Caractérisation de l'impact des conditions opératoires sur l'efficience d'un procédé de concentration du lait par ultrafiltration

Les concentrés de protéines de lait sont couramment utilisés comme ingrédients lors de la standardisation du lait de fromagerie. La concentration des protéines est généralement réalisée par ultrafiltration (UF) à l’aide de membranes polymériques ayant un seuil de coupure de 10 kDa, et ce, jusqu’à un facteur de concentration volumique de 3.5X. Dans l’optique d’améliorer l’efficience du procédé d’UF, l’étude avait pour but de caractériser l’impact du mode opératoire (pression transmembranaire constante (465 et 672 kPa) et flux constant) ainsi que la température (10°C et 50°C) sur la performance du système jusqu’à un facteur de concentration volumique de 3.6X. Le module de filtration à l’échelle pilote comprenait une membrane d’UF en polyéthersulfone de 10 kDa d’une surface de 2,04 m2. La performance du système a été caractérisée sur le flux de perméation, la sélectivité et la consommation énergétique totale. L’étude a montré que le flux de perméation était 1,9 fois plus élevé à une température de 50°C comparativement à 10°C lors de l’UF du lait. Le coefficient de rejet des protéines n’a pas été affecté significativement par la pression transmembranaire et la température (P< 0,05). L’effet de la température a été observé au niveau de la teneur en calcium, laquelle était plus élevée de 12% dans les rétentats générés à 50C. La consommation énergétique totale du système d’UF était plus élevée à 10C comparativement à 50C, représentant 0,32±0,02 et 0,26±0,04 kWh/kg rétentat respectivement. Les résultats montrent que le ratio d’efficience énergétique (rapport entre le flux de perméation et la consommation énergétique) optimal a été obtenu à faible pression transmembranaire constante et à 50C. L’approche développée dans le cadre de ce projet fournira des outils aux industriels laitiers pour améliorer l’éco-efficience de leurs procédés de séparation baromembranaire.

Testing a linear propagation module on some acoustic scattering problems

Abstract not available

Tests of a silica aerogel cerenkov detector to be used in the european hybrid spectrometer

An 18 module Ceienkov detector with a total sensitive area of 2.3 m2 having silica aerogel as radiator is being tested in a particle beam at CERN PS. The modules having a sensitive area of 23 X 55 cm2 give typically a Cerenkov signal for (3= 1 particles of 12 photoelectrons for silica aerogel of refractive index 1.03 and a thickness of 15 cm. © 1981 IOP Publishing Ltd.

Influence of the cutting edge micro-geometry of PCBN tools on the flank wear in orthogonal quenched and tempered turning M2 steel

Quenched and tempered high-speed steels obtained by powder metallurgy are commonly used in automotive components, such as valve seats of combustion engines. In order to machine these components, tools with high wear resistance and appropriate cutting edge geometry are required. This work aims to investigate the influence of the edge preparation of polycrystalline cubic boron nitride (PCBN) tools on the wear behavior in the orthogonal longitudinal turning of quenched and tempered M2 high-speed steels obtained by powder metallurgy. For this research, PCBN tools with high and low-CBN content have been used. Two different cutting edge geometries with a honed radius were tested: with a ground land (S shape) and without it (E shape). Also, the cutting speed was varied from 100 to 220 m/min. A rigid CNC lathe was used. The results showed that the high-CBN, E-shaped tool presented the longest life for a cutting speed of 100 m/min. High-CBN tools with a ground land and honed edge radius (S shaped) showed edge damage and lower values of the tool’s life. Low-CBN, S-shaped tools showed similar results, but with an inferior performance when compared with tools with high CBN content in both forms of edge preparation.

From crime to court - an experience report of a digital forensics group project module.

This paper discusses the large-scale group project undertaken by BSc Hons Digital Forensics students at Abertay University in their penultimate year. The philosophy of the project is to expose students to the full digital crime "life cycle", from commission through investigation, preparation of formal court report and finally, to prosecution in court. In addition, the project is novel in two aspects; the "crimes" are committed by students, and the moot court proceedings, where students appear as expert witnesses for the prosecution, are led by law students acting as counsels for the prosecution and defence. To support students, assessments are staged across both semesters with staff feedback provided at critical points. Feedback from students is very positive, highlighting particularly the experience of engaging with the law students and culminating in the realistic moot court, including a challenging cross-examination. Students also commented on the usefulness of the final debrief, where the whole process and the student experience is discussed in an informal plenary meeting between DF students and staff, providing an opportunity for the perpetrators and investigators to discuss details of the "crimes", and enabling all groups to learn from all crimes and investigations. We conclude with a reflection on the challenges encountered and a discussion of planned changes.

