Citotoxidade de cimentos resinosos sobre célular obtidas da polpa de dentes humanos (HDPCs) e odontoblastóides (MDPC-23)

Pós-graduação em Reabilitação Oral - FOAR

Evaluation of Renal Protection From High Doses of Melatonin in an Experimental Model of Renal Ischemia and Reperfusion in Hyperglycemic Rats

Background. Melatonin is a free radical scavenger with important actions in the study of renal ischemia and reperfusion (I/R). This study evaluated possible renal protection of high doses of melatonin in an experimental model of I/R in which rats were submitted to acute hyperglycemia under anesthesia with isoflurane.Method. Forty-four male Wistar rats, weighing more than 300 g, were randomly divided into 5 groups: G1, sham (n = 10); G2, melatonin (n = 10; 50 mg.kg(-1)); G3, hyperglycemia (n = 9; glucose 2.5 g.kg(-1)); G4, hyperglycemia/melatonin (n = 10; 2.5 g.kg(-1) glucose + melatonin 50 mg.kg(-1)); and G5, I/R (n = 5). In all groups, anesthesia was induced with 4% isoflurane and maintained with 1.5% to 2.0% isoflurane. Intraperitoneal injection of melatonin (G1, G4), glucose (G3, G4), or saline (G1, G5) was performed 40 minutes before left renal ischemia. Serum plasma values for creatinine and glucose were determined at baseline (M1), immediately following reperfusion (M2), and 24 hours after completion of the experiment (M3). Histological analysis was performed to evaluate tubular necrosis (0-5).Results. Serum glucose was higher at M2 in the groups supplemented with glucose, hyperglycemia (356.00 +/- 107.83), and hyperglycemia/melatonin (445.3 +/- 148.32). Creatinine values were higher at T3 (P = .0001) for I/R (3.6 +/- 0.37), hyperglycemia/melatonin (3.9 +/- 0.46), and hyperglycemia (3.71 +/- 0.69) and lower in the sham (0.79 +/- 0.16) and melatonin (2.01 +/- 1.01) groups, P < .05. Histology showed no necrosis injury in the G1, lesion grade 2 in the G2, and severe acute tubular necrosis in the G3: (grade 4), G4: (grade 5) and G5: (grade 4) groups (P < .0001).Discussion. Melatonin protected the kidneys submitted to I/R in rats without hyperglycemia; however, this did not occur when the I/R lesion was associated with hyperglycemia.Conclusions. Due to its antioxidant and antiapoptotic action, melatonin was able to mitigate, but not prevent acute tubular necrosis in rats with hyperglycemia under anesthesia by isoflurane.

Effects of resistance training frequency on body composition and metabolics and inflammatory markers in overweight postmenopausal women

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Methods of Analysis for Peritubular Capillaritis and Glomerulitis in Acute Renal Rejection: Capillaritis in Management of Routine Diagnosis

Glomerulitis and peritubular capillaritis have been recognized as important lesions in acute renal rejection (AR). We studied glomerulitis and peritubular capillaritis in AR by 2 methods and investigated associations with C4d, type/grade of AR, and allograft survival time. Glomerulitis was measured according to Banff scores (glomerulitis by Banff Method [gBM]) and by counting the number of intraglomerular inflammatory cells (glomerulitis by Quantitative Method [gQM]). Capillaritis was classified by the Banff scoring system (peritubular capillaritis by Banff Method [ptcBM]) and by counting the number of cells in peritubular capillaries in 10 high-power fields (hpf; peritubular capillaritis by Quantitative Method [ptcQM]). These quantitative analyses were performed in an attempt to improve our understanding of the role played by glomerulitis and capillaritis in AR. The g0 + g1 group (gBM) associated with negative C4d (P = .02). In peritubular capillaritis, a larger number of cells per 10 hpf in peritubular capillaries (ptcQM) were observed in positive C4d cases (P = .03). The group g2 + g3 (gBM) correlated with graft loss (P = .01). Peritubular capillaritis was not significantly related to graft survival time. Our study showed that the Banff scoring system is the best method to study glomerulitis and observed that the evaluation of capillaritis in routine biopsies is difficult and additional studies are required for a better understanding of its meaning in AR biopsy specimens of renal allografts.

Interference of Vaccinal Antibodies on Serological Diagnostic of Leptospirosis in Vaccinated Buffalo using Two Types of Commercial Vaccines

The vaccinal antibodies interference represents one of the problems in the leptospirosis diagnostic on serum. The present study aimed to determine the pattern of serum agglutinins anti-Leptospirae spp in vaccinated female buffaloes against leptospirosis using two types of commercial vaccines: bacterin and extern membrane. The temporal interference of vaccinal titers on serum diagnostic was evaluated. Three groups of 11 adult female buffaloes were established as follows: G1 control, non-vaccinated; G2: vaccinated with bacterin containing six serovars and G3 with extern membrane vaccine containing five serovars. A booster was administered at 30 days from the first vaccination (dfv) and two re- vaccinations were performed in each semester (days 210 and 390). Serum samples were collected on days 0, 15, 30, 45 and 60 and every 30 days until 540 dfv, being submitted to Serum Agglutination Microscopy (SAM) against the serovars present in the vaccine. G1 remained always negative. Both vaccines induced serologic responses when assessed by SAM at 150 days post first vaccination against all serovars and they revealed maximum titers around days 45 and 60 after first vaccination. At the re-vaccination there was an increase on agglutinin levels, but of less intensity than the levels previously observed. After six months from the second revaccination (540 dfv), they were almost zero, which demonstrates the short duration of diagnostic interference. The serologic monitoring of the vaccinated herds can be an efficient method to evaluate the status of protection provided by the vaccine.

