Dessecador

Este modelo é parte de um conjunto de modelos 3D produzidos pela equipe de audiovisual da SEaD/UFSCar para o jogo de realidade virtual “O Laboratório de Química”.

O açúcar de cana na ilha da Madeira: do Mediterrâneo ao Atlântico. Terminologia e tecnologia históricas e actuais da cultura açucareira

O estudo da terminologia e da tecnologia do açúcar de cana enquadra-se na abordagem do método alemão tradicional Wörter und Sachen (Palavras e Coisas) e também na abordagem da Teoria Comunicativa da Terminologia de Teresa Cabré, pretendendo, fundamentalmente, comparar, descrever e interpretar os termos da cultura açucareira do Mediterrâneo ao Atlântico, no âmbito da linguística românica. Na primeira parte deste trabalho, estudamos a terminologia e tecnologia históricas da produção açucareira agro-industrial e os vários tipos de açúcar, subprodutos e doçaria derivada desta indústria, através da documentação histórica da Sicília, Valência, Granada, Madeira, Açores, Canárias, Cabo Verde, S. Tomé e Brasil, procurando mostrar a continuidade e evolução da terminologia açucareira do Mediterrâneo para o Atlântico, tendo como foco central a Madeira, região do Mediterrâneo atlântico, que, juntamente com as Canárias, serve de ponte de transmissão da cultura açucareira do antigo para o novo mundo. Na segunda parte, referimos a evolução da tecnologia e terminologia históricas do açúcar de cana até à actualidade, centrando mais uma vez a nossa atenção na ilha da Madeira: a tecnologia mediterrânica da Sicília, Valência e Granada, a tecnologia desenvolvida na ilha da Madeira e transplantada para as ilhas atlânticas e Brasil e a situação actual das regiões açucareiras de língua portuguesa (ilha da Madeira, Cabo Verde e Brasil). A realização de inquéritos linguístico-etnográficos sobre a produção açucareira na ilha da Madeira e em Cabo Verde (ilhas de Santiago e Santo Antão) fornece-nos material oral para um estudo comparativo da terminologia e tecnologia actuais destas duas regiões açucareiras, permitindo observar também a vitalidade dos termos e técnicas históricas do açúcar madeirense nas duas regiões. A terceira parte deste trabalho é constituída por um glossário principal das terminologias histórica e actual da produção açucareira madeirense, registando na mesma entrada lexical as formas mediterrânicas da Sicília, de Valência e de Granada e as formas correspondentes que surgem nas ilhas atlânticas (Madeira, Açores, Canárias, Cabo Verde, S. Tomé) e Brasil, bem como os neologismos terminológicos desenvolvidos na ilha da Madeira ou madeirensismos. Apresentamos também um glossário de formas mediterrânicas, onde incluímos termos registados nas Canárias, que não encontramos na documentação madeirense; um glossário de termos relacionados com a indústria de doces e conservas de frutas e ainda um glossário de termos gerais, ou seja, termos não específicos da produção açucareira. Concluímos que a terminologia e a tecnologia da cultura açucareira viajam, juntamente com a planta da cana-de-açúcar e com os técnicos açucareiros, do Mediterrâneo para a ilha da Madeira e, a partir desta, para as ilhas atlânticas e para a América, sobretudo para o Brasil. Os termos e as técnicas açucareiras pouco se modificam, alterados apenas pelo uso da máquina a vapor, no século XIX, sendo os processos de produção açucareira basicamente os mesmos, embora mecanizados, e, a par de novos termos, muitos termos antigos adaptam-se às novas tecnologias. O estudo da terminologia da cultura açucareira evidencia a importância da ilha da Madeira, como epicentro entre o Mediterrâneo e o Atlântico, deste património linguístico-cultural madeirense e do próprio açúcar como produto de encontro entre línguas e culturas.

