Interaction of cationic bilayer fragments with a model oligonucleotide

The interaction between cationic bilayer fragments and a model oligonucleotide was investigated by differential scanning calorimetry, turbidimetry, determination of excimer to monomer ratio of 2-(10-(1-pyrene)-decanoyl)-phosphatidyl-choline in bilayer fragment dispersions and dynamic light scattering for sizing and zeta-potential analysis. Salt (Na(2)HPO(4)), mononucleotide (2`-deoxyadenosine-5`-monophosphate) or poly (dA) oligonucleotide (3`-AAA AAA AAA A-5`) affected structure and stability of dioctadecyldimethylammonium bromide bilayer fragments. Oligonucleotide and salt increased bilayer packing due to bilayer fragment fusion. Mononucleotide did not reduce colloid stability or did not cause bilayer fragment fusion. Charge neutralization of bilayer fragments by poly (dA) at 1:10 poly (dA):dioctadecyldimethylammonium bromide molar ratio caused extensive aggregation, maximal size and zero of zeta-potential for the assemblies. Above charge neutralization, assemblies recovered colloid stability due to charge overcompensation. For bilayer fragments/poly (dA), the nonmonotonic behavior of colloid stability as a function of poly (dA) concentration was unique for the oligonucleotide and was not observed for Na(2)HPO(4) or 2`-deoxyadenosine-5`-monophosphate. For the first time, such interactions between cationic bilayer fragments and mono- or oligonucleotide were described in the literature. Bilayer fragments/oligonucleotide assemblies may find interesting applications in drug delivery. (c) 2010 Elsevier B.V. All rights reserved.

Purification and partial characterization of a midgut membrane-bound alpha-glucosidase from Quesada gigas (Hemiptera: Cicadidae)

Adults of Quesada gigas (Hemiptera: Cicadidae) have a major alpha-glucosidase bound to the perimicrovillar membranes, which are lipoprotein membranes that surround the midgut cell microvilli in Hemiptera and Thysanoptera. Determination of the spatial distribution of alpha-glucosidases in Q. gigas midgut showed that this activity is not equally distributed between soluble and membrane-bound isoforms. The major membrane-bound enzyme was solubilized in the detergent Triton X-100 and purified to homogeneity by means of gel filtration on Sephacryl S-100, and ion-exchange on High Q and Mono Q columns. The purified alpha-glucosidase is a protein with a pH optimum of 6.0 against the synthetic substrate p-nitrophenyl alpha-D-glucoside and M(r) of 61,000 (SDS-PAGE). Taking into account V(Max)/K(M) ratios, the enzyme is more active on maltose than sucrose and prefers oligomaltodextrins up to maltopentaose, with lower efficiency for longer chain maltodextrins. The Q gigas alpha-glucosidase was immunolocalized in perimicrovillar membranes by using a monospecific polyclonal antibody raised against the purified enzyme from Dysdercus peruvianus. The role of this enzyme in xylem fluid digestion and its possible involvement in osmoregulation is discussed. (C) 2009 Elsevier Inc. All rights reserved.

PREDICTION OF METAL CATION TOXICITY TO THE BIOLUMINESCENT FUNGUS GERRONEMA VIRIDILUCENS

A correlation between the physicochemical properties of mono- [Li(I), K(I), Na(I)] and divalent [Cd(II), Cu(II), Mn(II), Ni(II), Co(II), Zn(II), Mg(II), Ca(II)] metal cations and their toxicity (evaluated by the free ion median effective concentration. EC50(F)) to the naturally bioluminescent fungus Gerronema viridilucens has been studied using the quantitative ion character activity relationship (QICAR) approach. Among the 11 ionic parameters used in the current study, a univariate model based on the covalent index (X(m)(2)r) proved to be the most adequate for prediction of fungal metal toxicity evaluated by the logarithm of free ion median effective concentration (log EC50(F)): log EC50(F) = 4.243 (+/-0.243) -1.268 (+/-0.125).X(m)(2)r (adj-R(2) = 0.9113, Alkaike information criterion [AIC] = 60.42). Additional two- and three-variable models were also tested and proved less suitable to fit the experimental data. These results indicate that covalent bonding is a good indicator of metal inherent toxicity to bioluminescent fungi. Furthermore, the toxicity of additional metal ions [Ag(I), Cs(I), Sr(II), Ba(II), Fe(II), Hg(II), and Pb(II)] to G. viridilucens was predicted, and Pb was found to be the most toxic metal to this bioluminescent fungus (EC50(F)): Pb(II) > Ag(I) > Hg(I) > Cd(II) > Cu(II) > Co(II) Ni(II) > Mn(II) > Fe(II) approximate to Zn(II) > Mg(II) approximate to Ba(II) approximate to Cs(I) > Li(I) > K(I) approximate to Na(I) approximate to Sr(II)> Ca(II). Environ. Toxicol. Chem. 2010;29:2177-2181. (C) 2010 SETAC

