Water Quality and Wet Season Diatom Assemblage Characteristics from the Tamiami Trail Pilot Swales Sites (Everglades National Park, Florida, USA)

A pivotal component of hydrological restoration of the Florida Everglades is the improvement of water conveyance to Everglades National Park by the degradation of the current network of canals, roadways and levees. The Tamiami Trail (L29) road/canal complex represents a major barrier to natural water flows into the park and a variety of modification options for flow improvement are currently being explored, including the installation of spreader swales immediately downstream of culverts conveying water under Tamiami Trail from the L29 canal into Everglades National Park. In this study, we evaluated water column chemistry and wet-season diatom community structure to provide baseline information for use in future monitoring activities related to the proposed Tamiami Trail modifications. Water chemistry showed pronounced fluctuations in response to precipitation and anthropogenically mediated hydrological events. Differences in water quality variables among sites were dampened during periods of inundation, and became more pronounced during periods of low canal stage, suggesting the importance of small-scale mechanisms related to isolation of habitat patches. Diatom assemblages were unexpectedly speciose (127 taxa in 40 samples) compared to typical Everglades assemblages, and spatially heterogeneous in sites associated with concentric areas of dense vegetation immediately downstream of culverts. We also observed significant compositional dissimilarities among transects, indicating that culvert pool and north transect assemblages were substantially influenced by propagule input from the canal and areas to the north, while south transect sites were compositionally similar to typical sawgrass prairie diatom communities. Central transect sites were compositionally intermediate to their north and south counterparts. We propose that the position and spatial extent of this “transitional assemblage” is a sensitive indicator of subtle environmental change related to Tamiami Trail modifications.

The Effect of Carbohydrate Amount, Quality and Type on Arterial Pulse Pressure in Cuban-Americans with and Without Type 2 Diabetes

Background: Arterial pulse pressure, the difference between systolic and diastolic blood pressure, has been used as an indicator (surrogate measure) of arterial stiffness. High arterial pulse pressure (> 40) has been associated with increased cardiovascular disease and mortality. Several clinical trials have reported that the proportion of calories from carbohydrate has an effect on blood pressure. The primary objective of this study was to assess arterial pulse pressure and its association with carbohydrate quantity and quality (glycemic load) with diabetes status for a Cuban American population. Methods: A single point analysis included 367 participants. There was complete data for 365 (190 with and 175 without type 2 diabetes). The study was conducted in the investigator’s laboratory located in Miami, Florida. Demographic, dietary, anthropometric and laboratory data were collected. Arterial pulse pressure was calculated by the formula systolic minus the diastolic blood pressure. Glycemic load, fructose, sucrose, percent of average daily calories from carbohydrate, fat and protein, grams of fiber and micronutrient intakes were calculated from a validated food frequency questionnaire. Results: The mean arterial pulse pressure was significantly higher in participants with (52.9 ± 12.4) than without (48.6 ± 13.4) type 2 diabetes. The odds of persons with diabetes having high arterial pulse pressure (>40) was 1.85 (95% CI =1.09, 3.13); p=0.023. For persons with type 2 diabetes higher glycemic load was associated with lower arterial pulse pressure. Conclusions: Arterial pulse pressure and diet are modifiable risk factors of cardiovascular disease. Arterial pulse pressure may be associated with carbohydrate intake differently considering diabetes status. Results may be due to individuals with diabetes following dietary recommendations. The findings of this study suggest clinicians take into consideration how medical condition, ethnicity and diet are associated with arterial pulse pressure before developing a medical nutrition therapy plan in collaboration with the client.

Parent involvement on school advisory councils: a process evaluation at the middle school level

