Quichua-Spanish language contact in Salcedo, Ecuador: revisiting media lengua syncretic language practices

The purpose of the current thesis is to develop a better understanding of the interaction between Spanish and Quichua in the Salcedo region and provide more information for the processes that might have given rise to Media Lengua, a ‘mixed’ language comprised of a Quichua grammar and Spanish lexicon. Muysken attributes the formation of Media Lengua to relexification, ruling out any influence from other bilingual phenomena. I argue that the only characteristic that distinguishes Media Lengua from other language contact varieties in central Ecuador is the quantity of the overall Spanish borrowings and not the type of processes that might have been employed by Quichua speakers during the genesis of Media Lengua. The results from the Salcedo data that I have collected show how processes such as adlexification, code-mixing, and structural convergence produce Media Lengua-type sentences, evidence that supports an alternative analysis to Muysken’s relexification hypothesis. Overall, this dissertation is developed around four main objectives: (1) to describe the variation of Spanish loanwords within a bilingual community in Salcedo; (2) to analyze some of the prominent and recent structural changes in Quichua and Spanish; (3) to determine whether Spanish loanword use can be explained by the relationship consultants have with particular social categories; and (4) to analyze the consultants’ language ideologies toward syncretic uses of Spanish and Quichua. Overall, 58% of the content words, 39% of the basic vocabulary, and 50% of the subject pronouns in the Salcedo corpus were derived from Spanish. When compared to Muysken’s description of highlander Quichua in the 1970’s, Spanish loanwords have more than doubled in each category. The overall level of Spanish loanwords in Salcedo Quichua has grown to a level between highlander Quichua in the 1970’s and Media Lengua. Similar to Spanish’s lexical influence in Media Lengua, the increase of Spanish borrowings in today’s rural Quichua can be seen in non-basic and basic vocabularies as well as the subject pronoun system. Significantly, most of the growth has occurred through forms of adlexification i.e., doublets, well-established borrowings, and cultural borrowings, suggesting that ‘ordinary’ lexical borrowing is also capable of producing Media Lengua-type sentences. I approach the second objective by investigating two separate phenomena related to structural convergence. The first examines the complex verbal constructions that have developed in Quichua through Spanish loan translations while the second describes the type of Quichua particles that are attached to Spanish lexemes while speaking Spanish. The calquing of the complex verbal constructions from Spanish were employed when speaking standard Quichua. Since this standard form is typically used by language purists, I argue that their use of calques is a strategy of exploiting the full range of expression from Spanish without incorporating any of the Spanish lexemes which would give the appearance of ‘contamination’. The use of Quichua particles in local varieties of Spanish is a defining characteristic of Quichuacized Spanish, spoken most frequently by women and young children in the community. Although the use of Quichua particles was probably not the main catalyst engendering Media Lengua, I argue that its contribution as a source language to other ‘mixed’ varieties, such as Media Lengua, needs to be accounted for in descriptions of BML genesis. Contrary to Muysken’s representation of relatively ‘unmixed’ Spanish and Quichua as the two source languages of Media Lengua, I propose that local varieties of Spanish might have already been ‘mixed’ to a large degree before Media Lengua was created. The third objective attempts to draw a relationship between particular social variables and the use of Spanish loanwords. Whisker Boxplots and ANOVAs were used to determine which social group, if any, have been introducing new Spanish borrowings into the bilingual communities in Salcedo. Specifically, I controlled for age, education, native language, urban migration, and gender. The results indicate that none of the groups in each of the five social variables indicate higher or lower loanword use. The implication of these results are twofold: (a) when lexical borrowing occurs, it is immediately adopted as the community-wide norm and spoken by members from different backgrounds and generations, or (b) this level of Spanish borrowing (58%) is not a recent phenomenon. The fourth and final objective draws on my ethnographic research that addresses the attitudes of syncretic language use. I observed that Quichuacized Spanish and Hispanicized Quichua are highly stigmatized varieties spoken by the country’s most marginalized populations and families, yet within the community, syncretic ways of speaking are in fact the norm. It was shown that there exists a range of different linguistic definitions for ‘Chaupi Lengua’ and other syncretic language practices as well as many contrasting connotations, most of which were negative. One theme that emerged from the interviews was that speaking syncretic varieties of Quichua weakened the consultant’s claim to an indigenous identity. The linguistic and social data presented in this dissertation supports an alternative view to Muysken’s relexification hypothesis, one that has the advantage of operating with well-precedented linguistic processes and which is actually observable in the present-day Salcedo area. The results from the study on lexical borrowing are significant because they demonstrate how a dynamic bilingual speech community has gradually diversified their Quichua lexicon under intense pressure to shift toward Spanish. They also show that Hispanicized Quichua (Quichua with heavy lexical borrowing) clearly arose from adlexification and prolonged lexical borrowing, and is one of at least six identifiable speech styles found in Salcedo. These results challenge particular interpretations of language contact outcomes, such as, ones that depict sources languages as discrete and ‘unmixed.’ The bilingual continuum presented in this thesis shows on the one hand, the range of speech styles that are accessible to different speakers, and on the other hand, the overlapping, syncretic features that are shared among the different registers and language varieties. It was observed that syncretic speech styles in Salcedo are employed by different consultants in varied interactional contexts, and in turn, produce different evaluations by other fellow community members. In the current dissertation, I challenge the claim that relexification and Media Lengua-type sentences develop in isolation and without the influence of other bilingual phenomena. Based on Muysken's Media Lengua example sentences and the speech styles from the Salcedo corpus, I argue that Media Lengua may have arisen as an institutionalized variant of the highly mixed "middle ground" within the range of the Salcedo bilingual continuum discussed above. Such syncretic forms of Spanish and Quichua strongly resemble Media Lengua sentences in Muysken’s research, and therefore demonstrate how its development could have occurred through several different language contact processes and not only through relexification.

