Relatório de estágio de educação física realizado na Escola Básica dos 2º e 3º Ciclos dos Louros

O presente relatório tem por objetivo descrever, justificar e refletir sobre o processo relativo ao estágio realizado na Escola dos 2.º e 3.º Ciclos dos Louros no ano letivo de 2011/2012 e que teve como principal alvo uma turma de 6.ºano de escolaridade. Durante o ano letivo várias foram as atividades realizadas com vista a criar condições potenciadoras da nossa aprendizagem e consequente desenvolvimento de conhecimento e competências a vários níveis. A atividade com maior expressão foi a Prática Letiva. Esta procurou potenciar todo o processo de ensino e aprendizagem tendo por base os alunos constituintes da turma. A Caraterização da Turma foi uma tarefa bastante importante pois deu a conhecer os alunos de forma a desenvolvermos um planeamento adequado aos mesmos. Mais concretamente, a partir desta pudemos desenvolver o estudo de caso e a Atividade de Extensão Curricular. Fruto da caraterização da escola surgiu a temática para a Ação Científico- Pedagógica Individual e a Atividade de Intervenção na Comunidade Escolar. Do ambiente docente observado, traçámos o tema para a Ação Científico-Pedagógica coletiva. O processo de estágio foi uma etapa gratificante que contribuiu para o nosso crescimento pessoal e profissional. Este revelou ser o início de uma etapa de formação junto do contexto real de ação, no qual desenvolveremos e procuraremos superar a cada dia que passe as dificuldades que surgirem, através da aquisição de novos conhecimentos e competências.

Caracterização de revestimentos de edifícios antigos

Como é de conhecimento geral as argamassas de revestimento antigas diferem das argamassas atuais, tanto na sua produção, como nos seus constituintes e até na sua resistência e durabilidade. O presente trabalho surge com o principal intuito de dissertar sobre a caraterização de algumas argamassas de revestimento e de enchimento antigas na Região Autónoma da Madeira. Desta forma foram realizados vários ensaios como a difração de raios X, a análise termogravimétrica, a determinação da percentagem do resíduo insolúvel com ataque àcido e a análise granulométrica, podendo assim ficar-se com uma ideia dos seus minerais, a quantidade de carbonato de cálcio utilizada, a quantidade de material insolúvel no ácido clorídrico e a granulometria (tamanho/dimensões) das areias. A escolha das amostras baseou-se nos critérios de maior longevidade dos edifícios, a não reabilitação destes e a possibilidade da realização do estudo dessas habitações (i.e. acessibilidade física e legal). Quanto aos ensaios efetuados, a opção de os ter utilizado prende-se com as técnicas disponíveis no Laboratório Regional de Engenharia Civil (LREC).

Betões especiais: aplicações em edifícios

Atualmente o betão é o material estrutural mais utilizado a nível mundial no âmbito da construção civil. É composto por água, agregados grossos e finos, com ou sem adjuvantes, cimento e adições. Atendendo ao facto de a sua utilização ter vindo a ser bastante significativa, ao mesmo tempo torna-se uma solução dispendiosa, dada a presença de alguns dos seus constituintes, principalmente o cimento Portland. O aparecimento de novos componentes, capazes de substituírem parte do cimento e de aumentarem as capacidades do betão para responder às expectativas, nomeadamente, as adições e adjuvantes, induziram ao surgimento de betões mais resistentes, duradouros e capazes de responderem melhor às condições que lhes são exigidas em projeto. Neste contexto, desenvolveu-se o presente trabalho, com o objetivo de estudar as soluções em betão com maior viabilidade económica. Ao longo do presente estudo, pretende-se avaliar a possibilidade de recorrer à utilização de betões especiais para a construção de alguns elementos estruturais de edifícios. Nesta perspetiva, numa fase inicial do trabalho, apresenta-se uma breve introdução histórica sobre a evolução do betão, desde a sua descoberta até à atualidade, e, em seguida, discutem-se as vantagens e as desvantagens referentes a cada betão quando aplicado em diferentes elementos estruturais. Posteriormente, é feita uma breve análise, comparação e discussão de resultados referentes aos custos atualmente praticados em Portugal Continental e na Ilha da Madeira relativos a cada tipo de betão. A dissertação termina com a análise dos resultados obtidos.