Increasing parental involvement was made an important goal for all Florida schools in educational reform legislation in the 1990's. A forum for this input was established and became known as the School Advisory Council (SAC). To demonstrate the importance of process and inclusion, a south Florida school district and its local teacher's union agreed on the following five goals for SACs: (a) to foster an environment of professional collaboration among all stakeholders, (b) to assist in the preparation and evaluation of the school improvement plan, (c) to address all state and district goals, (d) to serve as the avenue for authentic and representative input from all stakeholders, and (e) to ensure the continued existence of the consensus-building process on all issues related to the school's instructional program. The purpose of this study was to determine to what extent and in what ways the parent members of one south Florida middle school's SAC achieved the five district goals during its first three years of implementation. The primary participants were 16 parents who served as members of the SAC, while 16 non-parent members provided perspective on parent involvement as "outside sources." Being qualitative by design, factors such as school climate, leadership styles, and the quality of parental input were described from data collected from four sources: parent interviews, a questionnaire of non-parents, researcher observations, and relevant documents. A cross-case analysis of all data informed a process evaluation that described the similarities and differences of intended and observed outcomes of parent involvement from each source using Stake's descriptive matrix model. A formative evaluation of the process compared the observed outcomes with standards set for successful SACs, such as the district's five goals. The findings indicated that parents elected to the SACs did not meet the intended goals set by the state and district. The school leadership did not foster an environment of professional collaboration and authentic decision-making for parents and other stakeholders. The overall process did not include consensus-building, and there was little if any input by parents on school improvement and other important issues relating to the instructional program. Only two parents gave the SAC a successful rating for involving parents in the decision-making process. Although compliance was met in many of the procedural transactions of the SAC, the reactions of parents to their perceived role and influence often reflected feelings of powerlessness and frustration with a process that many thought lacked meaningfulness and productivity. Two conclusions made from this study are as follows: (a) that the role of the principal in the collaborative process is pivotal, and (b) that the normative-re-educative approach to change would be most appropriate for SACs.

Does a mandibular RDP and new maxillary CD improve masticatory efficiency and quality of life in patients with a mandibular Kennedy class I arch?

Objectives To evaluate the change in masticatory efficiency and quality of life of patients treated with mandibular Kennedy class I removable partial dentures (RPDs) and maxillary complete dentures at the Department of Dentistry of the Federal University of Rio Grande do Norte. Materials and methods A total of 33 Kennedy class I patients were rehabilitated with maxillary complete dentures, and mandibular RPDs were selected for this non-randomized prospective intervention study. The patients had a mean age of 59.1 years. Masticatory efficiency was evaluated by colorimetric assay using fuchsin capsules. The measurements were conducted at baseline and 2 and 6 months after prosthesis insertion. Quality of life was evaluated using the Oral Health Impact Profile (OHIP-14) at baseline and 6 months after denture insertion. The Kolmogorov-Smirnov normality test was applied. Masticatory efficiency was evaluated by repeated measures ANOVA. Oral health-related quality of life was compared using the paired t test. Results There was no statistically significant difference in masticatory efficiency after denture insertion (p = 0.101). Significant differences were found (p = 0.010) for oral health-related quality of life. A significant improvement in psychological discomfort (p < 0.01) and psychological disability (p < 0.01) was observed. Mean difference value (95 % confidence interval) was 6.8 (3.8 to 9.7) points, reflecting a low impact of oral health on quality of life, considering the 0–56 range of variation of the OHIP-14 and a Cohen’s d of 1.13. Conclusion According to the results of the present study, rehabilitation with Kennedy class I RPDs and complete dentures did not influence masticatory efficiency but improved oral health-related quality of life. Clinical relevance The association between the patient’s quality of life and the masticatory efficiency is important for treatment predictability.

Émergence et développement de l’oncologie au Québec : collaboration, compétition et défis organisationnels, 1900-2005

