Increase of the Delivered Power Probability in Distribution Networks using Pareto DC Programming

A methodology to increase the probability of delivering power to any load point through the identification of new investments in distribution network components is proposed in this paper. The method minimizes the investment cost as well as the cost of energy not supplied in the network. A DC optimization model based on mixed integer non-linear programming is developed considering the Pareto front technique in order to identify the adequate investments in distribution networks components which allow increasing the probability of delivering power for any customer in the distribution system at the minimum possible cost for the system operator, while minimizing the energy not supplied cost. Thus, a multi-objective problem is formulated. To illustrate the application of the proposed methodology, the paper includes a case study which considers a 180 bus distribution network

Environmental/Regatta Buoy: Sensing System

Um dos principais objetivos da ciência é perceber a natureza, i.e., descobrir e explicar o funcionamento do mundo que nos rodeia. Para tal, os cientistas precisam de coligir dados e monitorar o meio ambiente. Em particular, considerando que cerca de 70% da Terra é coberta por água, a coleta de parâmetros de caracterização da água de grandes superfícies é uma prioridade. A monitorização das condições da água é feita principalmente através de bóias. No entanto, as bóias disponíveis no mercado não satisfazem as necessidades existentes. Esta é uma das principais razões que levaram o Laboratório de Sistemas Autónomos (LSA) do Instituto Superior de Engenharia do Porto a lançarem um projeto para o desenvolvimento de uma bóia reconfigurável e com dois modos de funcionamento: monitorização ambiental e baliza ativa de regata. O segundo modo é destinado a regatas de veleiros autónomos. O projeto começou há um ano com um projeto do European Project Project [1] (EPS), realizado por quatro estudantes internacionais, destinado à construção da estrutura da bóia e à selecção dos componentes mais adequados para o sistema de medição e controlo. A arquitetura que foi definida para este sistema é do tipo mestre-escravo e é composta por uma unidade de controlo mestre para a telemetria e configuração e uma unidade de controlo escrava para a medição e armazenamento de dados. O desenvolvimento do projeto continuou com dois estudantes belgas que trabalharam na comunicação e no armazenamento de dados. Este projeto, que prossegue com o desenvolvimento da medição e do armazenamento de dados do lado da unidade de controlo escrava, tem os seguintes objetivos: (i ) implementar o protocolo de comunicação na unidade de controlo escrava; (ii ) coligir e armazenar os dados dos sensores no cartão SD em tempo real; (iii ) fornecer dados em tempo útil; e (iv) recuperar dados do cartão SD em tempo diferido. As contribuições anteriores foram estudadas e foi feito um levantamento dos projetos congéneres existentes. O desenvolvimento do projeto atual começou com o protocolo de comunicação. Este protocolo, que foi projetado pelos alunos anteriores, foi um bom ponto de partida. No entanto, o protocolo foi atualizado e melhorado com novas funcionalidades. Esta última componente foi um trabalho conjunto com Laurens Allart, que esteve a trabalhar no subsistema de telemetria e de configuração durante este semestre. O protocolo foi implementado do lado da unidade de controlo escrava através de uma estrutura de múltiplas actividades paralelas (multithreaded). Esta estrutura recebe as mensagens da unidade mestre, executa as ações solicitadas e envia de volta o resultado. A bóia é um dispositivo reconfigurável multimodo que pode ser expandido com novos modos de operação no futuro. Infelizmente, sofre de algumas limitações: suporta uma carga máxima de 40 kg e tem uma área de implantação limitada pela distância máxima à estacão base.