Novas metodologias para a determinação do conteúdo de ácido árcobico em alimentos frescos

A vitamina C é uma das vitaminas mais importantes para a nutrição humana e destacase pela sua eficiente acção antioxidante e participação em inúmeras reacções metabólicas como cofactor enzimático. A vitamina C inclui vários compostos que têm actividade biológica semelhante ao ácido L-ascórbico (L-AA), incluindo o produto da sua oxidação, ácido desidroascórbico (DHAA), e as formas sintéticas. Os seres humanos não são capazes de sintetizar a vitamina C, sendo necessário obter este nutriente através da alimentação. As frutas e vegetais são alimentos ricos em vitamina C, ao contrário das carnes e cereais. Existem diversos métodos analíticos disponíveis para quantificação dos teores de vitamina C nos alimentos, sendo os métodos cromatográficos os mais utilizados devido à sua capacidade de separação e elevada sensibilidade e precisão. Neste trabalho, foi desenvolvido e validado um método de cromatografia líquida de ultra-eficiência (UHPLC) para determinar o conteúdo de vitamina C total (L-AA + DHAA) em várias frutas e vegetais com proveniências diferentes. A produção de produtos hortofrutícolas na ilha da Madeira não é auto-suficiente, sendo necessário importar alguns alimentos. Realizou-se um pequeno estudo comparativo do teor total de vitamina C e a sua degradação nos produtos locais e importados. O DHAA foi medido indirectamente através da reacção com o redutor DL-1,4-ditiotreitol (DTT), antes da injecção cromatográfica. Os resultados obtidos foram comparados com a titulação iodométrica. As amostras foram extraídas durante 5 dias consecutivos sendo os extractos resultantes armazenados a -80ºC imediatamente após a extracção até ao dia de análise. A estabilidade do L-AA nos extractos conservados a diferentes temperaturas e os efeitos do cozimento dos alimentos sobre esta molécula foram avaliados. A actividade antioxidante dos produtos hortofrutícolas foi também medida pelo método ABTS (2,2-azino-bis(3-etilbenzotiazolina- 6-sulfonato). O estudo da validação do método apresentou resultados bastante satisfatórios, demonstrando uma boa repetibilidade e sensibilidade elevada. Além disso, o método proposto revelou ser uma abordagem melhorada, simples e rápida para a determinação do conteúdo de vitamina C total em diversos produtos alimentares.

Caracterização socio-econômico-cultural de raizeiros e procedimentos pós-colheita de plantas medicinais comercializadas em Maceió, AL

ARAUJO, Afranio Cesar de et al. Caracterização socio-econômico-cultural de raizeiros e procedimentos pós-colheita de plantas medicinais comercializadas em Maceió, AL. Rev. Bras. Pl. Med, Botucatu, v. 11, n. 01, p.81-91, 2009. Disponível em: . Acesso em: 04 out. 2010.

Estratégias internacionais da fruticultura do RN: o caso finobrasa processo e evolução

The present inquiry has as main objective to understand the process of formation of the international strategies of the exporting companies of fruits of the RN through the theory of the resource dependence. Aiming at to clarify as the companies they can carry through the process of internationalization through this theory had been study the behavior and economic theories of the process of internationalization of companies. Amongst the economic theories they are distinguished the eclectic paradigm of Dunning (1958), Vernon (1669) through the theory of the cycle of the product and Bucley and Casson (1979) with the theory of the international operations. In the mannering boarding they had been investigated the school of Upsala through Johanson and Valnhe (1977) with the concept of the increasing of the markets and in the distance psychic starts and the interaction of the purchaser-salesman of Hallen and Wiedersheim-Paul (1979). In this perspective it observes main the occured changes in the organization in function of this process, following the rules observed by the gradual ingression in the international market, having as base ways of entrances in the external market used by these companies, in view of the frist phase that the company presents of businesses. Ahead of you analyze of these theories the study searches to analyze the convergence of the concepts proclaimed for the theory of the dependence of resources (PFEFFER; SALANCIK, 1978). and strategies of internationalization of the companies. The research is characterized as qualitative case study which adopts and exploratory and analytical type, retrospective matrix. The adopted strategy is of case study and the unit of analysis consisting of the Finobrasa, pertaining company to the Vicunha Group. The main method of collection of data was halfstructuralized interview allied the documentary research that together had presented an empirical perspective of the internationalization process. The analysis and quarrel of the results understand the description and the interpretation of the one of the information through the technique of analyzes of content. Initially the historical of the exportation of fruits of the Rio Grande do Norte with the focus in the region Açu/Mossoró is presented and after that the information of the Finobrasa are presented as base of the study. The main events are identified that had constituted the phases of the strategical model of the company. It was observed that the dimensions most excellent amongst those proclaimed by the School of Uppsala had been the learning, staffs and the step-starts is sufficiently gifts in the reality of the company, as well as the aspects of strategical alliances since the consolidated relationship of the Vicunha Group create a more solid trajectory in the international market allied the conditions created windows of marked . One understands, therefore, that the investigated process still has base the theoretical theories of the internationalization strategies corroborating for the theoretical convergence of the rules proclaimed for the theory of the dependence of resources.