RestrictionDigest: A powerful Perl module for simulating genomic restriction digests

Background: Reduced-representation sequencing technology iswidely used in genotyping for its economical and efficient features. A popular way to construct the reduced-representation sequencing libraries is to digest the genomic DNA with restriction enzymes. A key factor of this method is to determine the restriction enzyme(s). But there are few computer programs which can evaluate the usability of restriction enzymes in reduced-representation sequencing. SimRAD is an R package which can simulate the digestion of DNA sequence by restriction enzymes and return enzyme loci number as well as fragment number. But for linkage mapping analysis, enzyme loci distribution is also an important factor to evaluate the enzyme. For phylogenetic studies, comparison of the enzyme performance across multiple genomes is important. It is strongly needed to develop a simulation tool to implement these functions. Results: Here, we introduce a Perl module named RestrictionDigest with more functions and improved performance. It can analyze multiple genomes at one run and generate concise comparison of enzyme performance across the genomes. It can simulate single-enzyme digestion, double-enzyme digestion and size selection process and generate comprehensive information of the simulation including enzyme loci number, fragment number, sequences of the fragments, positions of restriction sites on the genome, the coverage of digested fragments on different genome regions and detailed fragment length distribution. Conclusions: RestrictionDigest is an easy-to-use Perl module with flexible parameter settings.With the help of the information produced by the module, researchers can easily determine the most appropriate enzymes to construct the reduced-representation libraries to meet their experimental requirements.

The bacterial helicase-primase interaction: a common structural/functional module

The lack of a high-resolution structure for the bacterial helicase-primase complex and the fragmented structural information for the individual proteins have been hindering our detailed understanding of this crucial binary protein interaction. Two new structures for the helicase-interacting domain of the bacterial primases from Escherichia coli and Bacillus stearothermophilus have recently been solved and both revealed a unique and surprising structural similarity to the amino-terminal domain of the helicase itself. In this minireview, the current data are discussed and important new structural and functional aspects of the helicase-primase interaction are highlighted. An attractive structural model with direct biological significance for the function of this complex and also for the development of new antibacterial compounds is examined.

TORP: The Open Robot Project A Framework for Module-Based Robots

The development of robots has shown itself as a very complex interdisciplinary research field. The predominant procedure for these developments in the last decades is based on the assumption that each robot is a fully personalized project, with the direct embedding of hardware and software technologies in robot parts with no level of abstraction. Although this methodology has brought countless benefits to the robotics research, on the other hand, it has imposed major drawbacks: (i) the difficulty to reuse hardware and software parts in new robots or new versions; (ii) the difficulty to compare performance of different robots parts; and (iii) the difficulty to adapt development needs-in hardware and software levels-to local groups expertise. Large advances might be reached, for example, if physical parts of a robot could be reused in a different robot constructed with other technologies by other researcher or group. This paper proposes a framework for robots, TORP (The Open Robot Project), that aims to put forward a standardization in all dimensions (electrical, mechanical and computational) of a robot shared development model. This architecture is based on the dissociation between the robot and its parts, and between the robot parts and their technologies. In this paper, the first specification for a TORP family and the first humanoid robot constructed following the TORP specification set are presented, as well as the advances proposed for their improvement.

Exergy analysis of a solar photovoltaic module

PV energy is the direct conversion of solar radiation into electricity. In this paper, an analysis of the influence of parameters such as global irradiance or temperature in the performance of a PV installation has been carried out. A PV module was installed in a building at the University of Málaga, and these parameters were experimentally determined for different days and different conditions of irradiance and temperature. Moreover, IV curves were obtained under these conditions to know the open-circuit voltage and the short-circuit current of the module. With this information, and using the first law of thermodynamics, an energy analysis was performed to determine the energy efficiency of the installation. Similarly, using the second law of thermodynamics, an exergy analysis is used to obtain the exergy efficiency. The results show that the energy efficiency varies between 10% and 12% and the exergy efficiency between 14% and 17%. It was concluded that the exergy analysis is more suitable for studying the performance, and that only electric exergy must be considered as useful exergy. This exergy efficiency can be improved if heat is removed from the PV module surface, and an optimal temperature is reached.

