Estudo qualiquantitativo do biogás produzido por substratos em biodigestores tipo batelada

Aiming to study the biogas produced by 5 substrates from both quality and quantity point of view, this research was conducted at the Rural Engineering Department of FCAV/UNESP - Brazil, State of São Paulo. The substractes that were used in the anaerobic digestion were characterized as: 1 - Slaughter fowls' manure with napier grass bed (MFNG); 2 - Slaughter fowls' manure with triturate napier grass bed (MFNGT); 3 - Suine manure (SM); 4 - Bovine manure (BM) and 5 - Bovine manure mixed with 50% of sugarcane bagasse (BM50S). From the data collected it was concluded that: the substract (MFNG) and the substract containing SM produced higher and lower volumes of biogas respectively, when compared to the others; the mixture of sugarcane bagasse in the substract containing Bovine manure damages the accumulated biogas production and its quality; 57 days after filling the biodigestors, all substrates produced biogas with a methane level higher than 48% except for the substrates containing Suine manure; the triturate substrates (MFNGT) did not present such distinct characteristics from the non-triturate substrates (MFNG); the quality of biogas at the maximum production stage was similar, for all the studied substrates; the biogas which presented higher quantity of methane in its composition was the one produced with BM, overcoming the value up to 17.7% over the MFNGT production.

Efeitos dos danos mecânicos e fisiológicos na colheita e beneficiamento de sementes de soja

The objective of this study was to evaluate the effect of mechanical damage and physiological events in harvesting and processing of soybean cv. Mosoy RR 8000. The samples were taken during harvest manual, mechanical harvesting and during processing (receipt, pre-cleaning, cleaning, spiral separator, classification and gravity table). The physiological and physical quality was analized through the purity, germination, vigor (first germination count, seedling dry matter, accelerated aging, electrical conductivity, tetrazolium, mechanical damages and seedling field emergence) tests. The statistical design used was a entirely randomized with nine treatments (9 sampling points) with 4 replications, being the means compared by the Tuckey test at 5% probability. In the purity and seedling field emergence were observed highly significative difference between the sampling process, also this differences were obtained the first germination count, seedling dry weight matter, accelerated aging and electrical conductivity which showed smaller results for the mechanical harvesting when compared with the manual harvesting. The germination was obtained differences at 5% for the manual harvesting in relation to the mechanical harvesting were obtained smaller results, being the main cause of reducing the soybean seed quality, when compared with the manual harvesting.

Flutuação populacional de cigarrinhas-das-pastagens na Região Oeste do Paraná

The spittlebugs are considered the most important pests in tropical pastures. The damages caused by these insects decrease the production of pastures. The objective this work was to study the population dynamics of Notozulia entreriana, from June 2007 to June 2008, and the correlation with meteorological and environmental factors (rainfall, temperature, daily solar radiation and pasture height). Therefore, sampled were made in three areas of grassland in the municipality of Marechal Candido Rondon-PR. Sampling of adults and nymphs was made. Also we determined which species of spittlebugs (Hemiptera: Cercopidae) occur in the western region of Parana State. The population fluctuation of N. entreriana showed four peaks during the period of favorable development - spring / summer. The daily solar radiation had a higher correlation with the population. Rainfall, temperature and pasture height had little correlation with the population dynamics. The species that occurred with greater abundance was N. entreriana, representing 88.4% of the total insects collected in western of Parana State.

Stochastic field processes in the mathematical modelling of damped transmission line vibrations

Wind-excited vibrations in the frequency range of 10 to 50 Hz due to vortex shedding often cause fatigue failures in the cables of overhead transmission lines. Damping devices, such as the Stockbridge dampers, have been in use for a long time for supressing these vibrations. The dampers are conveniently modelled by means of their driving point impedance, measured in the lab over the frequency range under consideration. The cables can be modelled as strings with additional small bending stiffness. The main problem in modelling the vibrations does however lay in the aerodynamic forces, which usually are approximated by the forces acting on a rigid cylinder in planar flow. In the present paper, the wind forces are represented by stochastic processes with arbitrary crosscorrelation in space; the case of a Kármán vortex street on a rigid cylinder in planar flow is contained as a limit case in this approach. The authors believe that this new view of the problem may yield useful results, particularly also concerning the reliability of the lines and the probability of fatigue damages. © 1987.

