Ensaios não-destrutivos de propagação de ondas em toras e madeira serrada de Pinus. taeda L.

In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on condition. P. taeda L wood (43 years old trees) from Horto Florestal of Manduri (latitude 230 00’ south, longitude 400 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better ju regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, cons right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences between the velocity of stress waves at juvenile wood, mature wood and pith regions. Keywords: stress wave method, velocity 17 destrutivos de propagação da propagação de ondas de tensão em toras e madeira serrada de taeda L. Hernando Alfonso Lara Palma - Universidade Estadual Paulista Faculdade de Ciências Agronômicas – FCA/UNESP – Botucatu - SP, e-mail: awballarin@fca.unesp.br Luiz Antonio Vasques Hellmeister - Universidade Estadual Paulista - Faculdade de Arquitetura, FAAC/UNESP – Bauru - SP, e-mail: hellmeister@faac.unesp.br Este trabalho teve como objetivo analisar a influência do tipo de lenho, da posição da tora ao longo do fuste e das dimensões das peças desdobradas, na velocidade de as de tensão (Stress wave method), na condição de madeira verde. P. taeda L., originária de árvores de plantio do Horto Florestal de SP., com idade aproximada de 43 anos, pela facilidade de identificação dos anéis imento e demarcação das regiões de madeira adulta e madeira juvenil. Foram amostradas 6 árvores distintas, escolhidas ao acaso do talhão selecionado. De cada árvore foram retiradas 4 toras com comprimento de 2,5 m cada. Foram demarcadas nas toras a ha central (8 cm de espessura) e 4 tábuas laterais (espessura comercial de 2,5 cm), sendo duas à esquerda e duas à direita da prancha central. Foram avaliadas as relações existentes entre as velocidades de propagação das ondas de tensão na madeira íntegra (toras) e desdobrada (pranchas e tábuas), na condição de madeira verde, nas três regiões distintas do lenho: medula, madeira adulta e madeira juvenil. A análise comparativa dos resultados revelou a concordância entre as velocidades antes e após o desdobr madeira. Houve diferenciação estatisticamente significativa entre as velocidades de propagação das ondas de tensão nos lenhos adulto, juvenil e na medula. -destrutivos, método das ondas de tensão, Pinus taeda stress wave tests on green logs and lumber of Pinus taeda In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on L wood (43 years old trees) from Horto Florestal of Manduri (latitude 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better juvenile and mature wood regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, considering 2 boards on the left and 2 at the right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood, juvenile wood and pith). Comparative analyses of results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences ty of stress waves at juvenile wood, mature wood and pith regions

Calibração de um equipamento TDR (Reflectometria por Dominio do Tempo) para a Determinação da Umidade da Madeira de Grevillea robusta (Cunn.)

This study aimed to establish a calibration model of a TDR equipment to determinate thewood moisture of Grevillea robusta (Cunn.). It was selected alleatory, 11 logs of Grevillea robusta (Cunn.), it was dried in a regulate electric greenhouse at 40o C. During the dry process, the moisture was determinate, periodically and systematically by gravimetric and TDR methods. Through the gravimetric method, moisture vary from 125,88% to 6,62% while the TDR method, the variation was from 119,83% to 5,79%. The best model adjusted to the wood moisture in the determination of the function of relative dielectric constant, using this technique, was the exponential 50,20 132,72 140,27 K U e − = − ⋅ , with a R2 = 0,96, with indicator of trust or performance 0,97 they were classified as very good, according to Camargo and Sentelhas (1997). The correlation between the gravimetric method (reference) and TDR, showed to be equivalent for both methodologies. It was concluded that the TDR can be used to the determination of wood moisture of Grevillea robusta (Cunn.), in a precise and fast way, once it was established it calibration.

Caracterização dos resíduos do processamento de mandioca para produção de bioetanol

Aiming to get the best economic advantage in ethanol production from cassava roots, this study presented a physiochemical characterization from two different types of solid waste in two types of processing of the raw materials in manufacturing ethanol. The processing of cassava roots begins with the disintegration and washing the roots with the addition of 20% more water to obtain a pulp which was treated and stirred in the reactor while adding enzyme α-amylase at a temperature of 90°C for 2 hours. Then we performed a pH adjustment while lowering the temperature to 60 ° C with the addition of the enzyme amiloglucosidase and then stirring for 14 hours. The hydrolyzate obtained was the source of two types of waste which are: i) Solid residue obtained after filtration of the hydrolyatze and ii) Solid waste obtained from filtering wine after alcoholic fermentation of the hydrolyzate with the addition of a dried yeast strain Y-940 manufactured by MAURI OF BRAZIL SA (2%) at a temperature of 25º C. The results of the laboratory analysis showed that the byproducts derived from the hydrolysis and fermentation showed very similar chemical compositions. With levels between 39 and 41% fiber, 0.5% lipids, 20 and 30% carbohydrates, protein 0.5 and 1.50, 6 and 8% acidity, and 20 and 30% soluble solids.