Objectifs : le principal objectif de notre projet doctoral consiste à mettre en relief les transformations qui ont marqué le développement de l’oncologie et de la lutte contre le cancer au Québec au 20e siècle. Pour ce faire, nous nous sommes penchées sur trois niveaux d’analyse : 1) le niveau micro aborde l’organisation des services médicaux au sein d’une organisation hospitalière, soit l’Hôtel-Dieu de Québec. 2) Le niveau méso analyse une lutte professionnelle, soit la lutte entre les hématologues et les oncologues médicaux pour la reconnaissance de l’oncologie médicale. 3) Le niveau macro s’intéresse à l’organisation de la lutte contre le cancer à travers la province de Québec et aux différents modèles organisationnels créés. Principale hypothèse : l’émergence et la transformation de l’oncologie et de la lutte contre le cancer ont été influencées des rapports de collaboration et de compétition entre les acteurs impliqués en oncologie. En effet, il apparaît que ce champ se trouve en tension entre l’obligation de collaborer pour offrir des services de qualité aux patients et les dynamiques professionnelles et/ou organisationnelles. Cadre théorique : un cadre théorique a été développé pour chacun des niveaux d’analyse. Le niveau micro s’inspire des travaux de Frickel, Abbott et Strauss et s’intéresse plus particulièrement aux négociations entourant l’ordre social au sein d’un hôpital universitaire; le niveau méso emploie les travaux de Bourdieu et Abbott pour analyser la lutte entre deux spécialités médicales pour le contrôle des agents de chimiothérapie; et le niveau macro, de la sociologie des organisations et de la théorie néo-institutionnaliste pour mettre en relief l’émergence et la transformation de la lutte contre le cancer au Québec au 20e siècle. Méthodologie : l’approche de l’étude de cas a été adoptée et chaque niveau d’analyse constitue une étude de cas à part entière. Le corpus de données se compose de données archivistiques recueillies dans 10 centres d’archives canadiens, et de données d’entrevues. Une soixantaine d’entrevues avec des oncologues, des professionnels de la santé, des gestionnaires, des chercheurs et des fonctionnaires ont été réalisées. Conclusion : les différents niveaux d’analyse offrent différentes contributions qui leurs sont propres, mais l’ensemble de la thèse tend à mettre en relief la complexité du changement organisationnel à travers un perpétuel processus de définition et de redéfinition des frontières professionnelles et des organisations en raison du développement des connaissances scientifiques, des technologies, des expertises professionnelles et de l’environnement social, politique et économique.

Validation of the English version of the Scale for Psychosocial Factors in Food Allergy and the relationship with mental health, quality of life, and self-efficacy

Background. The Scale for Psychosocial Factors in Food Allergy (SPS-FA) is based on the biopsychosocial model of health and was developed and validated in Chile to measure the interaction between psychological variables and allergy symptoms in the child. We sought to validate this scale in an English speaking population and explore its relationship with parental quality of life, self-efficacy, and mental health. Methods. Parents (n = 434) from the general population in the UK, who had a child with a clinical diagnosis of food allergy, completed the SPS-FA and validated scales on food allergy specific parental quality of life (QoL), parental self-efficacy, and general mental health. Findings. The SPS-FA had good internal consistency (alphas = .61-.86). Higher scores on the SPS-FA significantly correlated with poorer parental QoL, self-efficacy, and mental health. All predictors explained 57% of the variance in SPS-FA scores with QoL as the biggest predictor (β = .52). Discussion. The SPS-FA is a valid scale for use in the UK and provides a holistic view of the impact of food allergy on the family. In conjunction with health-related QoL measures, it can be used by health care practitioners to target care for patients and evaluate psychological interventions for improvement of food allergy management.

Advanced Techniques for Image Quality Assessment of Modern X-ray Computed Tomography Systems

X-ray computed tomography (CT) imaging constitutes one of the most widely used diagnostic tools in radiology today with nearly 85 million CT examinations performed in the U.S in 2011. CT imparts a relatively high amount of radiation dose to the patient compared to other x-ray imaging modalities and as a result of this fact, coupled with its popularity, CT is currently the single largest source of medical radiation exposure to the U.S. population. For this reason, there is a critical need to optimize CT examinations such that the dose is minimized while the quality of the CT images is not degraded. This optimization can be difficult to achieve due to the relationship between dose and image quality. All things being held equal, reducing the dose degrades image quality and can impact the diagnostic value of the CT examination.

A recent push from the medical and scientific community towards using lower doses has spawned new dose reduction technologies such as automatic exposure control (i.e., tube current modulation) and iterative reconstruction algorithms. In theory, these technologies could allow for scanning at reduced doses while maintaining the image quality of the exam at an acceptable level. Therefore, there is a scientific need to establish the dose reduction potential of these new technologies in an objective and rigorous manner. Establishing these dose reduction potentials requires precise and clinically relevant metrics of CT image quality, as well as practical and efficient methodologies to measure such metrics on real CT systems. The currently established methodologies for assessing CT image quality are not appropriate to assess modern CT scanners that have implemented those aforementioned dose reduction technologies.