Increased oxygen radical and high-dietary-carbohydrate pancreatic damage.

These data suggest that an improved understanding of the relationship between high dietary carbohydrate and the rate of lipid peroxidation may give some insight into possible treatment modalities for pancreatic damages and may shed light on molecular mechanisms underlying certain pathological processes. High dietary carbohydrate lesions are age related and induced alterations on ceruloplasmin, phospholipids, total proteins, copper and zinc serum levels. Significantly increased serum and pancreatic amylase, and lipoperoxide determinations were observed in 20 month old rats. Cu-Zn superoxide dismutase was decreased in these animals. Daily injection of Cu-Zn superoxide dismutase conjugated with polyethylene glycol (SOD-PEG) prevented the serum and pancreatic changes, indicating that superoxide radical is an important intermediate to high dietary carbohydrate lesion.

Influence of cholecalciferol (Vitamin D3) on the course of experimental systemic lupus erythematosus in F1 (NZBxW) mice

The course of systemic lupus erythematosus (SLE), an autoimmune disease, is markedly affected by hormones such as estrogen and prolactin. It is well known that heavy exposure to sunlight has deleterious effects on SLE, triggering episodes of the disease. Classical explanations for this occurrence suggest that UV radiation damages DNA, which becomes immunogenic, or induces exposure of the Ro antigen in keratinocytes. In recent years, it has been shown that vitamin D3 has important effects on the immune system. Thus, we proposed an alternative hypothesis, suggesting that UV radiation, by promoting vitamin D3 synthesis, could be a factor aggravating the course of SLE after exposure to sunlight. To test this hypothesis, we injected F1(NZBxW) mice, which are prone to developing SLE, with vitamin D3, and we demonstrated a worsening of the histopathological findings in the kidney. (C) 2000 Wiley-Liss, Inc.

Lead zirconate titanate/polyurethane (PZT/PU) composite for acoustic emission sensors

Piezoelectric composite, made from ferroelectric ceramic lead zirconate titanate (PZT) and vegetable based polyurethane (PU) polymer, was doped with a semiconductor filler, graphite. The resulting composite (PZT/C/PU) with 49/1/50- vol. % composition could be poled at lower field and shorter time due to the increased conductivity of the polymer phase following the introduction of graphite. The PZT/C/PU composite showed higher pyroelectric coefficient in comparison with the undoped PZT/PU composite with 50/50-vol. % composition. Also, the PZT/C/PU composite has shown the ability to detect both extensional and flexural modes of simulated acoustic emission (AE) at a distance up to 8.0 m from the source, thus indicating that it may be used for detection of structural damages.

Avaliação do extrato de Momordica charantia em Salmonella typhimurium: Mutagenicidade e antimutagenicidade

In the last years some natural products has been described as supressors of the mutagenic process in bacteria, the antimutagenics. The literature reference that in most of the countries, the population makes use of medicinal plants. The plant Momordica charantia (Cucurbitaceae) is original from Africa being used popularly as purgative, antirheumatic and for skin problems, burns and hemorrhoids. The present work had as objective to evaluate the mutagenic and antimutagenic activities of the ethanolic extract of M. charantia in Salmonella/microsome assays using TA100, TA98 and TA102 strains. It was verified that the extract did not present mutagenic activity when evaluated in different concentrations (0.64, 1.27, 2.55 and 3.84 mg/plate) but acted as antimutagenic agent against the mutations induced by the sodium azide (TA100,-S9), 4-nitro-phenylenediamine (TA98, -S9), daunomycin (TA102, +S9) 2-anthramine (TA100 and TA98, +S9) and 2-aminofluorene (TA102, +S9). When the metabolic activation (+S9) was used, the percentage of inhibition of the mutagenicity varied in the range of 31%-96%, while in absence of metabolizing system (-S9), the maximum percentage of inhibition of the mutagenicity was 44%. In that way, we can conclude that the metabolites found in the extract has potential to protect the genetic material against the damages induced by different chemical agents.

