Processo alternativo de catch-up em indústrias intensivas em recursos naturais: uma análise empírica da trajetória tecnológica da indústria de bioetanol de cana-de-açúcar no Brasil

Esta tese diz respeito ao desenvolvimento tecnológico e inovação em indústrias intensivas em recursos naturais no contexto de economias emergentes. A tese explora como a acumulação de capacidades tecnológicas e os mecanismos de aprendizagem influenciaram a trajetória tecnológica na indústria de bioetanol de cana-de-açúcar no Brasil, durante o período de meados da década de 1970 a 2014. Muito se avançou na compreensão do processo de catch-up tecnológico de empresas e indústrias de economias emergentes. Contudo, essas pesquisas geralmente exploram o processo de catch-up tecnológico relacionado às trajetórias tecnológicas já mapeadas pelos líderes mundiais em indústrias de manufatura e transformação. Parte desses estudos ignora que o desenvolvimento de atividades industriais poderia ocorrer em indústrias intensivas em recursos naturais. Além disso, indústrias intensivas em recursos naturais são geralmente encapsuladas como commodities e low-tech, caracterizadas por uma limitada oportunidade de aprendizagem tecnológica e acumulação de capacidades tecnológicas. Entretanto, o processo de industrialização em indústrias intensivas em recursos naturais em regiões como a América Latina ainda é pouco compreendido e são escassas as pesquisas que investigam o processo de catch-up tecnológico em nível de indústria, com raras exceções. Baseando-se em evidências da indústria de bioetanol do Brasil, esta pesquisa explora um processo de catch-up tecnológico que tem recebido pouca atenção na literatura. Esta pesquisa adotou um desenho qualitativo com base em uma estratégia de estudo de caso em nível de indústria, com extensivo trabalho de campo e coleta de evidências empíricas de primeira mão com cobertura de longo prazo em 20 organizações. Esta pesquisa encontrou que: (1) a evolução da trajetória tecnológica da indústria de bioetanol no Brasil caracterizou-se pela abertura de uma direção distinta daquela mapeada por líderes tecnológicos existentes. Esse processo de desvio qualitativo da trajetória tecnológica dominante iniciou durante os primeiros estágios de desenvolvimento tecnológico. Assim, a indústria percorreu uma trajetória de entrada precoce em path-creating; (2) a evolução dessa trajetória tecnológica não se deu de maneira homogenia. Foram encontrados três padrões relativamente distintos de acumulação de capacidades tecnológicas para funções (ou áreas) tecnológicas específicas: feedstock, processos agrícolas e processos industriais. Nas funções de feedstock e processos industriais, houve acumulação de capacidades tecnológicas de liderança mundial, enquanto na função processos agrícolas a acumulação de capacidades tecnológicas não evoluiu além do nível intermediário; (3) essas capacidades foram acumuladas de forma dispersa entre os atores da indústria (empresas produtoras, institutos de pesquisa, universidades, fornecedores, empresas de biotecnologia etc.) e possibilitaram a abertura de oportunidades de exploração de novos negócios, ainda que modestamente aproveitadas; e (4) a sutil heterogeneidade encontrada nos padrões de acumulação de capacidades tecnológicas foi influenciada pela combinação de mecanismos de aprendizagem tecnológica utilizados pela indústria ao longo do tempo. Por fim, constatou-se também que essa trajetória tecnológica contribuiu para gerar implicações significativas e foi também influenciada por fatores outros. Não obstante, esses resultados merecem esforço de investigação mais sistemático, uma vez que foram examinados aqui de forma superficial. Concluiu-se, portanto, que posições tecnológicas relevantes, especialmente por indústrias de economias emergentes, podem ser alcançadas por meio de trajetórias tecnológicas que não se baseiam, necessariamente, em tecnologias dominantes, já exploradas por líderes mundiais, de economias avançadas. Assim, os processos alternativos de catch-up podem ser altamente relevantes para a obtenção de progresso industrial. Ademais, a pesquisa concluiu que as indústrias intensivas em recursos naturais oferecem oportunidades para inovações significativas, e podem ser protagonistas nesse processo de catch-up alternativo, particularmente no contexto de países abundantes em recursos naturais. Assim sendo, esta pesquisa contribui para gerar novas evidências e explicações que nos ajudem a ampliar a noção de alternativas para o desenvolvimento industrial e econômico no contexto de economias emergentes. No debate sobre desenvolvimento industrial e econômico, as trajetórias tecnológicas alternativas, bem como as indústrias intensivas em recursos naturais, deveriam receber uma atenção especial por parte de decisores de políticas públicas e de ações empresariais.

