Composição regional e centesimal da carcaça de cordeiros criados nos sistemas de produção orgânico e convencional

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical and mechanical properties of thermally modified wood from E. grandis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cattle manure fertilization increases fig yield

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produtividade e acúmulo de potássio na soja em função da antecipação da adubação potássica no sistema plantio direto

A aplicação antecipada de fertilizante potássico no cultivo de espécies de cobertura no sistema plantio direto (SPD) pode ser vantajosa para a lavoura comercial. O objetivo deste trabalho foi avaliar a produtividade de grãos e a acumulação de K na soja em função da aplicação antecipada de fertilizante potássico na instalação do milheto em relação com o K aplicado na semeadura da soja subseqüente no SPD. O experimento foi realizado na FCA-Unesp em Botucatu-SP, nas safras 2000/2001, 2001/2002 e 2002/2003. Utilizou-se um Latossolo Vermelho distroférrico de textura média, que estava sendo cultivado com soja e aveia-preta no SPD, por dois anos antes da instalação do experimento. O milheto (Pennisetum glaucum) foi semeado em setembro sobre a palhada de aveia-preta (Avena strigosa), e a soja (Glycine max) na primeira quinzena de dezembro, nos três anos agrícolas. Utilizou-se o delineamento experimental em blocos ao acaso no esquema fatorial 4 x 4, com quatro repetições, com 0, 30, 60 e 90 kg ha-1 de K2O no milheto, combinados com 0, 30, 60 e 90 kg ha-1 de K2O na soja. Coletaram-se plantas de soja aos 25, 50, 75 e 100 dias após a emergência, e os grãos no final do ciclo, para a determinação do acúmulo de K e da produtividade. A antecipação de 60 a 90 kg ha-1 de K2O na semeadura do milheto não comprometeu o acúmulo de K na lavoura de soja. As máximas produtividades de soja foram alcançadas no primeiro e segundo ano com doses de 85 a 90 kg ha-1 de K2O, que poderiam ser antecipadas totalmente na semeadura da gramínea de cobertura. A aplicação antecipada de KCl na semeadura do milheto minimizou a exportação de K pela colheita de grãos de soja.

Aplicação tardia de nitrogênio no feijoeiro em sistema de plantio direto

A adoção de técnicas que possibilitem a maximização da eficiência do uso de nitrogênio pelo feijoeiro é de extrema importância para aumentar a produtividade e qualidade de grãos, reduzir o custo de produção e evitar contaminação ambiental. O objetivo deste trabalho foi avaliar a resposta do feijoeiro (Phaseolus vulgaris L.) à aplicação de nitrogênio em cobertura nos estádios V4 e no início do R7, em sistema de plantio direto. O delineamento experimental foi em blocos ao acaso, em esquema fatorial 2 x 4, com quatro repetições. Os tratamentos foram constituídos pela aplicação de dois níveis de N (0 e 90 kg ha-1) no estádio V4, combinados com quatro níveis de N (0, 30, 60 e 120 kg ha-1) no início do estádio R7. Quando não foi realizada adubação nitrogenada de cobertura no estádio V4, a aplicação de N no início do estádio R7 aumentou a produtividade de grãos do feijoeiro em sistema de plantio direto. A produtividade máxima de grãos foi obtida com a aplicação exclusiva de 90 kg ha-1 de N no estádio V4, sendo necessárias, para atingir o mesmo nível de produtividade, maiores doses de N quando aplicadas apenas em R7. Quando é realizada aplicação de N em V4, adubações adicionais em R7 não resultam em aumento de produtividade. A aplicação de N em cobertura no estádio V4 foi mais eficiente do que a aplicação em R7, acarretando em maior incremento na produtividade por unidade do nutriente aplicado. A aplicação de N em cobertura, nos estádios V4 e início do R7, proporcionou aumento no teor de proteína nos grãos do feijoeiro.

