Improvement of Pro-Oxidant Capacity of Protocatechuic Acid by Esterification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Micropartículas de metotrexato e ácido poli lático-co-glicólico obtidas por “spray-drying”

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Perfil de ácidos graxos em batatas Chips comercializadas em são José do Rio Preto - Brasil

The objective this study was to evaluate the fatty acids profile of samples of chips potato marketed in the city of São Jose do Rio Preto-SP. We collected samples of 10 brands of chips potato, obtained from 3 different batches. The fatty acids profile was obtained by gas chromatography, with peak identified by retention times with standards of methyl esters and the results calculated and expressed as g/100g of the sample. The fatty acids profile in chips potatoes from different brands were on average 39.22% for saturated fatty acids, 39.64% for monounsaturated, 18.60% for polyunsaturated and 2.43% for trans fatty acids.

Efeito Pesticida de Ésteres de Sacarose Sobre Calacarus heveae Feres (Acari: Eriophyidae) em Dois Clones de Seringueira

Sucrose esters are biodegradable, non pollutant and safe for health; moreover, they have shown great potential in the pest control. We tested a crude mix of sucrose esters on the survivorship and oviposition of Calacarus heveae Feres (Acari: Eriophyidae) females, an important rubber tree pest mite. The females were collected from rubber leaflets of the GT 1 and RRIM 600 clones. The mites were kept on stock arenas placed in rearing chamber at 28 + 0,1°C, 80 + 10% of relative humidity and 12h of light phase about two weeks before the assays. After this period, the mites were transferred to assay arenas made with leaflets from the same clone of stock arenas. The survivorship of females sprayed with sucrose esters in the concentrations of 1, 2, 3 and 4 g/L and their oviposition effect with 0.5 and 1 g/L were analyzed. The mites sprayed with 4 g/L had about 80% of mortality, while those with 1 g/L around 60%. All mites that died in the treatments with sucrose ester became dark with wrinkled tegument and decreased their body volume, suggesting dehydration. We also observed the efficacy of 1 g/L concentration to decrease the female oviposition in about 50%, in the third day after spraying. No differences were observed in the mortality and oviposition between females kept on both clones.

Ethyl biodiesel: Microwave irradiation aiding ethanolysis of waste cooking oil.

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação dos processos de tratamento do glicerol proveniente da produção do biodiesel

The substitution of diesel by biodiesel meets the current scenario to increase the consumption of alternative energy sources promoting sustainable development of a country. However, the production of biodiesel concurrently generates the formation of glycerine in the process is a by-product. The main application of glycerine is in the food industry, cosmetics, soaps, pharmaceuticals, among others, but these segments are not capable of absorbing the generated volume of glycerine, whereas the total volume of the biodiesel produced about 10% correspond to glycerine. Glycerine obtained from the transesterification reaction (necessary for production of biodiesel) triglycerides and alcohol contains certain impurities such as water, salts, esters, alcohol, and residual oil, which decrease the value. Thus, the purification process or the direct use of glycerine become essential to make it competitive biodiesel production process. This work aims to evaluate the different processes of purification and the use of glycerine obtained as by-product in the production of biodiesel. The research was theoretical, based on technical articles and theses published on this subject, and from these databases was established a summary of the most important processes

Atividade de fosfomonohidrolases presentes em fígado de girino de rã-touro (Lithobates catesbeianus) durante a metamorfose

Pós-graduação em Biotecnologia - IQ

Micro-extração em fase sólida (SPME) in situ e comparação de compostos voláteis em variedades de manga (Mangifera indica L.) resistentes e suscetíveis à mosca-das-frutas Anastrepha obliqua (Macquart) (Diptera: Tephritidae)

Pós-graduação em Química - IQ

Síntese, Caracterização Estrutural e Análise do Potencial Catalítico, para a Preparação de Biodiesel, de Niobatos Não Estequiométricos com Estrutura Tungstênio Bronze