Control of thermal damage in grinding by digital signal processing of raw acoustic emission

Grinding process is usually the last finishing process of a precision component in the manufacturing industries. This process is utilized for manufacturing parts of different materials, so it demands results such as low roughness, dimensional and shape error control, optimum tool-life, with minimum cost and time. Damages on the parts are very expensive since the previous processes and the grinding itself are useless when the part is damaged in this stage. This work aims to investigate the efficiency of digital signal processing tools of acoustic emission signals in order to detect thermal damages in grinding process. To accomplish such a goal, an experimental work was carried out for 15 runs in a surface grinding machine operating with an aluminum oxide grinding wheel and ABNT 1045 e VC131 steels. The acoustic emission signals were acquired from a fixed sensor placed on the workpiece holder. A high sampling rate acquisition system at 2.5 MHz was used to collect the raw acoustic emission instead of root mean square value usually employed. In each test AE data was analyzed off-line, with results compared to inspection of each workpiece for burn and other metallurgical anomaly. A number of statistical signal processing tools have been evaluated.

Little cicada of sugarcane Mahanarva posticata (Homoptera: Cercopidae). A Brazilian agricultural pest. Morpho-histological study of salivary glands

Little cicadas are homopteran insect pests of sugarcane plantations. As these insects suck out the sap from the leaf parenchyma, they inoculate a toxic saliva that damages the plant vessels, thus promoting the loss of glucose by the affected plant. The morphological and histological analyses of the salivary glands of the little cicada Mahanarva posticata, revealed that these glands are formed by 2 portions: one portion comprises a group of acini and has been denominated as the principal gland; the second portion is filamentous in nature and has been denominated as the accessory gland; it is formed by very long and fine filaments. The acinous portion of the gland can be subdivided into 2 lobes: an anterior lobe formed by 3 lobules (I, II, III), and a posterior lobe formed by lobule IV and the excretory duct. Histologically, the salivary glands showed that the filaments are empty sutructures composed by several internal channels with secretion granules being observed in the cytoplasm of the cells of the secretory filaments. Lobules I and II of the principal gland are characterized by being highly basophilic and for accumulating a large amount of secretion in both the cytoplasm of the cells and inside secretion vesicles. Histochemically, we verified that the secretion produced by these glands is lipidic and protein in nature, with the production of polysaccharides being very low. The differences in stain and appearance of the different regions of the salivary gland lead us to believe that the final glandular product is lipoproteic in nature.

Desempenho e morfometria da mucosa de duodeno de frangos de corte alimentados com farelo de canola, durante o período inicial

A trial was carried to verify the effect of increasing levels (0, 10, 20, 30 and 40%) of canola meal in diets of broiler chickens on performance and mucous morphology, during the starting period (1 - 21 days). One thousand 1-d male chicks were assigned to a randomized experimental assay, with five treatments, four replicates and 50 birds per experimental unit. At the 1 st, 21 st and 41 st days, the birds and the rations were weighed. At the 21 st day, two birds of each experimental unit were sacrificed for collection of a duodenum segment to evaluate the intestinal morphometry. The results demonstrated that increasing levels of canola meal resulted in linear reduction on weight gain, weight and feed intake and worst feed conversion. During the growing period (21 to 41 days), when all birds received similar diet, average weight and weight gain decreased, as the canola meal levels increased, while feed conversion and feed intake were similar. Data regarding mucous morphology, submitted to the regression analysis, demonstrated that the crypt depth increased, as the canola meal levels increased. It is possible to include up to 20% of canola meal without damages on broiler performance and digestive tract.