Análise e aferição de uma fresadora CNC através da utilização das tecnologias assistidas por computador, no escaneamento 3D de amostras e processamento de imagens

The use of computer-assisted technologies such as CAD - Computed Aided Design, CAM - Computed Aided Manufacturing, CAE - Computed Aided Engineering and CNC - Computed Numerical Control, are priorities in engineering and product designers. However, the dimensional measurement between the virtual and the real product design requires research, and dissemination procedures among its users. This work aims to use these technologies, through analysis and measurement of a CNC milling machine, designed and assembled in the university. Through the use of 3D scanning, and analyzing images of the machined samples, and its original virtual files, it was possible to compare the sizes of these samples in counterposition to the original virtual dimensions, we can state that the distortions between the real and virtual, are within acceptable limits for this type of equipment. As a secondary objective, this work seeks to disseminate and make more accessible the use of these technologies.

Estudo da utilização de serragem de madeira como adsorvente para o tratamento de efluentes têxteis

The Brazilian textile industry has been a highlight in the global economy. Connected with this high economic performance there is the water consumption and the generation of great volumes of wastewater which present high concentrations of dyes and chemical substances. One of the main techniques used in the treatment of textile effluents is adsorption, which has the activated carbon as the main adsorbent. Recently, studies have been developed to find alternative materials to activated carbon and exhibiting good adsorption capacity of dyes. The aim of this work is to study the potential of sawdust as adsorbent of low cost to remove the dye Direct Green 26. The results of this type of dye removal were obtained through the study of adsorption isotherms obtained by spectrophotometry in the UV-visible region analyzed by the Langmuir model. Finally, a comparison was made of these results with those of other adsorbents. Results showed that the average removal of dye, using sawdust, was 78.8% for an initial concentration of 500mg / L and the maximum adsorption capacity of 119mg / g. These results demonstrate the great potential of sawdust as an adsorbent for the dye Direct Green 26.

Qualidade da madeira de árvores de guapuruvu (schizolobium parahyba (vell.) blake) com 15 anos provenientes de área de recuperação florestal

Pós-graduação em Ciência Florestal - FCA

Caracterização do processamento artesanal de produtos agropecuários em assentamentos rurais de Ilha Solteira-SP: das estratégias de produção à comercialização

Pós-graduação em Agronomia - FEIS

Propriedades físico-mecânicas de painéis de mdp (medium density particleboard) constituído de bambu e fibra de coco

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do acabamento superficial e da potência consumida na usinagem de fresamento frontal e cilíndrico tangencial da madeira de eucalipto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da qualidade da madeira de cinco espécies de Pinus destinadas à produção de celulose

Pós-graduação em Ciência Florestal - FCA

Aplicação de técnicas de processamento e análise de imagens para detecção de edificações e vegetação a partir de dados LiDAR

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Detecção de impressões digitais fraudulentas utilizando padrões mapeados localmente em multiescala

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sinais digitais de um durômetro portátil para a estimativa de propriedades de madeiras para dormentes

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Eficácia de produtos químicos no controle do fungo manchador botryodiplodia theobromae em madeira de hevea brasiliensis

In Brazil, the exploration and use of the Hevea brasiliensis Mull Arg. wood at the end of the latex production cycle from 30 to 35 years, is practically unknown. However, one of the most significant problems with its use relates to the high susceptibility of this species wood to the fungus Botryodiplodia theobromae attack, especially during the primary wood processing phase. The present study evaluated the efficacy of four chemicals to control juvenile and adult Hevea brasiliensis wood from the attack of the fungus stainer Botryodiplodia theobromae following the ASTM 4445 (2003) standard. The results showed that the active ingredients separately tested and evaluated in the laboratory; (Quinolinolato Copper - 8 and Carbendazim (T1); Tribromofenol 2-4-6 (T2); Extract-Based Vegetable Tannin (T3); Carbendazim and Prochloraz (T4)) do not totally prevent the contamination of Botryodiplodia theobromae in 5% level of significance

Avaliação técnica e econômica do forwarder na extração de madeira em povoamento de eucalipto de primeiro corte

This study aimed to technically and economically evaluate the Forwarder performance in the first cutting wood extraction from a Eucalyptus grandis plantation. Technical analysis included a movement and timing study by continuous method, and the productivity was determined using the extracted wood volume in cubic meters. Economical analysis included operational costs parameters and wood extraction cost. Results referred to the effective operational performance. Loading and unloading activities responded for more than ¾ of the total time of effective Forwarder operational cycle. Operational costs were influenced by maintenance and repair costs. The estimated cost of extraction was US$ 0.97 per cubic meter.