Controlled delivery of gentamicin using poly(3-hydroxybutyrate) microspheres

Poly(3-hydroxybutyrate), P(3HB), produced from Bacillus cereus SPV using a simple glucose feeding strategy was used to fabricate P(3HB) microspheres using a solid-in-oil-water (s/o/w) technique. For this study, several parameters such as polymer concentration, surfactant and stirring rates were varied in order to determine their effect on microsphere characteristics. The average size of the microspheres was in the range of 2 μm to 1.54 μm with specific surface areas varying between 9.60 m(2)/g and 6.05 m(2)/g. Low stirring speed of 300 rpm produced slightly larger microspheres when compared to the smaller microspheres produced when the stirring velocity was increased to 800 rpm. The surface morphology of the microspheres after solvent evaporation appeared smooth when observed under SEM. Gentamicin was encapsulated within these P(3HB) microspheres and the release kinetics from the microspheres exhibiting the highest encapsulation efficiency, which was 48%, was investigated. The in vitro release of gentamicin was bimodal, an initial burst release was observed followed by a diffusion mediated sustained release. Biodegradable P(3HB) microspheres developed in this research has shown high potential to be used in various biomedical applications.

Programmable Logic-Based Delivery of Small-Molecule Therapeutics from Gels

Thesis (Master's)--University of Washington, 2015

London 2012: changing delivery patterns in response to the impact of the Games on traffic flows

The paper addresses road freight transport operations during the London Olympic and Paralympic Games in 2012. It presents work carried out prior to the Games to understand pre-Games patterns of freight deliveries in London (for both light and heavy goods vehicles) and the results of modelling work carried out to assess the likely impacts of the Games road restrictions on freight operations. The modelling results indicated that increases in total hours travelled carrying out collection and delivery work would range from 1.4% to 11.4% in the six sectors considered. The results suggested increases in hours travelled in excess of 3.5% in four of the six sectors modelled. The possible actions that could be taken by organizations to reduce these negative impacts were also modelled and the results indicated that such actions would help to mitigate the impact of the road restrictions imposed on operators during the Games. The actual impacts of the 2012 Games on transport both in general terms and specifically in terms of freight transport are also discussed, together with the success of the actions taken by Transport for London (TfL) to help the road freight industry. The potential freight transport legacy of the London 2012 Games in terms of achieving more sustainable urban freight transport is considered and the steps being taken by TfL to help ensure that such a legacy can be realized are discussed. Such steps include policy-makers continuing to collaborate closely with the freight industry through the ‘London Freight Forum’, and TfL's efforts to encourage and support companies revising their delivery and collection times to the off-peak; improving freight planning in the design and management of TfL-funded road schemes; electronic provision of traffic information by TfL to the freight industry, and the further development of freight journey planning tools.

Increase urban freight efficiency with delivery and servicing plan

Delivery and Servicing Plan (DSP) is an innovative logistics concept for more efficient organisation of deliveries from the point of view of the receiver of the goods. DSP actions tested in this study include reducing the number of suppliers, grouping deliveries, selecting less distant suppliers and others. It is shown that DSP can help reduce externalities and lead to a substantial reduction of costs. A new tool was developed to calculate the benefits of different DSP options for businesses and the public sector. Reductions in costs and externalities exceeding 50% have been demonstrated in a few cases. Remaining difficulties with the concept are organisational issues, lack of knowledge, need to give external advisory support for shop owners and the limited number of successful applications to date.

Electrospun medicated shellac nanofibers for colon-targeted drug delivery

Medicated shellac nanofibers providing colon-specific sustained release were fabricated using coaxial electrospinning. A solution of 7.5 g shellac and 1.5 g of ferulic acid (FA) in 10 mL ethanol was used as the core fluid, and a mixture of ethanol and N,N-dimethylformamide (8/10 v/v) as the shell. The presence of the shell fluid was required to prevent frequent clogging of the spinneret. The diameters of the fibers (D) can be manipulated by varying the ratio of shell to core flow rates (F), according to the equation D = 0.52F−0.19. Scanning electron microscopy images revealed that fibers prepared with F values of 0.1 and 0.25 had linear morphologies with smooth surfaces, but when the shell fluid flow rate was increased to 0.5 the fiber integrity was compromised. FA was found to be amorphously distributed in the fibers on the basis of X-ray diffraction and differential scanning calorimetry results. This can be attributed to good compatibility between the drug and carrier: IR spectra indicated the presence of hydrogen bonds between the two. In vitro dissolution tests demonstrated that there was minimal FA release at pH 2.0, and sustained release in a neutral dissolution medium. The latter occurred through an erosion mechanism. During the dissolution processes, the shellac fibers were gradually converted into nanoparticles as the FA was freed into solution, and ultimately completely dissolved.

Nanofibers fabricated using triaxial electrospinning as zero order drug delivery systems

A new strategy for creating functional trilayer nanofibers through triaxial electrospinning is demonstrated. Ethyl cellulose (EC) was used as the filament-forming matrix in the outer, middle, and inner working solutions and was combined with varied contents of the model active ingredient ketoprofen (KET) in the three fluids. Triaxial electrospinning was successfully carried out to generate medicated nanofibers. The resultant nanofibers had diameters of 0.74 ± 0.06 μm, linear morphologies, smooth surfaces, and clear trilayer nanostructures. The KET concentration in each layer gradually increased from the outer to the inner layer. In vitro dissolution tests demonstrated that the nanofibers could provide linear release of KET over 20 h. The protocol reported in this study thus provides a facile approach to creating functional nanofibers with sophisticated structural features.