Photophysics and photostability of adenine in aqueous solution: A theoretical study

The sequential Monte Carlo/CASPT2 approach was employed to investigate deactivation and emission processes from the lowest-lying pi pi * and n pi * excited states of 9H-adenine in aqueous solution. It is found that conical intersections connecting the pi pi* and n pi* states with the ground state are also present in solution, whereas the barriers for the deactivation paths are significantly smaller on solvated conditions. The large destabilization of the n pi* state found in solution possibly prevents its involvement in the deactivation photophysics and explains the change from a bi- to a mono-exponential decay for the molecule in the gas phase and solution, respectively. (C) 2010 Elsevier B.V. All rights reserved.

Metabolism of (-)-grandisin from Piper solmsianum in Coleoptera and Lepidoptera species

The biotransformation of the major Piper solmsianum leaf phenylpropanoids, such as the tetrahydrofuran lignan grandisin and derivatives was investigated in the beetle Naupactus bipes as well as in the caterpillars Heraclides hectorides and Quadrus u-lucida. Analysis of fecal material indicated that metabolism occurred mainly through mono- and di-O-demethylation at para positions of 3,4,5-trimethoxyphenyl rings of tetrahydrofuran lignans during digestion by these insects. Additionally, 3-hydroxy-4,5-dimethoxycinnamyl and 3,4,5-trimethoxycinnamyl alcohols were identified in fecal extracts of N. bipes. (C) 2008 Elsevier Ltd. All rights reserved.

Solvatochromism in Binary Mixtures: First Report on a Solvation Free Energy Relationship between Solvent Exchange Equilibrium Constants and the Properties of the Medium

We have employed UV-vis spectroscopy in order to investigate details of the solvation of six solvatochromic indicators, hereafter designated as ""probes"", namely, 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl) phenolate (RB); 4-[(E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePM; 1-methylquinolinium-8-olate, QB; 2-bromo-4-[(E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePMBr, 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl) phenolate (WB); and 2,6-dibromo-4-[(E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePMBr,, respectively. These can be divided into three pairs, each includes two probes of similar pK(a) in water and different lipophilicity. Solvation has been studied in binary mixtures, BMs, of water, W, with 12 protic organic solvents, S, including mono- and bifunctional alcohols (2-alkoxyethanoles, unsaturated and chlorinated alcohols). Each medium was treated as a mixture of S, W, and a complex solvent, S-W, formed by hydrogen bonding. Values of lambda(max) (of the probe intramolecular charge transfer) were converted into empirical polarity scales, E(T)(probe) in kcal/mol, whose values were correlated with the effective mole fraction of water in the medium, chi w(effective). This correlation furnished three equilibrium constants for the exchange of solvents in the probe solvation shell; phi(W/S) (W substitutes S): phi(S-W/W) (S-W substitutes W), and phi(S-W/S) (S-W substitutes S), respectively. The values of these constants depend on the physicochemical properties of the probe and the medium. We tested, for the first time, the applicability of a new solvation free energy relationship: phi = constant + a alpha(BM) + b beta(BM) + s(pi*(BM) + d delta) + p log P(BM), where a, b, s, and p are regression coefficients alpha(BM), beta(BM), and pi*(BM) are solvatochromic parameters of the BM, delta is a correction term for pi*, and log P is an empirical scale of lipophilicity. Correlations were carried out with two-, three-, and four-medium descriptors. In all cases, three descriptors gave satisfactory correlations; use of four parameters gave only a marginal increase of the goodness of fit. For phi(W/S), the most important descriptor was found to be the lipophilicity of the medium; for phi(S-W/W) and phi(S-W/S), solvent basicity is either statistically relevant or is the most important descriptor. These responses are different from those of E(T)(probe) of many solvatochromic indicators in pure solvents, where the importance of solvent basicity is usually marginal, and can be neglected.