Prática de gestão de projetos : um estudo de caso da aderência e dissonância da sistemática de uma empresa brasileira de PMBOK

Os projetos são frequentemente utilizados como um meio de direta ou indiretamente alcançar os objetivos do plano estratégico de uma organização e está em curso um movimento de valorização desta prática. Esta valorização da gestão por projeto é perceptível no crescente número de instituições preocupadas em disseminar a disciplina de gerenciamento de projetos, no movimento por parte dos executivos em promover a profissão do gerente de projetos e no volume de investimento financeiro dedicado a esta prática. A atual confiança neste modelo de gestão traz consigo uma alta expectativa quanto a seus resultados, que, por sua vez, exigem uma metodologia de gestão eficiente. Uma das maiores empresas brasileira é reconhecida mundialmente pela excelência em sua implantação de projetos de grande a porte financeiro. Por trás deste sucesso está uma sistemática desenvolvida internamente para a gestão de projetos. Tendo em vista a inexistência de uma instituição brasileira de práticas de projeto, qual será a aderência da sistemática da empresa a prática internacional de gestão de projetos? Este estudo de caso busca apontar os principais pontos de aderência e a dissonância entre a sistemática proposta pela empresa e a metodologia de gestão de projetos do Project Management Institute, o PMBOK.

Responsabilidade social empresarial: o caso de uma indústria alimentícia no estado do Pará

The theme of corporate social responsibility (CSR) provides discussion and analysis and relatively recent, particularly in the last twenty years, has grown into the world as well as in Brazil, the interest on the involvement of the business sector in social activities or projects facing combating poverty. However, a lack of socialization of successful experiences in the practice of CSR and clarity and consensus concepts generate deviations of understanding on the subject and the structuring of interventions. This research aimed to reveal how corporate social responsibility of the IMA Food was developed from Project Nursery Saci. The research took place under a qualitative approach of descriptive-explanatory, conducted through semi-structured interviews and non-participatory observation and interviewed 35 people in total. The interpretation and analysis of data occurred through a categorical content analysis, having as theoretical approach to socioeconomic CSR. The results showed that the major form of social responsibility of the Food IMA is based on a classical approach of CSR, focusing on philanthropy. The absence of a more systematic management of the project and reflect the fragility, instability and lack of commitment towards the community. The contributions generated by the project are substantial and important, but do not reach the development occasioned by the company. However, none of this invalidates the initiative of the organization's commitment to the community, however, requires a reassessment and restructuring of the proposal in a way that leverages the performance of the project and the company itself and it can more effectively contribute to society

Estrutura de organizações sociais: adaptação aos projetos sociais ou às pressões institucionais?

This is a study concerning in the structure of non governmental organizations, based on the institutional theory. It aims to understand the relation among structure, social projects and environmental influences, analyzing if there is coherence with project social or expresses adaptation to the institutional pressures of the environment. It introduces as theoretical support for the themes, studies about institutional theory and social structure. The research is descriptive and exploratory; it also applies to a study of case, based on the technical procedures. From the research universe, that was compound by non governmental organizations from Natal, RN, Brasil, it was chosen the Casa Renascer, a non governmental organization that works with the combat to the violence and sexual exploration of children and teenagers. The data collection process employed includes documental research, observations and semi structured research devices, guided by the organizational process proposed by Serva (1996) and by the institutional theory. The collected data were qualitatively treated. The analysis was divided into three parts, following the research matters. The social project characterization demonstrated that the organization went by three main phases. The first one, characterized by focus in women and girls education and health; the second shows the emphasis on girls in social risk situation, with preventive approach; and the last one, characterized by victims assistance of violence and sexual exploration. From the analysis using the institutional theory mechanisms, the results showed that exists coherence between structure and environmental influences, but a weak coherence between structure and social projects. It indicates as main determinant of the structure, an aspect forgotten by the institutional theory, the power. It was observed the presence from normative, coercive and mimetic mechanisms, highlighting normative influences

A ideologia da encenação: uma análise dos aspectos cênico/ideológicos da encenação produzida pela indústria cultural

The research that led to this dissertation adopted a set of scenic/ideological aspects inherent to the productions of the Culture Industry as its object of research. The intellectual output of Theodor W. Adorno and Max Horkheimer underscored the approaches on this subject, since it provides the same set of scenic/ideological features to be explored because, according to the authors, scenes produced by the culture industry are linked to the dominant ideology, since they act in favor of maintaining the status quo. The first objective was the definition this set of features inherent to the scene produced by the culture industry, through the exploration of literature produced by Adorno and Horkheimer, so it was possible to define a set composed of nine elements: Construction of characters as characteristic types; Stereotypes; Naturalization of Stereotyped language; Simplistic playwriting; Reuse dramatic formula; Love and sexuality as themes of plots; Utilization of tragic element; Objetive representation; Approximation of fiction and reality. The second goal was the analysis of scene produced by the culture industry nowadays, so that it was possible to verify if any scenic/ideological aspects indicated by Adorno and Horkheimer in the mid-twentieth century were present among the productions from this beginning of the twenty-first century. Through the analysis of three soap operas produced in Brazil in 2012, it was found that the nine scenic/ideological aspects as indicated by Adorno and Horkheimer appeared in the observed productions. Additionally, a new scenic/ideological feature, not indicated by Adorno and Horkheimer is present: the merchandising