Thus the purpose of this doctoral project was to develop, assess, and implement new phantoms, image quality metrics, analysis techniques, and modeling tools that are appropriate for image quality assessment of modern clinical CT systems. The project developed image quality assessment methods in the context of three distinct paradigms, (a) uniform phantoms, (b) textured phantoms, and (c) clinical images.

The work in this dissertation used the “task-based” definition of image quality. That is, image quality was broadly defined as the effectiveness by which an image can be used for its intended task. Under this definition, any assessment of image quality requires three components: (1) A well defined imaging task (e.g., detection of subtle lesions), (2) an “observer” to perform the task (e.g., a radiologists or a detection algorithm), and (3) a way to measure the observer’s performance in completing the task at hand (e.g., detection sensitivity/specificity).

First, this task-based image quality paradigm was implemented using a novel multi-sized phantom platform (with uniform background) developed specifically to assess modern CT systems (Mercury Phantom, v3.0, Duke University). A comprehensive evaluation was performed on a state-of-the-art CT system (SOMATOM Definition Force, Siemens Healthcare) in terms of noise, resolution, and detectability as a function of patient size, dose, tube energy (i.e., kVp), automatic exposure control, and reconstruction algorithm (i.e., Filtered Back-Projection– FPB vs Advanced Modeled Iterative Reconstruction– ADMIRE). A mathematical observer model (i.e., computer detection algorithm) was implemented and used as the basis of image quality comparisons. It was found that image quality increased with increasing dose and decreasing phantom size. The CT system exhibited nonlinear noise and resolution properties, especially at very low-doses, large phantom sizes, and for low-contrast objects. Objective image quality metrics generally increased with increasing dose and ADMIRE strength, and with decreasing phantom size. The ADMIRE algorithm could offer comparable image quality at reduced doses or improved image quality at the same dose (increase in detectability index by up to 163% depending on iterative strength). The use of automatic exposure control resulted in more consistent image quality with changing phantom size.

Based on those results, the dose reduction potential of ADMIRE was further assessed specifically for the task of detecting small (<=6 mm) low-contrast (<=20 HU) lesions. A new low-contrast detectability phantom (with uniform background) was designed and fabricated using a multi-material 3D printer. The phantom was imaged at multiple dose levels and images were reconstructed with FBP and ADMIRE. Human perception experiments were performed to measure the detection accuracy from FBP and ADMIRE images. It was found that ADMIRE had equivalent performance to FBP at 56% less dose.

Using the same image data as the previous study, a number of different mathematical observer models were implemented to assess which models would result in image quality metrics that best correlated with human detection performance. The models included naïve simple metrics of image quality such as contrast-to-noise ratio (CNR) and more sophisticated observer models such as the non-prewhitening matched filter observer model family and the channelized Hotelling observer model family. It was found that non-prewhitening matched filter observers and the channelized Hotelling observers both correlated strongly with human performance. Conversely, CNR was found to not correlate strongly with human performance, especially when comparing different reconstruction algorithms.

The uniform background phantoms used in the previous studies provided a good first-order approximation of image quality. However, due to their simplicity and due to the complexity of iterative reconstruction algorithms, it is possible that such phantoms are not fully adequate to assess the clinical impact of iterative algorithms because patient images obviously do not have smooth uniform backgrounds. To test this hypothesis, two textured phantoms (classified as gross texture and fine texture) and a uniform phantom of similar size were built and imaged on a SOMATOM Flash scanner (Siemens Healthcare). Images were reconstructed using FBP and a Sinogram Affirmed Iterative Reconstruction (SAFIRE). Using an image subtraction technique, quantum noise was measured in all images of each phantom. It was found that in FBP, the noise was independent of the background (textured vs uniform). However, for SAFIRE, noise increased by up to 44% in the textured phantoms compared to the uniform phantom. As a result, the noise reduction from SAFIRE was found to be up to 66% in the uniform phantom but as low as 29% in the textured phantoms. Based on this result, it clear that further investigation was needed into to understand the impact that background texture has on image quality when iterative reconstruction algorithms are used.

