Simplified Formulae for the Estimation of Offshore Wind Turbines Clutter on Marine Radars

The potential impact that offshore wind farms may cause on nearby marine radars should be considered before the wind farm is installed. Strong radar echoes from the turbines may degrade radars' detection capability in the area around the wind farm. Although conventional computational methods provide accurate results of scattering by wind turbines, they are not directly implementable in software tools that can be used to conduct the impact studies. This paper proposes a simple model to assess the clutter that wind turbines may generate on marine radars. This method can be easily implemented in the system modeling software tools for the impact analysis of a wind farm in a real scenario.

Aspects of quality control of wind profiler measurements in complex topography

It is well known in the scientific community that some remote sensing instruments assume that sample volumes present homogeneous conditions within a defined meteorological profile. At complex topographic sites and under extreme meteorological conditions, this assumption may be fallible depending on the site, and it is more likely to fail in the lower layers of the atmosphere. This piece of work tests the homogeneity of the wind field over a boundary layer wind profiler radar located in complex terrain on the coast under different meteorological conditions. The results reveal the qualitative importance of being aware of deviations in this homogeneity assumption and evaluate its effect on the final product. Patterns of behavior in data have been identified in order to simplify the analysis of the complex signal registered. The quality information obtained from the homogeneity study under different meteorological conditions provides useful indicators for the best alternatives the system can offer to build wind profiles. Finally, the results are also to be considered in order to integrate them in a quality algorithm implemented at the product level.

Cenários de mudanças climáticas usando modelagem dinâmica na Bacia do Alto Taquari.

A região Centro-Oeste do Brasil tornou-se nos últimos 40 anos grande produtora de grãos e carne bovina. As condições edafoclimáticas, o sistema de manejo do solo e o descumprimento de leis ambientais trouxeram conseqüências drásticas à região como o agravamento do processo hídrico erosivo, principalmente na Bacia do Alto Taquari (BAT). Cerca de 90% da BAT localiza-se na porção norte do estado de Mato Grosso do Sul (MS), porém os efeitos do transporte de sedimentos e volume de água são refletidos a jusante dos rios, na Bacia do Pantanal. Utilizando-se pressupostos do Painel Intergovernamental de Mudanças Climáticas (IPCC) foram estabelecidos cenários de mudanças climáticas na Bacia do Alto Taquari, visando identificar áreas com maior vulnerabilidade ao processo erosivo em função de pressões de uso da terra. Usando a modelagem dinâmica no TerraME (Environment Modeling) foram gerados cenários topopluviais até 2100, considerando-se para a temperatura do ar média anual um aumento de 1C, em cenário otimista e, em pessimista, elevações térmicas de 3C. Para a precipitação pluvial média anual um cenário foi com aumento de 15% e outro com reduções de 15%. Os dados foram espacializados no ArcGis 9.2 e exportados para o TerraView 3.2, criando-se espaços celulares e integrando-se com as informações do modelo digital do terreno do Shuttle Radar Topography Mission (SRTM) para geração dos mapas topoclimáticos e simulações de cenários no TerraMe. Os resultados apontam que 85% da área da BAT nas condições atuais as temperaturas médias variam entre 23,6 a 25,7C. As simulações térmicas no cenário otimista indicam que em 40 anos as temperaturas tendem a superar o maior limite térmico médio nas áreas ao longo do rio Taquari, no sentido Oeste-Leste. Esses valores evidenciam elevações nas taxas evapotranspiratórias de matas ciliares, indicando reduções na vazão do Taquari. Em cenário pessimista essas temperaturas antecipam sua ocorrência, em um prazo de 20 anos. Os cenários com acréscimo de 15% na precipitação pluvial mostram aumentos no volume de água precipitada na parte norte da Bacia, região mais vulnerável aos problemas de erosão hídrica. Cenários do regime térmico-hídrico apontam áreas mais sensíveis às mudanças climáticas na parte oeste da BAT e impactos ambientais também na Bacia do Pantanal. Conclui-se que o TerraME é indicado para gerar cenários de mudanças climáticas em bacias hidrográficas.