Avaliação da dolomita funcionalizada para remoção de H2S em gás natural

The natural gas is an alternative source of energy which is found underground in porous and permeable rocks and being associated or not to the oil. Its basic composition includes methane, other hydrocarbon and compounds such as carbon dioxide, nitrogen, sulphidric gas, mercaptans, water and solid particles. In this work, the dolomite mineral, a double carbonate of calcium and magnesium whose the chemical formula is CaMg(CO3)2, was evaluated as adsorbent material. The material was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, differential thermal analysis, specific surface area, porosity, scanning electronic microscopy and infrared spectroscopy. Then the material was functionalized with diethanolamine (dolomite+diethanolamine) and diisopropylamine (dolomite+diisopropylamine). The results indicated that the adsorbents presented appropriate physiochemical characteristics for H2S adsorption. The adsorption tests were accomplished in a system coupled to a gas chromatograph and the H2S monitoring in the output of the system was accomplished by a pulsed flame photometric detector (PFPD). The adsorbents presented a significant adsorption capacity. Among the analyzed adsorbents, the dolomite+diethanolamine presented the best capacity of adsorption. The breakthrough curves obtained proved the efficiency of this process

Formulação e caracterização de matérias-primas para revestimento cerâmico Semi-Poroso com adição de chamote de telhas

The ceramics industry in Piauí is nowadays with 55 industries where 11 are in Teresina which is the mainstream of the state, producing 55 million shingles; in which 10 % is of this production is wasted being sometimes thrown on the margins of rivers, roads and highways provoking an environmental degradation. The main goal of this work is to verify the potential of producing semi porous ceramic using grog of shingles, on the first part of this work bodies-of-proof were produced from a basic formula of an industry, doping it with 5 %, 10 %, 15 % and 20 % in mass and in the second part of this work some bodies-of-proof were produced from a formula where one raw material was substituted by 50 % of grog and another substituting it all by grog, bodies-of-proof made of a basic formula previously announced was used for experiment control.The grog and the raw materials were characterized by: particle size analysis , thermal differential analysis, X ray diffraction , X ray fluorescence, an thermal gravimetric analysis and rational analyses. The bodies-of-proof were sintetisized in an industrial oven obeying the normal cycle adopted by an industry, with peak temperatures of 1135 oC and a fast burning cycle of 25 minutes having as energetic fuel liquefied petroleum gas . The pieces that were obtained by this were submersed in rehearsed physics of: water absorption of, apparent specific mass, apparent porosity, lineal retraction, rupture tension to the flexural and dilatometry; mineralogical analysis for X ray diffraction; and microstructural for electronic microscope of sweeping. For all the formulas with addition of grog, superior priorities to the requested by the requirements for semi porous and for the formula to F2-2,5 superior priorities to standard formulas which justifies the incorporation of the shingles in mass for the semi porous ceramic

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration

Adição de vermiculita expandida mícron em pastas de baixa densidade para cimentação de poços de petróleo

The northeastern region of Brazil has a large number of wells producing oil using a method of secondary recovery steam injection, since the oil produced in this region is essentially viscous. This recovery method puts the cement / coating on thermal cycling, due to the difference in coefficient of thermal expansion between cement and metal coating causes the appearance of cracks at this interface, allowing the passage of the annular fluid, which is associated with serious risk socioeconomic and environmental. In view of these cracks, a correction operation is required, resulting in more costs and temporary halt of production of the well. Alternatively, the oil industry has developed technology for adding new materials in cement pastes, oil well, providing high ductility and low density in order to withstand the thermo-mechanical loads generated by the injection of water vapor. In this context, vermiculite, a clay mineral found in abundance in Brazil has been applied in its expanded form in the construction industry for the manufacture of lightweight concrete with excellent insulation and noise due to its high melting point and the presence of air in their layers lamellar. Therefore, the vermiculite is used for the purpose of providing low-density cement paste and withstand high temperatures caused by steam injection. Thus, the present study compared the default folder containing cement and water with the folders with 6%, 8% and 10% vermiculite micron conducting tests of free water, rheology and compressive strength where it obtained the concentration of 8 % with the best results. Subsequently, the selected concentration, was compared with the results recommended by the API standard tests of filtered and stability. And finally, analyzed the results from tests of specific gravity and time of thickening. Before the study we were able to make a folder with a low density that can be used in cementing oil well in order to withstand the thermo-mechanical loads generated by steam injection

