Sul rinforzo di elementi in C.A.: confronto tra varie normative

Il documento pre-normativo italiano sul rinforzo di strutture in c.a. mediante l’uso di materiale fibrorinforzato. 1.1 INTRODUZIONE La situazione unica dell’Italia per quanto riguarda la conservazione delle costruzioni esistenti, è il risultato della combinazione di due aspetti, come primo, il medio-alto rischio sismico di una gran parte di territorio, come testimoniato dalla zonizzazione sismica recente, e come secondo aspetto, l'estrema complessità di un ambiente edilizio che non ha confronto nel mondo. Le tipologie della costruzione in Italia si distinguono a quelle stimate come patrimonio storico, che in alcuni casi risalgono a circa 2000 anni fa, a quelle che sono state costruite in ultimi cinque secoli, durante e dopo il Rinascimento, che sono considerate come patrimonio culturale ed architettonico dell' Italia (e del mondo!), infine a quelle fatte in tempi recenti, considerevolmente durante e dopo il boom economico del l960 ed ora visti come antiquate. Le due prime categorie in gran parte sono composte dalle edilizie di muratura, mentre agli ultimi principalmente appartengono le costruzioni di cemento armato.

Valutazione del comportamento differito di una trave inflessa realizzata in due fasi

La presente tesi analizza il comportamento differito in una prova di flessione su quattro punti su una trave prefabbricata con getto di soletta integrativa in opera. Sono riportati i risultati della prova di carico e di rottura sulla trave. Le prove sono state eseguite presso il Laboratorio di Prove Strutture (DISTART) dell'Università di Bologna. La trave è composta di due tipi di calcestreuzzo, realizzati in tempi diversi e con proprietà meccaniche diverse. L'obiettivo della campagna sperimentale è studiare l'effetto delle fasi di costruzione sull'evoluzione delle tensioni e delle deformazioni nel tempo e sulla resistenza ultima della trave. Il comportamento sperimentale è stato confrontato con i risultati numerici ottenuti con un modello a fibre in grado di cogliere anche i fenomeni legati al creep.

Reaktive Polymere zur funktionellen Oberflächenbeschichtung

Ziel dieser Arbeit war die gezielte Modifizierung von Oberflächen mittels multifunktioneller Polymere, die ausgehend von Aktivesterpolymeren durch polymeranaloge Reaktionen unter milden Bedingungen hergestellt werden konnten. Dazu wurden die neuartigen Akivestermonomere Pentafluorphenylacrylat PFA und Pentafluorphenylmethacrylat PFMA hergestellt und polymerisiert. PFMA konnte unter RAFT-Bedingungen mittels Cumyldithiobenzoat bzw. 4-Cyano-4-((thiobenzoyl)sulfanyl)pentansäure kontrolliert polymerisiert werden. Durch den RAFT-Prozess wurden weiterhin reaktive Blockcopolymere aus PFMA und Methylmethacrylat, N Acryloylmorpholin bzw. N,N Diethylacrylamid synthetisiert. Zur Herstellung alpha, omega-endfunktionalisierter Polymere wurde PFA mit Dithiobenzoesäure-(4-dodecylbenzyl)ester polymerisiert und durch anschließende polymeranaloge Reaktionen zu thermoschaltbaren Polymeren mit unterschiedlichem LCST-Verhalten umgesetzt, die den Aufbau polymerunterstützter Lipiddoppelschichten ermöglichen. Ausgehend von poly(PFA) wurden oberflächenaktiven multifunktionellen Polymeren hergestellt und zur Oberflächenmodifizierung von anorganischen TiO2 Nanopartikeln, TiO2-Nanodrähten und MoS2-Nanopartikeln eingesetzt. Es konnten so lösliche fluoreszierende TiO2-Nanopartikel sowohl durch in situ- als auch post-Funktionalisierung hergestellt werden. Zudem konnte durch Verwendung eines multifunktionellen Polymers mit NTA-Einheiten das Enzym Silicatein auf TiO2-Nanodrähten immobilisert werden, das durch Biokristallisation Aggregate aus TiO2-Nanodrähten und Goldnanopartikeln erzeugte.