Self-reinforced composites obtained by the partial oxypropylation of cellulose fibers. 1. Characterization of the materials obtained with different types of fibers

The in-depth oxypropylation of different types of cellulose fibers, namely Avicel, Rayon, Kraft, and Filter Paper, was investigated. New biphasic mono-component materials were obtained, which could be hot-pressed to form films of cellulose fibers dispersed into a thermoplastic matrix. The success of this chemical modification was assessed by FTIR spectroscopy, X-ray diffraction, scanning electron microscopy. differential scanning calorimetry, thermogravimetric analysis and contact angle measurements. The optimization of this process led to the establishment of the optimal molar ratio between the cellulose CH groups and propylene oxide, which varied as a function of the specific morphology of the fibers. (C) 2008 Elsevier Ltd. All rights reserved.

Förutsättningar för specialiserade musikproduktioner för personer med cochleaimplantat

Denna studies syfte är att finna sätt att producera musikinspelningar som passar lyssnare med cochleaimplantat. Frågeställningen är: Vilka perceptuella egenskaper hos cochleaimplantat bör man som musikproducent tänka på för att kunna anpassa musikinspelningar för människor med CI?För att finna de perceptuella egenskaper som cochleaimplantat, CI, har vid musiklyssning gjordes en litteraturstudie av det som skrivits kopplat till musiklyssning med CI.Resultaten visar att inspelningarna bör mixas i mono och att melodierna i musiken bör innehålla toner med stora intervall. Grundtonen i komplexa toner bör höras, och övertonerna bör kontrolleras, så att övertonsserierna inte blir alltför långa och går för högt i frekvensspektrumet. Det dynamiska omfånget i inspelningen bör inte vara alltför stort, och frekvensomfånget bör hålla sig runt 200-5000 Hz. Syntetisk rumssimulering, som t.ex. reverb, bör inte heller användas. Vidare presenteras en idé till hur man skulle kunna styra implantaten direkt elektroniskt, för att skapa musik.

Photovoltaic Process Development and innovative Techniques

Photovoltaic processing is one of the processes that have significance in semiconductor process line. It is complicated due to the no. of elements involved that directly or indirectly affect the processing and final yield. So mathematically or empirically we can’t say assertively about the results specially related with diffusion, antireflective coating and impurity poisoning. Here I have experimented and collected data on the mono-crystal silicon wafers with varying properties and outputs. Then by using neural network with available experimental data output required can be estimated which is further tested by the test data for authenticity. One can say that it’s a kind of process simulation with varying input of raw wafers to get desired yield of photovoltaic mono-crystal cells.

Buried screen-printed contacts for silicon solar cells

A Simple way to improve solar cell efficiency is to enhance the absorption of light and reduce the shading losses. One of the main objectives for the photovoltaic roadmap is the reduction of metalized area on the front side of solar cell by fin lines. Industrial solar cell production uses screen-printing of metal pastes with a limit in line width of 70-80 μm. This paper will show a combination of the technique of laser grooved buried contact (LGBC) and Screen-printing is able to improve in fine lines and higher aspect ratio. Laser grooving is a technique to bury the contact into the surface of silicon wafer. Metallization is normally done with electroless or electrolytic plating method, which a high cost. To decrease the relative cost, more complex manufacturing process was needed, therefore in this project the standard process of buried contact solar cells has been optimized in order to gain a laser grooved buried contact solar cell concept with less processing steps. The laser scribing process is set at the first step on raw mono-crystalline silicon wafer. And then the texturing etch; phosphorus diffusion and SiNx passivation process was needed once. While simultaneously optimizing the laser scribing process did to get better results on screen-printing process with fewer difficulties to fill the laser groove. This project has been done to make the whole production of buried contact solar cell with fewer steps and could present a cost effective opportunity to solar cell industries.