Influence of Implant Drill Materials on Wear, Deformation, and Roughness After Repeated Drilling and Sterilization

Purpose:The aim of this study was to evaluate deformation, roughness, and mass loss of stainless steel, diamond-like carbon (DLC)-coated and zirconia drills after multiple osteotomies with sterilization procedures.Materials and Methods:Drilling procedures were performed using stainless steel (G1), DLC-coated (G2), and zirconia (G3) drills. All groups were divided in subgroups 1, 2, 3, 4, and 5, corresponded to drills used 0, 10, 20, 30, and 40 times, respectively.Results:No significant differences in mass and roughness were detected among all groups and subgroups. In SEM images, all groups revealed signs of wear while coating delamination was detected in G2. Drills from G1 displayed more irregular surface, whereas cutting edges were more regular in G3.Conclusion:Zirconia drills presented more regular surfaces whereas stainless steel drills revealed more severe signs of wear. Further studies must be performed to evaluate the putative influence of these findings in heat generation.

Evaluation of Bone Heating, Drill Deformation, and Drill Roughness After Implant Osteotomy: Guided Surgery and Classic Drilling Procedure

Purpose: This study evaluated and compared bone heating, drill deformation, and drill roughness after several implant osteotomies in the guided surgery technique and the classic drilling procedure. Materials and Methods: The tibias of 20 rabbits were used. The animals were divided into a guided surgery group (GG) and a control group (CG); subgroups were then designated (G0, G1, G2, G3, and G4, corresponding to drills used 0, 10, 20, 30 and 40 times, respectively). Each animal received 10 sequential osteotomies (5 in each tibia) with each technique. Thermal changes were quantified, drill roughness was measured, and the drills were subjected to scanning electron microscopy. Results: Bone temperature generated by drilling was significantly higher in the GG than in the CG. Drill deformation in the GG and CG increased with drill use, and in the CG a significant difference between GO and groups G3 and G4 was observed. In the GG, a significant difference between GO and all other groups was found. For GG versus CG, a significant difference was found in the 40th osteotomy. Drill roughness in both groups was progressive in accordance with increased use, but there was no statistically significant difference between subgroups or between GG and CG overall. Conclusion: During preparation of implant osteotomies, the guided surgery technique generated a higher bone temperature and deformed drills more than the classic drilling procedure. The increase in tissue temperature was directly proportional to the number of times drills were used, but neither technique generated critical necrosis-inducing temperatures. Drill deformation was directly proportional to the number of times the drills were used. The roughness of the drills was directly proportional to the number of reuses in both groups but tended to be higher in the GG group.

Mineral loss and color change of enamel after bleaching and staining solutions combination

Pigments of food and beverages could affect dental bleaching efficacy. The aim of this investigation was to evaluate color change and mineral loss of tooth enamel as well as the influence of staining solutions normally used by adolescent patients undergoing home bleaching. Initial hardness and baseline color were measured on enamel blocks. Specimens were divided into five groups (n = 5): G1 (control) specimens were kept in artificial saliva throughout the experiment (3 weeks); G2 enamel was exposed to 10% carbamide peroxide for 6 h daily, and after this period, the teeth were cleaned and stored in artificial saliva until the next bleaching session; and G3, G4, and G5 received the same treatments as G2, but after bleaching, they were stored for 1 h in cola soft drink, melted chocolate, or red wine, respectively. Mineral loss was obtained by the percentage of hardness reduction, and color change was determined by the difference between the data obtained before and after treatments. Data were subjected to analysis of variance and Fisher's test (a = 0.05). G3 and G5 showed higher mineral loss (92.96 +/- 5.50 and 94.46 +/- 1.00, respectively) compared to the other groups (p = 0.05). G5 showed high-color change (9.34 +/- 2.90), whereas G1 presented lower color change (2.22 +/- 0.44) (p = 0.05). Acidic drinks cause mineral loss of the enamel, which could modify the surface and reduce staining resistance after bleaching. (C) 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)

Inactivation of Matrix-bound Matrix Metalloproteinases by Cross-linking Agents in Acid-etched Dentin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Bleaching effectiveness, hydrogen peroxide diffusion, and cytotoxicity of a chemically activated bleaching gel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histopathological Changes by the Use of Soft Reline Materials: A Rat Model Study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Concentrations of and application protocols for hydrogen peroxide bleaching gels: Effects on pulp cell viability and whitening efficacy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of the Interaction Between Sodium Hypochlorite and Several Formulations Containing Chlorhexidine and its Effect on the Radicular Dentin-SEM and Push-Out Bond Strength Analysis