Pädagogische, musikpädagogische und curriculare Semantiken in systemtheoretischer Betrachtung - zum Umgang mit populärer Musik an allgemeinbildenden Schulen in Deutschland nach 1945

Die Dissertation untersucht die geistige Produktion im Erziehungssystem anhand des Unterrichtsgegenstands populäre Musik. Hiermit ist sie im Kernbereich der musikpädagogischen Disziplin angesiedelt – Musik und Schule. Ferner rückt die Festlegung auf populäre Musik den Schüler in seinem Alltagswissen in den Vordergrund der Betrachtung. Die Frage nach dem Umgang mit populärer Musik ist somit indirekt eine Frage nach dem Umgang mit schülernahen Erfahrungswelten in der Schule. Innerhalb dieses Forschungsprofils erhält die Arbeit ihre eigentliche Relevanz - sie zeigt auf, wie eine moderne, selbstreferentielle Musikpädagogik eigene bedeutsame Kommunikationen beobachten kann. Entworfen in Anlehnung an die Systemtheorie nach Niklas Luhmann, werden in der Arbeit die unikalen Reflexionszusammenhänge von Pädagogik und Musikpädagogik anhand der folgenden Operationsfelder offengelegt: pädagogische und musikpädagogische Fachliteratur, Lehrpläne und Schulbücher. Nach Luhmann ist es erforderlich verstehend in die Unikalität systemischer Reflexionsleistungen einzudringen, um inkonsistente Anforderungen an die Aufgabe (Musik-)Erziehung und ihre Gegenstände aufzudecken und zukünftige Systemhandlungen zu optimieren. Die Arbeit ist in drei große historische Zeitblöcke gegliedert, die ihrerseits in verschiedene disziplinäre Operationsfelder unterteilt sind. Mit Hilfe dieser zweidimensionalen historisch-interdisziplinären Sichtweise wird populäre Musik als Bezugsgröße aufgewiesen, an der die zentralen Debatten von Pädagogik und Musikpädagogik kondensieren. Anhand von Schlüsselbegriffen wie Kultur, Gesellschaft und Ästhetik aber auch didaktischen Prinzipien wie Schüler- und Handlungsorientierung oder ganzheitliche (Musik-)Pädagogik lässt sich die Vielfalt historisch gewachsener inkonsistenter/konsistenter Forderungen belegen. Aus den Beobachtungen im Umgang mit populärer Musik werden Aufgaben deutlich, die die Disziplinen, vor allem die Musikpädagogik, in der Zukunft zu leisten haben. Diese beschäftigen sich auf der einen Seite mit dem disziplinären Selbstverständnis und auf der anderen Seite mit unbeantworteten didaktischen Fragestellungen wie den Möglichkeiten und Grenzen des einzelnen populären Musikstücks im konkret-situativen Lernkontext von Musikunterricht.

Electrostatically self-assembled nanoparticles based on biomolecules

In this work, two different systems were investigated to develop fundamental understanding of the self-assembly behavior of polyelectrolytes and small organic counterions with a certain geometry. Complexes formed were characterized by light scattering in solution, as well as UV-Vis spectroscopy, analytical ultracentrifugation, gel electrophoresis, zeta potential and IR spectroscopy. The morphologies of the aggregates were observed by AFM in dried state on surface. The charge ratio, the valence and the structure of the counterion were shown to represent key parameters in the complexation. The influence of polyelectrolyte type and molecular weights was also determined for the structure formed.rnrnOne system was mainly focused on the association of double-strand DNA with non-intercalating divalent and tetravalent organic counterions. The other model system involved linear NaPSS and oligolysines. In addition, various influences on the morphology of the charged self-assembly complexes in AFM studies were discussed. It was shown that electrostatic self-assembly of DNA and non-intercalating counterions as well as of a linear synthetic polyelectrolyte with oligolysine counterions that can build mutual hydrogen bonds can yield supramolecular aggregates of a defined size. Various morphologies (flower-like, rod-like, toroidal and spherical) of the assemblies were obtained for different combinations of polyelectrolyte and counterions. Results presented in this work are of importance for the fundamental understanding of the association behavior of various polyelectrolytes and organic counterions. The selection of biopolymers for the study may give an opportunity to transfer the basic research results into biological applications, such as gene therapy or drug delivery.rn

RAB3GAP1 und RAB3GAP2 (RAB3 GTPase-activating Protein 1/2) beeinflussen die Autophagie in C. elegans und humanen Zellen