Appropriate choice of aggregation operators in fuzzy decision support systems

Fuzzy logic provides a mathematical formalism for a unified treatment of vagueness and imprecision that are ever present in decision support and expert systems in many areas. The choice of aggregation operators is crucial to the behavior of the system that is intended to mimic human decision making. This paper discusses how aggregation operators can be selected and adjusted to fit empirical data—a series of test cases. Both parametric and nonparametric regression are considered and compared. A practical application of the proposed methods to electronic implementation of clinical guidelines is presented

Knowledge extraction from a mixed transfer function artificial neural network

One of the main problems with Artificial Neural Networks (ANNs) is that their results are not intuitively clear. For example, commonly used hidden neurons with sigmoid activation function can approximate any continuous function, including linear functions, but the coefficients (weights) of this approximation are rather meaningless. To address this problem, current paper presents a novel kind of a neural network that uses transfer functions of various complexities in contrast to mono-transfer functions used in sigmoid and hyperbolic tangent networks. The presence of transfer functions of various complexities in a Mixed Transfer Functions Artificial Neural Network (MTFANN) allow easy conversion of the full model into user-friendly equation format (similar to that of linear regression) without any pruning or simplification of the model. At the same time, MTFANN maintains similar generalization ability to mono-transfer function networks in a global optimization context. The performance and knowledge extraction of MTFANN were evaluated on a realistic simulation of the Puma 560 robot arm and compared to sigmoid, hyperbolic tangent, linear and sinusoidal networks.

Knowledge extraction from a mixed transfer function artificial neural network

One of the big problems with Artificial Neural Networks (ANN) is that their results are not intuitively clear. For example, if we use the traditional neurons, with a sigmoid activation function, we can approximate any function, including linear functions, but the coefficients (weights) in this approximation will be rather meaningless. To resolve this problem, this paper presents a novel kind of ANN with different transfer functions mixed together. The aim of such a network is to i) obtain a better generalization than current networks ii) to obtain knowledge from the networks without a sophisticated knowledge extraction algorithm iii) to increase the understanding and acceptance of ANNs. Transfer Complexity Ratio is defined to make a sense of the weights associated with the network. The paper begins with a review of the knowledge extraction from ANNs and then presents a Mixed Transfer Function Artificial Neural Network (MTFANN). A MTFANN contains different transfer functions mixed together rather than mono-transfer functions. This mixed presence has helped to obtain high level knowledge and similar generalization comparatively to monotransfer function nets in a global optimization context.

Analysing Anzac Day: the past, the present and future?

The aim of this paper is to identify the challenges that a social marketing campaign, which is predicated on Anzac Day and its commemorations and aimed at developing nationalistic behaviour in Australians, might face in the future. Questions posed for this paper are: Is this a viable campaign to promote nationalistic behaviour in Australia? Are there risks associated with such a campaign? In this discursive and exploratory paper Anzac Day and its commemorations are examined using generic marketing tools available to social marketers, specifically the Product Lifecycle (PLC) and consumer profiling, namely generational research. The results indicate that it is possible to predicate a social marketing campaign on Anzac Day and its commemorations to develop nationalistic behaviour in Australia, but there are some inherent risks associated with such a campaign. Issues are raised with regard to the mono-cultural nature of such a campaign; which generational segment(s) might take ownership of the commemorations in the future; and the surrounding structural and community-based strategies that will enhance such a campaign.

Molecular recognition of DNA by rigid [n]-polynorbornane-derived bifunctional intercalators: synthesis and evaluation of their binding properties

We have exploited the concept of multivalency in the context of DNA recognition, using novel chemistry to synthesize a new type of bis-intercalator with unusual sequence-selectivity. Bis-intercalation has been observed previously, but design principles for de novo construction of such molecules are not known. Our compounds feature two aromatic moieties projecting from a rigid, polynorbornane-based scaffold. The length and character of the backbone as well as the identity of the intercalators were varied, resulting in mono- or divalent recognition of the double helix with varying affinity. Our lead compound proved to be a moderately sequence-selective bis-intercalator with an unwinding angle of 27 and a binding constant of about 8 M. 9-Aminoacridine rings were preferred over acridine carboxamides or naphthalimides, and a rigid [3]-polynorbornane scaffold was superior to a [5]-polynorbornane. The flexibility of the linker connecting the rings to the scaffold, although less influential, could affect the strength and character of the DNA binding.