Integration of a Sedimentation Module to a Hydrologic Model and its Application to a Mercury TMDL Analysis

This research is part of continued efforts to correlate the hydrology of East Fork Poplar Creek (EFPC) and Bear Creek (BC) with the long term distribution of mercury within the overland, subsurface, and river sub-domains. The main objective of this study was to add a sedimentation module (ECO Lab) capable of simulating the reactive transport mercury exchange mechanisms within sediments and porewater throughout the watershed. The enhanced model was then applied to a Total Maximum Daily Load (TMDL) mercury analysis for EFPC. That application used historical precipitation, groundwater levels, river discharges, and mercury concentrations data that were retrieved from government databases and input to the model. The model was executed to reduce computational time, predict flow discharges, total mercury concentration, flow duration and mercury mass rate curves at key monitoring stations under various hydrological and environmental conditions and scenarios. The computational results provided insight on the relationship between discharges and mercury mass rate curves at various stations throughout EFPC, which is important to best understand and support the management mercury contamination and remediation efforts within EFPC.

Analyzing the Effect of Soiling on the Performance of a Photovoltaic System of Different Module Technologies in Kalkbult, South Africa

The fact that most of the large scale solar PV plants are built in arid and semi-arid areas where land availability and solar radiation is high, it is expected the performance of the PV plants in such locations will be affected significantly due to high cell temperature as well as due to soiling. Therefore, it is essential to study how the different PV module technologies will perform in such geographical locations to ensure a consistent and reliable power delivery over the lifetime of the PV power plants. As soiling is strongly dependent on the climatic conditions of a particular location a test station, consisted of about 24 PV modules and a well-equipped weather station, was built within the fences of Scatec’s 75 MW Kalkbult solar PV plant in South Africa. This study was performed to a better understand the effect of soiling by comparing the relative power generation by the cleaned modules to the un-cleaned modules. Such knowledge can enable more quantitative evaluations of the cleaning strategies that are going to be implemented in bigger solar PV power plants. The data collected and recorded from the test station has been analyzed at IFE, Norway using a MatLab script written for this thesis project. This thesis work has been done at IFE, Norway in collaboration with Stellenbosch University in South Africa and Scatec Solar a Norwegian independent power producer company. Generally for the polycrystalline modules it is found that the average temperature corrected efficiency during the period of the experiment has been 15.00±0.08 % and for the thin film-CdTe with ARC is 11.52% and for the thin film without ARC is about 11.13% with standard uncertainty of ±0.01 %. Besides, by comparing the initial relative average efficiency of the polycrystalline-Si modules when all the modules have been cleaned for the first time and the final relative efficiency; after the last cleaning schedule which is when all the reference modules E, F, G, and H have been cleaned for the last time it is found that poly3 performs 2 % and 3 % better than poly1 and poly16 respectively, poly13 performs 1 % better than poly15 as well as poly5 and poly12 performs 1 % and 2 % better than poly10 respectively. Besides, poly5 and poly12 performs a 9 % and 11 % better than poly7. Furthermore, there is no change in performance between poly6 and poly9 as well as poly4 and poly15. However, the increase in performance of poly3 to poly1, poly13 to poly15 as well as poly5 and poly12 to poly10 is insignificant. In addition, it is found that TF22 perform 7% better than the reference un-cleaned module TF24 and similarly; TF21 performs 7% higher than TF23. Furthermore, modules with ARC glass (TF17, TF18, TF19, and TF20) shows that cleaning the modules with only distilled water (TF19) or dry-cleaned after cleaned with distilled water(TF20) decreases the performance of the modules by 5 % and 4 % comparing to its respective reference uncleanedmodules TF17 and TF18 respectively.