Die Proteinhomöostase wird in der Zelle von drei Stoffwechselwegen reguliert: den molekularen Chaperonen, dem Ubiquitin-Proteasom-System und dem autophagosomalen Abbauweg. Die (Makro)Autophagie verpackt und transportiert zytosolische Komponenten in Autophagosomen zu den Lysosomen, wo sie abgebaut werden. Eine Störung dieses Abbauwegs wirkt auf die Proteostase.rnIn dieser Dissertation wurde C. elegans als Modellorganismus zur Erforschung von Proteinstabilität genutzt. In einer RNAi-vermittelten Proteostase-Analyse von Chromosom I und ausgewählter zusätzlicher Gene wurde ein Wurmstamm, der ein Luc::GFP-Konstrukt im Muskel exprimiert, genutzt. Dieses Reporterprotein aggregiert unter Hitzestressbedingungen und diese Aggregation kann durch Modulatoren der Proteostase beeinflusst werden. Dabei wurden mögliche neue Faktoren der Proteinhomöostase entdeckt. Durch weitere Experimente bei denen die Aggregation von PolyQ35::YFP im AM140-System, der Paralyse-Phänotyp und die Akkumulation Thioflavin S-gefärbter Aggregate von Aβ42 im CL2006-Wurmstamm und die Effekte auf die Autophagie mittels eines GFP::LGG1-Konstrukt analysiert wurden, konnten rbg-1 und rbg-2 als neue Modulatoren der Proteinhomöostase, insbesondere der Autophagie, identifiziert werden.rnIm Säuger bilden beide Orthologe dieser Gene, RAB3GAP1 und RAB3GAP2 den heterodimeren RAB3GAP-Komplex, der bisher nur bekannt war für die Stimulation der Umwandlung der GTP-gebundenen aktiven Form zur GDP-gebundenen inaktiven Form der RAB GTPase RAB3. In Immunoblot-Analysen und mikroskopischen Darstellungen im Säugersystem konnte gezeigt werden, dass die Effekte auf die Proteostase über den autophagosomalen Abbauweg wirken. RAB3GAP1/2 wirken als positive Stimulatoren, wenn die Lipidierung von LC3-I und der autophagische Flux von LC3-II und p62/SQSTM1 betrachtet werden. Diese Effekte werden aber nicht über die RAB GTPase RAB3 vermittelt. Die Proteine FEZ1 und FEZ2 haben einen antagonistischen Effekt auf die Autophagie und wenn alle vier Komponenten RAB3GAP1, RAB3GAP2, FEZ1 und FEZ2 zusammen herunter- oder hochreguliert werden, heben sich diese Effekte auf. In Co-Immunopräzipitationen und proteomischen Analysen konnte keine direkte Interaktion zwischen dem RAB3GAP-Komplex und FEZ1/2 oder zu anderen Autophagie-Genen nachgewiesen werden.rnHier konnte der RAB3GAP-Komplex funktionell mit Proteostase und Autophagie in C. elegans und Säugerzellen assoziiert werden. Dieser Komplex zeigt Einflüsse auf die autophagosomale Biogenese indem sie die Proteostase und die Bildung von (prä)autophagosomalen Strukturen in C. elegans und die Lipidierung von LC3 und damit den autophagischen Flux der Autophagiesubstrate LC3-II und p62/SQSTM1 in Säugerzellen beeinflusst. Darüber hinaus wirkt RAB3GAP der komplexen Autophagie-Unterdrückung durch FEZ1 und FEZ2 entgegen. Somit konnte gezeigt werden, dass RAB3GAP als neuartiger Faktor auf die autophagosomale Biogenese und somit auf die Proteostase wirkt.rn

"Exterritorial" lymphocytic hypophysitis within an ovarian teratoma during pregnancy: a possible sentinel lesion?