Pós-graduação em Química - IBILCE

Nanozeólitas como suportes sólidos para imobilização enzimática: Síntese, caracterização de complexos nanozeólitas/enzimas e sua aplicação como catalisadores heterogêneos para produção de biodiesel via rota etílica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface degradation of lithium disilicate ceramic after immersion in acid and fluoride solutions

Purpose: To analyze whether immersion in sodium fluoride (NaF) solutions and/or common acidic beverages (test solutions) would affect the surface roughness or topography of lithium disilicate ceramic. Methods: 220 ceramic discs were divided into four groups, each of which was subdivided into five subgroups (n = 11). Control group discs were immersed in one of four test beverages for 4 hours daily or in artificial saliva for 21 days. Discs in the experimental groups were continuously immersed in 0.05% NaF, 0.2% NaF, or 1.23% acidulated phosphate fluoride (APF) gel for 12, 73, and 48 hours, respectively, followed by immersion in one of the four test beverages or artificial saliva. Vickers microhardness, surface roughness, scanning electron microscopy (SEM) associated with energy dispersive spectroscopy, and atomic force microscopy (AFM) assessments were made. Data were analyzed by nested analysis of variance (ANOVA) and Tukey's test (alpha = 0.05). Results: Immersion in the test solutions diminished the microhardness and increased the surface roughness of the discs. The test beverages promoted a significant reduction in the Vickers microhardness in the 0.05% and 0.2% NaF groups. The highest surface roughness results were observed in the 0.2% NaF and 1.23% APF groups, with similar findings by SEM and AFM. Acidic beverages affected the surface topography of lithium disilicate ceramic. Fluoride treatments may render the ceramic surface more susceptible to the chelating effect of acidic solutions.

Effects of short-term immersion and brushing with different denture cleansers on the roughness, hardness, and color of two types of acrylic resin

Purpose: To investigate the cumulative effects of brushing (B) or immersion (I), using different cleansing agents, on the surface roughness, hardness and color stability of a heat-polymerized denture resin, Lucitone 550 (L), and a hard chairside reline resin, Tokuyama Rebase Fast II (T). Methods: A total of 316 specimens (10 x 2 mm) were fabricated. The specimens (n= 9) were divided into brushing or immersion groups according to the following agents: dentifrice/distilled water (D), 1% sodium hypochlorite (Na0C1), Corega Tabs (Pb), 1% chlorhexidine gluconate (Chx), and 0.2% peracetic acid (Ac). Brushing and immersion were tested independently. Assays were performed after 1, 3, 21, 45 and 90 blushing cycles or immersion of 10 seconds each. Data were evaluated statistically by repeated measures ANOVA. Tukey's honestly significant difference (HSD) post-hoc test was used to determine differences between means (a= 0.05). Results: For L there was no statistically significant difference in roughness, except a significant decrease in roughness by brushing with D. T showed a significant effect on the roughness after 90 immersions with Ac. Hardness values decreased for L when specimens were immersed or brushed in Na0C1 and Pb. The hardness of T decreased with increases in the repetitions (immersion or brushing), regardless of the cleaning method. Values of color stability for L resin showed significant color change after brushing with and immersion in Ac and Pb. Brushing with D exhibited a higher incidence of color change. For T there were no significant differences between cleaning agents and repetitions in immersion. A color change was noted after three brushings with the Ac, Chx, and D. Brushing with dentifrice decreased roughness of L. Immersion in or brushing with Na0C1 and Pb decreased the hardness of L. For T, hardness decreased with increases in immersions or brushing. Color changes after the immersion in or brushing with cleaning agents were clinically acceptable according to National Bureau of Standards parameters for both resins.

Off-line TMAH-GC/MS and NMR characterization of humic substances extracted from river sediments of northwestern Sao Paulo under different soil uses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of typical aquatic humic substances in areas of sugarcane cultivation in Brazil using tetramethylammonium hydroxide thermochemolysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of CAD-CAM diamond bur deterioration on surface roughness and maximum failure load of Y-TZP-based restorations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)