Purificação, caracterização e atividade bioinseticida de um inibidor de tripsina de sementes de Crotalaria pallida

A proteinaceous trypsin inhibitor was purified from Crotalaria pallida seeds by ammonium sulphate fractionation, affinity chromatography on immobilized Trypsin-Sepharose and TCA precipitation. The trypsin inhibitor, named ITC, had Mr of 32.5 kDa by SDS-PAGE and was composed by two subunits with 27.7 and 5.6 kDa linked by disulphide bridges, a typical characteristic of Kunitz-Inhibitor family. ITC was stable until 50°C, and at 100°C its residual activity was of about 60%. Also, ITC was stable at pHs 2 to 12. The inhibition of trypsin by ITC was non-competitive, with a Ki of 8,8 x 10-7M. ITC inhibits weakly other serine proteinases such as chymotrypsin and elastase. The inhibition of papain (44% of inhibition), a cysteine proteinase was an indicative of the bi-functionality of ITC. In vitro assays against digestive proteinases from several Lepdoptera, Diptera and Coleoptera pests were made. ITC inhibited in 100% digestive enzymes of Ceratitis capitata (fruit fly), Spodoptera frugiperda and Alabama argillacea, the last one being a cotton pest. It also inhibited in 74.4% Callosobruchus maculatus (bean weevil) digestive enzymes, a Coleoptera pest. ITC, when added in artificial diet models, affected weakly the development of C. capitata larvae and it had a WD50 of 2.65% to C. maculatus larvae

Atividades Biológicas De Xilana De Sabugo De Milho

The corn cob is an agricultural by-product still little used, this in part due to the low knowledge of the biotechnological potential of their molecules. Xylan from corn cobs (XSM) is a polysaccharide present in greater quantity in the structure of plant and its biotechnology potential is little known. This study aimed to the extraction, chemical characterization and evaluation of biological activities of xylan from corn cobs. To this end, corncobs were cleaned, cut, dried and crushed, resulting in flour. This was subjected to a methodology that combines the use of alkaline conditions with waves of ultrasound. After methanol precipitation, centrifugation and drying was obtained a yield of 40% (g/g flour). Chemical analysis indicated a high percentage of polysaccharides in the sample (60%) and low contamination by protein (0.4%) and phenolic compounds (> 0.01%). Analysis of monosaccharide composition indicated the presence of xylose:glucose:arabinose:galactose:mannose:glucuronic acid in a molar ratio 50:20:15:10:2.5:2.5. The presence of xylan in the sample was confirmed by nuclear magnetic resonance (¹H and ¹³C) and infrared spectroscopy (IR). Tests were conducted to evaluate the antioxidant potential of XSM. This showed a total antioxidant capacity of 48.45 EAA/g sample. However, did not show scavenging activity of superoxide and hydroxyl radical and also reducing power. But, showing a high capacity chelating iron ions with 70% with about 2 mg/mL. The ability to XSM to influence cell proliferation in culture was also evaluated. This polymer did not influence the proliferation of normal fibroblast cells (3T3), however, decreased the rate of proliferation of tumor cells (HeLa) in a dose-dependent, reaching an inhibition of about 50% with a concentration around 2 mg/mL. Analyzing proteins related to cell death, by immunoblotting, XSM increases the amount of Bax, Bcl-2 decrease, increase cytochrome c and AIF, and reduce pro-caspase-3, indicating the induction of cell death induced apoptosis dependent and independent of caspase. XSM did not show anticoagulant activity in the PT test. However, the test of activated partial thromboplastin time (aPTT), XSM increased clotting time at about 5 times with 600 μg of sample compared with the negative control. The presence of sulfate on the XSM was discarded by agarose gel electrophoresis and IR. After carboxyl-reduction of XSM the anticoagulant activity decreased dramatically. The data of this study demonstrate that XSM has potential as antioxidant, antiproliferative and anticoagulant compound. Future studies to characterize these activities of XSM will help to increase knowledge about this molecule extracted from corn and allow their use in functional foods, pharmaceuticals and chemical industries.

