An Intelligent Threat Prevention Framework with Heterogeneous Information

Three issues usually are associated with threat prevention intelligent surveillance systems. First, the fusion and interpretation of large scale incomplete heterogeneous information; second, the demand of effectively predicting suspects’ intention and ranking the potential threats posed by each suspect; third, strategies of allocating limited security resources (e.g., the dispatch of security team) to prevent a suspect’s further actions towards critical assets. However, in the literature, these three issues are seldomly considered together in a sensor network based intelligent surveillance framework. To address
this problem, in this paper, we propose a multi-level decision support framework for in-time reaction in intelligent surveillance. More specifically, based on a multi-criteria event modeling framework, we design a method to predict the most plausible intention of a suspect. Following this, a decision support model is proposed to rank each suspect based on their threat severity and to determine resource allocation strategies. Finally, formal properties are discussed to justify our framework.

High resolution X-ray spectroscopy in fast electron transport studies

A detailed knowledge of the physical phenomena underlying the generation and the transport of fast electrons generated in high-intensity laser-matter interactions is of fundamental importance for the fast ignition scheme for inertial confinement fusion.

Here we report on an experiment carried out with the VULCAN Petawatt beam and aimed at investigating the role of collisional return currents in the dynamics of the fast electron beam. To that scope, in the experiment counter-propagating electron beams were generated by double-sided irradiation of layered target foils containing a Ti layer. The experimental results were obtained for different time delays between the two laser beams as well as for single-sided irradiation of the target foils. The main diagnostics consisted of two bent mica crystal spectrometers placed at either side of the target foil. High-resolution X-ray spectra of the Ti emission lines in the range from the Ly alpha to the K alpha line were recorded. In addition, 2D X-ray images with spectral resolution were obtained by means of a novel diagnostic technique, the energy-encoded pin-hole camera, based on the use of a pin-hole array equipped with a CCD detector working in single-photon regime. The spectroscopic measurements suggest a higher target temperature for well-aligned laser beams and a precise timing between the two beams. The experimental results are presented and compared to simulation results.

X-ray laser-induced ablation of lead compounds

The recent commissioning of a X-ray free-electron laser triggered an extensive research in the area of X-ray ablation of high-Z, high-density materials. Such compounds should be used to shorten an effective attenuation length for obtaining clean ablation imprints required for the focused beam analysis. Compounds of lead (Z=82) represent the materials of first choice. In this contribution, single-shot ablation thresholds are reported for PbWO4 and PbI2 exposed to ultra-short pulses of extreme ultraviolet radiation and X-rays at FLASH and LCLS facilities, respectively. Interestingly, the threshold reaches only 0.11 J/cm(2) at 1.55 nm in lead tungstate although a value of 0.4 J/cm(2) is expected according to the wavelength dependence of an attenuation length and the threshold value determined in the XUV spectral region, i.e., 79 mJ/cm(2) at a FEL wavelength of 13.5 nm. Mechanisms of ablation processes are discussed to explain this discrepancy. Lead iodide shows at 1.55 nm significantly lower ablation threshold than tungstate although an attenuation length of the radiation is in both materials quite the same. Lower thermal and radiation stability of PbI2 is responsible for this finding.