Mafic and felsic plutonism in the Elvas region (SW Iberia, Portugal): two distinct Nd isotope sources and geodynamics

The occurrence of mafic (mainly gabbros and diorites) and felsic (syenites and granites) rocks, in close spatial association, in the Elvas region, at the northern part of the Ossa-Morena Zone, could be interpreted as a single bimodal (alkaline) plutonic complex. However, in spite of scarce isotopic (Sm-Nd) data, the co-magmatic origin of both rock groups (mafic and felsic) has already been questioned [1]. Based on the mineral chemistry of primary clinopyroxenes (Di–Hd, %En: 45.5 – 27.2) and representative whole-rock analyses, gabbros and diorites of the Elvas massif show a transitional character between alkaline and non-alkaline fields and wide compositions: SiO2 (42.47 – 58.00 wt%); TiO2 (0.24 – 1.68 wt%); Y/Nb (4.0 – 10.7); Th (0.1 – 6.8 ppm); Zr (18.6 – 576.9 ppm). The felsic group is composed by highly differentiated rocks which correspond to distinct levels of silica saturation and alkalinity. Peralkaline syenites usually present sodic (riebeckite) and sodic-calcic (aegirine-augite, ferrowinchite) inosilicates and reveal quite variable compositions: SiO2 (57.50 – 72.07 wt%); TiO2 (0.10 – 1.45 wt%); Th (1.7 – 67.0 ppm); Zr (133.0 – 4800.0 ppm). The alkaline granites show hedenbergite as the characteristic inosilicate, presenting relatively common compositions: SiO2 (61.85 – 78.06 wt%); TiO2 (0.21 – 0.58 wt%); Th (11.8 – 38.4 ppm); Zr (317.3 – 1234.6 ppm) [2]. Recent Sm-Nd isotopic results, on a total of 18 whole-rock samples (6 mafites and 12 felsites), allow new and more consistent interpretation concerning the petrogenesis of these plutonic rocks. Assuming an age of 490 Ma [3], the felsic rocks provide (0.6 < Nd490 < 4.3), similar to other contemporary (per)alkaline rocks of this region [4], reflecting magmatic extractions from time-integrated depleted mantle sources followed by variable and incomplete mixing (and/or AFC-type) processes with enriched, probably crustal sources. This alkaline/peralkaline magmatism is thought to represent the main regional record of the rifting event which presumably led to the opening of the Rheic Ocean. On the other hand, the mafic plutonic rocks of the Elvas massif cannot represent the magmatic precursors of these syenites and granites as they show completely distinct Nd isotopic ratios (3.7 < Nd490 < 1.2) indicating important contribution of long-term enriched (crustal) sources. Instead, considering the age and the Nd isotopic signature of other mafic plutonic unit emplaced nearby (the Campo Maior massif: ca. 370 Ma; 6.0 < Nd370 < 5.2) [5], and recalculating the isotopic ratios of the Elvas massif for the same age (4.3 < Nd370 < 1.6), it is plausible to consider that these plutons (Campo Maior and Elvas) can be coeval and representative of the Variscan magmatism in this region. In such hypothesis, the differences between these isotopic values could be explained, on a time-integrated basis, either by magmatic sources for the Elvas massif less enriched in LREE than the sources involved in the Campo Maior massif, or, if both plutonites share similar depleted mantle sources, by magmatic differentiation paths considerably affected by crustal contamination processes, which reached higher degrees in the Campo Maior massif.

