Non-peaky signals in wideband fading channels: achievable bit rates and optimal bandwidth

In the context of fading channels it is well established that, with a constrained transmit power, the bit rates achievable by signals that are not peaky vanish as the bandwidth grows without bound. Stepping back from the limit, we characterize the highest bit rate achievable by such non-peaky signals and the approximate bandwidth where that apex occurs. As it turns out, the gap between the highest rate achievable without peakedness and the infinite-bandwidth capacity (with unconstrained peakedness) is small for virtually all settings of interest to wireless communications. Thus, although strictly achieving capacity in wideband fading channels does require signal peakedness, bit rates not far from capacity can be achieved with conventional signaling formats that do not exhibit the serious practical drawbacks associated with peakedness. In addition, we show that the asymptotic decay of bit rate in the absence of peakedness usually takes hold at bandwidths so large that wideband fading models are called into question. Rather, ultrawideband models ought to be used.

Historical Development and Applications of the EPIC and APEX Models, June 2005

The development of the field-scale Erosion Productivity Impact Calculator (EPIC) model was initiated in 1981 to support assessments of soil erosion impacts on soil productivity for soil, climate, and cropping conditions representative of a broad spectrum of U.S. agricultural production regions. The first major application of EPIC was a national analysis performed in support of the 1985 Resources Conservation Act (RCA) assessment. The model has continuously evolved since that time and has been applied for a wide range of field, regional, and national studies both in the U.S. and in other countries. The range of EPIC applications has also expanded greatly over that time, including studies of (1) surface runoff and leaching estimates of nitrogen and phosphorus losses from fertilizer and manure applications, (2) leaching and runoff from simulated pesticide applications, (3) soil erosion losses from wind erosion, (4) climate change impacts on crop yield and erosion, and (5) soil carbon sequestration assessments. The EPIC acronym now stands for Erosion Policy Impact Climate, to reflect the greater diversity of problems to which the model is currently applied. The Agricultural Policy EXtender (APEX) model is essentially a multi-field version of EPIC that was developed in the late 1990s to address environmental problems associated with livestock and other agricultural production systems on a whole-farm or small watershed basis. The APEX model also continues to evolve and to be utilized for a wide variety of environmental assessments. The historical development for both models will be presented, as well as example applications on several different scales.

Pathogen-induced hatching and population-specific life-history response to water-borne cues in brown trout (Salmo trutta)

Hatching is an important niche shift, and embryos in a wide range of taxa can either accelerate or delay this life-history switch in order to avoid stage-specific risks. Such behavior can occur in response to stress itself and to chemical cues that allow anticipation of stress. We studied the genetic organization of this phenotypic plasticity and tested whether there are differences among populations and across environments in order to learn more about the evolutionary potential of stress-induced hatching. As a study species, we chose the brown trout (Salmo trutta; Salmonidae). Gametes were collected from five natural populations (within one river network) and used for full-factorial in vitro fertilizations. The resulting embryos were either directly infected with Pseudomonas fluorescens or were exposed to waterborne cues from P. fluorescens-infected conspecifics. We found that direct inoculation with P. fluorescens increased embryonic mortality and induced hatching in all host populations. Exposure to waterborne cues revealed population-specific responses. We found significant additive genetic variation for hatching time, and genetic variation in trait plasticity. In conclusion, hatching is induced in response to infection and can be affected by waterborne cues of infection, but populations and families differ in their reaction to the latter.

Transcriptional and functional profiles of voltage-gated Na(+) channels in injured and non-injured DRG neurons in the SNI model of neuropathic pain.

