Proposal of a methodology for the design of the installation of turrets on aircrafts – the approach on the aerodynamic influences

The present work has its origin on the necessity of enabling a design certified company, or DOA (Design Organization Approval), to perform a modification; this modification is the installation of EO/IR (Electro-optical infrared) sensors on aircrafts. The subject of interest in this dissertation lies on the aerodynamic impact of the modification on the aircraft. The primary purpose of the present thesis is the creation of a methodology that regards the design stage of the modification. This methodology serves as guidance to the DOA design team that is assigned to the design of the modification. The methodology includes a recommendation to the certification of the modification; it contains a method intended to decide the location of the installation of the sensors on the aircraft; it also comprises of a design structure specifically adapted to the modification in study. Regarding the aerodynamic impact, it is studied the aerodynamic analysis’ tools, which allows one to relate the different stages of design to the most suited tools to each stage. A case study is performed with the purpose of not only validating the methodology which was created but also to giving a first approach to the preliminary design of the modification. As example, there are used the Lockheed Martin C-130 aircraft and the FLIR Star Safire III sensor.

Impact of chromossomal structure on the evolution of Schizosaccharomyces pombe undergoing Mutation Accumulation

Large chromosomal rearrangements are common in natural populations and thought to be involved in speciation events. In this project, we used experimental evolution to determine how the speed of evolution and the type of accumulated mutations depend on the ancestral chromosomal structure and genotype. We utilized two Wild Type strains and a set of genetically engineered Schizosaccharomyces pombe strains, different solely in the presence of a certain type of chromosomal variant (inversions or translocations), along with respective controls. Previous research has shown that these chromosomal variants have different fitness levels in several environments, probably due to changes in the gene expression along the genome. These strains were propagated in the laboratory at very low population sizes, in which we expect natural selection to be less efficient at purging deleterious mutations. We then measured these strains’ changes in fitness throughout this accumulation of deleterious mutations, comparing the evolutionary trajectories in the different rearrangements to understand if the chromosomal structure affected the speed of evolution. We also tested these mutations for possible epistatic effects and estimated their parameters: the number of arising deleterious mutations per generation (Ud) and each one’s mean effect (sd).

Electro-Optical/Infrared sensor turret integration on an aircraft - structural im-pact on LOCKHEED MARTIN C-130H and design methodology

The growing need to patrol and survey large maritime and terrestrial areas increased the need to integrate external sensors on aircraft in order to accomplish those patrols at increasingly higher altitudes, longer range and not depending upon vehicle type. The main focus of this work is to elaborate a practical, simple, effective and efficient methodology for the aircraft modification procedure resulting from the integration of an Elec-tro-Optical/Infra-Red (EO/IR) turret through a support structure. The importance of the devel-opment of a good methodology relies on the correct management of project variables as time, available resources and project complexity. The key is to deliver a proper tool for a project de-sign team that will be used to create a solution that fulfils all technical, non-technical and certi-fication requirements present in this field of transportation. The created methodology is inde-pendent of two main inputs: sensor model and aircraft model definition, and therefore it is in-tended to deliver the results for different projects besides the one that was presented in this work as a case study. This particular case study presents the development of a structure support for FLIR STAR SAPHIRE III turret integration on the front lower fuselage bulkhead (radome) of the LOCKHEED MARTIN C-130 H. Development of the case study focuses on the study of local structural analysis through the use of Finite Element Method (FEM). Development of this Dissertation resulted in a cooperation between Faculty of Science and Technology - Universidade Nova de Lisboa and the company OGMA - Indústria Aeronáutica de Portugal

Orthogonal models, structure crossing, nesting and inference

We intend to study the algebraic structure of the simple orthogonal models to use them, through binary operations as building blocks in the construction of more complex orthogonal models. We start by presenting some matrix results considering Commutative Jordan Algebras of symmetric matrices, CJAs. Next, we use these results to study the algebraic structure of orthogonal models, obtained by crossing and nesting simpler ones. Then, we study the normal models with OBS, which can also be orthogonal models. We intend to study normal models with OBS (Orthogonal Block Structure), NOBS (Normal Orthogonal Block Structure), obtaining condition for having complete and suffcient statistics, having UMVUE, is unbiased estimators with minimal covariance matrices whatever the variance components. Lastly, see ([Pereira et al. (2014)]), we study the algebraic structure of orthogonal models, mixed models whose variance covariance matrices are all positive semi definite, linear combinations of known orthogonal pairwise orthogonal projection matrices, OPOPM, and whose least square estimators, LSE, of estimable vectors are best linear unbiased estimator, BLUE, whatever the variance components, so they are uniformly BLUE, UBLUE. From the results of the algebraic structure we will get explicit expressions for the LSE of these models.