L'Intégration d'un Module d'Étude Internet Dans la Classe de Comptabilité: Perceptions des Élèves et les Résultats Académiques

Implemented in the context of Business Administration students enrolled in a college level three year technology program, this research investigated students’ perceptions and academic results concurrent with the implementation of an online web module designed to facilitate student self-study. The students involved in this research were enrolled in a program that, while offering a broad education in business disciplines, specialized in the field of accounting. As a result, students were enrolled in academically rigorous accounting courses in each of the six semesters of the program. The weighting of these accounting courses imposes a significant self-study component – typically matching or exceeding the time spent in class. In this context many of the students enrolled in the Business Administration Program have faced difficulties completing the self-study component of the course effectively as demonstrated in low homework completion rates, low homework grade averages and ultimately low success rates in the courses. In an attempt to address this situation this research studied the implementation of a web-based self-study module. Through this module students could access a number of learning tools that were designed to facilitate the self-study process under the premise that more effective self-study learning tools will help remove obstacles and provide more timely confirmation of learning during student self-study efforts. This research collected data from a single cohort of students drawn from the first three sequential accounting courses of the Business Administration Program. The web-based self-study module was implemented in the third of the three sequential accounting courses. The first two of these courses implemented a traditional manual self-study environment. Data collected from the three accounting courses included homework completion rates, homework, exam and final grades for the respective courses. In addition the web-study module allowed the automatic reporting of student usage of a number of specific online learning tools. To complement the academic data, students were surveyed to gain insight into their perceptions of the effectiveness of the web-based system. The research provided a number of interesting insights. First among these was a confirmation of the importance of the self-study process in the academic achievement of the learners. Regardless of the self-study environment, manual or web-enhanced, a significant positive correlation existed between the students’ self-study results, demonstrated in both homework completion rates and homework averages and the corresponding final grades. These results confirm the importance of self-study found generally in the prevailing academic literature regarding students enrolled in higher education. In addition, the web-enhanced learning environment implemented during the third accounting course coincided with significantly higher homework completion rates and corresponding homework averages: homework completion rates in particular increased from a combined average of 63% in the first two accounting courses to 93% in the web-enhanced context of the third accounting course. Moreover, the homework completion rates of the web-enhanced course were evenly distributed across the cohort of students. A quartile-based analysis was subsequently completed. Quartiles were constructed by ranking the students according to their combined average homework completion rates from the first two manual self-study courses, Accounting I and II. The quartile-based homework completion rates for the manual self-study courses Accounting I and II were subsequently compared to the results these same quartiles of students achieved in the web-based self-study within Accounting III. While the first two courses demonstrated significantly uneven homework completion rates across the quartiles ranging from 31% to 91% homework completion rates, the differences among the four quartiles within the web-enhanced module, with an average homework completion rate of 93%, were statistically insignificant. Congruent with the positive academic results observed in the third, web-enhanced course, through the corresponding survey, students expressed a strong attitude in favor of the online self-study environment. This research was designed to add to the existing research that studies the implementation of learning in an online setting. Specifically, the research was designed to explore a middle ground of online learning – a web-enhanced course – a context that supplements the classroom experience rather than replacing it. The web-enhanced accounting course demonstrated impressive favorable results, both academically and in terms of students' perception of the system; these results suggest that a web-enhanced environment can provide learning tools that facilitate the self-study process while providing a structured learning environment that can help developing learners reach their potential.

Using an evidence-based online module to improve parents’ ability to manage their child with Developmental Coordination Disorder

Background : Developmental coordination disorder (DCD) is a prevalent neurodevelopmental disorder. Best practices include raising parents’ awareness and building capacity but few interventions incorporating these best practices are documented. Objective : To examine whether an evidence-based online module can increase the perceived knowledge and skills of parents of children with DCD, and lead to behavioural changes when managing their child’s health condition. Methods : A mixed-methods, before-after-follow-up design guided by the theory of planned behaviour was employed. Data about the knowledge, skills and behaviours of parents of children with DCD were collected using questionnaires prior to completing the module, immediately after, and three months later. One-way repeated measures ANOVAs and thematic analyses were performed on data as appropriate. Results : Fifty-eight participants completed all questionnaires. There was a significant effect of time on self-reported knowledge [F(2.00,114.00)=16.37, p=0.00] and skills [F(1.81,103.03)=51.37, p=0.00] with higher post- and follow-up scores than pre-intervention scores. Thirty-seven (65%) participants reported an intention to change behaviour postintervention; 29 (50%) participants had tried recommended strategies at follow-up. Three themes emerged to describe parents’ behavioural change: sharing information, trialing strategies and changing attitudes. Factors influencing parents’ ability to implement these behavioural changes included clear recommendations, time, and ‘right’ attitude. Perceived outcomes associated with the parental behavioural changes involved improvement in well-being for the children at school, at home, and for the family as a whole. Conclusions : The online module increased parents’ self-reported knowledge and skills in DCD management. Future research should explore its impacts on children’s outcomes long-term.