Evolução Quaternária da Baixada de Jacarepaguá a partir de perfis GPR

O trabalho presente tem como enfoque o estudo da evolução quaternária da Baixada de Jacarepaguá situada no estado do Rio de Janeiro através do uso do método GPR (Ground Penetrating Radar). Os numerosos estudos feitos na Baixada de Jacarepaguá, baseados nas curvas de variação do nível do mar em diferentes setores da costa Brasileira (MARTIN et al. 1985) e datações ao radiocarbono contribuíram na elaboração de um modelo evolutivo no Pleistoceno e no Holoceno. Esse modelo mostra em primeiro lugar episódios transgressivos em 7000-5100 anos BP, 3900-3600 anos BP e 2700-2500 anos BP e episódios regressivos a 5100-3900 anos BP, 3600-2700 anos BP e depois de 2500 anos BP. Esses episódios de variações do nível relativo do mar tiveram por consequência a constante evolução da Baixada de Jacarepaguá do estado de ilha-barreira com uma e depois duas barreiras (interna e externa), fruto da inundação da planície por invasão marinha em episódios transgressivos, a um estado de planície costeira emersa em episódios regressivos com barreira progradante direção ao mar e processos erosivos associados. Esse modelo evolutivo não inclui dados processados obtidos com o GPR, método que permite por impulsos eletromagnéticos de alta freqüência gerar um perfil de refletores baseado nas descontinuidades elétricas na subsuperficie. Os perfis levantados e processados nesse trabalho permitiram confirmar esse modelo evolutivo, mostrando uma sucessão de migração do perfil de praia e geometria sedimentar associada em resposta as numerosas variações eustática local.

Assessment and monitoring of marine debris in Gray's Reef National Marine Sanctuary

Gray’s Reef National Marine Sanctuary (GRNMS) is located 32.4 km offshore of Sapelo Island, Georgia. The ecological importance of this area is related to the transition between tropical and temperate waters, and the existence of a topographically complex system of ledges. Due to its central location, GRNMS can be used as a focal site to study the accumulation and impacts of marine debris on the Atlantic continental shelf offshore of the Southeast United States. Previously, researchers characterized marine debris in GRNMS and reported that incidence of the debris at the limited densely colonized ledge sites was significantly greater than at sand or sparsely colonized live bottom, and is further influenced by the level of boating activity and physiographic characteristics (e.g., ledge height). Information gleaned from the initial marine debris characterization was used to devise a strategy for prioritizing cleanup and monitoring efforts. However, a significant gap in knowledge was the rate of debris accumulation. The primary objective of this study was to select, mark, and perform initial marine debris surveys at permanent monitoring sites within GRNMS to quantify long-term trends in types, abundance, impacts, and accumulation rates of debris. Ledge sites were selected to compare types, abundance, and accumulation rates of marine debris between a) areas of high and low use and b) short and tall ledges. Nine permanent monitoring sites were marked and initially surveyed in 2007/2008. Surveys were conducted within a 50 x 4 m transect for a total survey area of 200 square meters. All debris was removed and detailed information was taken on the types of debris, quantity, and associations with benthic fauna. Information on associations with benthic fauna included degree of entanglement, type of organism with which it is entangled or resting on, degree of fouling, and visible impacts such as tissue abrasions. Sites were re-surveyed approximately one year later to quantify new accumulation. During the initial survey, a total of ten debris items, totaling 16.3 kg in weight, were removed from two monitoring stations, both “tall” sites within the area of high boat use. Year-one accumulation totaled five items and approximately 7 kg in weight. Similar to the initial survey, all debris was found at sites in the area of high boat use. However, in contrast to the initial survey, two of these items were found on medium-height ledges. Removed items included fishing line, leaders, rope, plastic, and fabric. Although items were often encrusted in benthic biota or entangled on the ledge, impacts such as abrasions or other injuries were not observed. During the 2009 monitoring efforts, volunteer divers were trained to conduct the survey. Monitoring protocols were documented for GRNMS staff and included as an appendix of this report to enable long-term monitoring of sites. Additionally, national reconnaissance data (e.g. satellite, radar, aerial surveys) and other information on known fishing locations were examined for patterns of resource use and correlations with debris occurrence patterns. A previous model predicting the density of marine debris based on ledge features and boat use was refined and the results were used to generate a map of predicted debris density for all ledges.