Chromatic Aberration

Chromatic Aberration is a film installation which explores the early technologies of colour filmmaking drawn from the archives of George Eastman House, Rochester, New York. Featuring vibrant close-ups of eyes from fledgling archival experiments in colour film, Chromatic Aberration turns the cinematic lens in on itself: from the prosthetic recording eye of the camera, to an evocation of the abstract inner screen of one's eyelids. Early 1920s colour film footage - mainly tests shots featuring members of George Eastman's family as well as Hollywood stars of the time - is shot in such a way so as to reveal the inherent chromatic fringing, distortion and misalignment. Using specialist equipment at the BFI National Archive, London, the footage is reworked through the use of extreme close-up and magnification, honing in on the eyes. The installation evokes an imagined abstract colour world, a flickering eyelid trapped in a mechanical peephole. Exhibitions: Solo exhibition as film installation at Tyneside Cinema (Newcastle, Oct-Nov 2014); Solo exhibition at George Eastman Museum (Rochester, New York, Jan-April 2015), including a second work on display. Film festivals nominations for competitions: Winner of Best Vanguard Film Competition in Lima Independiente International Film Festival (Peru). Nominations: Filmadrid festival (Spain); Curtas Vila do Conde film festival (Portugal); Festival du Nouveau Cinema (Canada); Jihlava International Documentary Film Festival (Czech Republic ); International Film Festival Bratislava (Slovenia). Additional screenings at International Rotterdam Film Festival (Netherlands); European Media Art Festival (Germany); BFI London Film Festival (UK); Mini-retrospective screening at DIM CINEMA, The Cinematheque (Vancouver May 2015). Reviews and interviews in Artforum, The Wire Magazine, After Image, Studio International. Public lectures: with Prof. Sarah Street at Tyneside Cinema (Nov 2014); Royal Academy visiting public lecture (Nov 2014); ‘The Laughter of Things’ symposium, International Film Festival Rotterdam and Piet Zwart Institute (Jan 2015); George Eastman Museum and Rochester University (April 2015). Acquired by the George Eastman Museum for their collection.

Levantamento e descrição de procedimentos e elaboração de registos na empresa Aquateste

A Aquateste é uma empresa dinâmica e tem como principais vertentes a consultoria, a recolha de amostras e análise de parâmetros de campo na área da Hotelaria e é intermediária entre os seus clientes e laboratórios estrangeiros (Lacoal, SGS Institut Fresenius e ALS Czech Republic - apenas Dioxinas). Diante de um mercado cada vez mais exigente requer portanto, uma maior estruturação da empresa de forma a cumprir com os prazos e qualidade dos serviços esperados pelos seus clientes. Deste modo torna-se obrigatório a implementação de um sistema da qualidade com o objectivo de confirmar o bom funcionamento da empresa, a qualidade no atendimento, a satisfação total e fidelização dos clientes. Embora a Aquateste seja uma empresa que faça algum trabalho de laboratório, ela executa sobretudo trabalho de escritório, por isso, não faria sentido aplicar-se a norma ISO 17025 que é a norma específica para laboratórios mas sim a familia de normas ISO 9000. Este trabalho baseia-se sobretudo na norma ISO 9001:2008 que especifica requisitos para um sistema de gestão da qualidade e tem como objectivo promover a implementação de um sistema documental que se enquadre num sistema de qualidade a implementar na empresa Aquateste. A elaboração dos procedimentos e registos elaborados foram desenvolvidos na empresa Aquateste e foram efectuados com base no estudo e pesquisa de hábitos de trabalho dos funcionários da empresa. Com todas as vantagens verificadas depois da implementação dos procedimentos e registos na empresa, neste momento, são os próprios colaboradores da empresa Aquateste que “exigem” a implementação da ISO 9001:2008.

Examining Ambrosia Pollen Episodes at Poznań (Poland) Using Back-trajectory Analysis

The pollen grains of Ambrosia spp. are considered to be important aeroallergens in parts of southern and central Europe. Back-trajectories have been analysed with the aim of finding the likely sources of Ambrosia pollen grains that arrived at Poznań (Poland). Temporal variations in Ambrosia pollen at Poznań from 1995–2005 were examined in order to identify Ambrosia pollen episodes suitable for further investigation using back-trajectory analysis. The trajectories were calculated using the transport model within the Lagrangian air pollution model, ACDEP (Atmospheric Chemistry and Deposition). Analysis identified two separate populations in Ambrosia pollen episodes, those that peaked in the early morning between 4 a.m. and 8 a.m., and those that peaked in the afternoon between 2 p.m. and 6 p.m.. Six Ambrosia pollen episodes between 2001 and 2005 were examined using backtrajectory analysis. The results showed that Ambrosia pollen episodes that peaked in the early morning usually arrived at Poznań from a southerly direction after passing over southern Poland, the Czech Republic, Slovakia and Hungary, whereas air masses that brought Ambrosia pollen to Poznań during the afternoon arrived from a more easterly direction and predominantly stayed within the borders of Poland. Back-trajectory analysis has shown that there is a possibility that long-range transport brings Ambrosia pollen to Poznań from southern Poland, the Czech Republic, Slovakia and Hungary. There is also a likelihood that Ambrosia is present in Poland, as shown by the arrival of pollen during the afternoon that originated primarily from within the country.

