Efficacia della formazione alla salute e sicurezza sul lavoro: fattori di successo e criticità

Background: sulla base delle evidenze emerse dalle rassegne sistematiche in materia (Johnstone, 1994; Cohen et al.,1998; Robson et al., 2012; Burke et al., 2006; Ricci et al., 2015) si è ipotizzato che la formazione alla salute e sicurezza sul lavoro sia maggiormente efficace quando non è presentata come obbligatoria e venga articolata su più livelli di apprendimento, attraverso metodologie adeguate per ogni livello, con docenti che abbiano caratteristiche corrispondenti allo specifico obiettivo di apprendimento e la cui durata sia parametrata all’obiettivo stesso. Obiettivo di questa ricerca è valutare se esista e quanto sia intensa la relazione causale tra la formazione alla sicurezza sul lavoro e i suoi effetti sul miglioramento delle conoscenze, degli atteggiamenti, dei comportamenti, degli esiti per la salute, del clima di sicurezza aziendale, del controllo comportamentale percepito dai lavoratori, delle condizioni operative e procedure interne, oltre l’eventuale effetto di moderazione determinato da caratteristiche socio-demografiche dei partecipanti e dal gradimento della formazione. Metodo: la variabile indipendente è costituita dell’intervento formativo erogato, articolato in tre condizioni: formazione obbligatoria, formazione non obbligatoria, gruppo di controllo: sono stati posti a confronto due interventi di pari durata (16 settimane, per 10h complessive), realizzati con identiche modalità (step1 audio-visivo; step2 affiancamento su lavoro da parte del preposto; step3 discussione di auto-casi), ma differenziati rispetto all’essere presentati uno come formazione obbligatoria, l’altro come non obbligatoria. I due gruppi sono anche stati confrontati con un gruppo di controllo per il quale la formazione è prevista successivamente. I partecipanti sono stati assegnati in modo casuale al gruppo con obbligo formativo, senza obbligo formativo, di controllo. Sono stati presi come indicatori (variabili dipendenti) per valutare l’effetto della formazione: I livello – conoscenze: riconoscimento o produzione di un maggior numero di risposte corrette. II livello – atteggiamenti e credenze: maggiore propensione a mettere in atto comportamenti auto ed etero protettivi. III livello – comportamenti: comportamenti osservati più adeguati per la tutela della salute propria e altrui. IV livello – salute: maggior grado di benessere bio-psico-sociale auto-riferito. Le misure di esito consistono nella variazione tra la rilevazione iniziale e ogni rilevazione successiva, sulla base delle diverse misure registrate per ognuno dei quattro livelli dell’intervento formativo. Lo stesso confronto del tempo è stato realizzato per le misure del clima di sicurezza aziendale, del controllo comportamentale percepito dai lavoratori, delle condizioni operative e procedure interne, oltre l’eventuale effetto di moderazione determinato da caratteristiche socio-demografiche dei partecipanti e dal gradimento della formazione, quest’ultimo misurato solo immediatamente al termine dell’intervento. Risultati: le condizioni di intervento non differiscono in termini di efficacia, la formazione determina infatti gli stessi risultati per i partecipanti del gruppo obbligo formativo e di quello non obbligo, con una significativa differenza post-intervento rispetto al gruppo di controllo. La formazione ha un effetto forte nel miglioramento delle conoscenze che solo parzialmente decade nel tempo, ma comunque mantenendo un livello maggiore rispetto ai valori iniziali. In relazione al miglioramento di atteggiamenti e comportamenti