Components and circuits for tunneling diode based high frequency sources

Terahertz (THz) technology has been generating a lot of interest because of the potential applications for systems working in this frequency range. However, to fully achieve this potential, effective and efficient ways of generating controlled signals in the terahertz range are required. Devices that exhibit negative differential resistance (NDR) in a region of their current-voltage (I-V ) characteristics have been used in circuits for the generation of radio frequency signals. Of all of these NDR devices, resonant tunneling diode (RTD) oscillators, with their ability to oscillate in the THz range are considered as one of the most promising solid-state sources for terahertz signal generation at room temperature. There are however limitations and challenges with these devices, from inherent low output power usually in the range of micro-watts (uW) for RTD oscillators when milli-watts (mW) are desired. At device level, parasitic oscillations caused by the biasing line inductance when the device is biased in the NDR region prevent accurate device characterisation, which in turn prevents device modelling for computer simulations. This thesis describes work on I-V characterisation of tunnel diode (TD) and RTD (fabricated by Dr. Jue Wang) devices, and the radio frequency (RF) characterisation and small signal modelling of RTDs. The thesis also describes the design and measurement of hybrid TD oscillators for higher output power and the design and measurement of a planar Yagi antenna (fabricated by Khalid Alharbi) for THz applications. To enable oscillation free current-voltage characterisation of tunnel diodes, a commonly employed method is the use of a suitable resistor connected across the device to make the total differential resistance in the NDR region positive. However, this approach is not without problems as the value of the resistor has to satisfy certain conditions or else bias oscillations would still be present in the NDR region of the measured I-V characteristics. This method is difficult to use for RTDs which are fabricated on wafer due to the discrepancies in designed and actual resistance values of fabricated resistors using thin film technology. In this work, using pulsed DC rather than static DC measurements during device characterisation were shown to give accurate characteristics in the NDR region without the need for a stabilisation resistor. This approach allows for direct oscillation free characterisation for devices. Experimental results show that the I-V characterisation of tunnel diodes and RTD devices free of bias oscillations in the NDR region can be made. In this work, a new power-combining topology to address the limitations of low output power of TD and RTD oscillators is presented. The design employs the use of two oscillators biased separately, but with the combined output power from both collected at a single load. Compared to previous approaches, this method keeps the frequency of oscillation of the combined oscillators the same as for one of the oscillators. Experimental results with a hybrid circuit using two tunnel diode oscillators compared with a single oscillator design with similar values shows that the coupled oscillators produce double the output RF power of the single oscillator. This topology can be scaled for higher (up to terahertz) frequencies in the future by using RTD oscillators. Finally, a broadband Yagi antenna suitable for wireless communication at terahertz frequencies is presented in this thesis. The return loss of the antenna showed that the bandwidth is larger than the measured range (140-220 GHz). A new method was used to characterise the radiation pattern of the antenna in the E-plane. This was carried out on-wafer and the measured radiation pattern showed good agreement with the simulated pattern. In summary, this work makes important contributions to the accurate characterisation and modelling of TDs and RTDs, circuit-based techniques for power combining of high frequency TD or RTD oscillators, and to antennas suitable for on chip integration with high frequency oscillators.