Changes in expression and function of voltage-gated sodium channels (VGSC) in dorsal root ganglion (DRG) neurons may play a major role in the genesis of peripheral hyperexcitability that occurs in neuropathic pain. We present here the first description of changes induced by spared nerve injury (SNI) to Na(v)1 mRNA levels and tetrodotoxin-sensitive and -resistant (TTX-S/TTX-R) Na(+) currents in injured and adjacent non-injured small DRG neurons. VGSC transcripts were down-regulated in injured neurons except for Na(v)1.3, which increased, while they were either unchanged or increased in non-injured neurons. TTX-R current densities were reduced in injured neurons and the voltage dependence of steady-state inactivation for TTX-R was positively shifted in injured and non-injured neurons. TTX-S current densities were not affected by SNI, while the rate of recovery from inactivation was accelerated in injured neurons. Our results describe altered neuronal electrogenesis following SNI that is likely induced by a complex regulation of VGSCs.

PACIC Instrument: disentangling dimensions using published validation models.

OBJECTIVE: To better understand the structure of the Patient Assessment of Chronic Illness Care (PACIC) instrument. More specifically to test all published validation models, using one single data set and appropriate statistical tools. DESIGN: Validation study using data from cross-sectional survey. PARTICIPANTS: A population-based sample of non-institutionalized adults with diabetes residing in Switzerland (canton of Vaud). MAIN OUTCOME MEASURE: French version of the 20-items PACIC instrument (5-point response scale). We conducted validation analyses using confirmatory factor analysis (CFA). The original five-dimension model and other published models were tested with three types of CFA: based on (i) a Pearson estimator of variance-covariance matrix, (ii) a polychoric correlation matrix and (iii) a likelihood estimation with a multinomial distribution for the manifest variables. All models were assessed using loadings and goodness-of-fit measures. RESULTS: The analytical sample included 406 patients. Mean age was 64.4 years and 59% were men. Median of item responses varied between 1 and 4 (range 1-5), and range of missing values was between 5.7 and 12.3%. Strong floor and ceiling effects were present. Even though loadings of the tested models were relatively high, the only model showing acceptable fit was the 11-item single-dimension model. PACIC was associated with the expected variables of the field. CONCLUSIONS: Our results showed that the model considering 11 items in a single dimension exhibited the best fit for our data. A single score, in complement to the consideration of single-item results, might be used instead of the five dimensions usually described.

Explicit ruin formulas for models with dependence among risks

We show that a simple mixing idea allows one to establish a number of explicit formulas for ruin probabilities and related quantities in collective risk models with dependence among claim sizes and among claim inter-occurrence times. Examples include compound Poisson risk models with completely monotone marginal claim size distributions that are dependent according to Archimedean survival copulas as well as renewal risk models with dependent inter-occurrence times.

Detection of Optimal Models in Parameter Space with Support Vector Machines

The paper proposes an approach aimed at detecting optimal model parameter combinations to achieve the most representative description of uncertainty in the model performance. A classification problem is posed to find the regions of good fitting models according to the values of a cost function. Support Vector Machine (SVM) classification in the parameter space is applied to decide if a forward model simulation is to be computed for a particular generated model. SVM is particularly designed to tackle classification problems in high-dimensional space in a non-parametric and non-linear way. SVM decision boundaries determine the regions that are subject to the largest uncertainty in the cost function classification, and, therefore, provide guidelines for further iterative exploration of the model space. The proposed approach is illustrated by a synthetic example of fluid flow through porous media, which features highly variable response due to the parameter values' combination.

Bridging DSGE models and the raw data

A method to estimate DSGE models using the raw data is proposed. The approachlinks the observables to the model counterparts via a flexible specification which doesnot require the model-based component to be solely located at business cycle frequencies,allows the non model-based component to take various time series patterns, andpermits model misspecification. Applying standard data transformations induce biasesin structural estimates and distortions in the policy conclusions. The proposed approachrecovers important model-based features in selected experimental designs. Twowidely discussed issues are used to illustrate its practical use.