Long-range Transport of Ambrosia Pollen to Poland

The long-range transport of Ambrosia pollen to Poland is intermittent and mainly related to the passage of air masses over the Carpathian and Sudetes mountains. These episodes are associated with hot dry weather, a deep Planetary Boundary Layer (PBL) in the source areas and winds from the south. Such episodes can transport significant amounts of Ambrosia pollen into Poland. The study investigates Ambrosia pollen episodes at eight sites in Poland during the period 7th to 10th September 2005, by examining temporal variations in Ambrosia pollen and back-trajectories. PBL depths in the likely source areas were calculated with the Eta meteorological model and evaluated against the mountain heights. Considerable amounts of Ambrosia pollen were recorded at several monitoring sites during the night or early in the morning of the investigated period. Trajectory analyses shows that the air masses arriving at the Polish sites predominantly came from the south, and were in the Czech Republic, Slovakia and Hungary the previous day indicating these countries as potential source areas. We have shown the progress of Ambrosia plumes into Poland from the south of the country, probably from Slovakia and Hungary, and demonstrated how Lagrangian back-trajectory models and meteorological models can be used to identify possible transport mechanisms of Ambrosia pollen from potential source regions.

Investigating Ambrosia Pollen Episodes in Poland Using Back-Trajectory Analysis

Background: The pollen grains of Ambrosia spp. are considered to be important aeroallergens. Previous studies have shown that the long-range transport of Ambrosia pollen to Poland is intermittent and mainly related to the passage of air masses over the Carpathian and Sudetes mountains from sources to the south, e.g. the Czech Republic, Slovakia and Hungary. In this study, Ambrosia pollen counts and back-trajectories from specific episodes in 1999 and 2002 have been analysed with the aim of identifying possible new sources of Ambrosia pollen arriving at three sites in Poland. Method: The combination of Ambrosia pollen measurements (daily average and bi-hourly concentrations) and air mass trajectory calculations were used to investigate two Ambrosia pollen episodes recorded at Rzeszow, Krakow and Poznań on the 4th and 5th September 1999 and 3rd September 2002. Ambrosia pollen counts were recorded by volumetric spore traps of the Hirst design. Trajectories were calculated using the transport model within the Lagrangian air pollution model, ACDEP (Atmospheric Chemistry and Deposition). Results: The collective results of pollen measurements and back-trajectory analysis indicate plumes of Ambrosia pollen travelling up through Poland from the southeast during the investigated episodes. In 1999, the plume was first recorded at Rzeszow in Southeastern Poland during the morning of the 4th September. Its route can be followed as it passed Krakow during the afternoon of the 4th, and later on the 4th and 5th September at Poznań. Similarly, back-trajectories calculated during the morning and afternoon from Krakow and Rzeszow on the 3rd September 2002 indicates that the air masses arrived at these sites from the East or Southeast. Conclusion: This study shows the progress of Ambrosia plumes into Poland from the southeast. Ambrosia pollen release occurs mainly during the day and so a midday peak in Ambrosia pollen concentrations may indicate a local source. However, if the plume of Ambrosia pollen tracked along its northwesterly path over Poland during investigated episodes did not originate from inside Poland, then it is likely that it came from the Ukraine. This identifies a possible new source of ragweed pollen for Poland. Trajectory analysis can only show the path along which an air mass travels, not the specific source area. Further investigation could therefore include source based transport models such as 3D Eulerian atmospheric transport models.