A III-V channel field effect transistor for non-classical CMOS: process optimisation for improved gate stack function

This thesis describes a collection of studies into the electrical response of a III-V MOS stack comprising metal/GaGdO/GaAs layers as a function of fabrication process variables and the findings of those studies. As a result of this work, areas of improvement in the gate process module of a III-V heterostructure MOSFET were identified. Compared to traditional bulk silicon MOSFET design, one featuring a III-V channel heterostructure with a high-dielectric-constant oxide as the gate insulator provides numerous benefits, for example: the insulator can be made thicker for the same capacitance, the operating voltage can be made lower for the same current output, and improved output characteristics can be achieved without reducing the channel length further. It is known that transistors composed of III-V materials are most susceptible to damage induced by radiation and plasma processing. These devices utilise sub-10 nm gate dielectric films, which are prone to contamination, degradation and damage. Therefore, throughout the course of this work, process damage and contamination issues, as well as various techniques to mitigate or prevent those have been investigated through comparative studies of III-V MOS capacitors and transistors comprising various forms of metal gates, various thicknesses of GaGdO dielectric, and a number of GaAs-based semiconductor layer structures. Transistors which were fabricated before this work commenced, showed problems with threshold voltage control. Specifically, MOSFETs designed for normally-off (VTH > 0) operation exhibited below-zero threshold voltages. With the results obtained during this work, it was possible to gain an understanding of why the transistor threshold voltage shifts as the gate length decreases and of what pulls the threshold voltage downwards preventing normally-off device operation. Two main culprits for the negative VTH shift were found. The first was radiation damage induced by the gate metal deposition process, which can be prevented by slowing down the deposition rate. The second was the layer of gold added on top of platinum in the gate metal stack which reduces the effective work function of the whole gate due to its electronegativity properties. Since the device was designed for a platinum-only gate, this could explain the below zero VTH. This could be prevented either by using a platinum-only gate, or by matching the layer structure design and the actual gate metal used for the future devices. Post-metallisation thermal anneal was shown to mitigate both these effects. However, if post-metallisation annealing is used, care should be taken to ensure it is performed before the ohmic contacts are formed as the thermal treatment was shown to degrade the source/drain contacts. In addition, the programme of studies this thesis describes, also found that if the gate contact is deposited before the source/drain contacts, it causes a shift in threshold voltage towards negative values as the gate length decreases, because the ohmic contact anneal process affects the properties of the underlying material differently depending on whether it is covered with the gate metal or not. In terms of surface contamination; this work found that it causes device-to-device parameter variation, and a plasma clean is therefore essential. This work also demonstrated that the parasitic capacitances in the system, namely the contact periphery dependent gate-ohmic capacitance, plays a significant role in the total gate capacitance. This is true to such an extent that reducing the distance between the gate and the source/drain ohmic contacts in the device would help with shifting the threshold voltages closely towards the designed values. The findings made available by the collection of experiments performed for this work have two major applications. Firstly, these findings provide useful data in the study of the possible phenomena taking place inside the metal/GaGdO/GaAs layers and interfaces as the result of chemical processes applied to it. In addition, these findings allow recommendations as to how to best approach fabrication of devices utilising these layers.

High performance terahertz resonant tunnelling diode sources and broadband antenna for air-side radiation