Influência da gipsita no surgimento de eflorescência em telhas cerâmicas

The red ceramic industry is recognized as of major importance in Piauí State. The State capital, Teresina, is the greatest producer of this material ( production about 18 million peaces), which is used mainly for masonry sealing blocks. One of the most frequent problems in this kind of products is the efflorescence. This work has the main objective of studying the influence of gypsum addition on non-glazed tiles, by using the local industry production standards. The raw materials were characterized by FRX, DRX, TGA, DTA and AD. Extruded test specimens were made with the addition of 1, 3 and 5% of gypsum in the ceramic paste, burned at 850oC, 950oC and 1050oC and submitted to further technological tests and microestrutural analysis by the scanning electron microscope. In order to accelerate the aging of bodies of evidence, they were immersed in successive water baths and posterior drying. The reference ceramic paste showed tendency to efflorescence formation after drying and consolidated efflorescence after burning, but no affecting the technological results

Síntese de zeólita A a partir de diatomita como fonte de aluminossilicato

The synthesis of zeolites from natural sources of silicon and aluminum are promising alternative routes to obtain porous or zeolite MCM family. Such materials are typically used in catalytic processes and / or adsorption is to obtain new products or for separation and purification processes thereof. Environmental legislation is becoming stricter and requires the use of materials more efficient, aiming to achieve pollution prevention, by gas or liquid contaminants in the environment. In order to obtain a material with environmentally friendly features, this study aimed at the synthesis of zeolite A, from an amorphous sediment, diatomite, which is found in abundance in the northeast region of Brazil, may be substituted for conventional products the production of zeolite, involving higher costs. The methodology for obtaining the "Zeolite A" using as a source of silica and alumina diatomite is simple, since this is a source of silicon, not requiring therefore a structural driver, but also by heat treatment, only drying conventional to remove water. The "zeolite A" was obtained from diatomite, but as an intermediate step we obtained the sodalite. The characterization was made by the following techniques: EDX, XRD, FT-IR, SEM and determining a specific area by the BET method and the BJH method for checking the diameter of pores. By characterization of the obtained material was first demonstrated the achievement of sodalite and after modification of the same, there was obtained zeolite A

Efeito da tecnologia de microondas nas propriedades tecnológicas dos componentes de cerâmica estrutural

O processamento térmico de materiais cerâmicos via energia de microondas, no estágio atual, vem ganhando cada dia mais importância, tendo em vista suas inúmeras aplicações, como por exemplo: aplicação de microondas na área de processamento mineral (aquecimento de minérios antes da moagem, secagem, redução carbotérmica de óxidos minerais, lixiviação, fusão, pré-tratamento de minérios e concentrados de ouro refratário, regeneração de carvão, etc. de acordo com Kigman & Rowson, 1998). Em virtude de uma série de vantagens em potencial, frente aos métodos convencionais de aquecimento, como redução no tempo de processamento; economia de energia; diminuição do diâmetro médio das partículas e melhoramento nas propriedades tecnológicas em geral, esta tecnologia vem se destacando. Neste contexto, o objetivo geral deste trabalho, é desenvolver uma pesquisa visando identificar e caracterizar novas opções de matérias-primas cerâmicas como argilas, feldspatos e caulins que sejam eficazes para definir a formulação de uma ou mais massas para produção de componentes de cerâmica estrutural com propriedades físicas, mecânicas e estéticas adequadas após passarem por sinterização convencional e por energia de microondas destacando as vantagens desta última. Além dos requisitos técnicos e de processo, as formulações apresentadas deverão atender às expectativas de preço e de logística de fornecimento. No estudo foram conformados corpos-de-prova por extrusão e prensagem, sinterizados em fornos microondas e convencional, sob ciclos de queima mais rápidos que os atualmente praticados. As matérias-primas foram caracterizadas e analisadas, utilizando as técnicas de fluorescência por raios X (FRX), difração por raios X (DRX), análise térmica diferencial (DTA), análise térmica gravimétrica (DTG), análise granulométrica (AG), microscopia eletrônica de varredura (MEV), absorção d agua (AA), massa especifica aparente (MEA), porosidade aparente (PA), retração linear (RL) e tensão de ruptura e flexão (TRF). Os resultados obtidos indicaram que as propriedades tecnológicas de Absorção de água (AA) e Tensão de Ruptura e flexão (TRF), proposto no trabalho foram adquiridos com sucesso e estão bem além do limite exigido pelas especificações das normas da ABNT NBR 15.270/05 e 15.310/09