Reabilitação de habitações do Imaculado Coração de Maria, concelho do Funchal

A presente dissertação baseou-se num estudo de reabilitação, a custos controlados, para obras de melhoramento em habitações degradadas na Freguesia do Imaculado Coração de Maria, Concelho do Funchal. Este trabalho resulta da colaboração num projeto denominado “UMa Intervenção", projeto esse que consiste num programa de apoio a famílias carenciadas e com baixos rendimentos residentes na referida freguesia. Este projeto surge da colaboração dos seguintes intervenientes: Grupo de Engenharia Civil da UMa (GECUMa), Departamento da Pastoral do Ensino Superior da UMa (DPESUMa) e diracção autártica local. Esta colaboração consiste em elaborar um relatório técnico para cada habitação em estudo, que engloba várias tarefas e segue com a seguinte ordenação: inicia com uma visita à habitação a fim de se fazer o levantamento do estado de degradação em que esta se encontra e tirar medições para posteriormente estimar as quantidades de materiais necessários para as obras de melhoramento. De seguida, com base nos dados recolhidos durante a visita, são estudadas e apresentadas soluções para reparação das patologias identificadas, sendo indicadas várias soluções alternativas à resolução de cada problema, são calculadas as quantidades necessárias dos materiais e são consultados vários fornecedores, a fim de estimar o custo de cada solução, incluindo somente o custo dos materiais, uma vez que é objetivo angariar a mão-de-obra através de voluntariado. Finalmente, para estimar o custo final das obras de melhoramento, o estudo centra-se na solução que se considera mais adequada, por ser de execução mais simples e mais económica, tendo em conta os limitados meios disponíveis, nomeadamente a falta de equipamentos e de mão-de-obra especializada. A isto soma-se a muito limitada disponibilidade financeira, que consistiu a mais forte limitação à proposta de soluções de melhoramento.

Ampliando o acesso livre a informação: a digitalização do acervo do Núcleo Temático da Seca

FREIRE, Isa Maria, et al. Ampliando o acesso livre a informaçao: a digitalizaçao do acervo do Nucleo Tematico da Seca. Pesquisa Brasileira em Ciência da Informação e Biblioteconomia, v.3, n.2, p. 137-142, 2008.Disponivel em: dex.php/pbcib/index>. Acesso em: 04 nov. 2010.

Otimização de uma metodologia para análise mineralógica racional de argilominerais

VARELA, M.L. et al. Otimização de uma metodologia para análise mineralógica racional de argilominerais. Cerâmica, São Paulo, n. 51, p. 387-391, 2005.

Inserção de fornecedores locais como fonte de desempenhos em custos de transação e legitimidade: estudo de caso na cadeia produtiva do petróleo e gás do Rio Grande do Norte