The aim of the current study was to evaluate the presence of debris and smear layer after endodontic irrigation with different formulations of 2% chlorhexidine gluconate (CHX) and its effects on the push-out bond strength of an epoxy-based sealer on the radicular dentin. One hundred extracted human canines were prepared to F5 instrument and irrigated with 2.5% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. Fifty teeth were divided into five groups (n=10), according to the final irrigation protocol with different 2% CHX formulations: G1 (control, no final rinse irrigation), G2 (CHX solution), G3 (CHX gel), G4 (Concepsis), and G5 (CHX Plus). In sequence, the specimens were submitted to scanning electron microscopy (SEM) analysis, in the cervical-medium and medium-apical segments, to evaluate the presence of debris and smear layer. The other 50 teeth were treated equally to a SEM study, but with the root canals filled with an epoxy-based endodontic sealer and submitted to a push-out bond strength test, in the cervical, middle, and apical thirds. G2, G3, G4, and G5 provided higher precipitation of the debris and smear layer than G1 (P<0.05), but these groups were similar to each other (P>0.05), in both segments. The values obtained in the push out test did not differ between groups, independent of the radicular third (P>0.05). The CHXs formulations caused precipitation of the debris and smear layer on the radicular dentin, but these residues did not interfere in the push-out bond strength of the epoxy-based sealer. Microsc. Res. Tech. 77:17-22, 2014. (c) 2013 Wiley Periodicals, Inc.

Pre-treatment with glutamine reduces genetic damage due to cancer treatment with cisplatin

Cisplatin is an effective antineoplastic drug. However, it provokes considerable collateral effects, including genotoxic and clastogenic activity. It has been reported that a diet rich in glutamine can help inhibit such collateral effects. We evaluated this activity in 40 Swiss mice, distributed into eight experimental groups: G1 - Control group (PBS 0.1 mL/10g body weight); G2 - cisplatin group (cisplatin 6 mg/kg intraperitoneally); G3, G4, G5 - glutamine groups (glutamine at 150, 300, and 600 mg/kg, respectively; orally); G6, G7, G8 - Pre-treatment groups (glutamine at 150, 300, and 600 mg/kg, respectively; orally and cisplatin 6 mg/kg intraperitonially). For the micronucleus assay, samples of blood were collected (before the first use of the drugs at T0, then 24 (T1) and 48 (T2) hours after the first administration). For the comet assay, blood samples were collected only at T2. The damage reduction percentages for the micronucleus assay were 90.0, 47.3, and 37.3% at T1 and 46.0, 38.6, and 34.7% at T2, for G6, G7, and G8 groups, respectively. For the comet assay, the damage reduction percentages were 113.0, 117.4, and 115.0% for G6, G7, and G8, respectively. We conclude that glutamine is able to prevent genotoxic and clastogenic damages caused by cisplatin.

Can Heat Treatment Procedures of Pre-hydrolyzed Silane Replace Hydrofluoric Acid in the Adhesion of Resin Cement to Feldspathic Ceramic?

Purpose: To evaluate the influence of heat treatment (HT) procedures of a pre-hydrolyzed silane on bond strength of resin cement to a feldspathic ceramic.Materials and Methods: Ceramic and composite blocks (N = 30) were divided into six groups (n = 5) and subjected to the following conditioning procedures: G1: 9.6% hydrofluoric acid (HF) for 20 s + silane (RelyX Ceramic Primer, 3M ESPE) + resin cement (Panavia F2.0, Kuraray) (control); G2: HF (20 s) + silane + heat treatment in furnace (HTF) (100 degrees C, 2 min) + resin cement; G3: silane + HTF + resin cement; G4-HF (20 s) + silane + heat treatment with hot air (HTA) (50 +/- 5 degrees C for 1 min) + resin cement; G5: silane + HTA + resin cement; G6: silane + resin cement. The microtensile bond strength (MTBS) test was performed using a universal testing machine (1 mm/min). After debonding, the substrate and adherent surfaces were analyzed using a stereomicroscope and SEM to categorize the failure types. The data were statistically evaluated using one-way ANOVA and Tukey's test (5%).Results: The control group (G1) showed no pre-test failures and presented significantly higher mean MTBS (16.01 +/- 1.12 MPa) than did other groups (2.63 +/- 1.05 to 12.55 +/- 1.52 MPa) (p = 0.0001). In the groups where HF was not used, HTF (G3: 12.55 +/- 1.52 MPa) showed significantly higher MTBS than did HTA (G5: 2.63 +/- 1.05 MPa) (p < 0.05). All failure types were mixed, ie, adhesive between the resin cement and ceramic accompanied by cohesive failure in the cement.Conclusion: Heat treatment procedures for the pre-hydrolyzed silane either in a furnace or with the application of hot air cannot replace the use of HF gel for the adhesion of resin cement to feldspathic ceramic. Yet when mean bond strengths and incidence of pre-test failures are considered, furnace heat treatment delivered the second best results after the control group, being considerably better than hot air application.