Nest structure of a Euglossa sp. n. In a fruit of Theobroma subincanum from Ecuadorean Amazonas

A nest of an undescribed species of Euglossa was found inside a fruit of Theobroma subincanum (Sterculiaceae) in the Amazonian rainforest, Ecuador. It contained 3-4 living females and one dead and 37 cells in all. Total length of bee 12.5mm; frons blue-green; thorax blue; abdomen bronze above, green and dark ventrally; and kind tibia blue. Tongue about 11 mm long.

Garland, since 1776- a unique ownership structure

The case is based on Garland, a 240 years old Portuguese family business, now owned by the Dawson family. It focuses on a decision made 50 years ago, aligned with what had been the company’s history, about the ownership rules for family members, which influences the ownership structure of the firm. It addresses the main issues about ownership in family businesses, and tackles the problem of succession planning and fair process. It contains a teaching note to support the utilization of the case in a classroom context, with learning objectives, target audience, a teaching plan, questions and proposed answers, and theory that relates to the case. It is also complemented with an epilogue and an overview of the case.

Does the existing Corporate Governance structure and strict Legal Framework, affect the strategic decisionmaking of CEOs?

This thesis is a case study on Corporate Governance and Business Ethics, using the Portuguese Corporate Law as a general setting. The thesis was conducted in Portugal with illustrations on past cases under the Business Judgment Rule of the State of Delaware, U.SA along with illustrations on current cases in Portugal under the Portuguese Judicial setting, along with a comparative analysis between both. A debate is being considered among scholars and executives; a debate on best practices within corporate governance and corporate law, associated with recent discoveries of unlawful investments that lead to the bankruptcy of leading institutions and an aggravation of the crisis in Portugal. The study aimed at learning possible reasons and causes for the current situation of the country’s corporations along with attempts to discover the best way to move forward. From the interviews and analysis conducted, this paper concluded that the corporate governance structure and legal frameworks in Portugal were not the sole influencers behind the actions and decisions of Corporate Executives, nor were they the main triggers for the recent corporate mishaps. But it is rather a combination of different factors that played a significant role, such as cultural and ethical aspects, individual personalities, and others all of which created gray areas beyond the legal structure, which in turn accelerated and aggravated the corporate governance crisis in the country.

Spatial and temporal distribution of a tiger beetle guild (Coleoptera: Carabidae: Cicindelinae) along a 105m long transect in the reserva florestal A. Ducke near Manaus (Central Amazonia)

The spatial and temporal distribution of a guild of eight diurnal tiger beetle species was studied on a 105 m long transect near the field station of the Reserva Florestal A. Ducke near Manaus (AM), Brazil. The transect followed a path that included both shaded and an open areas. Five of the species, restricted to primary forest, occurrred only in shaded areas of the transect, and three species occurred in open areas. Of all eight species only two of the open habitat species showed no clear seasonality in adult activity. In six species the activity of adults was limited to the rainy season. The most pronounced annual rhythm was found in Pentacomia ventralis, an open habitat species. Activity of adults was limited to October/November. First in-star larvae appeared shortly thereafter. Larval development mainly took place from January to May. The third instar larva entered a dormancy which lasted up to 10 months, and which enabled the synchronisation of emerging adults with annual seasons.

STAR: Speech Therapy with Augmented Reality for children with autism spectrum disorders

Graphics based systems of Augmented and Alternative Communication are widely used to promote communication in people with Autism Spectrum Disorders. This study discusses an integration of Augmented Reality in communication interventions, by relating elements of Augmented and Alternative Communication and Applied Behaviour Analysis strategies. An architecture for an Augmented Reality based interactive system to assist interventions is proposed. STAR provides an Augmented Reality tool to assist interventions performed by therapists and support for parents to join in and participate in the child’s intervention. Finally we report on the usage of the Augmented Reality tool in interventions with children with Autism Spectrum Disorders.

Experimental and numerical approaches for structural assessment in new footbridge designs (SFRSCC–GFPR hybrid structure)

Within the civil engineering field, the use of the Finite Element Method has acquired a significant importance, since numerical simulations have been employed in a broad field, which encloses the design, analysis and prediction of the structural behaviour of constructions and infrastructures. Nevertheless, these mathematical simulations can only be useful if all the mechanical properties of the materials, boundary conditions and damages are properly modelled. Therefore, it is required not only experimental data (static and/or dynamic tests) to provide references parameters, but also robust calibration methods able to model damage or other special structural conditions. The present paper addresses the model calibration of a footbridge bridge tested with static loads and ambient vibrations. Damage assessment was also carried out based on a hybrid numerical procedure, which combines discrete damage functions with sets of piecewise linear damage functions. Results from the model calibration shows that the model reproduces with good accuracy the experimental behaviour of the bridge.