sicuri nel lavoro al Videoterminale, l’effetto della formazione è modesto: per gli atteggiamenti si registra solo un miglioramento verso l’applicazione delle procedure come utili realmente e non come mero adempimento, ma tale effetto decade entro quattro mesi riportando i partecipanti su valori iniziali; i comportamenti invece migliorano nel tempo, ma con deboli differenze tra partecipanti alla formazione e gruppo di controllo, tuttavia tale miglioramento non decade in seguito. Non si registrano invece effetti della formazione nella direzione attesa in termini di esiti per la salute, per il miglioramento del clima di sicurezza e come maggior controllo comportamentale percepito, non risultano nemmeno dati evidenti di moderazione degli effetti dovuti a caratteristiche socio-demografiche dei partecipanti. Inoltre emerge che il gradimento per la formazione è correlato con migliori atteggiamenti (strumento audio-visivo), il miglioramento del clima di sicurezza e un maggior controllo comportamentale percepito (studio di auto-casi), ovvero gli step che hanno visto l’intervento di formatori qualificati. Infine, la formazione ha determinato migliori condizioni operative e l’adeguamento delle procedure interne. Conclusioni: la presente ricerca ci consente di affermare che la formazione erogata è stata efficace, oltre che molto gradita dai partecipanti, in particolare quando il formatore è qualificato per questa attività (step1 e 3). L’apprendimento prodotto è tanto più stabile nel tempo quanto più i contenuti sono in stretta relazione con l’esperienza lavorativa quotidiana dei partecipanti, mentre negli altri casi il decremento degli effetti è alquanto rapido, di conseguenza ribadiamo la necessità di erogare la formazione con continuità nel tempo. E’ risultato comunque modesto l’effetto della formazione per migliorare gli atteggiamenti e i comportamenti nel lavoro al VDT, ma, al di là di alcuni limiti metodologici, sono obiettivi ambiziosi che richiedono più tempo di quanto abbiamo potuto disporre in questa occasione e il cui conseguimento risente molto delle prassi reali adottate nel contesto lavorativo dopo il termine della formazione. Le evidenze finora prodotte non hanno poi chiarito in modo definitivo se attraverso la formazione si possano determinare effetti significativi nel miglioramento di esiti per la salute, anche eventualmente attraverso interventi di supporto individuale. Inoltre l’assenza di differenze significative negli effetti tra i partecipanti assegnati alla condizione di obbligo e quelli di non obbligo, eccezion fatta in direzione opposta alle attese per la misura del danno da lavoro, suggeriscono che nell’erogare la formazione, occorre sottolineare in misura molto rilevante l’importanza dell’intervento che viene realizzato, anche qualora esistesse una prescrizione normativa cogente. Infine, la ricerca ci ha fornito anche indicazioni metodologiche e misure valide che invitano ad estendere questa formazione, e la sua valutazione di efficacia, a diversi comparti economici e svariate mansioni. Nel fare questo è possibile fare riferimento, e testare nuovamente, un modello che indica la corretta percezione del rischio (conoscenza) come fattore necessario, ma non sufficiente per ottenere, con la mediazione di atteggiamenti favorevoli allo specifico comportamento, azioni sicure, attraverso le quali si rinforza l’atteggiamento e migliorano le conoscenze. La formazione, per raggiungere i propri obiettivi, deve tuttavia agire anche sui meccanismi di conformismo sociale favorevoli alla safety, questi originano da conoscenze e azioni sicure e reciprocamente le rinforzano.