To further investigate this phenomenon with more realistic textures, two anthropomorphic textured phantoms were designed to mimic lung vasculature and fatty soft tissue texture. The phantoms (along with a corresponding uniform phantom) were fabricated with a multi-material 3D printer and imaged on the SOMATOM Flash scanner. Scans were repeated a total of 50 times in order to get ensemble statistics of the noise. A novel method of estimating the noise power spectrum (NPS) from irregularly shaped ROIs was developed. It was found that SAFIRE images had highly locally non-stationary noise patterns with pixels near edges having higher noise than pixels in more uniform regions. Compared to FBP, SAFIRE images had 60% less noise on average in uniform regions for edge pixels, noise was between 20% higher and 40% lower. The noise texture (i.e., NPS) was also highly dependent on the background texture for SAFIRE. Therefore, it was concluded that quantum noise properties in the uniform phantoms are not representative of those in patients for iterative reconstruction algorithms and texture should be considered when assessing image quality of iterative algorithms.

The move beyond just assessing noise properties in textured phantoms towards assessing detectability, a series of new phantoms were designed specifically to measure low-contrast detectability in the presence of background texture. The textures used were optimized to match the texture in the liver regions actual patient CT images using a genetic algorithm. The so called “Clustured Lumpy Background” texture synthesis framework was used to generate the modeled texture. Three textured phantoms and a corresponding uniform phantom were fabricated with a multi-material 3D printer and imaged on the SOMATOM Flash scanner. Images were reconstructed with FBP and SAFIRE and analyzed using a multi-slice channelized Hotelling observer to measure detectability and the dose reduction potential of SAFIRE based on the uniform and textured phantoms. It was found that at the same dose, the improvement in detectability from SAFIRE (compared to FBP) was higher when measured in a uniform phantom compared to textured phantoms.

The final trajectory of this project aimed at developing methods to mathematically model lesions, as a means to help assess image quality directly from patient images. The mathematical modeling framework is first presented. The models describe a lesion’s morphology in terms of size, shape, contrast, and edge profile as an analytical equation. The models can be voxelized and inserted into patient images to create so-called “hybrid” images. These hybrid images can then be used to assess detectability or estimability with the advantage that the ground truth of the lesion morphology and location is known exactly. Based on this framework, a series of liver lesions, lung nodules, and kidney stones were modeled based on images of real lesions. The lesion models were virtually inserted into patient images to create a database of hybrid images to go along with the original database of real lesion images. ROI images from each database were assessed by radiologists in a blinded fashion to determine the realism of the hybrid images. It was found that the radiologists could not readily distinguish between real and virtual lesion images (area under the ROC curve was 0.55). This study provided evidence that the proposed mathematical lesion modeling framework could produce reasonably realistic lesion images.

Based on that result, two studies were conducted which demonstrated the utility of the lesion models. The first study used the modeling framework as a measurement tool to determine how dose and reconstruction algorithm affected the quantitative analysis of liver lesions, lung nodules, and renal stones in terms of their size, shape, attenuation, edge profile, and texture features. The same database of real lesion images used in the previous study was used for this study. That database contained images of the same patient at 2 dose levels (50% and 100%) along with 3 reconstruction algorithms from a GE 750HD CT system (GE Healthcare). The algorithms in question were FBP, Adaptive Statistical Iterative Reconstruction (ASiR), and Model-Based Iterative Reconstruction (MBIR). A total of 23 quantitative features were extracted from the lesions under each condition. It was found that both dose and reconstruction algorithm had a statistically significant effect on the feature measurements. In particular, radiation dose affected five, three, and four of the 23 features (related to lesion size, conspicuity, and pixel-value distribution) for liver lesions, lung nodules, and renal stones, respectively. MBIR significantly affected 9, 11, and 15 of the 23 features (including size, attenuation, and texture features) for liver lesions, lung nodules, and renal stones, respectively. Lesion texture was not significantly affected by radiation dose.

The second study demonstrating the utility of the lesion modeling framework focused on assessing detectability of very low-contrast liver lesions in abdominal imaging. Specifically, detectability was assessed as a function of dose and reconstruction algorithm. As part of a parallel clinical trial, images from 21 patients were collected at 6 dose levels per patient on a SOMATOM Flash scanner. Subtle liver lesion models (contrast = -15 HU) were inserted into the raw projection data from the patient scans. The projections were then reconstructed with FBP and SAFIRE (strength 5). Also, lesion-less images were reconstructed. Noise, contrast, CNR, and detectability index of an observer model (non-prewhitening matched filter) were assessed. It was found that SAFIRE reduced noise by 52%, reduced contrast by 12%, increased CNR by 87%. and increased detectability index by 65% compared to FBP. Further, a 2AFC human perception experiment was performed to assess the dose reduction potential of SAFIRE, which was found to be 22% compared to the standard of care dose.