The inclusion of local suppliers in production chains has considerable impact on its performance, but most notably in its main actors. The results of this process may be of different kinds and can be analyzed from economic or institutional approaches. This study aimed to verify the existence of different performances of Petrobras due to the inclusion of local suppliers in the oil and gas production chain in the state of Rio Grande do Norte, from the viewpoints of transaction costs and the Institutional Theory. In order to this, were made the characterization of the PROMINP, the description of its actions and results, the mapping of its institutional context of reference, and identification of results obtained by Petrobras in terms of transaction costs and legitimacy. The theoretical framework is based on authors dealing with industrial concentration, as like Marshall, Krugman, Porter and Schmitz, from the sociological perspective of neoinstitucional theory, as like DiMaggio and Powell and Scott and Meyer, and transaction costs, as like Williamson. This is a qualitative research, with data collection done by consulting secondary fonts and semi-structured interviews with nineteen actors of three groups, namely: actors involved in actions of the program, representatives of enterprises and representative of Petrobras. To analyze the content was used the Suchman s model (1995) for categories associated with strategies of legitimation and fourteen variables associated with the three variables assets specificity, bounded rationality and opportunism (Williamson, 1995, 1989) in the case of transaction costs. The results indicate that PROMINP has achieved its objectives by encouraging the increased participation of local companies in the oil and gas production chain, reflecting in the economic development of the state. The Redepetro/RN, fostered and built upon the interaction of the participants, is presented as a solution of continuity to the participation of enterprises in the chain, after the closure of the actions of the program. PROMINP demands responses to coercive, legislative and regulatory pressures of the organizational field, whose institutional context of reference is wide. From the point of view of legitimacy, through strategies to gain cognitive legitimacy and maintaining pragmatic legitimacy, Petrobras can manipulate the environment, ensuring the compliance of the constituents to their technical and institutional demands. Enterprises, in turn, respond to the demands through compliance with technical demands, mainly through the certification of processes, and cultural changes. There aren t clear gains related to the transaction costs, however, gains in legitimacy can be seen as a cumulative capital that can serve as a competitive differential that generates economic gains. In terms of theoretical findings, it was found that, due to its explanatory power for actions that are difficult to explain only in economic terms, Institutional Theory may be used as theoretical support concurrent with other theories. TCE model has limitations in explaining the program actions. In the case, it s emphasized that Petrobras doesn t seek only economic efficiency, but has in its mission the commitment to social development.

O Plano Diretor como instrumento de gestão da cidade: o caso da cidade de Fortaleza/CE

According to article 182 of the Brazilian Federal Constitution, cities should perform social function, what brings the concept that the city should be a place for one to live well. For that to happen, it should be well administered by its public managers. However, so that there is a sound administration, one that really performs that social function, there must be, first, an efficient planning. We understand that such a thing occurs when the master plan is the main planning instrument of a city and serves as basis for its administration. We notice, however, that in most of the cities the master plan is formulated as a law that regulates urban planning but that both the population and the government most of the times are not aware of its importance concerning the relevant issues related to municipal administration, such as its relationship with the economy, taxation, the social issue, land use regulation, and, in summary, with all the aspects that constitute and that a municipal government should manage in the best possible way. One also knows that, in general, the attempt of city planning has always been connected to the duration of a mandate and that way public managers many times implement restricted measures aiming to just attain a political-electoral objective and publicizing their administration. That implies actions and works that in some cases have negative impacts or ones that cannot be removed from the cities. This study intends to show that the master plan should be the planning instrument guiding the municipal administration but that, however, what we note is a lack of connection between that instrument and the government guidelines of the municipal managers. In order to study what happens to the cities that have a planning which is not taken into account in its administration, we will use the city of Fortaleza, capital of the State of Ceará as a case study. Historically, in Fortaleza the public managers have seldom decided to administer the city in according to the master plans developed for it. We should emphasize that planning begins in the city quite late and until the current days it is being substituted by temporary measures. Through the analysis of the planning process and of the urban management of the city of Fortaleza, especially the master plans predicted since 1933, we explain that if such plans had been implemented, they could have been important tools for its administration to attain a social function, becoming therefore a place for one to live well

Diagnóstico ecotoxicológico dos efluentes lançados no complexo estuarino do Jundiaí/Potengi, Natal/RN

