Perfil logístico del sector del cemento en Colombia

Este proyecto caracteriza la industria del cemento en Colombia a partir de la contextualización y descripción de esta actividad en el mundo y en el país, describiendo y analizando asuntos relacionados con la cadena de suministro de esta. Teniendo en cuenta los actores directos e indirectos que en esta interactúan y temas como el comercio internacional, el desempeño y la competitividad regional de la industria nacional, la percepción empresarial y factores como la responsabilidad social y las buenas prácticas. Además de la descripción de los factores nacionales que afectan a la industria como la infraestructura, el transporte y el desempeño logístico del país. En la contextualización mundial se presentan temas como la producción, oferta y demanda mundial de este producto y las principales tendencias y prácticas logísticas que caracterizan a esta industria internacionalmente; en el panorama nacional se caracteriza la competitividad y desempeño logístico del país y los factores que afectan a la industria del cemento. Se presentan los orígenes e historia de la industria en el país y se dan datos de la producción, despachos y comercio internacional de esta además de una breve descripción de su cadena de suministro y la caracterización de las relaciones entre sus eslabones. Finalmente se describen los entes con los cuales interactúa la industria, se describe lo más relevante en cuanto a políticas ambientales, responsabilidad social y buenas prácticas de los principales productores del país y se concluye con la caracterización de la competitividad general de la industria a nivel nacional y los retos y problemáticas que afronta el sector y que lo limitan para mejorar su desempeño a nivel regional.

Sexual symbolism in the Early Neolithic of the southern Levant: pestles and mortars from WF16

WF16 is a Pre-Pottery Neolithic site in the Southern Levant that has produced an important collection of ground stone artefacts. These include one explicit and one ambiguous representation of a phallus – the latter may be a human head and shoulders. The authors note the visual similarity of certain pestles from WF16 to phalli and suggest that such artefacts and their use may have been imbued with sexual metaphor. As such, the most potent references to sex, reproduction and fertility in the early Neolithic may not be the exotic figures claimed to be ‘Mother Goddesses’ but located in the most mundane of domestic artefacts.

Climate change policy and business climate strategies: EU cement companies' response to climate change and barriers against action

The paper provides a descriptive analysis of the carbon management activities of the cement industry in Europe based on a study involving the four largest producers of cement in the world. Based on this analysis, the paper explores the relationship between managerial perception and strategy with particular focus on the impact of government regulation and competitive dynamics. The research is based on extensive documentary analysis and in-depth interviews with senior managers from the four companies who have been responsible for and/or involved in the development of climate change strategies. We find that whilst the cement industry has embraced climate change and the need for action, their remains much scope for action in their carbon management activities with current effort concentration on hedging practices and win-win efficiency programs. Managers perceive that inadequate and unfavourable regulatory structure is the key barrier against more action to achieve emission reduction within the industry. EU Cement companies are also shifting their CO2 emissions to less developed countries of the South.

Influence of Post and Resin Cement on Stress Distribution of Maxillary Central Incisors Restored with Direct Resin Composite

The current study evaluated the influence of two endodontic post systems and the elastic modulus and film thickness of resin cement on stress distribution in a maxillary central incisor (MCI) restored with direct resin composite using finite element analysis (FEA). A three-dimensional model of an MCI with a coronary fracture and supporting structures was performed. A static chewing pressure of 2.16 N/mm(2) was applied to two areas on the palatal surface of the composite restoration. Zirconia ceramic (ZC) and glass fiber (GF) posts were considered. The stress distribution was analyzed in the post, dentin and cement layer when ZC and GF posts were fixed to the root canals using resin cements of different elastic moduli (7.0 and 18.6 GPa) and different layer thicknesses (70 and 200 mu m). The different post materials presented a significant influence on stress distribution with lesser stress concentration when using the GF post. The higher elastic modulus cement created higher stress levels within itself. The cement thicknesses did not present significant changes.

Bond Strength of Fiber Posts in Different Root Thirds Using Resin Cement

Purpose: The aim of the study was to assess the in vitro bond strength (BS) of glass fiber posts (GF) and carbon fiber posts (CF) in the cervical, middle, and apical thirds of root canals cemented with RelyX-Unicem (RX) and Cement-Post (CP). Materials and Methods: Forty maxillary canines were divided into 4 groups (n = 10) according to the cement and post used: group 1: GF and RX; group 2: CF and RX; group 3: GF and CP; group 4: CF and CP. The push-out test was applied in the cervical, middle and apical thirds of each specimen to assess bond strength of the cement/post complex to the root canal wall. The data obtained were submitted to ANOVA (Bonferroni test, p < 0.05), and fracture analysis was done with SEM. Results: The GF posts presented the best results when cemented with RX and with CF (p < 0.05). RX presented the highest BS values for both GF and CF (p < 0.05). For all the groups, BS was higher in the cervical third, followed by the middle and apical thirds. Fracture analysis showed a predominance of cohesive fracture of posts for RX, and a predominance of adhesive fracture between dentin/cement, and mixed failure mode for CP. Conclusion: GF posts cemented with RX presented the highest BS values in all root thirds.

Brazilian sugar cane bagasse ashes from the cogeneration industry as active pozzolans for cement manufacture

For proper management of wastes and their possible recycling as raw materials, complete characterization of the materials is necessary to evaluate the main scientific aspects and potential applications. The current paper presents a detailed scientific study of different Brazilian sugar cane bagasse ashes from the cogeneration industry as alternative cementing materials (active addition) for cement manufacture. The results show that the ashes from the industrial process (filter and bottom ones) present different chemical and mineralogical compositions and pozzolanic properties as well. As a consequence of its nature, the kinetic rate constant (K) states that the pozzolanic activity is null for the bottom ash and very low for the filter ash with respect to a sugar cane bagasse ash obtained in the laboratory under controlled burning conditions (reference). The scarce pozzolanic activity showed by ashes could be related to a possible contamination of bagasse wastes (with soils) before their use as alternative combustibles. For this reason, an optimization process for these wastes is advisable, if the ashes are to be used as pozzolans. (C) 2011 Elsevier Ltd. All rights reserved.