In conclusion, this dissertation provides to the scientific community a series of new methodologies, phantoms, analysis techniques, and modeling tools that can be used to rigorously assess image quality from modern CT systems. Specifically, methods to properly evaluate iterative reconstruction have been developed and are expected to aid in the safe clinical implementation of dose reduction technologies.

A Preliminary Case Study for Collaborative Quality Enhancement

Eight universities have collaborated in an Erasmus+ funded project to create a lean process to enhance self-evaluation and accreditation through peer alliance and cooperation. Central to this process is the partnering of two institutions as critical friends, based on prior selfevaluations of specific programmes to identify particular criteria for improvement. A pairing algorithm matches two institutions based on their respective self-evaluation scores. It ensures there are significant differences in key criteria that are mutually beneficial for future programme development and enhancement. The ensuing meetings between critical friends have been designated as ‘cross-sparring’. This paper focuses on a case-study of the crosssparring and resulting enhancement outcomes between Umeå University and Queen’s University Belfast, and their respective Masters programmes in Software Engineering and Mechanical Engineering. The collaborative experiences of the process are evaluated, reported, discussed and conclusions provided on the efficacy of this particular application of cross-sparring.

Exercise rehabilitation following intensive care unit discharge for recovery from critical illness: Executive summary of a Cochrane Collaboration systematic review

Skeletal muscle wasting and weakness are major complications of critical illness and underlie the profound physical and functional impairments experienced by survivors after discharge from the intensive care unit (ICU). Exercise-based rehabilitation has been shown to be beneficial when delivered during ICU admission. This review aimed to determine the effectiveness of exercise rehabilitation initiated after ICU discharge on primary outcomes of functional exercise capacity and health-related quality of life. We sought randomized controlled trials, quasi-randomized controlled trials, and controlled clinical trials comparing an exercise intervention commenced after ICU discharge vs. any other intervention or a control or ‘usual care’ programme in adult survivors of critical illness. Cochrane Central Register of Controlled Trials, Medical Literature Analysis and Retrieval System Online (MEDLINE), Excerpta Medica Database, and Cumulative Index to Nursing and Allied Health Literature databases were searched up to February 2015. Dual, independent screening of results, data extraction, and quality appraisal were performed. We included six trials involving 483 patients. Overall quality of evidence for both outcomes was very low. All studies evaluated functional exercise capacity, with three reporting positive effects in favour of the intervention. Only two studies evaluated health-related quality of life and neither reported differences between intervention and control groups. Meta-analyses of data were precluded due to variation in study design, types of interventions, and selection and reporting of outcome measurements. We were unable to determine an overall effect on functional exercise capacity or health-related quality of life of interventions initiated after ICU discharge for survivors of critical illness. Findings from ongoing studies are awaited. Future studies need to address methodological aspects of study design and conduct to enhance rigour, quality, and synthesis.

Patient-reported quality-of-life analysis of radium-223 dichloride from the phase III ALSYMPCA study

BACKGROUND: Radium-223 dichloride (radium-223), a first-in-class α-emitting radiopharmaceutical, is recommended in both pre- and post-docetaxel settings in patients with castration-resistant prostate cancer (CRPC) and symptomatic bone metastases based on overall survival benefit demonstrated in the phase III ALSYMPCA study. ALSYMPCA included prospective measurements of health-related quality of life (QOL) using two validated instruments: the general EuroQoL 5D (EQ-5D) and the disease-specific Functional Assessment of Cancer Therapy-Prostate (FACT-P).

PATIENTS AND METHODS: Analyses were conducted to determine treatment effects of radium-223 plus standard of care (SOC) versus placebo plus SOC on QOL using FACT-P and EQ-5D. Outcomes assessed were percentage of patients experiencing improvement, percentage of patients experiencing worsening, and mean QOL scores during the study.