Polarisation diversity of conformal arrays based on geometric algebra via convex optimisation

A simple and general design procedure is presented for the polarisation diversity of arbitrary conformal arrays; this procedure is based on the mathematical framework of geometric algebra and can be solved optimally using convex optimisation. Aside from being simpler and more direct than other derivations in the literature, this derivation is also entirely general in that it expresses the transformations in terms of rotors in geometric algebra which can easily be formulated for any arbitrary conformal array geometry. Convex optimisation has a number of advantages; solvers are widespread and freely available, the process generally requires a small number of iterations and a wide variety of constraints can be readily incorporated. The study outlines a two-step approach for addressing polarisation diversity in arbitrary conformal arrays: first, the authors obtain the array polarisation patterns using geometric algebra and secondly use a convex optimisation approach to find the optimal weights for the polarisation diversity problem. The versatility of this approach is illustrated via simulations of a 7×10 cylindrical conformal array. © 2012 The Institution of Engineering and Technology.

Framework for integration of informal waste management sector with the formal sector in Pakistan.

Historically, waste pickers around the globe have utilised urban solid waste as a principal source of livelihood. Formal waste management sectors usually perceive the informal waste collection/recycling networks as backward, unhygienic and generally incompatible with modern waste management systems. It is proposed here that through careful planning and administration, these seemingly troublesome informal networks can be integrated into formal waste management systems in developing countries, providing mutual benefits. A theoretical framework for integration based on a case study in Lahore, Pakistan, is presented. The proposed solution suggests that the municipal authority should draw up and agree on a formal work contract with the group of waste pickers already operating in the area. The proposed system is assessed using the integration radar framework to classify and analyse possible intervention points between the sectors. The integration of the informal waste workers with the formal waste management sector is not a one dimensional or single step process. An ideal solution might aim for a balanced focus on all four categories of intervention, although this may be influenced by local conditions. Not all the positive benefits will be immediately apparent, but it is expected that as the acceptance of such projects increases over time, the informal recycling economy will financially supplement the formal system in many ways.

Framework for integration of informal waste management sector with the formal sector in Pakistan

Historically, waste pickers around the globe have utilised urban solid waste as a principal source of livelihood. Formal waste management sectors usually perceive the informal waste collection/recycling networks as backward, unhygienic and generally incompatible with modern waste management systems. It is proposed here that through careful planning and administration, these seemingly troublesome informal networks can be integrated into formal waste management systems in developing countries, providing mutual benefits. A theoretical framework for integration based on a case study in Lahore, Pakistan, is presented. The proposed solution suggests that the municipal authority should draw up and agree on a formal work contract with the group of waste pickers already operating in the area. The proposed system is assessed using the integration radar framework to classify and analyse possible intervention points between the sectors. The integration of the informal waste workers with the formal waste management sector is not a one dimensional or single step process. An ideal solution might aim for a balanced focus on all four categories of intervention, although this may be influenced by local conditions. Not all the positive benefits will be immediately apparent, but it is expected that as the acceptance of such projects increases over time, the informal recycling economy will financially supplement the formal system in many ways. © The Author(s) 2013.

Wavelength Coded Optical Time-Domain Reflectometry

This paper presents a wavelength coded optical timedomain reflectometry based on optical heterodyne technique. In this scheme, the probe and reference optical pulses have different wavelengths. This enables optical heterodyne detection to be used to improve the system performances significantly. We demonstrate a spatial resolution of 2.5 m within a range of 60 km in weak-reflection signal detection and direct observation of Brillouin scattering over a long optical fiber, suggesting online fiber sensing possible. The principle of wavelength coding is applicable to other systems like lidar and radar to increase receiver sensitivity and simplify system structure.

Intelligent control of avalanched photodiode to get optimal state

To improve the sensitivity of our laser radar system, we provided a set of control method for APDs (Avalanched Photodiodes) based on single-chip computer together with the circuits dealing with noise and temperature. It adjusts the voltages intelligently and maintains the APD's optimal working status.