Weekly tracking of stability of the flow of conversations into the subprocesses of the Last Planner System

21st Annual Conference of the International Group for Lean Construction – IGLC 21 – Fortaleza, Brazil

Analysis and implementation of a multi-ratio switched capacitor DC-DC converter for a supercapacitor power supply

An energy harvesting system requires an energy storing device to store the energy retrieved from the surrounding environment. This can either be a rechargeable battery or a supercapcitor. Due to the limited lifetime of rechargeable batteries, they need to be periodically replaced. Therefore, a supercapacitor, which has ideally a limitless number of charge/discharge cycles can be used to store the energy; however, a voltage regulator is required to obtain a constant output voltage as the supercapacitor discharges. This can be implemented by a Switched-Capacitor DC-DC converter which allows a complete integration in CMOS technology, although it requires several topologies in order to obtain a high efficiency. This thesis presents the complete analysis of four different topologies in order to determine expressions that allow to design and determine the optimum input voltage ranges for each topology. To better understand the parasitic effects, the implementation of the capacitors and the non-ideal effect of the switches, in 130 nm technology, were carefully studied. With these two analysis a multi-ratio SC DC-DC converter was designed with an output power of 2 mW, maximum efficiency of 77%, and a maximum output ripple, in the steady state, of 23 mV; for an input voltage swing of 2.3 V to 0.85 V. This proposed converter has four operation states that perform the conversion ratios of 1/2, 2/3, 1/1 and 3/2 and its clock frequency is automatically adjusted to produce a stable output voltage of 1 V. These features are implemented through two distinct controller circuits that use asynchronous time machines (ASM) to dynamically adjust the clock frequency and to select the active state of the converter. All the theoretical expressions as well as the behaviour of the whole system was verified using electrical simulations.

La carte postale et la représentation des espaces public et intime

La carte postale est un kaléidoscope de vues, d’ornements et de couleurs, qui consacre un tout petit espace au message. C’est à la photographie et aux procédés de reproduction photomécaniques que revient le mérite d’avoir industrialisé la production de la carte postale. Et ce sont les clichés de villes, avec leurs monuments et leurs paysages, qui confèrent à la carte postale son statut de moyen de communication de masse et qui lui concèdent une affinité avec l’industrie du tourisme. La carte postale s’est ainsi emparée de l’ambition photographique de reproduire le monde, s’alliant aux « besoins de l’exploration, des expéditions et des relevés topographiques » du médium photographique à ses débuts. Ayant comme point de départ la carte postale, notre objectif est de montrer les conséquences culturelles de la révolution optique, commencée au milieu du XIXe siècle, avec l’invention de l’appareil photo, et consumée dans la seconde moitié du XXe siècle, avec l’apparition de l’ordinateur. En effet, depuis l’apparition de l’appareil photographique et des cartes postales jusqu’au flux de pixels de Google Images et aux images satellite de Google Earth, un entrelacement de territoire, puissance et technique a été mis en oeuvre, la terre devenant, en conséquence, de plus en plus auscultée par les appareils de vision, ce qui impacte sur la perception de l’espace. Nous espérons pouvoir montrer avec cette étude que la lettre traditionnelle est à l’email ce que la carte postale est au post que l’on publie dans un blog ou dans des réseaux comme Facebook et Twitter. À notre sens, les cartes postales correspondent à l’ouverture maximale du système postal moderne, qui d’universel devient dépendant et partie intégrante des réseaux télématiques d’envoi. Par elles sont annoncés, en effet, la vitesse de transmission de l’information, la brièveté de la parole et l’hégémonie de la dimension imagétique du message, et pour finir, l’embarras provoqué par la fusion de l’espace public avec l’espace privé.

A survey on voltage sag events in power systems

This paper aims to survey the techniques and methods described in literature to analyse and characterise voltage sags and the corresponding objectives of these works. The study has been performed from a data mining point of view

Universality class of fiber bundles with strong heterogeneities

We study the effect of strong heterogeneities on the fracture of disordered materials using a fiber bundle model. The bundle is composed of two subsets of fibers, i.e. a fraction 0 ≤ α ≤ 1 of fibers is unbreakable, while the remaining 1 - α fraction is characterized by a distribution of breaking thresholds. Assuming global load sharing, we show analytically that there exists a critical fraction of the components αc which separates two qualitatively diferent regimes of the system: below αc the burst size distribution is a power law with the usual exponent Ƭ= 5/2, while above αc the exponent switches to a lower value Ƭ = 9/4 and a cutoff function occurs with a diverging characteristic size. Analyzing the macroscopic response of the system we demonstrate that the transition is conditioned to disorder distributions where the constitutive curve has a single maximum and an inflexion point defining a novel universality class of breakdown phenomena