Estudo da incorporação de cascalho proveniente da perfuração de poços de petróleo em formulações para tijolos de solo-cimento

The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue

Formulação de pastas cimentícias com adição de suspensões de quitosana para cimentação de poços de petróleo

Primary cementing is one of the main operations in well drilling responsible for the mechanical stability and zonal isolation during the production of oil. However, the cement sheath is constantly under mechanical stresses and temperature variations caused by the recovery of heavy oil. In order to minimize fracture and wear of the cement sheath, new admixtures are developed to improve the properties of Portland cement slurries and avoid environmental contamination caused by leaking gas and oil. Polymers with the ability to form polymeric films are candidates to improve the properties of hardened cement slurries, especially their fracture energy. The present study aimed at evaluating the effect of the addition of a chitosan suspension on cement slurries in order to improve the properties of the cement and increase its performance on heavy oil recovery. Chitosan was dissolved in acetic ac id (0.25 M and 2 M) and added to the formulation of the slurries in different concentrations. SEM analyses confirmed the formation of polymeric films in the cementitious matrix. Strength tests showed higher fracture energy compared to slurries without the addition of chitosan. The formation of the polymeric films also reduced the permeability of the slurry. Therefore, chitosan suspensions can be potentially used as cementing admixtures for heavy oil well applications

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed

influência da adição de diferentes sais em pastas de cimento portland para cimentação de poços de petróleo

One of the great challenges at present time related with the materials area concerns of products and processes for use in petroleum industry, more precisely related to the Pre-salt area. Progresses were reached in the last years allowing the drilling of the salt layer, with the time reduction for drilling and larger success at the end. For the oil wells companies the preponderant factor is the technology, however, in spite of the progress, a series of challenges is still susceptible to solutions and one of them refers to the slurries preparation for cementing in those areas. Inside of this context, this study had for objective to analyze the influence of the salts NaCl, KCl, CaSO4 and MgSO4 in strength and chemical structure of the hydrated products. As methodology, they were prepared and analyzed cement slurries with varied concentrations of these salts that are commonly found in the saline formations. The salts concentrations used in formulations of the slurries were of 5%, 15% and 30%. The slurries were formulated with specific weight of 15,8 lb / gal and the cement used was Class G. Strength tests were accomplished in samples cured by 24 hours and 28 days. Also were realized crystallographic characterization (XRD) and morphologic (SEM). In agreement with the presented results, it is observed that the largest resistance values are attributed to the slurries with concentration of 15%. There was reduction of the strength values of the slurries formulated with concentration of 30%. Through the characterization microstructural it was possible to note the salts influence in the main cement hydrated products

Efeito da incorporação de diatomita na estabilidade e permeabilidade de compósitos cimentíceos espumados aplicados a poços de petróleo

Lightweight oilwell cement slurries have been recently studied as a mean to improve zonal isolation and sheath-porous formation adherence. Foamed slurries consisting of Portland cement and air-entraining admixtures have become an interesting option for this application. The loss in hydrostatic pressure as a consequence of cement hydration results in the expansion of the air bubbles entrapped in the cement matrix, thus improving the sheath-porous formation contact. Consequently, slurries are able to better retain their water to complete the hydration process. The main objective of the present study was to evaluate the effect of the addition of an air-entraining admixture on the density, stability and permeability of composite slurries containing Portland cement and diatomite as light mineral load. Successful formulations are potential cementing materials for low fracture gradient oilwells. The experimental procedures used for slurry preparation and characterization were based on the American Petroleum Institute and ABNT guidelines Slurries containing a pre-established concentration of the air-entraining admixture and different contents of diatomite were prepared aiming at final densities of 13 to 15 lb/gal. The results revealed that the reduction of 15 to 25% of the density of the slurries did not significantly affect their strength. The addition of both diatomite and the air-entraining admixture increased the viscosity of the slurry providing better air-bubble retention in the volume of the slurry. Stable slurries depicted bottom to top density variation of less than 1.0 lb/gal and length reduction of the stability sample of 5.86 mm. Finally, permeability coefficient values between 0.617 and 0.406 mD were obtained. Therefore, lightweight oilwell cement slurries depicting a satisfactory set of physicochemical and mechanical properties can be formulated using a combination of diatomite and air-entraining admixtures for low fracture gradient oilwells

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.