Pituitary tissue is rarely to be found among the constituents of ovarian teratomas (dermoid cysts). In some exceptional cases, however, such ectopic pituitary anlagen may even give rise to secondary organ-specific pathologies. Akin to those of the pituitary in its natural location, these tend to be adenomas. We describe a unique example of lymphocytic hypophysitis incidentally encountered in a mature left ovarian teratoma from a 30-year-old woman in the 19th week of pregnancy. Amidst various fully differentiated derivatives of all three embryonic layers, the cyst wall also included a miniature replica of the anterior pituitary lobe 0.5 cm in diameter. While a full set of adenohypophyseal hormone-producing cell types could be identified, there was characteristic pregnancy-related hyperplasia of lactotrophs. This was further overlaid by prominent mononuclear inflammation, including infiltration by T lymphocytes, follicular aggregates of B cells, and attendant destruction of parenchyma. There was no significant inflammatory reaction elsewhere. Discounting the non-standard location, the ensemble of the clinical setting and histology were felt to be indistinguishable from the classical paradigm of lymphocytic hypophysitis complicating pregnancy. To date, lymphocytic thyroiditis is the sole form of organ-specific inflammatory process within an ovarian teratoma on record. By analogy, we hypothesize that this ectopic manifestation of immune-mediated inflammation of pituitary parenchyma may possibly be read as a preclinical sentinel lesion of lymphocytic hypophysitis.

Construction Grammar For Kids

Most accounts of child language acquisition use as analytic tools adult-like syntactic categories and schemas (formal grammars) with little concern for whether they are psychologically real for young children. Recent research has demonstrated, however, that children do not operate initially with such abstract linguistic entities, but instead operate on the basis of concrete, item-based constructions. Children construct more abstract linguistic constructions only gradually – on the basis of linguistic experience in which frequency plays a key role – and they constrain these constructions to their appropriate ranges of use only gradually as well – again on the basis of linguistic experience in which frequency plays a key role. The best account of first language acquisition is provided by a construction-based, usage-based model in which children process the language they experience in discourse interactions with other persons, relying explicitly and exclusively on social and cognitive skills that children of this age are known to possess.

Strategy and Action Plan for Sustainable Land Management in the High Pamir and Pamir-Alai Mountains

This Strategy and Action Plan was written within the framework of the project on Sustainable Land Management in the High Pamir and Pamir-Alai Mountains (PALM). PALM is an integrated transboundary initiative of the governments of the Kyrgyz Republic and the Republic of Tajikistan. It aims to address the interlinked problems of land degradation and poverty within a region that is one of Central Asia’s crucial sources of freshwater and a location of biodiversity hotspots. The project is executed by the Committee on Environment Protection in Tajikistan and the National Center for Mountain Regions Development in Kyrgyzstan, with fi nancial support from the Global Environment Facility (GEF) and other donors. The United Nations Environment Programme (UNEP) is the GEF Implementing Agency for the project, and the United Nations University (UNU) is the International Executing Agency. This Strategy and Action Plan integrates the work of three main teams of experts, namely the Pamir-Alai Transboundary Strategy and Action Plan (PATSAP) team, the Legal Task Forces, and a team of Natural Disaster Risk specialists. The PATSAP team was coordinated by the Centre for Development and Environment (CDE), University of Bern, Switzerland. The Legal Task Force was led by the Australian Centre for Agriculture and Law of the University of New England (UNE), and responsibility for the Natural Disaster Risk assessment was with the Central- Asian Institute of Applied Geosciences (CAIAG) in Bishkek, Kyrgyzstan. The development of the strategy took place from June 2009 to October 2010. The activities included fi eld study tours for updating the information base with fi rst-hand information from the local level, coordination meetings with actors from the region, and two multi-level stakeholder forums conducted in Khorog and Osh to identify priorities and to collect ideas for concrete action plans. The baseline information collected for the Strategy and Action Plan has been compiled by the experts and made available as reports1. A joint multi-level stakeholder forum was conducted in Jirgitol, Tajikistan, for in-depth discussion of the transboundary aspects. In August 2010, the draft Strategy and Action Plan was distributed among local, national, and international actors for consultation, and their comments were discussed at feedback forums in Khorog and Bishkek. This Strategy and Action Plan is intended as a recommendation. Nevertheless, it proposes concrete mechanisms for implementing the proposed sustainable land management (SLM) activities: The Regional Natural Resources Governance Framework provides the legal and policy concepts, principles, and regulatory requirements needed to create an enabling environment for SLM in the High Pamir and Pamir-Alai region at the transboundary, national, and local levels. The priority directions outlined provide a framework for the elaboration of rayon-level strategies and for strategies on specifi c topics (forestry, livestock, etc.), as well as for further development of government programmes and international projects. The action plans may serve as a pool of concrete ideas, which can be taken up by diff erent institutions and in smaller or larger projects. Finally, this document provides a basis for the elaboration and signing of targeted cooperation agreements on land use and management between the leaders of Osh oblast (Kyrgyz Republic), Gorno Badakhshan Autonomous Oblast, and Jirgitol rayon (Republic of Tajikistan).