RESULTS: Analyses were carried out on the intent-to-treat population of patients randomized to receive radium-223 (n = 614) or placebo (n = 307). The mean baseline EQ-5D utility and FACT-P total scores were similar between treatment groups. A significantly higher percentage of patients receiving radium-223 experienced meaningful improvement in EQ-5D utility score on treatment versus placebo {29.2% versus 18.5%, respectively; P = 0.004; odds ratio (OR) = 1.82 [95% confidence interval (CI) 1.21-2.74]}. Findings were similar for FACT-P total score [24.6% versus 16.1%, respectively; P = 0.020; OR = 1.70 (95% CI 1.08-2.65)]. A lower percentage of patients receiving radium-223 experienced meaningful worsening versus placebo measured by EQ-5D utility score and FACT-P total score. Prior docetaxel use and current bisphosphonate use did not affect these findings. Treatment was a significant predictor of EQ-5D utility score, with radium-223 associated with higher scores versus placebo (0.56 versus 0.50, respectively; P = 0.002). Findings were similar for FACT-P total score (99.08 versus 95.22, respectively; P = 0.004).

CONCLUSIONS: QOL data from ALSYMPCA demonstrated that improved survival with radium-223 is accompanied by significant QOL benefits, including a higher percentage of patients with meaningful QOL improvement and a slower decline in QOL over time in patients with CRPC.

Does Inappropriate Quality Control Demotivate Workers

The construction industry requires quality control and regulation of its contingent,unpredictable environment. However, taking too much control from workers candisempower and demotivate. In the 1970s Deci and Ryan developed selfdeterminationtheory which states that in order to be intrinsically motivated, threecomponents are necessary - competence, autonomy and relatedness. This study aimsto examine the way in which the three ‘nutriments’ for intrinsic motivation may beundermined by heavy-handed quality control. A critical literature review analysesconstruction, psychological and management research regarding the control andmotivation of workers, using self-determination theory as a framework. Initialfindings show that quality management systems do not always work as designed.Workers perceive that unnecessary, wasteful and tedious counter checking of theirwork implies that they are not fully trusted by management to work without oversight.Control of workers and pressure for continual improvement may lead to resistanceand deception. Controlling mechanisms can break the link between performance andsatisfaction, reducing motivation and paradoxically reducing the likelihood of thequality they intend to promote. This study will lead to a greater understanding ofcontrol and motivation, facilitating further research into improvements in theapplication of quality control to maintain employee motivation.

E-Government Collaboration in the Swedish Public Sector : Multiple Studies on Collaboration Facilitators and Collaboration Modes

Collaboration in the public sector is imperative to achieve e-government objectives such as improved efficiency and effectiveness of public administration and improved quality of public services. Collaboration across organizational and institutional boundaries requires public organizations to share e-government systems and services through for instance, interoperable information technology and processes. Demands on public organizations to become more open also require that public organizations adopt new collaborative approaches for inviting and engaging citizens in governmental activities. E-government related collaboration in the public sector is challenging, however, and collaboration initiatives often fail. Public organizations need to learn how to collaborate since forms of e-government collaboration and expected outcomes are mostly unknown. How public organizations can collaborate and the expected outcomes are thus investigated in this thesis by studying multiple collaboration cases on the acquisition and implementation of a particular e-government investment (digital archive). This thesis also investigates how e-government collaboration can be facilitated through artifacts. It is done through a case study, where objects that cross boundaries between collaborating communities in the public sector are studied, and by designing a configurable process model integrating several processes for social services. By using design science, this thesis also investigates how an m-government solution that facilitates collaboration between citizens and public organizations can be designed. The thesis contributes to literature through describing five different modes of interorganizational collaboration in the public sector and the expected benefits from each mode. It also contributes with an instantiation of a configurable process model supporting three open social e-services and with evidence of how it can facilitate collaboration. This thesis further describes how boundary objects facilitate collaboration between different communities in an open government design initiative. It contributes with a designed mobile government solution, thereby providing proof of concept and initial design implications for enabling collaboration with citizens through citizen sourcing (outsourcing a governmental activity to citizens through an open call). This thesis also identifies research streams within e-government collaboration research through a literature review and the thesis contributions are related to the identified research streams. This thesis gives directions for future research by suggesting that future research should focus further on understanding e-government collaboration and how information and communication technology can facilitate collaboration in the public sector. It is suggested that further research should investigate m-government solutions to form design theories. Future research should also examine how value can be co-created in e-government collaboration.