Compósitos de matriz metálica à base níquel com adição de TaC e NbC produzidos via metalurgia do pó

Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites

Estudo de inibidores de corrosão em concreto armado, visando a melhoria na sua durabilidade

This thesis has as objective presents a methodology to evaluate the behavior of the corrosion inhibitors sodium nitrite, sodium dichromate and sodium molybdate, as well as your mixture, the corrosion process for the built-in steel in the reinforced concrete, through different techniques electrochemical, as well as the mechanical properties of that concrete non conventional. The addition of the inhibitors was studied in the concrete in the proportions from 0.5 to 3.5 % regarding the cement mass, isolated or in the mixture, with concrete mixture proportions of 1.0:1.5:2.5 (cement, fine aggregate and coarse aggregate), superplasticizers 2.0 % and 0.40 water/cement ratio. In the modified concrete resistance rehearsals they were accomplished to the compression, consistence and the absorption of water, while to analyze the built-in steel in the concrete the rehearsals of polarization curves they were made. They were also execute, rehearsals of corrosion potential and polarization resistance with intention of diagnose the beginning of the corrosion of the armors inserted in body-of-proof submitted to an accelerated exhibition in immersion cycle and drying to the air. It was concluded, that among the studied inhibitors sodium nitrite , in the proportion of 2.0 % in relation to the mass of the cement, presented the best capacity of protection of the steel through all the studied techniques and that the methodology and the monitoring techniques used in this work, they were shown appropriate to evaluate the behavior and the efficiency of the inhibitors

Novo sistema de aplicação de drogas em cirurgias oftalmológicas

The topical corneal application of antimitotic mitomycin-C (MMC) during refractive surgery is still characterized by a lack of standardization and considerable empirism. For this reason the creation of a system capable of reliable drug delivery represents a beneficial innovation for patients submitted to these procedures. Objective: Elaborate a new MMC delivery system during the transoperatory period of photorefractive keratectomy (PRK) followed by patent application. Methods: The project consists of an in vitro experimental study to create an MMC (0.02%) release system. The drug was impregnated in sterile Whatman® 41 paper filter discs with a diameter of 8 mm. After drying, the discs were applied to antibiogram plates seeded with Staphylococcus epidermidis (American Type Culture Collection ATCC 12228), followed by the addition of a drop of sterile water. At the end of 1 minute, the discs were removed and the plates incubated for 48 hours at 35oC. Mean drop volume in the collyrium flasks was measured using analytical balance weighing. The inhibition halo (mm) was correlated with the MMC impregnated into the disc. After completion of the invention design a patent application was lodged at the National Institute of Industrial Property. Results: The correspondence between MMC-produced inhibition halos indicated that a dose of 16μg was ideal for impregnating into the discs. The mean drop volume obtained from the collyrium flasks was 37.7 μL. A minute after the application of one drop of balanced saline solution, the system released an adequate concentration for PRK surgery. Conclusion: A new MMC delivery system was created for transoperatory application in photorefractive keratectomy (PRK). Publication of the patent application (number PI 0704739-8) gives the authors exclusive intellectual property rights. The study was sponsored by Ophthalmos Indústria e Comércio de Produtos Farmacêuticos S.A. (São Paulo-SP, Brazil) and received the indispensable scientific contribution of researchers from the fields of Pharmacy, Medicine, Biology, Statistics and Law, characterizing the work as multidisciplinary, in accordance with norms established by the Postgraduate Health Sciences Program of the Federal University of Rio Grande do Norte (UFRN)

Camarão Litopenaeus vannamei: componentes de importância nutricional na carne e nos resíduos do beneficiamento