Effects of targeted delivery of propionate to the human colon on appetite regulation, body weight maintenance and adiposity in overweight adults.

OBJECTIVE: The colonic microbiota ferment dietary fibres, producing short chain fatty acids. Recent evidence suggests that the short chain fatty acid propionate may play an important role in appetite regulation. We hypothesised that colonic delivery of propionate would increase peptide YY (PYY) and glucagon like peptide-1 (GLP-1) secretion in humans, and reduce energy intake and weight gain in overweight adults. DESIGN: To investigate whether propionate promotes PYY and GLP-1 secretion, a primary cultured human colonic cell model was developed. To deliver propionate specifically to the colon, we developed a novel inulin-propionate ester. An acute randomised, controlled cross-over study was used to assess the effects of this inulin-propionate ester on energy intake and plasma PYY and GLP-1 concentrations. The long-term effects of inulin-propionate ester on weight gain were subsequently assessed in a randomised, controlled 24-week study involving 60 overweight adults. RESULTS: Propionate significantly stimulated the release of PYY and GLP-1 from human colonic cells. Acute ingestion of 10 g inulin-propionate ester significantly increased postprandial plasma PYY and GLP-1 and reduced energy intake. Over 24 weeks, 10 g/day inulin-propionate ester supplementation significantly reduced weight gain, intra-abdominal adipose tissue distribution, intrahepatocellular lipid content and prevented the deterioration in insulin sensitivity observed in the inulin-control group. CONCLUSIONS: These data demonstrate for the first time that increasing colonic propionate prevents weight gain in overweight adult humans.

Using Mobile Learning Games for Delivery Purposes in Humanities

Games and applications with gamified elements have been used in teaching and learning widely. Gamified applications attract the interest of students and teachers because they assist them to achieve their cognitive and pedagogical purposes. This paper describes a study that explores the use of a gamified learning application designed to introduce students at key stages 3 and 4 (ages 14-15) to ancient Greek Philosophy. The study involves 3 tests and 3 different groups of students and aimed to explore if the application improves students' knowledge and understanding and to compare different styles of subject delivering. This paper presents and discusses in details the results of the first test.

Bevacizumab in NF2-related vestibular schwannomas: a nationally coordinated approach to delivery and prospective evaluation

Background: NF2 patients develop multiple nervous system tumors including bilateral vestibular schwannomas (VS). The tumors and their surgical treatment are associated with deafness, neurological disability, and mortality. Medical treatment with bevacizumab has been reported to reduce VS growth and to improve hearing. In addition to evaluating these effects, this study also aimed to determine other important consequences of treatment including patient-reported quality of life and the impact of treatment on surgical VS rates. Methods: Patients treated with bevacizumab underwent serial prospective MRI, audiology, clinical, CTCAE-4.0 adverse events, and NFTI-QOL quality-of-life assessments. Tumor volumetrics were classified according to the REiNs criteria and annual VS surgical rates reviewed. Results: Sixty-one patients (59% male), median age 25 years (range, 10–57), were reviewed. Median follow-up was 23 months (range, 3–53). Partial volumetric tumor response (all tumors) was seen in 39% and 51% had stabilization of previously growing tumors. Age and pretreatment growth rate were predictors of response. Hearing was maintained or improved in 86% of assessable patients. Mean NFTI-QOL scores improved from 12.0 to 10.7 (P < .05). Hypertension was observed in 30% and proteinuria in 16%. Twelve treatment breaks occurred due to adverse events. The rates of VS surgery decreased after the introduction of bevacizumab. Conclusion: Treatment with bevacizumab in this large, UK-wide cohort decreased VS growth rates and improved hearing and quality of life. The potential risk of surgical iatrogenic damage was also reduced due to an associated reduction in VS surgical rates. Ongoing follow-up of this cohort will determine the long-term benefits and risks of bevacizumab treatment.

Women's Attachment as a Predictor of Pain During Labour and Post-Delivery: a Prospective Observational Study

INTRODUCTION: Labour is considered to be one of the most painful and significant experiences in a woman's life. The aim of this study was to examine whether women's attachment style is a predictor of the pain experienced throughout labour and post-delivery. MATERIAL AND METHODS:Thirty-two pregnant women were assessed during the third trimester of pregnancy and during labour. Adult attachment was assessed with the Adult Attachment Scale ' Revised. The perceived intensity of labour pain was measured using a visual analogue scale for pain in the early stage of labour, throughout labour and post-delivery. RESULTS:Women with an insecure attachment style reported more pain at 3 cm of cervical dilatation (p < 0.05), before the administration of analgesia (p < 0.01) and post-delivery (p < 0.05) than those securely attached. In multivariate models, attachment style was a significant predictor of labour pain at 3 cm of cervical dilatation and before the first administration of analgesia but not of the perceived pain post-delivery. DISCUSSION: These findings confirm that labour pain is influenced by relevant psychological factors and suggest that a woman's attachment style may be a risk factor for greater pain during labour. CONCLUSION:Future studies in the context of obstetric pain may consider the attachment style as an indicator of individual differences in the pain response during labour. This may have important implications in anaesthesiology and to promote a relevant shift in institutional practices and therapeutic procedures.