The Point system of selection of immigrants in Quebec

The present paper is aimed at identifying what are the effects of the Point System of Selection of immigrants in Quebec. I defend that the distribution of points results in a different composition of immigrant stocks in terms of origin mix and not in terms of labour skills. To do so, I carry out a longitudinal descriptive analysis on the national composition of immigrants in Quebec and two other significant provinces (Ontario and British Columbia), as well as an analysis of the distribution of points in Quebec and in the rest of Canada.

Sample size and statistical power in the hierarchical analysis of variance: applications in morphometry of the nervous system.

Analysis of variance is commonly used in morphometry in order to ascertain differences in parameters between several populations. Failure to detect significant differences between populations (type II error) may be due to suboptimal sampling and lead to erroneous conclusions; the concept of statistical power allows one to avoid such failures by means of an adequate sampling. Several examples are given in the morphometry of the nervous system, showing the use of the power of a hierarchical analysis of variance test for the choice of appropriate sample and subsample sizes. In the first case chosen, neuronal densities in the human visual cortex, we find the number of observations to be of little effect. For dendritic spine densities in the visual cortex of mice and humans, the effect is somewhat larger. A substantial effect is shown in our last example, dendritic segmental lengths in monkey lateral geniculate nucleus. It is in the nature of the hierarchical model that sample size is always more important than subsample size. The relative weight to be attributed to subsample size thus depends on the relative magnitude of the between observations variance compared to the between individuals variance.

The second law of thermodynamics and the global climate system : A review of the maximum entropy production principle

The long-term mean properties of the global climate system and those of turbulent fluid systems are reviewed from a thermodynamic viewpoint. Two general expressions are derived for a rate of entropy production due to thermal and viscous dissipation (turbulent dissipation) in a fluid system. It is shown with these expressions that maximum entropy production in the Earth s climate system suggested by Paltridge, as well as maximum transport properties of heat or momentum in a turbulent system suggested by Malkus and Busse, correspond to a state in which the rate of entropy production due to the turbulent dissipation is at a maximum. Entropy production due to absorption of solar radiation in the climate system is found to be irrelevant to the maximized properties associated with turbulence. The hypothesis of maximum entropy production also seems to be applicable to the planetary atmospheres of Mars and Titan and perhaps to mantle convection. Lorenz s conjecture on maximum generation of available potential energy is shown to be akin to this hypothesis with a few minor approximations. A possible mechanism by which turbulent fluid systems adjust themselves to the states of maximum entropy production is presented as a selffeedback mechanism for the generation of available potential energy. These results tend to support the hypothesis of maximum entropy production that underlies a wide variety of nonlinear fluid systems, including our planet as well as other planets and stars

Temporal and spatial dynamics of benthic invertebrate communities in an alpine glacier-fed alluvial system