The masses of the neutron and donor star in the high-mass X-ray binary IGR J18027-2016

Aims. We report near-infrared observations of the supergiant donor to the eclipsing high mass X-ray binary pulsar IGR J18027-2016. We aim to determine its spectral type and measure its radial velocity curve and hence determine the stellar masses of the components. Methods. ESO/VLT observations of the donor utilising the NIR spectrograph ISAAC were obtained in the H and K bands. The multi-epoch H band spectra were cross-correlated with RV templates in order to determine a radial solution for the system. Results. The spectral type of the donor was confirmed as B0-1 I. The radial velocity curve constructed has a semi-amplitude of 23.8 ± 3.1 km s-1. Combined with other measured system parameters, a dynamically determined neutron star mass of 1.4  ±  0.2–1.6  ±  0.3 M⊙ is found. The mass range of the B0-B1 I donor was 18.6  ±  0.8–21.8  ±  2.4 M⊙. These lower and upper limits were obtained under the assumption that the system is viewed edge-on (i = 90° with β = 0.89) for the lower limit and the donor fills its Roche lobe (β = 1 with i = 73.1°) for the upper limit respectively.

Temperature influence on the physical and mechanical properties of a porous rock: San Julian's calcarenite

This work discusses the results from tests which were performed in order to study the effect of high temperatures in the physical and mechanical properties of a calcarenite (San Julian's stone). Samples, previously heated at different temperatures (from 105 °C to 600 °C), were tested. Non-destructive tests (porosity and ultrasonic wave propagation) and destructive tests (uniaxial compressive strength and slake durability test) were performed over available samples. Furthermore, the tests were carried out under different conditions (i.e. air-cooled and water-cooled) in order to study the effect of the fire off method. The results show that uniaxial compressive strength and elastic parameters (i.e. elastic modulus and Poisson's ratio), decrease as the temperature increases for the tested range of temperatures. A reduction of the uniaxial compressive strength up to 35% and 50% is observed in air-cooled and water-cooled samples respectively when the samples are heated to 600 °C. Regarding the Young's modulus, a fall over 75% and 78% in air-cooled and water-cooled samples respectively is observed. Poisson's ratio also declines up to 44% and 68% with the temperature in air-cooled and water-cooled samples respectively. Slake durability index also exhibits a reduction with temperature. Other physical properties, closely related with the mechanical properties of the stone, are porosity, attenuation and propagation velocity of ultrasonic waves in the material. All exhibit considerable changes with temperature.

Correlation of Anterior and Posterior Corneal Shape in Keratoconus

Purpose: To evaluate the correlation of the mean curvature and shape factors of both corneal surfaces for different corneal diameters measured with the Scheimpflug photography–based system in keratoconus eyes. Methods: A total of 61 keratoconus eyes of 61 subjects, aged 14 to 64 years, were included in this study. All eyes received a comprehensive ophthalmologic examination including anterior segment and corneal analysis with the Sirius system (CSO): anterior and posterior mean corneal radius for 3, 5, and 7 mm (aKM, pKM), anterior and posterior mean shape factor for 4.5 and 8 mm (ap, pp), central and minimal corneal thickness, and anterior chamber depth. Results: Mean aKM/pKM ratio around 1.20 (range, 0.95–1.48) was found for all corneal diameters (P = 0.24). Weak but significant correlations of this ratio with pachymetric parameters were found (r between −0.28 and −0.34, P < 0.04). The correlation coefficient between aKM and pKM was ≥0.92 for all corneal diameters. A strong and significant correlation was also found between ap and pp (r ≥ 0.86, P < 0.01). The multiple regression analysis revealed that central pKM was significantly correlated with aKM, central corneal thickness, anterior chamber depth, and spherical equivalent (R2 ≥ 0.88, P < 0.01) and that 8 mm pp was significantly correlated with 8 mm ap and age (R2 = 0.89, P < 0.01). Conclusions: Central posterior corneal curvature and shape factor in the keratoconus eye can be consistently predicted from the anterior corneal curvature and shape factor, respectively, in combination with other anatomical and ocular parameters.

Thermodynamic, surface and structural properties of liquid Co-Si alloys

The knowledge of thermophysical properties of liquid Co-Si alloys is a key requirement for manufacturing of composite materials by infiltration method. Despite this need, the experimental and predicted property data of the Co-Si system are scarce and often inconsistent between the various sources. In the present work the mixing behaviour of Co-Si melts has been analysed through the study of the concentration dependence of various thermodynamic, surface (surface tension and surface composition) and structural properties (concentration fluctuations in the long-wavelength limit and chemical short-range order parameter) in the framework of the Compound Formation Model (CFM) and Quasi Chemical Approximation for regular solutions (QCA). In addition, the surface tension of the Co22·5Si77.5 (in at%) eutectic alloy, that is proposed to be used as the infiltrant, has been measured by the pendant drop method at temperatures ranging from 1593 to 1773 K. The results obtained were discussed with respect to both, temperature and concentration, and subsequently compared with the model predictions and literature data.