The Soil and Water Assessment Tool:Historical Development, Applications, and Future Research Directions, 2007

The Soil and Water Assessment Tool (SWAT) model is a continuation of nearly 30 years of modeling efforts conducted by the U.S. Department of Agriculture (USDA), Agricultural Research Service. SWAT has gained international acceptance as a robust interdisciplinary watershed modeling tool, as evidenced by international SWAT conferences, hundreds of SWAT-related papers presented at numerous scientific meetings, and dozens of articles published in peer-reviewed journals. The model has also been adopted as part of the U.S. Environmental Protection Agency’s BASINS (Better Assessment Science Integrating Point & Nonpoint Sources) software package and is being used by many U.S. federal and state agencies, including the USDA within the Conservation Effects Assessment Project. At present, over 250 peer-reviewed, published articles have been identified that report SWAT applications, reviews of SWAT components, or other research that includes SWAT. Many of these peer-reviewed articles are summarized here according to relevant application categories such as streamflow calibration and related hydrologic analyses, climate change impacts on hydrology, pollutant load assessments, comparisons with other models, and sensitivity analyses and calibration techniques. Strengths and weaknesses of the model are presented, and recommended research needs for SWAT are provided.

Testing calibrated general equilibrium models

This paper illustrates the philosophy which forms the basis of calibrationexercises in general equilibrium macroeconomic models and the details of theprocedure, the advantages and the disadvantages of the approach, with particularreference to the issue of testing ``false'' economic models. We provide anoverview of the most recent simulation--based approaches to the testing problemand compare them to standard econometric methods used to test the fit of non--lineardynamic general equilibrium models. We illustrate how simulation--based techniques can be used to formally evaluate the fit of a calibrated modelto the data and obtain ideas on how to improve the model design using a standardproblem in the international real business cycle literature, i.e. whether amodel with complete financial markets and no restrictions to capital mobility is able to reproduce the second order properties of aggregate savingand aggregate investment in an open economy.

Aplicação dos Sistemas de Informação Geográfica em Estudos de Caracterização Biofísica da Ilha de Santo Antão em Cabo Verde

Com características morfológicas e edafo-climáticas extremamente diversificadas, a ilha de Santo Antão em Cabo Verde apresenta uma reconhecida vulnerabilidade ambiental a par de uma elevada carência de estudos científicos que incidam sobre essa realidade e sirvam de base à uma compreensão integrada dos fenómenos. A cartografia digital e as tecnologias de informação geográfica vêm proporcionando um avanço tecnológico na colecção, armazenamento e processamento de dados espaciais. Várias ferramentas actualmente disponíveis permitem modelar uma multiplicidade de factores, localizar e quantificar os fenómenos bem como e definir os níveis de contribuição de diferentes factores no resultado final. No presente estudo, desenvolvido no âmbito do curso de pós-graduação e mestrado em sistemas de Informação geográfica realizado pela Universidade de Trás-os-Montes e Alto Douro, pretende-se contribuir para a minimização do deficit de informação relativa às características biofísicas da citada ilha, recorrendo-se à aplicação de tecnologias de informação geográfica e detecção remota, associadas à análise estatística multivariada. Nesse âmbito, foram produzidas e analisadas cartas temáticas e desenvolvido um modelo de análise integrada de dados. Com efeito, a multiplicidade de variáveis espaciais produzidas, de entre elas 29 variáveis com variação contínua passíveis de influenciar as características biofísicas da região e, possíveis ocorrências de efeitos mútuos antagónicos ou sinergéticos, condicionam uma relativa complexidade à interpretação a partir dos dados originais. Visando contornar este problema, recorre-se a uma rede de amostragem sistemática, totalizando 921 pontos ou repetições, para extrair os dados correspondentes às 29 variáveis nos pontos de amostragem e, subsequente desenvolvimento de técnicas de análise estatística multivariada, nomeadamente a análise em componentes principais. A aplicação destas técnicas permitiu simplificar e interpretar as variáreis originais, normalizando-as e resumindo a informação contida na diversidade de variáveis originais, correlacionadas entre si, num conjunto de variáveis ortogonais (não correlacionadas), e com níveis de importância decrescente, as componentes principais. Fixou-se como meta a concentração de 75% da variância dos dados originais explicadas pelas primeiras 3 componentes principais e, desenvolveu-se um processo interactivo em diferentes etapas, eliminando sucessivamente as variáveis menos representativas. Na última etapa do processo as 3 primeiras CP resultaram em 74,54% da variância dos dados originais explicadas mas, que vieram a demonstrar na fase posterior, serem insuficientes para retratar a realidade. Optou-se pela inclusão da 4ª CP (CP4), com a qual 84% da referida variância era explicada e, representando oito variáveis biofísicas: a altitude, a densidade hidrográfica, a densidade de fracturação geológica, a precipitação, o índice de vegetação, a temperatura, os recursos hídricos e a distância à rede hidrográfica. A subsequente interpolação da 1ª componente principal (CP1) e, das principais variáveis associadas as componentes CP2, CP3 e CP4 como variáveis auxiliares, recorrendo a técnicas geoestatística em ambiente ArcGIS permitiu a obtenção de uma carta representando 84% da variação das características biofísicas no território. A análise em clusters validada pelo teste “t de Student” permitiu reclassificar o território em 6 unidades biofísicas homogéneas. Conclui-se que, as tecnologias de informação geográfica actualmente disponíveis a par de facilitar análises interactivas e flexíveis, possibilitando que se faça variar temas e critérios, integrar novas informações e introduzir melhorias em modelos construídos com bases em informações disponíveis num determinado contexto, associadas a técnicas de análise estatística multivariada, possibilitam, com base em critérios científicos, desenvolver a análise integrada de múltiplas variáveis biofísicas cuja correlação entre si, torna complexa a compreensão integrada dos fenómenos.