Farming of marine shrimp is growing worldwide and the Litopenaeus vannamei (L. vannamei) shrimp is the species most widely cultivated. Shrimp is an attractive food for its nutritional value and sensory aspects, being essential the maintenance of this attributes throughout storage, which takes place largely under freezing. The aim of this research was to evaluate quality characteristics of Litopenaeus vannamei shrimp, during freezing storage and to verify the effect of rosemary (Rosmarinus officinalis) adding. Considering the reutilization of processing shrimp wastes, total carotenoids analysis were conducted in waste of Litopenaeus vannamei shrimp and in the flour obtained after dryer. Monthly physicochemical and sensorial analysis were carried out on shrimp stored at 28,3 ± 3,8ºC for 180 days. Samples were placed in polyethylene bags and were categorized as whole shrimp (WS), peeled shrimp (PS), and PS with 0,5% dehydrated rosemary (RS). TBARS, pH, total carotenoid and sensorial Quantitative Descriptive Analysis (QDA) were carried out. Carotenoid total analysis was conducted in fresh wastes and processed flour (0 day) and after 60, 120 and 180 days of frozen storage. After 180 days, RS had lower pH (p = 0.001) and TBARS (p = 0.001) values and higher carotenoids (p = 0.003), while WS showed higher carotenoid losses. Sensory analysis showed that WS were firmer although rancid taste and smell were perceived with greater intensity (p = 0.001). Rancid taste was detected in RS only at 120 days at significantly lower intensity (p = 0.001) than WS and PS. Fresh wastes had 42.74μg/g of total carotenoids and processed flour 98.51μg/g. After 180 days of frozen storage, total carotenoids were significantly lower than 0 day (p<0,05). The addition of rosemary can improve sensory quality of frozen shrimp and reduce nutritional losses during storage. Shrimp wastes and flour of L. vannamei shrimp showed considerable astaxanthin content however, during storage it was observed losses in this pigment

Aptidão física relacionada à saúde de escolares Norte- Rio-Grandenses

O sedentarismo é cada vez mais acentuado entre os adolescentes em todo o mundo. Objetivou-se neste estudo analisar o estado nutricional e a aptidão física de escolares norte-rio-grandenses. Participaram 2065 sujeitos, selecionados aleatoriamente (Masc = 1066, Fem = 999) (Natal n=1158; Mossoró n= 312; Lajes n= 231), divididos em três grupos etários pelos estágios maturacionais: 10 a 12 anos, 13 a 14 anos e _ 15 anos. Foi avaliada a composição corporal (IMC, dobras cutâneas tríceps e subescapular); o hábito alimentar (questionário de prevalência do consumo por grupo alimentar); o índice de atividade física (questionário Baeck) e o nível de aptidão física (testes do salto em distância, flexibilidade, resistência abdominal e cardiovascular). Utilizando-se a estatística descritiva, testes de médias pela análise dos intervalos de confiança, o teste de Kruskall-Wallis, teste t, o Qui2 e o coeficiente de contingência. Encontraram-se diferenças significativas com p < 0001 na distribuição do índice de massa corporal (n = 1701); Região Leste Potiguar (RLP) com excesso de peso e obesidade de 16,8 % e 15,2 %, a Região Oeste 16,3% e 9,6 % e a Região Central 10,4 % e 3,9 %, com as escolas privadas contribuindo significativamente na prevalência dessas variáveis nas RLP e ROP com p < 0,003 e p < 0,001 respectivamente. O hábito alimentar demonstrou que 98,3% dos sujeitos consomem alimentos do grupo das massas 98,3%; cereais 97,7%; laticínios 94,7%; frutas 92,3%; gorduras 88,3% e as hortaliças 61,6%, não havendo diferenças significativas no consumo alimentar entre o tipo de escolas e gênero (n = 300). No índice de atividade física habitual há diferenças entre esses respectivos extratos: 2,65±0,78 e 2,81±0,80 (p < 0,014) e 2,89±0,82 e 2,57±0,78 (p < 0,001), com as práticas de atividades esportivas, programas de exercícios físicos e lazer ativo mais significativo em escolas privadas 2,85 ± 1,06 e 3,37±1,26 (p < 0,001) em prol do sexo masculino com 3,47±1,24 e 2,75±1,03 (p <0,001). Resistência abdominal ( =19) e força de membros inferiores ( =128,5 cm) foram classificadas como muito fraco , a flexibilidade ( =26,9 cm) razoável e resistência geral ( =1439 m) como bom . Conclui-se que o hábito alimentar e o baixo índice de atividade física habitual influenciam negativamente os índices da aptidão física relacionada à saúde dos escolares, com menor incidência em instituições privadas em função das práticas esportivas. Este estudo apresenta relação de interface multidisciplinar, tendo o seu conteúdo uma aplicação nos campos da Medicina, Nutrição e Educação Física