Transferability of Regional Permafrost Disturbance Susceptibility Modelling Using Generalized Linear and Generalized Additive Models

To effectively assess and mitigate risk of permafrost disturbance, disturbance-p rone areas can be predicted through the application of susceptibility models. In this study we developed regional susceptibility models for permafrost disturbances using a field disturbance inventory to test the transferability of the model to a broader region in the Canadian High Arctic. Resulting maps of susceptibility were then used to explore the effect of terrain variables on the occurrence of disturbances within this region. To account for a large range of landscape charac- teristics, the model was calibrated using two locations: Sabine Peninsula, Melville Island, NU, and Fosheim Pen- insula, Ellesmere Island, NU. Spatial patterns of disturbance were predicted with a generalized linear model (GLM) and generalized additive model (GAM), each calibrated using disturbed and randomized undisturbed lo- cations from both locations and GIS-derived terrain predictor variables including slope, potential incoming solar radiation, wetness index, topographic position index, elevation, and distance to water. Each model was validated for the Sabine and Fosheim Peninsulas using independent data sets while the transferability of the model to an independent site was assessed at Cape Bounty, Melville Island, NU. The regional GLM and GAM validated well for both calibration sites (Sabine and Fosheim) with the area under the receiver operating curves (AUROC) N 0.79. Both models were applied directly to Cape Bounty without calibration and validated equally with AUROC's of 0.76; however, each model predicted disturbed and undisturbed samples differently. Addition- ally, the sensitivity of the transferred model was assessed using data sets with different sample sizes. Results in- dicated that models based on larger sample sizes transferred more consistently and captured the variability within the terrain attributes in the respective study areas. Terrain attributes associated with the initiation of dis- turbances were similar regardless of the location. Disturbances commonly occurred on slopes between 4 and 15°, below Holocene marine limit, and in areas with low potential incoming solar radiation

Essays in dynamic optimal taxation: working experience, unemployment scarring and poverty

This thesis investigates the design of optimal tax systems in dynamic environments. The first essay characterizes the optimal tax system where wages depend on stochastic shocks and work experience. In addition to redistributive and efficiency motives, the taxation of inexperienced workers depends on a second-best requirement that encourages work experience, a social insurance motive and incentive effects. Calibrations using U.S. data yield higher expected optimal marginal income tax rates for experienced workers for most of the inexperienced workers. They confirm that the average marginal income tax rate increases (decreases) with age when shocks and work experience are substitutes (complements). Finally, more variability in experienced workers' earnings prospects leads to increasing tax rates since income taxation acts as a social insurance mechanism. In the second essay, the properties of an optimal tax system are investigated in a dynamic private information economy where labor market frictions create unemployment that destroys workers' human capital. A two-skill type model is considered where wages and employment are endogenous. I find that the optimal tax system distorts the first-period wages of all workers below their efficient levels which leads to more employment. The standard no-distortion-at-the-top result no longer holds due to the combination of private information and the destruction of human capital. I show this result analytically under the Maximin social welfare function and confirm it numerically for a general social welfare function. I also investigate the use of a training program and job creation subsidies. The final essay analyzes the optimal linear tax system when there is a population of individuals whose perceptions of savings are linked to their disposable income and their family background through family cultural transmission. Aside from the standard equity/efficiency trade-off, taxes account for the endogeneity of perceptions through two channels. First, taxing labor decreases income, which decreases the perception of savings through time. Second, taxation on savings corrects for the misperceptions of workers and thus savings and labor decisions. Numerical simulations confirm that behavioral issues push labor income taxes upward to finance saving subsidies. Government transfers to individuals are also decreased to finance those same subsidies.

Description of recent sediments of Nile Delta, Red Sea and Gulf of Aden (Table 1-3)

The study of textural, structural, chemical, and physical properties of fine-grained recent marine sediments leads to the conclusion that only a few compositional factors are responsible for significant changes in mass physical characteristics in the upper meters below sea bottom. Fossil-induced porosity increases water content and liquid limit. It also seems to have partially influenced the plastic limit and plasticity index of calcareous sandy silts from the Red Sea and the western Gulf of Aden so that they become similar to the montmorillonite rich prodelta clays from the Nile Delta. Diagrams based on liquid limit and plasticity loose their original meaning in these cases. Activity of sediments rich in microorganisms can be higher than that of montmorillonitic clay. The shear strength-depth relationship of normally consolidated sediments is surprisingly little influenced by changes in sand or clay content and clay mineralogy. Only high lime content, submarine erosion and beginning cementation increase the strength considerably. Erosional disconformities near the present surface can be deduced from the strength-depth curve when as little as 1 or 2 m sediment have been removed. Flat or irregular strength-depth curves indicate beginning cementation and probably discontinuous sedimentation, provided the composition of the material remains in some degree constant. In our samples diagenetic pyrite, but no recristallisation of carbonates could be detected under the microscope. Underconsolidation and excess pore-water pressure, factors which tend to foster submarine slides, mud lumps, and diapiric folding, seem to be restricted Varito areas with mainly rapidly deposited, homogeneous or layered sediments. But where an abundance of burrowing organisms increases the vertical permeability of the sediment, normal consolidation and stable deposits are to be expected, at least in the upper meters below the present surface. According to 14C-determinations on calcareous microorganisms the rate of deposition of the investigated sediments seems to range from 26 to 167 cm per 1000 years.