Ecological niche models and patterns of richness and endemism of the southern Andean genus Eurymetopum (Coleoptera, Cleridae)

Eurymetopum is an Andean clerid genus with 22 species. We modeled the ecological niches of 19 species with Maxent and used them as potential distributional maps to identify patterns of richness and endemicity. All modeled species maps were overlapped in a single map in order to determine richness. We performed an optimality analysis with NDM/VNDM in a grid of 1º latitude-longitude in order to identify endemism. We found a highly rich area, located between 32º and 41º south latitude, where the richest pixels have 16 species. One area of endemism was identified, located in the Maule and Valdivian Forest biogeographic provinces, which extends also to the Santiago province of the Central Chilean subregion, and contains four endemic species (E. parallelum, E. prasinum, E. proteus, and E. viride), as well as 16 non-endemic species. The sympatry of these phylogenetically unrelated species might indicate ancient vicariance processes, followed by episodes of dispersal. Based on our results, we suggest a close relationship between these provinces, with the Maule representing a complex area.

Multiple filtering devices for the estimation of cyclical DSGE models

We propose a method to estimate time invariant cyclical DSGE models using the informationprovided by a variety of filters. We treat data filtered with alternative procedures as contaminated proxies of the relevant model-based quantities and estimate structural and non-structuralparameters jointly using a signal extraction approach. We employ simulated data to illustratethe properties of the procedure and compare our conclusions with those obtained when just onefilter is used. We revisit the role of money in the transmission of monetary business cycles.

Subsampling inference in threshold autoregressive models

This paper discusses inference in self exciting threshold autoregressive (SETAR)models. Of main interest is inference for the threshold parameter. It iswell-known that the asymptotics of the corresponding estimator depend uponwhether the SETAR model is continuous or not. In the continuous case, thelimiting distribution is normal and standard inference is possible. Inthe discontinuous case, the limiting distribution is non-normal and cannotbe estimated consistently. We show valid inference can be drawn by theuse of the subsampling method. Moreover, the method can even be extendedto situations where the (dis)continuity of the model is unknown. In thiscase, also the inference for the regression parameters of the modelbecomes difficult and subsampling can be used advantageously there aswell. In addition, we consider an hypothesis test for the continuity ofthe SETAR model. A simulation study examines small sample performance.