Mango cultivars behavior in relation to fusarium subglutinans

The mango malformation, caused by the fungus Fusarium subglutinans Wollenweb & Reinking, is probably one of the diseases that causes more damages in the mangoes production in Brazil and other producing countries. This fungus was isolated of a Tommy Atkins plant with advanced symptoms of malformation, purified and prepared to be inoculated in 15 cultivars of national and imported mangoes. Initially, 10 cultivars had been inoculated in July/2000: Bourbon IAC - 100, Coração de Boi, Keitt, Parvin, Primor de Amoreira, Sensation, Smith, Surpresa, Tommy Atkins and Van Dyke. Another group was inoculated in December/2000, on the cultivars: Adams, Bhadauran, Palmer, Princesa and Zill, and with others cultivars Primor de Amoreira, Sensation and Tommy Atkins, that were inoculated in the first time, with the purpose to compare the two times of inoculation. Throughout the evaluated data at the two times of inoculation, after 11 months of evaluation, were maden the analysis of the variance in function of the involved sources of variation and the test of Duncan to compare the averages of inoculated cultivars. With the results obtained, the cultivars Bhadauran, Palmer, Parvin, Sensation, Van Dyke and Zill presents less percentage of plants with malformation symptoms or less progression of symptoms in relation to the others inoculated cultivars, under protected environmental conditions, where the assays were carried out.

Electroantennographic responses of Heterotermes tenuis (Isoptera: Rhinotermitidae) to synthetic (3Z,6Z,8E)-Dodecatrien-1-ol

The subterranean termite Heterotermes tenuis (Isoptera: Rhinotermitidae) is a pest of great importance for the Brazilian economy as it causes serious damages in commercial reforestations of Eucalyptus spp. and sugarcane cultures. (3Z,6Z,8E)-Dodecatrien-1-ol has been identified as a pheromone of some species of subterranean termites. The objective of this research was to synthesize (3Z,6Z,8E)-dodecatrien-1-ol and determine by electroantennographic (EAG) bioassays the selectivity and sensitivity of H. tenius antennae to its whole worker extract and to the synthetic triene alcohol.

Production of Ti-35Nb alloy by powder metallurgy for aerospace application

Titanium and its alloys provide high strength-to-weight ratios, good fatigue strength and increased corrosion resistance compared with others materials. Its acceptance in aerospace has been limited by costs considerations such as high cost of raw material, high buy-to-fly ratios and expensive machining operations. Significant cost reductions can be obtained by vacuum sintering and powder metallurgy (P/M) techniques by producing near net shapes and consequently minimizing material waste and machining time. The Ti 35Nb alloy exhibit a low modulus of elasticity. Stemming from the unique combination of high strength, low modulus of elasticity and low density, this alloy is intrinsically more resistant to shock and explosion damages than most other engineering materials. Samples were produced by mixing of initial metallic powders followed by uniaxial and cold isostatic pressing with subsequent densification by sintering between 900 and 1600 °C, in vacuum. Sintering behavior was studied by means of dilatometry. Sintered samples were characterized for phase composition, microstructure and microhardness by X-ray diffraction, scanning electron microscopy and Vickers indentation, respectively. Density was measured by Archimedes method. Copyright © 2004 Society of Automotive Engineers, Inc.

Effects of copper vapor laser radiation on the root canal wall of human teeth: A scanning electron microscope study

Objective: The aim of this study is to analyze the effects of copper vapor laser radiation on the radicular wall of human teeth. Materials and Methods: Immediately after the crowns of 10 human uniradicular teeth were cut along the cement-enamel junction, a chemical-surgical preparation of the radicular canals was completed. Then the roots were longitudinally sectioned to allow for irradiation of the surfaces of the dentin walls of the root canals. The hemi-roots were separated into two groups: one (control) with five hemi-roots that were not irradiated, and another (experimental) with 15 hemi-roots divided into three subgroups that were submitted to the following exposure times: 0.02,0.05, and 0.1 s. A copper vapor laser (510.6 nm) with a total average power of 6.5 W in green emission, frequency of 16.000 Hz, and pulse duration of 30 ns was used. Results: The results obtained by scanning electron microscope analysis showed the appearance of a cavity in the region of laser beam impact, with melting, recrystallization, and cracking on the edges of the dentin of the cavity due to heat diffusion. Conclusions: We determined that the copper vapor laser produces significant morphologic changes in the radicular wall of human teeth when using the parameters in this study. However, further research should be done to establish parameters that are compatible with dental structure in order to eliminate thermal damages. © Mary Ann Liebert, Inc.