetic helicity arises due to the wrapping up of the poloidal field of the convection zone around rising flux tubes which form active regions. Choudhuri [Choudhuri, A.R., Chatterjee, P., Nandy, D. Helicity of solar active regions from a dynamo model. ApJ 615, L57–L60, 2004] used this idea to calculate magnetic helicity from their solar dynamo model. Apart from getting broad agreements with observational data, they also predict that the hemispheric helicity rule may be violated at the beginning of a solar cycle. Chatterjee et al. [Chatterjee, P., Choudhuri, A.R., Petrovay, K. Development of twist in an emerging magnetic flux tube by poloidal field accretion. A&A 449, 781–789, 2006] study the penetration of the wrapped poloidal field into the rising flux tube due to turbulent diffusion using a simple 1-d model. They find that the extent of penetration of the wrapped field will depend on how weak the magnetic field inside the rising flux tube becomes before its emergence. They conclude that more detailed observational data will throw light on the physical conditions of flux tubes just before their emergence to the photosphere.

After the rains: Water’s impact for valuation practices

Purpose The purpose of this paper is to reduce the potential for litigation by improving valuers’ awareness of water risks. As part of a valuer’s due diligence, the paper provides guidance as to how to identify such risks by explaining the different types and examining how online search tools can be used in conjunction with more traditional methods to evaluate the probability of these risks occurring. Design/methodology/approach The paper builds on prior research, which examined the impact of water to and for valuations. By means of legal/doctrinal analysis, this paper considers relevant issues from the perspective of managing client expectations and needs. In so doing it identifies online tools available to assist in identifying at risk properties and better informing clients. Findings While the internet provides a variety of tools to gain access to relevant information, this information most commonly is only provided subject to disclaimer. Valuers need to ensure that blind reliance is not given to use of these tools but that the tools are used in conjunction with individual property inspections. Research limitations/implications Although the examples considered primarily are Australian, increasing water risks generally make the issues considered relevant for any jurisdiction. The research will be of particular interests to practitioners in coastal or riverine areas. Practical implications Valuation reports are sought for a variety of purposes from a variety of clients. These range from the experienced, knowledgeable developer looking to maximise available equity to the inexperienced, uneducated individual looking to acquire their home and thinking more often than not with their heart not their head. More informed practices by valuers will lead to valuation reports being more easily understood by clients, thus lessening the likelihood of litigation against the valuer for negligence. Originality/value The paper highlights the issue of water risks; the need for valuers to properly address potential and actual risks in their reports; and the corresponding need to undertake all appropriate searches and enquiries of the property to be valued. It reinforces the importance of access to the internet as a tool in the valuation process.

Experimental studies on a two stage pulse tube cryocooler reaching 2.5K

A two stage Pulse Tube Cryocooler (PTC) is designed and fabricated which reaches a no-load temperature of 2.5K in the second stage and similar to 60 K in the first stage respectively. The system provides a cooling power of similar to 250 mW at 5K in the second stage. Stainless steel meshes (size 200) and lead (Pb) granules are used as the first stage regenerator materials and combination of Pb with Er3Ni / HoCu2 are used as the second stage regenerator materials. The system operates at 1.6 Hz using a 6 kW water cooled helium compressor. Studies conducted by varying the dimensions of Pulse Tubes and regenerators show that the dimensions of the Pulse Tubes are more critical to the performance of the Cryocooler than those of the regenerators. Experimental studies show that the optimum volume ratios of Er3Ni to Pb and HoCu2 to Pb in the second stage regenerator should be 3:2 and 2:3 respectively for the best performance. Further, systems with HoCu2 performed better than those with Er3Ni. The theoretical analysis of the system has been carried out using a simple isothermal model. The experimentally measured cooling powers are in good agreement with the theoretical predictions.

Cultures of sharing in 3D printing: What can we learn from the licence choices of Thingiverse users?

This article contributes to the discussion by analysing how users of the leading online 3D printing design repository Thingiverse manage their intellectual property (IP). 3D printing represents a fruitful case study for exploring the relationship between IP norms and practitioner culture. Although additive manufacturing technology has existed for decades, 3D printing is on the cusp of a breakout into the technological mainstream – hardware prices are falling; designs are circulating widely; consumer-friendly platforms are multiplying; and technological literacy is rising. Analysing metadata from more than 68,000 Thingiverse design files collected from the site, we examine the licensing choices made by users and explore the way this shapes the sharing practices of the site’s users. We also consider how these choices and practices connect with wider attitudes towards sharing and intellectual property in 3D printing communities. A particular focus of the article is how Thingiverse structures its regulatory framework to avoid IP liability, and the extent to which this may have a bearing on users’ conduct. The paper has three sections. First, we will offer a description of Thingiverse and how it operates in the 3D printing ecosystem, noting the legal issues that have arisen regarding Thingiverse’s Terms of Use and its allocation of intellectual property rights. Different types of Thingiverse licences will be detailed and explained. Second, the empirical metadata we have collected from Thingiverse will be presented, including the methods used to obtain this information. Third, we will present findings from this data on licence choice and the public availability of user designs. Fourth, we will look at the implications of these findings and our conclusions regarding the particular kind of sharing ethic that is present in Thingiverse; we also consider the “closed” aspects of this community and what this means for current debates about “open” innovation.

Open-access more harm than good in developing world

The traditional 'publish for free and pay to read' business model adopted by publishers of academic journals can lead to disparity in access to scholarly literature, exacerbated by rising journal costs and shrinking library budgets. However, although the 'pay to publish and read for free' business model of open-access publishing has helped to create a level playing field for readers, it does more harm than good in the developing world.