Partial melting of basic dykes in the contact aureoles of two shallow-level, gabbro-pyroxenite intrusions, Fuerteventura

THESIS ABSTRACT Low-pressure anatexis of basic dykes gave rise to unusual, zebra-like migmatites, in the contact metamorphic aureoles of two layered gabbro-pyroxenite intrusions, PXl and PX2, in the root zone of an ocean island, Fuerteventura Basal Complex (Canary Islands). This thesis focuses on the understanding of processes attributing to the partial melting and formation of these migmatites, characterised by a dense network of closely spaced, millimetre-wide leucocratic segregations with perfectly preserved igneous textures. The presence of fluids are required to decrease the solidus of basic igneous lithologies, to allow partial melting in such aloes-pressure (1-2 kb) environment. An oxygen isotope study was thus carried out on dykes inside and beyond the PX2 aureole, in order to decipher the nature and origin of such fluids. Low or negative δ18O values were obtained for whole rocks and mineral-separates, decreasing towards the contact, with the intrusion itself retaining fairly high values. This trend has been attributed to the advection of meteoric water during magma emplacement, with increasing fluid/rock ratios (higher dyke intensities towards the intrusion acting as fluid-pathways) and higher temperatures promoting increasing exchange during recrystallisation. A comparison of whole rock and mineral major- and trace- element data allowed the redistribution of elements .between different mineral phases and generations, during contact metamorphism and partial melting to be assessed. Certain trace-elements, e.g. Zr, Hf, Y, and REEs, were internally redistributed during contact metamorphic recrystallisation, causing- the enrichment of neocrystallised diopsides compared to relict phenocrysts. This has been assigned to the liberation of trace elements on the breakdown of primary minerals, kaersutite and sphene, on entering the thermal aureole. Major and trace element compositions of minerals in migmatite melanosomes and leucosomes are almost identical, pointing to a syn- or post- solidus reequilibration on cooling of the migmatite terrain. The mineralogical, textural and geochemical evolution of dykes in a contact metamorphic aureole, is recorded around an apophysis of the PX1 intrusion, where there is evidence of incipient partial melting. Hydrothermal mineral pseudomorphs in the outer parts of the aureole are progressively replaced by dry mineral assemblages, with increasingly recrystallised diopside and evidence of partial melting -the extent of which varies from one lithology to another. The appearance of more mafic lithologies towards the intrusion, with lower whole rock SiO2 and mobile element abundances, e.g. Rb, Cs, K, has been explained by the migration and accumulation of feldspathic material into leucosomes outside the samples. A micro-structural study of leucosomes and leucocratic pods, with the aid of high-resolution X-ray computed micro-tomography (HRXµCT), allowing the visualization and quantification of shapes and orientations, was carried out in order to better understand the processes of melt segregation in the PX1 aureole. Leucocratic pods, representing former amygdales, are considered as natural strain ellipsoids. Their short axes are oriented perpendicular to leucosome planes, which sub-parallel the intrusive contact. Leucosomes thus effectively represent foliation planes. This implies that the direction of maximum shortening, during migmatisation, was perpendicular to the orientation of leucosomes, contradicting earlier models that suggest leucosomes represent tension veins. RESUME DE LA THESE Un phénomène rare de fusion partielle de filons basiques à basse pression a été étudié dans les auréoles de contact de deux intrusions litées de gabbro-pyroxénite, PX1 et PX2, localisées dans le soubassement de l'île volcanique de Fuerteventura aux Canaries. Cette anatexie a engendré des migmatites finement zébrées d'aspect très inhabituel, dont les processus de formation ont été étudiés