Avaliação da temperatura de cristalização da parafina em sistemas: parafina, solvente e tensoativo

The formation of paraffin deposits is common in the petroleum industry during production, transport and treatment stages. It happens due to modifications in the thermodynamic variables that alter the solubility of alkanes fractions present in petroleum. The deposition of paraffin can provoke significant and growing petroleum losses, arriving to block the flow, hindering to the production. This process is associated with the phases equilibrium L-S and the stages and nucleation, growth and agglomeration the crystals. That process is function of petroleum intrinsic characteristics and temperature and pressure variations, during production. Several preventive and corrective methods are used to control the paraffin crystallization, such as: use of chemical inhibitors, hot solvents injection, use of termochemistry reactions, and mechanical removal. But for offshore exploration this expensive problem needs more investigation. Many studies have been carried through Wax Appearance Temperature (WAT) of paraffin; therefore the formed crystals are responsible for the modification of the reologics properties of the oil, causing a lot off operational problems. From the determination of the WAT of a system it is possible to affirm if oil presents or not trend to the formation of organic deposits, making possible to foresee and to prevent problems of wax crystallization. The solvent n-paraffin has been widely used as fluid of perforation, raising the production costs when it is used in the removal paraffin deposits, needing an operational substitute. This study aims to determine the WAT of paraffin and the interference off additives in its reduction, being developed system paraffin/solvent/surfactant that propitiates the wax solubilization. Crystallization temperatures in varied paraffin concentrations and different solvents were established in the first stage of the experiments. In the second stage, using the methodology of variation of the photoelectric signal had been determined the temperature of crystallization of the systems and evaluated the interferences of additives to reduction of the WAT. The experimental results are expressed in function of the variations of the photoelectric signals during controlled cooling, innovating and validating this new methodology to determine WAT, relatively simple with relation the other applied that involve specific equipments and of high cost. Through the curves you differentiate of the results had been also identified to the critical stages of growth and agglomeration of the crystals that represent to the saturation of the system, indicating difficulties of flow due to the increase of the density

Degradação foto-fenton de carbono orgânico total em efluentes da indústria de beneficiamento de castanha de caju

At the cashew nut processing industry it is often the generation of wastewaters containing high content of toxic organic compounds. The presence of these compounds is due mainly to the so called liquid of the cashew nut (CNSL). CNSL, as it is commercially known in Brazil, is the liquid of the cashew nut. It looks like an oil with dark brown color, viscous and presents a high toxicity index due to the chemical composition, i.e. phenol compounds, such as anacardic acid, cardol, 2-methyl cardol and monophenol (cardanol). These compounds are bio resistant to the conventional treatments. Furthermore, the corresponding wastewaters present high content of TOC (total organic carbon). Therefore due to the high degree of toxicity it is very important to study and develop treatments of these wastewaters before discharge to the environmental. This research aims to decompose these compounds using advanced oxidative processes (AOP) based on the photo-Fenton system. The advantage of this system is the fast and non-selective oxidation promoted by the hydroxyl radicals (●OH), that is under determined conditions can totally convert the organic pollutants to CO2 and H2O. In order to evaluate the decomposition of the organic charge system samples of the real wastewater od a processing cashew nut industry were taken. This industry was located at the country of the state of Rio Grande do Norte. The experiments were carried out with a photochemical annular reactor equipped with UV (ultra violet) lamp. Based on preliminary experiments, a Doehlert experimental design was defined to optimize the concentrations of H2O2 and Fe(II) with a total of 13 runs. The experimental conditions were set to pH equal to 3 and temperature of 30°C. The power of the lamps applied was 80W, 125W and 250W. To evaluate the decomposition rate measures of the TOC were accomplished during 4 hours of experiment. According to the results, the organic removal obtained in terms of TOC was 80% minimum and 95% maximum. Furthermore, it was gotten a minimum time of 49 minutes for the removal of 30% of the initial TOC. Based on the obtained experimental results, the photo-Fenton system presents a very satisfactory performance as a complementary treatment of the wastewater studied

Avaliação e modelagem da absorção de H2S do gás natural em coluna de leito estagnado