Aportes para una sociología del cuerpo : un análisis de los usos del cuerpo en la práctica de la danza clásica, moderna y contemporánea a partir de los discursos y saberes producidos por coreógrafos y bailarines durante el siglo XX

Este plan se propone indagar cómo se construyen las concepciones del cuerpo en la práctica de la danza escénica occidental, a partir del análisis de fuentes bibliográficas escritas por maestros coreógrafos y bailarines del siglo XX. En este sentido, la danza opera como instancia de recorte específico sobre un tema más general; el de construir un aporte a los desarrollos de una teoría social del cuerpo, de reciente formación en nuestro país, en base al análisis de unos referentes empíricos concretos. Se espera poder construir líneas de análisis fructíferas que, en base a la deconstrucción del saber generado en el campo de las prácticas específicas a observar y su re-construcción con eje en los elementos de la teoría social contemporánea, articulen el problema y análisis del cuerpo, con tópicos básicos del análisis sociológico: la cuestión de la subjetividad, las nuevas formas de auto-dominio y auto-control y la cuestión de las prácticas o experiencias autónomas y disruptivas.

Aportes para una sociología del cuerpo : un análisis de los usos del cuerpo en la práctica de la danza clásica, moderna y contemporánea a partir de los discursos y saberes producidos por coreógrafos y bailarines durante el siglo XX

Este plan se propone indagar cómo se construyen las concepciones del cuerpo en la práctica de la danza escénica occidental, a partir del análisis de fuentes bibliográficas escritas por maestros coreógrafos y bailarines del siglo XX. En este sentido, la danza opera como instancia de recorte específico sobre un tema más general; el de construir un aporte a los desarrollos de una teoría social del cuerpo, de reciente formación en nuestro país, en base al análisis de unos referentes empíricos concretos. Se espera poder construir líneas de análisis fructíferas que, en base a la deconstrucción del saber generado en el campo de las prácticas específicas a observar y su re-construcción con eje en los elementos de la teoría social contemporánea, articulen el problema y análisis del cuerpo, con tópicos básicos del análisis sociológico: la cuestión de la subjetividad, las nuevas formas de auto-dominio y auto-control y la cuestión de las prácticas o experiencias autónomas y disruptivas.

Aportes para una sociología del cuerpo : un análisis de los usos del cuerpo en la práctica de la danza clásica, moderna y contemporánea a partir de los discursos y saberes producidos por coreógrafos y bailarines durante el siglo XX

Este plan se propone indagar cómo se construyen las concepciones del cuerpo en la práctica de la danza escénica occidental, a partir del análisis de fuentes bibliográficas escritas por maestros coreógrafos y bailarines del siglo XX. En este sentido, la danza opera como instancia de recorte específico sobre un tema más general; el de construir un aporte a los desarrollos de una teoría social del cuerpo, de reciente formación en nuestro país, en base al análisis de unos referentes empíricos concretos. Se espera poder construir líneas de análisis fructíferas que, en base a la deconstrucción del saber generado en el campo de las prácticas específicas a observar y su re-construcción con eje en los elementos de la teoría social contemporánea, articulen el problema y análisis del cuerpo, con tópicos básicos del análisis sociológico: la cuestión de la subjetividad, las nuevas formas de auto-dominio y auto-control y la cuestión de las prácticas o experiencias autónomas y disruptivas.