Resonant tunnelling diode (RTD) is known to be the fastest electronics device that can be fabricated in compact form and operate at room temperature with potential oscillation frequency up to 2.5 THz. The RTD device consists of a narrow band gap quantum well layer sandwiched between two thin wide band gap barriers layers. It exhibits negative differential resistance (NDR) region in its current-voltage (I-V) characteristics which is utilised in making oscillators. Up to date, the main challenge is producing high output power at high frequencies in particular. Although oscillation frequencies of ~ 2 THz have been already reported, the output power is in the range of micro-Watts. This thesis describes the systematic work on the design, fabrication, and characterisation of RTD-based oscillators in microwave/millimetre-wave monolithic integrated circuits (MMIC) form that can produce high output power and high oscillation frequency at the same time. Different MMIC RTD oscillator topologies were designed, fabricated, and characterised in this project which include: single RTD oscillator which employs one RTD device, double RTDs oscillator which employs two RTD devices connected in parallel, and coupled RTD oscillators which combine the powers of two oscillators over a single load, based on mutual coupling and which can employ up to four RTD devices. All oscillators employed relatively large size RTD devices for high power operation. The main challenge was to realise high oscillation frequency (~ 300 GHz) in MMIC form with the employed large sized RTD devices. To achieve this aim, proper designs of passive structures that can provide small values of resonating inductances were essential. These resonating inductance structures included shorted coplanar wave guide (CPW) and shorted microstrip transmission lines of low characteristics impedances Zo. Shorted transmission line of lower Zo has lower inductance per unit length. Thus, the geometrical dimensions would be relatively large and facilitate fabrication by low cost photolithography. A series of oscillators with oscillation frequencies in the J-band (220 – 325 GHz) range and output powers from 0.2 – 1.1 mW have been achieved in this project, and all were fabricated using photolithography. Theoretical estimation showed that higher oscillation frequencies (> 1 THz) can be achieved with the proposed MMIC RTD oscillators design in this project using photolithography with expected high power operation. Besides MMIC RTD oscillators, reported planar antennas for RTD-based oscillators were critically reviewed and the main challenges in designing high performance integrated antennas on large dielectric constant substrates are discussed in this thesis. A novel antenna was designed, simulated, fabricated, and characterised in this project. It was a bow-tie antenna with a tuning stub that has very wide bandwidth across the J-band. The antenna was diced and mounted on a reflector ground plane to alleviate the effect of the large dielectric constant substrate (InP) and radiates upwards to the air-side direction. The antenna was also investigated for integration with the all types of oscillators realised in this project. One port and two port antennas were designed, simulated, fabricated, and characterised and showed the suitability of integration with the single/double oscillator layout and the coupled oscillator layout, respectively.

Sustainability of protein production by bioreactor processes using wind and solar power as energy sources

Food production account for significant share of global environmental impacts. Impacts are global warming, fresh water use, land use and some non-renewable substance consumption like phosphorous fertilizers. Because of non-sustainable food production, the world is heading to different crises. Both food- and freshwater crises and also land area and phosphorous fertilizer shortages are one of many challenges to overcome in near future. The major protein sources production amounts, their impacts on environment and uses are show in this thesis. In this thesis, a more sustainable than conventional way of biomass production for food use is introduced. These alternative production methods are photobioreactor process and syngas-based bioreactor process. The processes’ energy consumption and major inputs are viewed. Their environmental impacts are estimated. These estimations are the compared to conventional protein production’s impacts. The outcome of the research is that, the alternative methods can be more sustainable solutions for food production than conventional production. However, more research is needed to verify the exact impacts. Photobioreactor is more sustainable process than syngas-based bioreactor process, but it is more location depended and uses more land area than syngas-based process. In addition, the technology behind syngas-based application is still developing and it can be more efficient in the future.

Biochemical and epidemiological investigations of non-steroidal anti-inflammatory drug usage and related side effects in equids

Non-steroidal anti-inflammatory drugs (NSAIDs) are widely used in equine veterinary practice. These drugs exert their effect by inhibiting cyclooxygenase (COX) enzymes, which control prostaglandin production, a major regulator of tissue perfusion. Two isoforms of COX enzymes exist: COX-1 is physiologically present in tissues, while COX-2 is up-regulated during inflammation and has been indicated as responsible for the negative effects of an inflammatory response. Evidence suggests that NSAIDs that inhibit only COX-2, preserving the physiological function of COX-1 might have a safer profile. Studies that evaluate the effect of NSAIDs on COX enzymes are all performed under experimental conditions and none uses actual clinical patients. The biochemical investigations in this work focus on describing the effect on COX enzymes activity of flunixin meglumine and phenylbutazone, two non-selective COX inhibitors and firocoxib, a COX-2 selective inhibitor, in clinical patients undergoing elective surgery. A separate epidemiological investigation was aimed at describing the impact that the findings of biochemical data have on a large population of equids. Electronic medical records (EMRs) from 454,153 equids were obtained from practices in the United Kingdom, United States of America and Canada. Information on prevalence and indications for NSAIDs use was extracted from the EMRs via a text mining technique, improved from the literature and described and validated within this Thesis. Further the prevalence of a clinical sign compatible with NSAID toxicity, such as diarrhoea, is reported along with analysis evaluating NSAID administration in light of concurrent administration of other drugs and comorbidities. This work confirms findings from experimental settings that NSAIDs firocoxib is COX-2 selective and that flunixin meglumine and phenylbutazone are non-selective COX inhibitors and therefore their administration carries a greater risk of toxicity. However the impact of this finding needs to be interpreted with caution as epidemiological data suggest that the prevalence of toxicity is in fact small and the use of these drugs at the labelled dose is quite safe.