The Occurrence of Ambrosia Pollen in Rzeszów, Kraków and Poznań, Poland: Investigation of Trends and Possible Transport of Ambrosia Pollen from Ukraine

Previous studies have shown that ragweed pollen arrives in Poland from sources in the south, in Slovakia, the Czech Republic, Hungary and Austria. It is likely that ragweed pollen also arrives from sources in the southeast (e.g. Ukraine). This hypothesis is investigated using 13-years of pollen data and back-trajectory analysis. Ambrosia pollen data were collected at three sites in Poland, Rzeszów, Kraków and Poznań. The amount of ragweed pollen recorded at Rzeszów was significantly higher than in Poznań and Kraków. This can be related to either a higher abundance of local populations of Ambrosia in south-east Poland or the nearness of Rzeszów to foreign sources of ragweed pollen. The combined results of pollen measurements and air mass trajectory calculations identified plumes of Ambrosia pollen that were recorded at Rzeszów, Kraków and Poznań on the 4th and 5th September 1999 and the 3rd September 2002. These plumes arrived at the pollen-monitoring sites from an easterly direction indicating sources of Ambrosia pollen in eastern Poland or Ukraine. This identifies Ukraine as a possible new source of ragweed pollen for Poland and therefore an important source area of Ambrosia pollen on the European Continent.

"Construção de uma joia-não jóia" : uma experiência no âmbito do Projecto Comenius

Relatório da Prática de Ensino Supervisionada, Mestrado em Ensino de Artes Visuais, Universidade de Lisboa, 2014

Destination images of non-visitors

This article provides much needed understanding of destination images held by non-visitors. Recognizing the characteristics of non-visitor images and their formation is important in order to understand images more widely. This qualitative study assesses images of London. The views of three hundred people in the Czech Republic who have never visited London were obtained via an innovative open-ended research instrument. The study showed that non-visitors imagine destinations through comparisons with their own experiences of places. Findings indicate that images can be very persistent and that the first images formed of a destination endure over time. Although the research is based on people with no direct experience of London, the research highlights that a range of secondary ‘experiences’ influence image formation.