Chert petrology and geochemistry at DSDP Leg 62 Holes

Sixty-five chert, porcellanite, and siliceous-chalk samples from Deep Sea Drilling Project Leg 62 were analyzed by petrography, scanning electron microscopy, analysis by energy-dispersive X-rays, X-ray diffraction, X-ray spectroscopy, and semiquantitative emission spectroscopy. Siliceous rocks occur mainly in chalks, but also in pelagic clay and marlstone at Site 464. Overall, chert probably constitutes less than 5% of the sections and occurs in deposits of Eocene to Barremian ages at sub-bottom depths of 10 to 820 meters. Chert nodules and beds are commonly rimmed by quartz porcellanite; opal-CT-rich rocks are minor in Leg 62 sediments 65 to 108 m.y. old and at sub-bottom depths of 65 to 520 meters. Chert ranges from white to black, shades of gray and brown being most common; yellow-brown and red-brown jaspers occur at Site 464. Seventy-eight percent of the studied cherts contain easily recognizable burrow structures. The youngest chert at Site 463 is a quartz cast of a burrow. Burrow silica maturation is always one step ahead of host-rock silicification. Burrows are commonly loci for initial silicification of the host carbonate. Silicification takes place by volume-f or-volume replacement of carbonate sediment, and more-clay-rich sediment at Site 464. Nannofossils are commonly pseudomorphically replaced by quartz near the edges of chert beds and nodules. Other microfossils, mostly radiolarians and foraminifers, whether in chalk or chert, can be either filled with or replaced by calcite, opal-CT, and (or) quartz. Chemical micro-environments ultimately control the removal, transport, and precipitation of calcite and silica. Two cherts from Site 465 contain sulfate minerals replaced by quartz. Site 465 was never subaerially exposed after sedimentation began, and the formation of the sulfate minerals and their subsequent replacement probably occurred in the marine environment. Several other cherts with odd textures are described in this paper, including (1) a chert breccia cemented by colloform opal-CT and chalcedony, (2) a transition zone between white porcellanite containing opal-CT and quartz and a burrowed brown chert, consisting of radial aggregates of opal-CT with hollow centers, and (3) a chert that consists of silica-replaced calcite pseudospherules interspersed with streaks and circular masses of dense quartz. X-ray-diffraction analyses show that when data from all sites are considered there are poorly defined trends indicating that older cherts have better quartz crystallinity than younger ones, and that opal-CT crystallite size increases and opal-CT cf-spacings decrease with depth of occurrence in the sections. In a general way, depth of burial and the presence of calcite promote the ordering in the opal-CT crystal structure which allows its eventual conversion to quartz. Opal-CT in porcellanites converts to quartz after reaching a minimum d-spacing of 4.07 Å. Quartz/opal-CT ratios and quartz crystallinity vary randomly on a fine scale across four chert beds, but quartz crystallinity increases from the edge to the center of a fifth chert bed; this may indicate maturation of the silica. Twenty-four rocks were analyzed for their major- and minor-element compositions. Many elements in cherts are closely related to major mineral components. The carbonate component is distinguished by high values of CaO, MgO, Mn, Ba, Sr, and (for unknown reasons) Zr. Tuffaceous cherts have high values of K and Al, and commonly Zn, Mo, and Cr. Pure cherts are characterized by high SiO2 and B. High B may be a good indicator of formation of chert in an open marine environment, isolated from volcanic and terrigenous materials.

Directives for a Correct Diagnosis

A special Working Group, to study and develop standars related to Building Restoration, Rehabilitation and Maintenance, was formed in January 2001 in AENOR (Spanish Association for Codes and Standars) under the management of the Department of Building Construction of the School of Architecture of Madrid (DCTA-UPM). Three groups were organized to deal with different topics: Diagnosis, Techiques and Materials, and Maintenance. In this paper the differents topics in which the Diagnosis Subgroup is working are described: historical studies, constructive description of the building and building pathology. These will be basic to carry out a correct diagnosis of any type of building, whether it is historic or not. In the development of such topics, the recognizable architectural values are justified as they are prior to the diagnosis stage. As an example of the subgroup work, several pathology cards are shown which include: longitudinal cracks of mechanical origin in beams of concrete structures, façade closings and claddings, and general symptoms of installation services.