Sources of Information about Dietary Fibre: A Cross-Country Survey

Problem statement: Dietary fibre (DF) has been recognized as a major determinant for improvement of health. Hence the means of information through which people become aware of its benefits are crucial. Research questions: Where do you usually find information about dietary fibre? What means of communication do you consider the most appropriate to encourage the consumption of dietary fibre? Purpose of the study: This work aimed at studying the sources of information about dietary fibre, as a means to educate people about aspects related to healthy eating. Factors such as gender, level of education, living environment or country were evaluated as to their effect on the selection of sources and preferences.   Research Methods: Descriptive cross-sectional study by means of a questionnaire, applied to a non-probabilistic sample of 6010 participants from 10 countries in different continents (Europe, Africa and America), answered after informed consent by all participants. For the analysis were used several descriptive statistics tools, crosstabs and chi square test to assess the relations between some of the variables under study. Findings: Mostly the information about DF comes from the internet, but television is recognized as suitable. Differences were found between genders, levels of education, living environments and countries. The internet (preferred source), got highest scores for Hungary, urban areas, university education and female gender. The radio (least scored source) was preferred in Egypt, for men and with lower education (primary school). Conclusions: People get information through the internet due to easy access. However, it is to some extent a risk given the impossibility to control de information made public on the internet. The role of health centres and hospitals as well as schools should definitely be increased, as a responsible way to ensure correct information.

High temperature and vapor pressure deficit aggravate architectural effects but ameliorate non-architectural effects of salinity on dry mass production of tomato

Tomato (Solanum lycopersicum L.) is an important vegetable crop and often cultivated in regions exposed to salinity and high temperatures (HT) which change plant architecture, decrease canopy light interception and disturb physiological functions. However, the long-term effects of salinity and HT combination (S+HT) on plant growth are still unclear. A dynamic functional-structural plant model (FSPM) of tomato was parameterized and evaluated for different levels of S+HT combinations. The evaluated model was used to quantify the contributions of morphological changes (architectural effects) and physiological disturbances (non-architectural effects) on the reduction of shoot dry mass under S+HT. The model predicted architectural variables with high accuracy (>85%), which ensured the reliability of the model analyses. HT enhanced architectural effects but reduced non-architectural effects of salinity on dry mass production. The stronger architectural effects of salinity under HT could not be counterbalanced by the smaller non-architectural effects. Therefore, long-term influences of HT on shoot dry mass under salinity were negative at the whole plant level. Our model analysis highlights the importance of plant architecture at canopy level in studying the plant responses to the environments and shows the merits of dynamic FSPMs as heuristic tools.

An investigation into the properties of non-digestible carbohydrates that selectively promote colonic propionate production