Numerical Assessment of the out-of-plane response of a brick masonry structure without box behaviour

This paper presents the assessment of the out-of-plane response due to seismic loading of a masonry structure without rigid diaphragm. This structure corresponds to real scale brick masonry specimen with a main façade connected to two return walls. Two modelling approaches were defined for this evaluation. The first one consisted on macro modelling, whereas the second one on simplified micro modelling. As a first step of this study, static nonlinear analyses were conducted to the macro model aiming at evaluating the out-of-plane response and failure mechanism of the masonry structure. A sensibility analyses was performed in order to assess the mesh size and material model dependency. In addition, the macro models were subjected to dynamic nonlinear analyses with time integration in order to assess the collapse mechanism. Finally, these analyses were also applied to a simplified micro model of the masonry structure. Furthermore, these results were compared to experimental response from shaking table tests. It was observed that these numerical techniques simulate correctly the in-plane behaviour of masonry structures. However, the

Structure and composition of the ground-herb community in a terra-firme Central Amazonian forest

The herb community of tropical forests is very little known, with few studies addressing its structure quantitatively. Even with this scarce body of information, it is clear that the ground herbs are a rich group, comprising 14 to 40% of the species found in total species counts in tropical forests. The present study had the objective of increasing the knowledge about the structure and composition of the ground-herb community and to compare the sites for which there are similar studies. The study was conducted in a tropical non-inundated and evergreen forest 90 km north of Manaus, AM. Ground herbs were surveyed in 22 transects of 40 m², distributed in five plots of 4 ha. The inventoried community was composed of 35 species, distributed in 24 genera and 18 families. Angiosperms were represented by 8 families and Pteridophytes by 10 families. Marantaceae (12 sp) and Cyperaceae (4 sp) were the richest families. Marantaceae and Poaceae were the families with greatest abundance and cover. Marantaceae, Poaceae, Heliconiaceae and Pteridophytes summed 96% of total herb cover, and therefore were responsible for almost all the cover of the community. The 10 most important species had 83.7% of the individuals. In general, the most abundant species were also the most frequent. Richness per transect varied from 7 to 19 species, and abundance varied from 30 to 114 individuals. The community structure was quite similar to 3 other sites in South America and one site in Asia.

Structure-property relationships in polymer nanocomposites

Tese de Doutoramento em Ciência e Engenharia de Polímeros e Compósitos

Abundance of two Dendrocincla woodcreepers (aves: Dendrocolaptidae) in relation to forest structure in Central Amazonia

Few studies have been conducted to verify how the structure of the forest affects the occurence and abundance of neotropical birds. Our research was undertaken between January 2002 and July 2004 at the Reserva Ducke, near Manaus (02º55',03º01'S; 59º53',59º59'W) in central Amazonia, to verify how the forest structure affects the occurrence and abundance of two bird species: the Plain-brown Woodcreeper Dendrocincla fuliginosa and the White-chinned Woodcreeper Dendrocincla merula. Bird species occurrence was recorded using lines of 20 mist-nets (one sample unit), along 51 1-km transects distributed along 9 pararel 8 km trails covering an area of 6400 ha. Along these transects, we placed 50 x 50m plots where we recorded forest structure components (tree abundance, canopy openness, leaf litter, standing dead trees, logs, proximity to streams, and altitude). We then related these variables to bird occurence and abundance using multiple logistic and multiple linear regression models, respectively. We found that D. fuliginosa frequently used plateau areas; being more abundant in areas with more trees. On the other hand, D. merula occurred more frequently and was more abundant in areas with low tree abundance. Our results suggest that although both species overlap in the reserve (both were recorded in at least 68% of the sampled sites), they differ in the way they use the forest microhabitats. Therefore, local variation in the forest structure may contribute to the coexistence of congeneric species and may help to maintain local alpha diversity.

Effects of forest structure components on the occurence, group size and density of groups of bare-face tamarin (Saguinus bicolor - primates: Callitrichinae) in Central Amazonia

This study analyzed the influence of forest structural components on the occurence, size and density of groups of Bare-face Tamarin (Saguinus bicolor) - the most threatened species in the Amazon - and produced the first map of distribution of groups in large-scale spatial within the area of continuous forest. Population censuses were conducted between November 2002 and July 2003, covering 6400 hectares in the Ducke Reserve, Manaus-AM, Brazil. Groups of S. bicolor were recorded 41 times accordingly distributed in the environments: plateau (20); slopes (12); and lowlands (09). The mean group size was 4.8 indiv./group, and ranged from 2 to 11 individuals. In the sites where the groups were recorded, and in an equivalent number of sites where no tamarins were found located at least 500 m from those where they had been recorded, we placed 50 m x 50 m plots to record the following forest structural components: abundance of trees; abundance of lianas; abundance of fruiting trees and lianas; abundance of snags; abundance of logs; percentage of canopy opening; leaf litter depth; and altitude. Bare-face Tamarin more often uses areas with lower abundance of forest logs, smaller canopy opening and with higher abundance of snags, areas in the forest with smaller canopy opening present higher density of S. bicolor groups. Apparently this species does not use the forest in a random way, and may select areas for its daily activities depending on the micro-environmental heterogeneity produced by the forest structural components.