Estudio de la redistribución tensional en la interfase frp-hormigón

El uso de materiales compuestos para el refuerzo, reparación y rehabilitación de estructuras de hormigón se ha convertido en una técnica muy utilizada en la última década. Con independencia de la técnica del refuerzo, uno de los principales condicionantes del diseño es el fallo de la adherencia entre el hormigón y el material compuesto, atribuida generalmente a las tensiones en la interfaz de estos materiales. Las propiedades mecánicas del hormigón y de los materiales compuestos son muy distintas. Los materiales compuestos comúnmente utilizados en ingeniería civil poseen alta resistencia a tracción y tienen un comportamiento elástico y lineal hasta la rotura, lo cual, en contraste con el ampliamente conocido comportamiento del hormigón, genera una clara incompatibilidad para soportar esfuerzos de forma conjunta. Esta incompatibilidad conduce a fallos relacionados con el despegue del material compuesto del sustrato de hormigón. En vigas de hormigón reforzadas a flexión o a cortante, el despegue del material compuesto es un fenómeno que frecuentemente condiciona la capacidad portante del elemento. Existen dos zonas potenciales de iniciación del despegue: los extremos y la zona entre fisuras de flexión o de flexión-cortante. En el primer caso, la experiencia a través de los últimos años ha demostrado que se puede evitar prolongando el refuerzo hasta los apoyos o mediante el empleo de algún sistema de anclaje. Sin embargo, las recomendaciones para evitar el segundo caso de despegue aún se encuentran lejos de poder prever el fallo de forma eficiente. La necesidad de medir la adherencia experimentalmente de materiales FRP adheridos al hormigón ha dado lugar a desarrollar diversos métodos por la comunidad de investigadores. De estas campañas experimentales surgieron modelos para el pronóstico de la resistencia de adherencia, longitud efectiva y relación tensión-deslizamiento. En la presente tesis se propone un ensayo de beam-test, similar al utilizado para medir la adherencia de barras de acero, para determinar las características de adherencia del FRP al variar la resistencia del hormigón y el espesor del adhesivo. A la vista de los resultados, se considera que este ensayo puede ser utilizado para investigar diferentes tipos de adhesivos y otros métodos de aplicación, dado que representa con mayor realidad el comportamiento en vigas reforzadas. Los resultados experimentales se trasladan a la comprobación del fallo por despegue en la región de fisuras de flexión o flexión cortante en vigas de hormigón presentando buena concordancia. Los resultados condujeron a la propuesta de que la limitación de la deformación constituye una alternativa simple y eficiente para prever el citado modo de fallo. Con base en las vigas analizadas, se propone una nueva expresión para el cálculo de la limitación de la deformación del laminado y se lleva a cabo una comparación entre los modelos existentes mediante un análisis estadístico para evaluar su precisión. Abstract The use of composite materials for strengthening, repairing or rehabilitating concrete structures has become more and more popular in the last ten years. Irrespective of the type of strengthening used, design is conditioned, among others, by concrete-composite bond failure, normally attributed to stresses at the interface between these two materials. The mechanical properties of concrete and composite materials are very different. Composite materials commonly used in civil engineering possess high tensile strength (both static and long term) and they are linear elastic to failure, which, in contrast to the widely known behavior of concrete, there is a clear incompatibility which leads to bond-related failures. Bond failure in the composite material in bending- or shear-strengthened beams often controls bearing capacity of the strengthened member. Debonding failure of RC beams strengthened in bending by externally-bonded composite laminates takes place either, at the end (plate end debonding) or at flexure or flexure-shear cracks (intermediate crack debonding). In the first case, the experience over the past years has shown that this can be avoided by extending laminates up to the supports or by using an anchoring system. However, recommendations for the second case are still considered far from predicting failure efficiently. The need to experimentally measure FRP bonding to concrete has induced the scientific community to develop test methods for that purpose. Experimental campaigns, in turn, have given rise to models for predicting bond strength, effective length and the stress-slip relationship. The beam-type test proposed and used in this thesis to determine the bonding characteristics of FRP at varying concrete strengths and adhesive thicknesses was similar to the test used for measuring steel reinforcement to concrete bonding conditions. In light of the findings, this test was deemed to be usable to study different types of adhesives and application methods, since it reflects the behavior of FRP in strengthened beams more accurately than the procedures presently in place. Experimental results are transferred to the verification of peeling-off at flexure or flexure-shear cracks, presenting a good general agreement. Findings led to the conclusion that the strain limitation of laminate produces accurate predictions of intermediate crack debonding. A new model for strain limitation is proposed. Finally, a comprehensive evaluation based on a statistical analysis among existing models is carried out in order to assess their accuracy.