Natural gas, although basically composed by light hydrocarbons, also presents contaminant gases in its composition, such as CO2 (carbon dioxide) and H2S (hydrogen sulfide). The H2S, which commonly occurs in oil and gas exploration and production activities, causes damages in oil and natural gas pipelines. Consequently, the removal of hydrogen sulfide gas will result in an important reduction in operating costs. Also, it is essential to consider the better quality of the oil to be processed in the refinery, thus resulting in benefits in economic, environmental and social areas. All this facts demonstrate the need for the development and improvement in hydrogen sulfide scavengers. Currently, the oil industry uses several processes for hydrogen sulfide removal from natural gas. However, these processes produce amine derivatives which can cause damage in distillation towers, can cause clogging of pipelines by formation of insoluble precipitates, and also produce residues with great environmental impact. Therefore, it is of great importance the obtaining of a stable system, in inorganic or organic reaction media, able to remove hydrogen sulfide without formation of by-products that can affect the quality and cost of natural gas processing, transport, and distribution steps. Seeking the study, evaluation and modeling of mass transfer and kinetics of hydrogen removal, in this study it was used an absorption column packed with Raschig rings, where the natural gas, with H2S as contaminant, passed through an aqueous solution of inorganic compounds as stagnant liquid, being this contaminant gas absorbed by the liquid phase. This absorption column was coupled with a H2S detection system, with interface with a computer. The data and the model equations were solved by the least squares method, modified by Levemberg-Marquardt. In this study, in addition to the water, it were used the following solutions: sodium hydroxide, potassium permanganate, ferric chloride, copper sulfate, zinc chloride, potassium chromate, and manganese sulfate, all at low concentrations (»10 ppm). These solutions were used looking for the evaluation of the interference between absorption physical and chemical parameters, or even to get a better mass transfer coefficient, as in mixing reactors and absorption columns operating in counterflow. In this context, the evaluation of H2S removal arises as a valuable procedure for the treatment of natural gas and destination of process by-products. The study of the obtained absorption curves makes possible to determine the mass transfer predominant stage in the involved processes, the mass transfer volumetric coefficients, and the equilibrium concentrations. It was also performed a kinetic study. The obtained results showed that the H2S removal kinetics is greater for NaOH. Considering that the study was performed at low concentrations of chemical reagents, it was possible to check the effect of secondary reactions in the other chemicals, especially in the case of KMnO4, which shows that your by-product, MnO2, acts in H2S absorption process. In addition, CuSO4 and FeCl3 also demonstrated to have good efficiency in H2S removal

Referência ao discurso do outro: uma análise de problemas de relações de sentido entre discurso citado direto e indireto citante no gênero monográfico

In this study we investigate the reference to other s discourse done it through the resource of direct cited discourse at background section in monographic texts produced by university students at the last phase of final work in their graduate Letras course. This work is guided in cited/related discourse studies in Bakhtin (2004), Authier-Revuz (1990, 1998, 2004), Maingueneau (1996, 2002), Charaudeau and Maingueneau (2004); in genre approaches developed by Bakhtin (2000); Maingueneau (1996, 2002); socio-discursive interaction (BRONCKART, 1999, 2003; SCHNEUWLY, 2004; DOLZ e SCHNEUWLY, 2004) and Bazerman (2005); and also in presuppositions of Textual Linguistics presented by Charrolles (1988), Van Dijk (1997), Beaugrande and Dressier (1981), Koch and Travaglia (1993, 1995), Koch (2002, 2004) and Val (2000, 2004). We have established as aims to analyze and interpret meaning relations problems in how to articulate direct cited discourse with citing discourse and at the same time explain semantic implications that comes from that articulation that compromise text meaning, at background section in that monographic genre. The analysis, by qualitative and quantitative basis in eleven monographic works that form our corpus, gave us the opportunity to achieve and see that meaning relationships in the articulation of direct cited discourse with citing discourse show problems that may be categorized into three different groups: problems related to meaning relationships with citing discourse that comes before it, problems of meaning relationships with citing discourse that comes after it, and problems with of meaning relationships with citing discourse that come before it and at the same time with citing discourse that comes after it (i.e. in relation to both). These analysis also allow us assert that, these problems, just because they occur frequently, they affect the micro level text coherence, and they also compromise the text global meaning. The results show that students at Letras Course, even in the ending process of their course do not show the real domain in relation to some ways of direct cited discourse organization and working, and also how the ideas articulation work in the construction of relations between direct cited discourse and the citing discourse that can turn those students able to produce a text that enhance acceptable patterns