Short chain fatty acids (SCFA), including propionate, are produced by the bacterial fermentation of carbohydrates in the colon. Propionate has many potential roles in health, including inhibiting cholesterol synthesis, de novo lipogenesis and increasing satiety. The profile of SCFA produced is determined by both the substrate available and the bacteria present and may be influenced by environmental conditions within the lumen of the colon. Whilst it may be beneficial to increase colonic propionate production, dietary strategies to achieve this are unproven. Adding propionate to food leads to poorer organoleptic properties, and oral propionate is absorbed in the small intestine. The optimum way to selectively increase colonic propionate would be to select fermentable carbohydrates that selectively promote propionate production. To date, few studies have undertaken a systematic assessment of the factors leading to increased colonic propionate production making the selection of propiogenic carbohydrates challenging. The aim of this thesis was to identify the best carbohydrates for selectively increasing propionate production, and to explore the factors which control propionate production. This work started with a systematic review of the literature for evidence of candidate carbohydrates, which led to a screen of ‘propiogenic’ substrates using in vitro batch fermentations and mechanistic analysis of the impact of pH, bond linkage and orientation using a range of sugars, polysaccharides and fibre sources. A new unit for SCFA production was developed to allow comparison of results from in vitro studies encompassing a range different methodologies found in the literature. The systematic review found that rhamnose yielded the highest rate and proportion of propionate production whereas, for polysaccharides, β-glucan ranked highest for rate and guar gum ranked highest for molar production, but this was not replicated across all studies. Thus, no single NDC was established as highly propiogenic. Some substrates appeared more propiogenic than others and when these were screened in vitro. Laminarin, and other β-glucans ranked highest for propionate production. Legume fibre and mycoprotein fibre were also propiogenic. A full complement of glucose disaccharides were tested to examine the role glycosidic bond orientation and position on propionate production. Of the glucose disaccharides tested, β(1-4) bonding was associated with increased proportion of propionate and α(1-1) and β(1-4) increased the rate and proportion of butyrate production. In conclusion, it appears that for fibre to affect satiety, high intakes of fibre are needed, and which a major mechanism is thought to occur via propionate. Within this thesis it was identified that rather than selecting specific fibres, increasing overall intakes of highly fermentable carbohydrates is as effective at increasing propionate production. Selecting carbohydrates with beta-bonding, particularly laminarin and other β(1-4) fermentable carbohydrates leads to marginal increases in propionate production. Compared with targeted delivery of propionate to the colon, fermentable carbohydrates examined in this thesis have lesser and variable effects on propionate production. A more complete understanding of the impact of bond configurations in polysaccharides, rather than disaccharides, may help selection or design of dietary carbohydrates which selectively promote colonic propionate production substrates for inclusion in functional foods. Overall this study has concluded that few substrates are selectively propiogenic and the evidence suggests that similar changes in propionate production may be achieved by modest changes in dietary fibre intake

Ageing in a non-heterosexual context.

There is increasing recognition of the importance of social and cultural differences in shaping the diversity of the ageing experience in contemporary Britain. Various social and cultural factors, such as those associated with class, ethnicity, gender and disability, influence people’s living circumstances and sources of support in later life. While they have been the subject of considerable speculation, ageing in a non-heterosexual context remains remarkably under-studied. This paper examines the difference that being non-heterosexual makes to how people experience ageing and later life. It draws on quantitative and qualitative data gathered for a British study of the living circumstances of non-heterosexuals aged between the fifties and the eighties. Previous work has overwhelmingly emphasised how individuals manage their sexual identities, but this paper focuses on the factors that shape the non-heterosexual experience of ageing and later life. Particular attention is paid to the relational and community contexts in which non-heterosexuals negotiate personal ageing. This not only provides insights into the specific challenges that ageing presents for non-heterosexuals, but also offers insights into the challenges faced by ageing non-heterosexuals and heterosexuals in ‘ detraditionalised ’ settings.

Sources de variation intra-populationelle de la morphologie des otolithes: asymétrie directionnelle et régime alimentaire

Otoliths are calcified structures located in Osteichthyes’ inner ear that are involved in audition and balance. Their morphology is used as an indicator of various ecological processes or properties. This application requires identifying the endogenous and exogenous factors that act simultaneously as sources of shape variation. This thesis aims at detecting and quantifying the relative contributions of directional asymmetry and diet to otolith shape variation at the intra-population level. Directional asymmetry between left and right otoliths was found in flat-fishes, the blind-side otolith being always longer and larger, whereas it was negligible in round-fishes. However, asymmetry amplitude never exceeded 18 %, which suggests evolutionary canalization of otolith shape symmetry. A correlation between global diet and otolith was detected in 4 species studied in situ. Diet composition contributed more than food amount to morphological variation and affected otolith shape both globally and locally. An experimental study on sea bass (Dicentrarchus larbrax) showed that diet composition in terms of essential polyunsaturated fatty acids at larval stage affects otolith morphogenesis during juvenile stage without impacting on individuals’ somatic growth. This result suggests a direct effect of diet on otolith shape and not an indirect one through the somatic-otolith growth relationship. This effect disappeared at later stages, morphogenetic trajectories converging back to a similar shape, which suggests ontogenetic canalization of otolith shape.