Uso Sustentável de Vapor

Em 2006, a IEA (Agência Internacional de Energia), publicou alguns estudos de consumos mundiais de energia. Naquela altura, apontava na fabricação de produtos, um consumo mundial de energia elétrica, de origem fóssil de cerca 86,16 EJ/ano (86,16×018 J) e um consumo de energia nos sistemas de vapor de 32,75 EJ/ano. Evidenciou também nesses estudos que o potencial de poupança de energia nos sistemas de vapor era de 3,27 EJ/ano. Ou seja, quase tanto como a energia consumida nos sistemas de vapor da U.E. Não se encontraram números relativamente a Portugal, mas comparativamente com outros Países publicitados com alguma similaridade, o consumo de energia em vapor rondará 0,2 EJ/ano e por conseguinte um potencial de poupança de cerca 0,02 EJ/ano, ou 5,6 × 106 MWh/ano ou uma potência de 646 MW, mais do que a potência de cinco barragens Crestuma/Lever! Trata-se efetivamente de muita energia; interessa por isso perceber o onde e o porquê deste desperdício. De um modo muito modesto, pretende-se com este trabalho dar algum contributo neste sentido. Procurou-se evidenciar as possibilidades reais de os utilizadores de vapor de água na indústria reduzirem os consumos de energia associados à sua produção. Não estão em causa as diferentes formas de energia para a geração de vapor, sejam de origem fóssil ou renovável; interessou neste trabalho estudar o modo de como é manuseado o vapor na sua função de transporte de energia térmica, e de como este poderá ser melhorado na sua eficiência de cedência de calor, idealmente com menor consumo de energia. Com efeito, de que servirá se se optou por substituir o tipo de queima para uma mais sustentável se a jusante se continuarem a verificarem desperdícios, descarga exagerada nas purgas das caldeiras com perda de calor associada, emissões permanentes de vapor para a atmosfera em tanques de condensado, perdas por válvulas nos vedantes, purgadores avariados abertos, pressão de vapor exageradamente alta atendendo às temperaturas necessárias, “layouts” do sistema de distribuição mal desenhados, inexistência de registos de produção e consumos de vapor, etc. A base de organização deste estudo foi o ciclo de vapor: produção, distribuição, consumo e recuperação de condensado. Pareceu importante incluir também o tratamento de água, atendendo às implicações na transferência de calor das superfícies com incrustações. Na produção de vapor, verifica-se que os maiores problemas de perda de energia têm a ver com a falta de controlo, no excesso de ar e purgas das caldeiras em exagero. Na distribuição de vapor aborda-se o dimensionamento das tubagens, necessidade de purgas a v montante das válvulas de controlo, a redução de pressão com válvulas redutoras tradicionais; será de destacar a experiência americana no uso de micro turbinas para a redução de pressão com produção simultânea de eletricidade. Em Portugal não se conhecem instalações com esta opção. Fabricantes da República Checa e Áustria, têm tido sucesso em algumas dezenas de instalações de redução de pressão em diversos países europeus (UK, Alemanha, R. Checa, França, etc.). Para determinação de consumos de vapor, para projeto ou mesmo para estimativa em máquinas existentes, disponibiliza-se uma série de equações para os casos mais comuns. Dá-se especial relevo ao problema que se verifica numa grande percentagem de permutadores de calor, que é a estagnação de condensado - “stalled conditions”. Tenta-se também evidenciar as vantagens da recuperação de vapor de flash (infelizmente de pouca tradição em Portugal), e a aplicação de termocompressores. Finalmente aborda-se o benchmarking e monitorização, quer dos custos de vapor quer dos consumos específicos dos produtos. Esta abordagem é algo ligeira, por manifesta falta de estudos publicados. Como trabalhos práticos, foram efetuados levantamentos a instalações de vapor em diversos sectores de atividades; 1. ISEP - Laboratório de Química. Porto, 2. Prio Energy - Fábrica de Biocombustíveis. Porto de Aveiro. 3. Inapal Plásticos. Componentes de Automóvel. Leça do Balio, 4. Malhas Sonix. Tinturaria Têxtil. Barcelos, 5. Uma instalação de cartão canelado e uma instalação de alimentos derivados de soja. Também se inclui um estudo comparativo de custos de vapor usado nos hospitais: quando produzido por geradores de vapor com queima de combustível e quando é produzido por pequenos geradores elétricos. Os resultados estão resumidos em tabelas e conclui-se que se o potencial de poupança se aproxima do referido no início deste trabalho.

A Review of National Guidelines for Management of COPD in Europe

The quality of care can be improved by the development and implementation of evidence-based treatment guidelines. Different national guidelines for chronic obstructive pulmonary disease (COPD) exist in Europe and relevant differences may exist among them.This was an evaluation of COPD treatment guidelines published in Europe and Russia in the past 7 years. Each guideline was reviewed in detail and information about the most important aspects of patient diagnosis, risk stratification and pharmacotherapy was extracted following a standardised process. Guidelines were available from the Czech Republic, England and Wales, Finland, France, Germany, Italy, Poland, Portugal, Russia, Spain and Sweden. The treatment goals, criteria for COPD diagnosis, consideration of comorbidities in treatment selection and support for use of long-acting bronchodilators, were similar across treatment guidelines. There were differences in measures used for stratification of disease severity, consideration of patient phenotypes, criteria for the use of inhaled corticosteroids and recommendations for other medications (e.g. theophylline and mucolytics) in addition to bronchodilators.There is generally good agreement on treatment goals, criteria for diagnosis of COPD and use of long-acting bronchodilators as the cornerstone of treatment among guidelines for COPD management in Europe and Russia. However, there are differences in the definitions of patient subgroups and other recommended treatments.