dans le présent travail. Ces roches sont caractérisées par un réseau dense de veinules leucocrates d'épaisseur millimétrique, dont les textures ignées sont parfaitement préservées. La fusion partielle de roches basiques à basse pression (1-2 kbar) requiert la présence d'eau afin d'abaisser le solidus du système à des températures géologiquement réalistes. Une étude comparative des isotopes de l'oxygène a ainsi été menée sur des filons respectivement affectés et non affectés par le métamorphisme de contact, afin de confirmer la présence de ces fluides, de déterminer l'importance de leur interaction avec les roches et leur origine. Des valeurs de δ180 basses ou négatives ont été mesurées sur roche totale et minéraux séparés, décroissantes en direction du contact, alors que l'intrusion elle-même a conservé des valeurs élevées. Ce gradient a été attribué à l'advection d'eau météorique durant la mise en place du magma, les températures les plus élevées favorisant d'autant plus la circulation des fluides et les échanges isotopiques durant la recristallisation des roches. Cette recristallisation engendré une redistribution chimique complète des éléments entre les différentes générations de minéraux résultant du métamorphisme de contact et de l'anatexie, mise en évidence par microanalyse. Certains éléments traces comme Zr, Hf, Y et les REE ont été concentrés dans le diopside néoformé consécutivement à la déstabilisation de minéraux primaires riches en ces éléments comme la kaersutite ou le sphène. Les compositions en éléments majeurs et traces des minéraux des mélanosomes et leucosomes des migmatites sont pratiquement identiques, indiquant une rééquilibration syn- à postsolidus lors du refroidissement de l'auréole de contact. La transformation progressive des filons basiques au niveau de leur minéralogie, textures et composition chimique a pu être observée en détail à l'approche du contact d'une apophyse de l'intrusion PX1. La paragenèse magmatique initiale n'est jamais préservée, les faciès les plus distants du contact étant constitués d'un assemblage pseudomorphique hydrothermal. Ce dernier est progressivement remplacé par des assemblages anhydres incluant du diopside néoformé, puis apparaissent les premiers signes de fusion partielle, dont l'importance varie fortement d'une lithologie à l'autre. L'apparition de faciès plus basiques en direction du contact, avec des teneurs réduites en SiO2 et en éléments incompatibles tels Rb, Cs, K, a été attribuée à l'échappement de leucosomes feldspathiques hors du système. Une étude microstructurale de la distribution spatiale du matériel leucocrate au sein des migmatites par microtomographie X de haute résolution (HRXµCT) a été menée pour mieux comprendre les processus de ségrégation des liquides dans l'auréole de PX1. De petites entités ovoïdes, représentant d'anciennes structures amygdalaires au sein des filons, ont été considérées comme des ellipsoïdes marqueurs de la déformation finie. Leur petit axe est orienté perpendiculairement aux plans définis par les leucosomes, eux-mêmes subparallèles au contact intrusif. Les leucosomes matérialisent donc des plans de clivage. Ainsi, la direction de raccourcissement maximum durant la fusion partielle était perpendiculaire à l'orientation des leucosomes, contrairement à ce qui a été dit dans de précédentes publications, qui suggéraient que les leucosomes représentaient des veines de tension. RESUME DE LA THESE (POUR LE GRAND PUBLIC) L'observation directe du soubassement d'une île volcanique est une occasion rare, accessible dans le «complexe de base » de l'île canarienne de Fuerteventura. Ce dernier a enregistré divers phénomènes magmatiques, métamorphiques et de fusion partielle induits par l'intrusion répétée de magmas alimentant des appareils volcaniques sus jacents, sous forme de petits plutons, essaims de filons et complexes annulaires de gabbros alcalins, pyroxénites, syénites et carbonatites. Dans ce contexte de flux de chaleur élevé, des filons basiques ont subi une fusion partielle au contact de deux intrusions de gabbro-pyroxénite, un