STANDARDIZATION OF CASSAVA MAHEWU FERMENTATION AND ASSESSMENT OF THE EFFECTS OF IRON SOURCES USED FOR FORTIFICATION

Cassava root is the main staple for 70% of the population in Mozambique, particularly in inaccessible rural areas, but is known to be low in iron. Anaemia is a public health problem in mothers and preschool children in Mozambique and up to 40% of these cases are probably due to dietary iron deficiency. The World Health Organization (WHO) and Food and Agriculture Organization of the United Nations (FAO) recognize the fortification of foodstuff as an effective method to remedy dietary deficiencies of micronutrients, including iron. Cassava mahewu, a non-alcoholic fermented beverage is prepared at subsistence level from cassava roots using indigenous procedures. The aim of the study was to standardize mahewu fermentation and investigate if the type of cassava fermented, or the iron compound used for fortification affected the final product. Roots of sweet and bitter varieties of cassava from four districts (Rapale, Meconta, Alto Molocue and Zavala) in Mozambique, were peeled, dried and pounded to prepare flour. Cassava flour was cooked and fermented under controlled conditions (45°C for 24 h). The fermentation period and temperature were set, based on the findings of a pilot study which showed that an end-point pH of about 4.5 was regularly reached after 24 h at 45°C. Cassava mahewu was fortified with ferrous sulfate (FeSO4.7H2O) or ferrous fumarate (C4H2FeO4) at the beginning (time zero) and at the end of fermentation (24 h). The amount of iron added to the mahewu was based on the average of the approved range of iron used for the fortification of maize meal. The mean pH at the endpoint was 4.5, with 0.29% titratable acidity. The pH and acidity were different to those reported in previous studies on maize mahewu, whereas the solid extract of 9.65% was found to be similar. Lactic acid bacteria (LAB) and yeast growth were not significantly different in mahewu fortified with either of the iron compounds. There was no significant difference between cassava mahewu made from bitter or sweet varieties. A standard method for preparation and iron fortification of cassava mahewu was developed. It is recommended that fortification occurs at the end of fermentation when done at household level.

Marine photosynthetic organisms from the Portuguese coast as sources of antitumoural compounds

Dissertação de Mestrado, Ciências Biomédicas, Departamento de Ciências Biomédicas e Medicina, Universidade do Algarve, 2016

Prevalence of AmpC β-lactamase among Gram-negative bacteria recovered from clinical specimens in Benin City, Nigeria

Purpose: Infections caused by AmpC-positive bacteria results in high patient morbidity and mortality making their detection clinically important as they cannot be detected in routine susceptibility testing. This study aim to determine the prevalence of AmpC β-lactamase among Gram negative bacteria recovered from clinical specimens in Benin City, Nigeria. Methods: A total of 256 consecutive and non-repetitive Gram negative bacteria were recovered from various clinical specimens. The prevalence of AmpC β-lactamase was determined using a combination of disc antagonism test and cefoxitin-cloxacillin inhibition test. Disc susceptibility test was performed on all isolates using standard techniques. Results: Cefoxitin-cloxacillin inhibition test detected more AmpC β-lactamase than other tests. The prevalence of AmpC β-lactamase did not differ significantly between both genders and between inpatients and out-patients (p>0.05). Isolates recovered from sputum had significantly higher prevalence of AmpC β-lactamase producers compared with isolates from other clinical specimens (p=0.0484). The prevalence of AmpC production was significantly higher among isolates of Pseudomonas aeruginosa than other isolates (p = 0.0085). Isolates that produced AmpC β-lactamase were more susceptible to the test cephalosoprins. Conclusion: An overall prevalence of AmpC β-lactamase (15.23 %) was observed in this study. Pseudomonas aeruginosa was the most prevalent producer of AmpC enzymes. Prudent use of antibiotics is advocated.