Untreated effluents that reach surface water affect the aquatic life and humans. This study aimed to evaluate the wastewater s toxicity (municipal, industrial and shrimp pond effluents) released in the Estuarine Complex of Jundiaí- Potengi, Natal/RN, through chronic quantitative e qualitative toxicity tests using the test organism Mysidopsis Juniae, CRUSTACEA, MYSIDACEA (Silva, 1979). For this, a new methodology for viewing chronic effects on organisms of M. juniae was used (only renewal), based on another existing methodology to another testorganism very similar to M. Juniae, the M. Bahia (daily renewal).Toxicity tests 7 days duration were used for detecting effects on the survival and fecundity in M. juniae. Lethal Concentration 50% (LC50%) was determined by the Trimmed Spearman-Karber; Inhibition Concentration 50% (IC50%) in fecundity was determined by Linear Interpolation. ANOVA (One Way) tests (p = 0.05) were used to determinate the No Observed Effect Concentration (NOEC) and Low Observed Effect Concentration (LOEC). Effluents flows were measured and the toxic load of the effluents was estimated. Multivariate analysis - Principal Component Analysis (PCA) and Correspondence Analysis (CA) - identified the physic-chemical parameters better explain the patterns of toxicity found in survival and fecundity of M. juniae. We verified the feasibility of applying the only renewal system in chronic tests with M. Juniae. Most efluentes proved toxic on the survival and fecundity of M. Juniae, except for some shrimp pond effluents. The most toxic effluent was ETE Lagoa Aerada (LC50, 6.24%; IC50, 4.82%), ETE Quintas (LC50, 5.85%), Giselda Trigueiro Hospital (LC50, 2.05%), CLAN (LC50, 2.14%) and COTEMINAS (LC50, IC50 and 38.51%, 6.94%). The greatest toxic load was originated from ETE inefficient high flow effluents, textile effluents and CLAN. The organic load was related to the toxic effects of wastewater and hospital effluents in survival of M. Juniae, as well as heavy metals, total residual chlorine and phenols. In industrial effluents was found relationship between toxicity and organic load, phenols, oils and greases and benzene. The effects on fertility were related, in turn, with chlorine and heavy metals. Toxicity tests using other organisms of different trophic levels, as well as analysis of sediment toxicity are recommended to confirm the patterns found with M. Juniae. However, the results indicate the necessity for implementation and improvement of sewage treatment systems affluent to the Potengi s estuary

Comunidades zooplanctônicas como bioindicadoras da qualidade da água de quatro reservatórios da região semi-árida do Rio Grande do Norte

The response of zooplankton assemblages to variations in the water quality of four man-made lakes, caused by eutrophication and siltation, was investigated by means of canonical correspondence analysis. Monte Carlo simulations using the CCA eingenvalues as test statistics revealed that changes in zooplankton species composition along the environmental gradients of trophic state and abiogenic turbidity were highly significant. The species Brachionus calyciflorus, Thermocyclops sp. and Argyrodiaptomus sp. were good indicators of eutrophic conditions while the species Brachionus dolabratus, Keratella tropica and Hexarthra sp. were good indicators of high turbidity due to suspended sediments. The rotifer genus Brachionus was the most species-rich taxon, comprising five species which were associated with different environmental conditions. Therefore, we tested whether this genus alone could potentially be a better biological indicator of these environmental gradients than the entire zooplankton assemblages or any other random set of five species. The ordination results show that the five Brachionus species alone did not explain better the observed pattern of environmental variation than most random sets of five species. Therefore, this genus could not be selected as a target taxon for more intensive environmental monitoring as has been previously suggested by Attayde and Bozelli (1998). Overall, our results show that changes in the water quality of man-made lakes in a tropical semi-arid region have significant effects on the structure of zooplankton assemblages that can potentially affect the functioning of these ecosystems

Estudo da moagem de alta energia e sinterização de pós compósitos W-Cu

The Tungsten/copper composites are commonly used for electrical and thermal objectives like heat sinks and lectrical conductors, propitiating an excellent thermal and electrical conductivity. These properties are dependents of the composition, crystallite size and production process. The high energy milling of the powder of W-Cu produces an dispersion high and homogenization levels with crystallite size of W very small in the ductile Cu phase. This work discusses the effect of the HEM in preparation of the W-25Cu composite powders. Three techniques of powder preparation were utilized: milling the dry with powder of thick Cu, milling the dry with powder of fine Cu and milling the wet with powder of thick Cu. The form, size and composition of the particles of the powders milled were observed by scanning electron microscopy (SEM). The X-ray diffraction (XRD) was used to analyse the phases, lattice parameters, size and microstrain of the crystallite. The analyse of the crystalline structure of the W-25Cu powders milled made by Rietveld Method suggests the partial solid solubility of the constituent elements of the Cu in lattice of the W. This analyse shows too that the HEM produces the reduction high on the crystallite size and the increase in the lattice strain of both phases, this is more intense in the phase W