Caracterização magnética e estrutural de filmes depositados por gaiola catódica

Iron nitrite films, with hundred of nanometers thick, were deposited using the Cathodic cage plasma nitriding method, with a N2/H2 plasma, over a common glass substract. The structure, surface morphology and magnetic properties were investigated using X-ray diffractometry (XRD), atomic force microscopy (AFM) and vibrating sample magnetometer (VSM). XRD shows the formation of γ FeN phase and a combination of ζFe2N + ɛFe3N phases. The film s saturation magnetization and coercivity depends on morphology, composition, grain size and treatment temperature. Temperature raising from 250 ºC to 350 ºC were followed by an increase in saturation magnetization and film s surface coercivity on the parallel direction in relative proportion. This fact can be attributed to the grain sizes and to the different phases formed, since iron rich fases, like the ɛFe3N phase, emerges more frequently on more elevated treatment s temperature. Using this new and reasonably low cost method, it was possible to deposit films with both good adhesion and good magnetic properties, with wide application in magnetic devices

Orientation dependence of stored energy of cold work in semi-processed electrical steels after temper rolling

Microhardness measurements were carried out in a low carbon lamination steel after 6% of temper rolling, in order to evaluate local variations of work hardening as a function of crystallographic orientation. EBSD (electron back scattered diffraction) was used to determine grain orientations with respect to individual rolling planes and rolling directions. Hardness was shown to increase with the local Taylor factor. TEM observations and a well-known dislocation hardening model were used to confirm the equivalence between hardness values and the stored energy of cold work. A definite correlation between stored energy and Taylor factors could therefore be established, being more consistent than previous data reported in the literature. The improvement was thought to be related to the rather small plastic deformation, during which Taylor factors could be considered to remain constant. (c) 2006 Elsevier B.V. All rights reserved.

Influence of alkaline extraction on the characteristics of humic substances in Brazilian soils

An investigation was made of the influence of alkaline extraction on the characteristics of humic substances extracted from Brazilian soil samples. Humic substances (HS) from seven different soils samples collected in Brazil were extracted using the procedure recommended by the International Humic Substances Society (IHSS). Soils, HS and humins were characterized by thermogravimetry and differential thermal analysis. About 8 mg of each material (soil, HS and humin) were placed in a platinum crucible and heated continuously from 20 to 750 degrees C at a heating rate of 10 degrees C min(-1) in an atmosphere of synthetic air (100 ml min(-1)). A thermal analysis revealed a difference between the content and structural characteristics of organic matter present in HS and humin fractions in relation to their soils. The results indicated that alkaline extraction alters the characteristics of humic substances during the extraction process, underlining the importance of developing methodologies and analytical procedures that allow organic matter in soils to be studied without extracting it. (c) 2005 Elsevier B.V. All rights reserved.

Adubação nitrogenada no consórcio de milho com duas espécies de braquiária em sistema plantio direto

O objetivo deste trabalho foi avaliar a produtividade de grãos e de forragem do consórcio entre milho e espécies de braquiária (safras de 2008/2009 e 2009/2010), submetidos a doses de nitrogênio em cobertura, em sistema plantio direto. Utilizou-se o delineamento experimental inteiramente casualizado, com quatro repetições, em arranjo fatorial 2x5, com duas espécies de braquiária (Urochloa brizantha 'Xaraés' e U. ruziziensis) e cinco doses de N aplicadas em cobertura: 0, 50, 100, 150 e 200 kg ha‑1. Foram avaliados: leituras indiretas do teor foliar de clorofila (índice de clorofila Falker, ICF), teores de macronutrientes foliares, componentes da produção e produtividade de grãos do milho, e produtividade de matéria seca das forrageiras após o consórcio. Constatou-se que a espécie U. ruziziensis foi a mais competitiva com o milho em consórcio, o que proporcionou menores teores nutricionais e ICF nas duas safras analisadas. O crescimento vegetativo, os componentes da produção e a produtividade de grãos do milho não foram influenciados pelos consórcios. A adubação nitrogenada em cobertura aumenta linearmente o ICF, os teores de N, P e S, bem como os componentes da produção e a produtividade de grãos.