phénomène extrêmement rare à une profondeur aussi réduite, estimée à quelque 3-6 km. Les produits de cette fusion partielle sont des liquides très riches en feldspath, concentrés en un réseau dense de veinules blanches (leucosomes) au sein du matériau résiduel sombre non fondu (mélanosome) pour former ce qu'on appelle des migmatites. Outre les aspects pétrologiques liés à la formation de ces migmatites, l'intérêt majeur du phénomène réside dans le fait qu'il puisse représenter la source des magmas évolués parfois observés sur les îles océaniques. A des pressions aussi faibles que dans le soubassement de Fuerteventura (1-2 Kbar), la présence de fluides abondants est nécessaire pour abaisser la température de début de fusion des roches (solidus) à des valeurs géologiquement réalistes. Des expériences ont montré que même en présence de plusieurs %-poids d'eau, une température de 1000°C était encore nécessaire pour obtenir une proportion de liquide équivalente à celle observée sur le terrain, soit 25%. Or les magmas alcalins des îles océaniques, bien qu'hydratés, n'en contiennent de loin pas autant, ce qui implique une source d'eau externe. Une étude isotopique de l'oxygène a été entreprise afin de tester cette hypothèse. Les valeurs obtenues en 5180 sont basses ou négatives et indiquent l'influence d'eau d'origine météorique. Cette eau de pluie se serait infiltrée le long des filons depuis la surface du volcan et les aurait complètement hydrothermalisés en profondeur (situation encore visible à l'extérieur de l'auréole de contact), leur permettant ainsi de stocker l'eau nécessaire à leur fusion partielle ultérieure. L'interaction entre eau de pluie et filons a été d'autant plus importante que ces derniers étaient proches du contact avec l'intrusion, ce qui suggère que la circulation de ces eaux et leur interaction avec les roches a été favorisée par la chaleur fournie par l'intrusion elle-même. Un autre aspect de ce travail s'est focalisé sur la redistribution des éléments traces au sein des minéraux des filons basiques durant le métamorphisme de contact et la fusion partielle. Ainsi, le pyroxène de seconde génération est-il sensiblement enrichi en traces telles Zr, Hf, Y et les terres rares, par rapport au pyroxène magmatique originel, en relation avec la déstabilisation de minéraux primaires riches en ces éléments tels le sphène et la kaersutite. Cependant, les compositions en éléments majeurs et traces des minéraux recristallisés des migmatites sont pratiquement les mêmes dans les leucosomes et les mélanosomes, suggérant une rééquilibration chimique complète durant le refroidissement de ces lithologies. Si certaines migmatites se sont comportées en système chimiquement fermé (hormis l'eau météorique), d'autres filons ont manifestement perdu une partie de leurs leucosomes, ainsi qu'en témoigne leur composition progressivement appauvrie en silice et autres éléments incompatibles mobiles, tels K et Rb à l'approche du contact de l'intrusion. Parallèlement à cette évolution chimique, les paragenèses hydrothermales distantes du contact sont progressivement remplacées par des paragenèses anhydres, puis par l'apparition des premiers leucosomes, tandis que les textures magmatiques initiales sont complètement effacées au profit d'une combinaison de textures magmatique dans les leucosomes et en mosaïque dans les mélanosomes. Enfin, la distribution spatiale des liquides de fusion partielle a été étudiée par microtomographie X de haute résolution, dans des filons contenant des entités ovoïdes leucocrates, sans doute d'anciennes amygdales à zéolites. Ces dernières ont été considérées comme des ellipsoïdes de la déformation finie. L'orientation de leur petit axe, perpendiculaire au plan défini par les veinules de leucosomes, indique que ces derniers représentent des plans de clivage perpendiculaires à la direction de raccourcissement maximum. Ainsi, la ségrégation des liquides de fusion partielle se serait faite dans les plans de compression et non dans des plans de dilatation, contrairement à ce que laisserait penser le sens commun.