A gestão da informação sob a luz do Enterprise Content Management (ECM): um estudo de caso em uma universidade pública

This work involves the organization and content perspectives on Enterprise Content Management (ECM) framework. The case study at the Federal University of Rio Grande do Norte was based on ECM model to analyse the information management provided by the three main administrative systems: The Integrated Management of Academic Activities (SIGAA), Integrated System of Inheritance, and Contracts Administration (SIPAC) and the Integrated System for Administration and Human Resources (SIGRH). A case study protocol was designed to provide greater reliability to research process. Four propositions were examined in order to reach the specific objectives of identification and evaluation of ECM components from UFRN perspective. The preliminary phase provided the guidelines for the data collection. In total, 75 individuals were interviewed. Interviews with four managers directly involved on systems design were recorded (average duration of 90 minutes). The 70 remaining individuals were approached in random way in UFRN s units, including teachers, administrative-technical employees and students. The results showed the presence of many ECM elements in the management of UFRN administrative information. The technological component with higher presence was "management of web content / collaboration". But initiatives of other components (e.g. email and document management) were found and are in continuous improvement. The assessment made use of eQual 4.0 to examine the effectiveness of applications under three factors: usability, quality of information and offered service. In general, the quality offered by the systems was very good and walk side by side with the obtained benefits of ECM strategy adoption in the context of the whole institution

Interprofessional collaboration in nursing homes (interprof): A grounded theory study of general practitioner experiences and strategies to perform nursing home visits

Background: Interprofessionalism, considered as collaboration between medical professionals, has gained prominence over recent decades and evidence for its impact has grown. The steadily increasing number of residents in nursing homes will challenge medical care and the interaction across professions, especially nurses and general practitioners (GPS). The nursing home visit, a key element of medical care, has been underrepresented in research. This study explores GP perspectives on interprofessional collaboration with a focus on their visits to nursing homes in order to understand their experiences and expectations. This research represents an aspect of the interprof study, which explores medical care needs as well as the perceived collaboration and communication by nursing home residents, their families, GPS and nurses. This paper focusses on GPS' views, investigating in particular their visits to nursing homes in order to understand their experiences. Methods: Open guideline-interviews covering interprofessional collaboration and the visit process were conducted with 30 GPS in three study centers and analyzed with grounded theory methodology. GPS were recruited via postal request and existing networks of the research partners. Results: Four different types of nursing home visits were found: visits on demand, periodical visits, nursing home rounds and ad-hoc-decision based visits. We identified the core category "productive performance" of home visits in nursing homes which stands for the balance of GPŚ individual efforts and rewards. GPS used different strategies to perform a productive home visit: preparing strategies, on-site strategies and investing strategies. Conclusion: We compiled a theory of GPS home visits in nursing homes in Germany. The findings will be useful for research, and scientific and management purposes to generate a deeper understanding of GP perspectives and thereby improve interprofessional collaboration to ensure a high quality of care.

Dry Run Creek Watershed Improvement Project 1248-023: Final Project Report: July 2013-December 2015, October 11, 2016

In 2010 a group of farmers in the Dry Run Creek watershed, an Iowa High Quality Water Resource, formed the Dry Run Creek Watershed Improvement Association to learn more about and implement solutions to remedy a bacteria impairment in their stream. Through a partnership with Luther College, Iowa DNR Watershed Monitoring and Assessment and Iowa State University Extension the farmers were able to conduct an assessment of their stream and watershed. The assessment showed multiple potential sources of bacteria, dependent on whether water samples were collected following rain events or during dry conditions. This project will allow watershed farmers to implement solutions to reduce bacteria delivery during both wet and dry weather. Funding will be targeted to feedlot runoff control improvements, cover crops and vegetative filters, manure management strategies and livestock stream access. The council intends to continue intensive water monitoring to determine whether the strategies are successful. Research shows the bacteria reduction in water bodies can be seen relatively quickly, within 1-2 years, compared to other types of impairments.