Surface properties of eucalyptus pulp fibres as reinforcement of cement-based composites

The objective of the present work is to evaluate the effects of the surface properties of unrefined eucalyptus pulp fibres concerning their performance in cement-based composites. The influence of the fibre surface on the microstructure of fibre-cement composites was evaluated after accelerated ageing cycles, which simulate natural weathering. The surface of unbleached pulp is a thin layer that is rich in cellulose, lignin, hemicelluloses, and extractives. Such a layer acts as a physical and chemical barrier to the penetration of low molecular components of cement. The unbleached fibres are less hydrophilic than the bleached ones. Bleaching removes the amorphous lignin and extractives from the surface and renders it more permeable to liquids. Atomic force microscopy (AFM) helps in understanding the fibre-cement interface. Bleaching improved the fibre- cement interfacial bonding, whereas fibres in the unbleached pulp were less susceptible to the re-precipitation of cement hydration products into the fibre cavities (lumens). Therefore, unbleached fibres can improve the long-term performance of the fibre-cement composite owing to their delayed mineralization.

Evaluation of mechanical, physical and thermal performance of cement-based tiles reinforced with vegetable fibers

The objective of this work was to analyze mechanical, physical and thermal performance of roofing tiles produced with several formulations of cement-based matrices reinforced with sisal and eucalyptus fibers. The physical properties of the tiles were more influenced by the fiber content of the composite than by the type of reinforcement. The type of the fiber was the main variable for the achievement of the best results of mechanical properties. Exposure to tropical climate has caused a severe reduction in the mechanical properties of the composites. After approximately four months of age under external weathering the toughness of the vegetable fiber-cement fell to 53-68% of the initial toughness at 28 days of age. The thermal performance showed that roofing tiles reinforced with vegetable fiber are acceptable as substitutes of asbestos-cement sheets. (c) 2006 Elsevier Ltd. All rights reserved.

Improving the Fluorescence Detectability of Polycyclic Aromatic Hydrocarbons for Evaluation of Workplace Environments of Cement Industries Processing Organic Residues

The burning of organic residues and wastes in furnaces of cement industries has been an attractive and lucrative approach to eliminate stocks of these pollutants. There is a potential risk for producing PAH in the workplace of industries burning organic wastes, so that highly sensitive analytical methods are needed for monitoring the air quality of these environments. An official method for determination of PAH is based on liquid chromatography with fluorescence detection at fixed excitation and emission wavelengths. We demonstrate that a suitable choice of these wavelengths, which are changed during the chromatographic run, significantly improves the detectability of PAH in atmosphere and particulate matter collected in cement industries.

Concreto de cimento portland branco estrutural : avaliação da carbonatação e absorção capilar

O cimento branco é produzido pela pulverização de um clínquer de cimento Portland branco onde, através da diminuição do teor de óxido de ferro deste clínquer, pode-se produzir cimentos de cores claras. O concreto de cimento Portland branco estrutural chega como uma nova tendência dentro do contexto da construção civil. No entanto, por ser um material relativamente novo no mercado, estudos relacionados com este tipo de cimento se caracterizam por ser inovadores, visto que há deficiência de pesquisas neste tema e também reduzido acervo bibliográfico, principalmente nos aspectos relacionados com a durabilidade. Entretanto, sua utilização precede um embasamento teórico adicional. Assim, esse trabalho objetiva avaliar a resistência à compressão, a carbonatação e a absorção capilar de concretos moldados com quatro tipos de cimento Portland branco estrutural, comparando seus resultados com um concreto moldado com cimento Portland de alta resistência inicial (CPVARI), utilizado como referência. Outras variáveis investigadas foram a relação água/cimento (0,4; 0,5; 0,6) e cura em três idades (3, 14 e 28 dias). Todos os resultados experimentais foram modelados estatisticamente e apresentaram coeficiente de correlação superiores a 75%. Os modelos obtidos mostram que as resistências à compressão dos concretos moldados com cimentos Portland branco estudados são satisfatórias, pois equivalem às dos moldados com CPV Em termos de carbonatação, os resultados mostram um desempenho dos concretos moldados com cimento branco superior quando comparados aos moldados com cimento CPV, excetuando-se os moldados com um dos cimentos branco, mostrando a necessidade de possíveis ajustes em sua composição física e química, para que este tenha uma melhora em seu desempenho. Com relação aos valores encontrados para absorção capilar, todos os concretos obtiveram redução dos seus valores, quando comparados ao concreto referência, confirmando que concretos moldados com cimento Portland branco possuem desempenho satisfatório quando analisada a taxa de absorção de água por capilaridade.

Inferring conduct under the threat of entry : the case of Brazilian cement industry

This paper demonstrates that when an industry faces potential entry and this threat of entry constrains pre-entry prices, cost and conduct are not identified from the comparative statics of equilibrium. In such a setting, the identifying assumption behind the well-established technique of relying on exogenous demand perturbations to empirically distinguish between alternative hypotheses of conduct is shown to fail. The Brazilian cement industry, where the threat of imports restrains market outcomes, provides an empirical illustration. In particular, pricecost margins estimated using this established technique are considerably biased downward, underestimating the degree of market power. A test of conduct is proposed, adapted to this constrained setting, which suggests that outcomes in the industry are collusive and characterised by market division.