Análise e avaliação dos elementos de penetração no solo de equipamentos rodoviários após revestimento

The main objective is to analyze the abrasive wear resistance to the low stress of the elements that make up the organs of road machinery that are exposed directly to contact with abrasives. These samples were analyzed after these elements are coated superficially by the process of welding electrode coated with (SAER) and the manual process of coating type LVOF thermal spraying. As well, is to provide suggestions for a better recovery and return of these elements, which are reducing costs and avoiding downtime in the fronts of service. The samples were made from a substrate of carbon ABNT 1045 tempered steel, following the same specifications and composition of metals and alloys of constituents was followed the standard governing the dimensions of these samples and in accordance with the corresponding size. The results were evaluated by testing the hardness, abrasion resistance to wear by the low stress and the loss of volume involving the microstructure of coatings analyzed

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Aproveitamento da fibra do epicarpo do coco babaçu em compósito com matriz epóxi: estudo do efeito do tratamento da fibra

Nowadays the environmental issues are increasingly highlighted since the future of humanity is dependent on the actions taken by man. Major efforts are being expended in pursuit of knowledge and alternatives to promote sustainable development without compromising the environment. In recent years there has been a marked growth in the development of reinforced composite fiber plants, as an alternative for economic and ecological effects, especially in the substitution of synthetic materials such as reinforcement material in composites. In this current study the chemical- physical or (thermophysics )characteristics of the babassu coconut fiber, derived from the epicarp of the fruit (Orbignyda Phalerata), which the main constituents of the fiber: Klason lignin, insoluble, cellulose, holocellulose, hemicellulose and the content of ash and moisture will be determined. A study was conducted about the superficial modification of the fibers of the epicarp babassu coconut under the influence of chemical treatment by alkalinization, in an aqueous solution of NaOH to 2.5% (m/v) and to 5.0% to improve the compatibility matrix / reinforcement composite with epoxy matrix. The results of the changes occurred in staple fibers through the use of the techniques of thermogravimetric analyses (TG) and differential scanning calorimetry (DSC). The results found on thermal analysis on samples of fiber without chemical treatment (alkalinities), and on fiber samples treated by alkalinization show that the proposed chemical treatment increases the thermal stability of the fibers and provides a growth of the surface of area fibers, parameters that enhance adhesion fiber / composite. The findings were evaluated and compared with published results from other vegetable fibers, showing that the use of babassu coconut fibers has technical and economic potential for its use as reinforcement in composites

Síntese e caracterização de peneiras moleculares mesoporosas do tipo MCM-41 e AlMCM-41 a partir de fontes alternativas de sílica e de alumínio

The mesoporous molecular sieves of MCM-41 and AlMCM-41 type are considered as promising support for metal in the refining processes of petroleum-based materials as catalysts and adsorbents for environmental protection. In this work the molecular sieves MCM-41 and AlMCM-41 were synthesized by replacing the source of silica conventionally used, for quartz, an alternative and abundant, and the use of waste from the production of diatomaceous earth, an aluminum-silicate, as a source aluminum, due to abundant reserves of diatomaceous earth in the state of Rio Grande do Norte in the city of Ceará-Mirim, with the objective of producing high-value materials that have similar characteristics to traditional commercial catalysts in the market. These materials were synthesized by the method of hydrothermal synthesis at 100 º C for 7 days and subjected to calcination at 500 º C for 2 hours under flow of nitrogen and air. The molecular sieves were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and thermogravimetric analysis (TG), adsorption of N2 (BET and BJH methods), spectroscopy in the infra red (FTIR), microscopy scanning electron (SEM) and transmission electron microscopy (TEM). The analysis indicated that the synthesized materials showed characteristic hexagonal structure of mesopores materials with high specific surface area and sort and narrow distribution of size of pores