Reengaging, reenacting and reenvisaging discourses of disaster through public space performance: Austerity, art, and the art of protest

This paper offers a mediation on disaster, recovery, resilience, and restoration of balance, in both a material and a metaphorical sense, when ‘disaster’ befalls not the body politic of the nation but the body personal. In the past few decades, of course, artists, activists and scholars have deliberately tried to avoid describing personal, physical and phenomenological experiences of the disabled body in terms of difficulty and disaster. This has been part of a political move, from a medical model, in which disability, disease and illness are positioned as personal catastrophes, to a social model, in which disability is positioned as a social construct that comes from systems, institutions and infrastructure designed to exclude different bodies. It is a move that is responsible for a certain discomfort people with disabilities, and artists with disabilities, today feel towards performances that deploy disability as a metaphor for disaster, from Hijikata, to Theatre Hora. In the past five years, though, this particular discourse has begun rising again, particularly as people with disabilities fact their own anything but natural disasters as a result of the austerity measures now widespread across the US, UK, Europe and elsewhere. Measures that threaten people’s ability to live, and take part in social and institutional life, in any meaningful way. Measures that, as artist Katherine Araniello notes, also bring additional difficulty, danger, and potential for disaster as they ripple outwards across the tides of familial ties, threatening family, friends, and careers who become bound up in the struggle to do more with less. In this paper, I consider how people with disabilities use performance, particularly public space interventionalist performance, to reengage, renact and reenvisage the discourse of national, economic, environmental or other forms of disaster, the need for austerity, the need to avoid providing people with support for desires and interests as well as basic daily needs, particularly when fraud and corruption is so right, and other such ideas that have become an all too unpleasant reality for many people. Performances, for instance, like Liz Crow’s Bedding Out, where she invited people into her bed – for people with disabilities a symbolic space, which necessarily becomes more a public living room restaurant, office and so forth than a private space when poor mobility means they spend much time it in – to talk about their lives, their difficulties, and dealing with austerity. Or, for instance, like the Bolshy Divas, who mimic public and political policy, reports and advertising paranoia to undermine their discourses about austerity. I examine the effects, politics and ethics of such interventions, including examination of the comparative effect of highly bodied interventions (like Crow’s) and highly disembodied interventions (like the Bolshy Diva’s) in discourses of difficulty, disaster and austerity on a range of target spectator communities.

Scale-up criteria of square tank surface aerator

Oxygen transfer rate and the corresponding power requirement to operate the rotor are vital for design and scale-up of surface aerators. Present study develops simulation or scale-up criterion correlating the oxygen transsimulation fer coefficient and power number along with a parameter governing theoretical power per unit volume (X, which is defined as equal to (FR1/3)-R-4/3, where F and R are impellers' Fronde and Reynolds number, respectively). Based on such scale-up criteria, design considerations are developed to save energy requirements while designing square tank surface aerators. It has been demonstrated that energy can be saved substantially if the aeration tanks are run at relatively higher input powers. It is also demonstrated that smaller sized tanks are more energy conservative and economical when compared to big sized tanks, while aerating the same volume of water, and at the same time by maintaining a constant input power in all the tanks irrespective of their size. An example illustrating how energy can be reduced while designing different sized aerators is given. The results presented have a wide application in biotechnology and bioengineering areas with a particular emphasis on the design of appropriate surface aeration systems.

Scale-up criteria of square tank surface aerator

Oxygen transfer rate and the corresponding power requirement to operate the rotor are vital for design and scale-up of surface aerators. Present study develops simulation or scale-up criterion correlating the oxygen transsimulation fer coefficient and power number along with a parameter governing theoretical power per unit volume (X, which is defined as equal to (FR1/3)-R-4/3, where F and R are impellers' Fronde and Reynolds number, respectively). Based on such scale-up criteria, design considerations are developed to save energy requirements while designing square tank surface aerators. It has been demonstrated that energy can be saved substantially if the aeration tanks are run at relatively higher input powers. It is also demonstrated that smaller sized tanks are more energy conservative and economical when compared to big sized tanks, while aerating the same volume of water, and at the same time by maintaining a constant input power in all the tanks irrespective of their size. An example illustrating how energy can be reduced while designing different sized aerators is given. The results presented have a wide application in biotechnology and bioengineering areas with a particular emphasis on the design of appropriate surface aeration systems.

Disk-Outflow Coupling: Energetics Around Spinning BlacK Holes

The mechanism by which outflows and plausible jets are driven from black hole systems still remains observationally elusive. This notwithstanding, several observational evidences and deeper theoretical insights reveal that accretion and outflow/jet are strongly correlated. We model an advective disk-outflow coupled dynamics, incorporating explicitly the vertical flux. Inter-connecting dynamics of outflow andaccretion essentially upholds the conservation laws. We investigate the properties of the disk-outflow surface and its strong dependence on the rotation parameter of the black hole. The energetics of the disk outflow strongly depend on the mass, accretion rate, and spin of the black holes. The model clearly shows that the outflow power extracted from the disk increases strongly with the spin of the black hole, inferring that the power of the observed astrophysical jets has a proportional correspondence with the spin of the central object. In the case of blazars (BL Lacs and flat spectrum radio quasars, FSRQs), most of their emission are believed to be originated from their jets. It is observed that BL Lacs are relatively low luminous than FSRQs. The luminosity might be linked to the power of the jet, which in turn reflects that the nuclear regions of the BL Lac objects have a relatively low spinning black hole compared to that in the case of FSRQs. If extreme gravity is the source that powers strong outflows and jets, then the spin of the black hole, perhaps, might be the fundamental parameter to account for the observed astrophysical processes in an accretion powered system.