ASCS background information.

Bibliography of agriculture

Background information on the Soviet Union in international relations

At head of title: 81st Cong., 2d sess. Committee print.

Background research on the top structure of the government of the city of New York.

v.1. Top structure. The mayor.--v.2. The Board of Estimate. The borough presidents.--v.3. The City Council. Finance management.--v.4. Independent studies.

Fetch-limited wave growth in Nootka Sound

Senior thesis written for Oceanography 445

An observational and theoretical study of the structure and propagation of the Madden-Julian Oscillation

Thesis (Ph.D.)--University of Washington, 2016-06

The surface brightness and colour-magnitude relations for Fornax cluster galaxies

We present BVI photometry of 190 galaxies in the central 4 x 3 deg(2) region of the Fornax cluster observed with the Michigan Curtis Schmidt Telescope. Results from the Fornax Cluster Spectroscopic Survey (FCSS) and the Flair-II Fornax Surveys have been used to confirm the membership status of galaxies in the Fornax Cluster Catalogue (FCC). In our catalogue of 213 member galaxies, 92 (43 per cent) have confirmed radial velocities. In this paper, we investigate the surface brightness-magnitude relation for Fornax cluster galaxies. Particular attention is given to the sample of cluster dwarfs and the newly discovered ultracompact dwarf galaxies (UCDs) from the FCSS. We examine the reliability of the surface brightness-magnitude relation as a method for determining cluster membership and find that at surface brightnesses fainter than 22 mag arcsec(-2), it fails in its ability to distinguish between cluster members and barely resolved background galaxies. Cluster members exhibit a strong surface brightness-magnitude relation. Both elliptical (E) galaxies and dwarf elliptical (dE) galaxies increase in surface brightness as luminosity decreases. The UCDs lie off the locus of the relation. B-V and V-I colours are determined for a sample of 113 cluster galaxies and the colour-magnitude relation is explored for each morphological type. The UCDs lie off the locus of the colour-magnitude relation. Their mean V - I colours (similar to1.09) are similar to those of globular clusters associated with NGC 1399. The location of the UCDs on both surface brightness and colour-magnitude plots supports the 'galaxy threshing' model for infalling nucleated dwarf elliptical (dE, N) galaxies.

Swash overtopping and sediment overwash on a truncated beach

New experimental laboratory data are presented on swash overtopping and sediment overwash on a truncated beach, approximating the conditions at the crest of a beach berm or inter-tidal ridge-runnel. The experiments provide a measure of the uprush sediment transport rate in the swash zone that is unaffected by the difficulties inherent in deploying instrumentation or sediment trapping techniques at laboratory scale. Overtopping flow volumes are compared with an analytical solution for swash flows as well as a simple numerical model, both of which are restricted to individual swash events. The analytical solution underestimates the overtopping volume by an order of magnitude while the model provides good overall agreement with the data and the reason for this difference is discussed. Modelled flow velocities are input to simple sediment transport formulae appropriate to the swash zone in order to predict the overwash sediment transport rates. Calculations performed with traditional expressions for the wave friction factor tend to underestimate the measured transport. Additional sediment transport calculations using standard total load equations are used to derive an optimum constant wave friction factor of f(w)=0.024. This is in good agreement with a broad range of published field and laboratory data. However, the influence of long waves and irregular wave run-up on the overtopping and overwash remains to be assessed. The good agreement between modelled and measured sediment transport rates suggests that the model provides accurate predictions of the uprush sediment transport rates in the swash zone, which has application in predicting the growth and height of beach berms. (c) 2005 Elsevier B.V. All rights reserved.