Uso de etil-trinexapac em cultivares de arroz de terras altas

O acamamento de plantas em cultivares de arroz, no momento da colheita, acarreta perdas significativas à produtividade. O uso de reguladores vegetais é uma das alternativas para reduzir o acamamento, entretanto, as informações sobre este assunto ainda são escassas. Este trabalho foi desenvolvido com o objetivo de avaliar o uso de doses de etil-trinexapac (0 g ha-1, 50 g ha-1, 100 g ha-1, 150 g ha-1 e 200 g ha-1 do i.a.), aplicadas por ocasião da diferenciação floral, em cultivares de arroz com diferentes tipos de plantas (Caiapó - tradicional; BRS Primavera e BRS Soberana - intermediário; e IAC 202 - moderno), avaliando o desenvolvimento e a produtividade de grãos. O experimento foi desenvolvido no município de Selvíria (MS), durante o ano agrícola de 2007/2008. Concluiu-se que a aplicação de 50 g ha-1, 100 g ha-1 e 150 g ha-1 de etil-trinexapac, por ocasião da diferenciação do primórdio da panícula das cultivares Caiapó, BRS Soberana e BRS Primavera, respectivamente, reduziu a altura de plantas e proporcionou ausência de acamamento; a cultivar IAC 202 dispensou o uso de regulador de crescimento, considerando-se que a mesma praticamente não apresentou acamamento; a aplicação de 50 g ha-1 e 150 g ha-1 de etil-trinexapac, por ocasião da diferenciação do primórdio da panícula, melhorou a produtividade da cultivar Caiapó e BRS Primavera, respectivamente, e a dose de 100 g ha-1 interferiu pouco na cultivar BRS Soberana.

Síntese de catalisadores nanoporosos na ausência total e parcial de direcionadores orgânicos para pirólise catalítica de óleos pesados e intermediários

The processing of heavy oil produced in Brazil is an emergency action and a strategic plan to obtain self-sufficiency and economic surpluses. Seen in these terms, it is indispensable to invest in research to obtain new catalysts for obtaining light fraction of hydrocarbons from heavy fractions of petroleum. This dissertation for the degree of Doctor of Philosophy reports the materials preparation that combine the high catalytic activity of zeolites with the greater accessibility of the mesoporosity, more particularly the HZSM-5/MCM-41 hybrid, done by synthesis processes with less environmental impact than conventional ones. Innovative methodologies were developed for the synthesis of micro-mesoporous hybrid material by dual templating mechanism and from crystalline zeolitic aluminosilicate in the absence of organic template. The synthesis of hybrid with pore bimodal distribution took place from one-single organic directing agent aimed to eliminate the use of organic templates, acids of any kind or organic solvents like templating agent of crystalline zeolitic aluminosilicate together with temperature-programmed microwave-assisted, making the experimental procedures of preparation most practical and easy, with good reproducibility and low cost. The study about crystalline zeolitic aluminosilicate in the absence of organic template, especially MFI type, is based on use of H2O and Na+ cation playing a structural directing role in place of an organic template. Advanced characterization techniques such as X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Highresolution Transmission Electron Microscopy (HRTEM), Adsorption of N2 and CO2, kinetic studies by Thermogravimetric Analysis (TGA) and Pyrolysis coupled to Gas Chromatography/Mass Spectrometry (Pyrolysis-GC/MS) were employed in order to evaluate the synthesized materials. Achieve the proposed objectives, has made available a set of new methodologies for the synthesis of zeolite and hybrid micro-mesoporous material, these suitable for catalytic pyrolysis of heavy oils aimed at producing light fraction