Summary The present thesis work focused on the ecology of benthic invertebrates in the proglacial floodplain of the Rhone in the Swiss Alps. The main glacial Rhone River and a smaller glacial tributary, the Mutt River, joined and entered a braiding multi-thread area. A first part concentrated on the disruption of the longitudinal patterns of environmental conditions and benthic invertebrate fauna in the Rhone by its tributary the Mutt. The Mutt had less harsh environmental conditions, higher taxonomic richness and more abundant zoobenthos compared to the Rhone upstream of the confluence. Although the habitat conditions in the main stream were little modified by the tributary, the fauna was richer and more diverse below the confluence. Colonisation from the Mutt induced the occurrence of faunal elements uncommon of glacial streams in the upper Rhone, where water temperature remains below 4°C. Although the glacial Rhone dominated the system with regard to hydrology and certain environmental conditions, the Mutt tributary has to be seen as the faunal driver of the system. The second part of the study concerned the spatio-temporal differentiation of the habitats and the benthic communities along and across the flood plain. No longitudinal differentiation was found. The spatial transversal differentiation of three habitat types with different environmental characteristics was successfully reflected in the spatial variability of benthic assemblages. This typology separated marginal sites of the flood plain, left bank sites under the influence of the Mutt, and the right bank sites under the influence of the Rh6ne. Faunistic spatial differences were emphasized by the quantitative structure of the fauna, richness, abundances and Simpson index of diversity. Seasonal environmental variability was positively related with Simpson index of diversity and the total richness per site. Low flow conditions were the most favourable season for the fauna and November was characterized by low spatial environmental heterogeneity, high spatial heterogeneity of faunal assemblage, maximum taxonomic richness, a particular taxonomic composition, highest abundances, as well as the highest primary food resources. The third part studied the egg development of three species of Ephemeroptera in the laboratory at 1.5 to 7°C and the ecological implications in the field. Species revealed very contrasting development strategies. Baetis alpinus has a synchronous and efficient egg development, which is faster in warmer habitats, enabling it to exploit short periods of favourable conditions in the floodplain. Ecdyonurus picteti has a very long development time slightly decreasing in warmer conditions. The high degree of individual variation suggests a genetic determination of the degree-days demand. Combined with the glacial local conditions, this strategy leads to an extreme delay of hatching and allows it to develop in very unpredictable habitats. Rhithrogena nivata is the second cold adapted species in Ephemeroptera. The incubation duration is long and success largely depends on the timing of hatching and the discharge conditions. This species is able to exploit extremely unstable and cold habitats where other species are limited by low water temperatures. The fourth part dealt with larval development in different habitats of the floodplain. Addition of data on egg development allowed the description of the life histories of the species from oviposition until emergence. Rhithrogena nivata and loyolaea generally have a two-year development, with the first winter passed as eggs and the second one as larvae. Development of Ecdyonurus picteti is difficult to document but appears to be efficient in a harsh and unpredictable environment. Baetis alpinus was studied separately in four habitats of the floodplain system with contrasting thermal regimes. Differences in success and duration of larval development and in growth rates are emphasised. Subvention mechanisms between habitats by migration of young or grown larvae were demonstrated. Development success and persistence of the populations in the system were thus increased. Emergence was synchronised to the detriment of the optimisation of the adult's size and fecundity. These very different development strategies induce a spatial and temporal distribution in the use of food resources and ecological niches. The last part of this work aimed at the synthesis of the characteristics and the ecological features of three distinct compartments of the system that are the upper Rhone, the Mutt and the floodplain. Their particular role as well as their inter-dependence concerning the structure and the dynamics of the benthic communities was emphasised. Résumé Ce travail de thèse est consacré à l'écologie des invertébrés benthiques dans la zone alluviale proglaciaire du Rhône dans les Alpes suisses. Le Rhône, torrent glaciaire principal, reçoit les eaux de la Mutt, affluent glaciaire secondaire, puis pénètre dans une zone de tressage formée de plusieurs bras. La première partie de l'étude se concentre sur la disruption par la Mutt des processus longitudinaux, tant environnementaux que faunistiques, existants dans le Rhône. Les conditions environnementales régnant dans la Mutt sont moins rudes, la richesse taxonomique plus élevée et le zoobenthos plus abondant que dans le Rhône en amont de la confluence. Bien que les conditions environnementales dans le torrent principal soient peu modifiées par l'affluent, la faune s'avère être plus riche et plus diversifiée en aval de la confluence. La colonisation depuis la Mutt permet l'occurrence de taxons inhabituels dans le Rhône en amont de la confluence, où la température de l'eau se maintient en dessous de 4°C. Bien que le Rhône, torrent glaciaire principal, domine le système du point de vu de l'hydrologie et de certains paramètres environnementaux, l'affluent Mutt doit être considéré comme l'élément structurant la faune dans le système. La deuxième partie concerne la différentiation spatiale et temporelle des habitats et des communautés benthiques à travers la plaine alluviale. Aucune différentiation longitudinale n'a été mise en évidence. La différentiation transversale de trois types d'habitats sur la base des caractéristiques environnementales a été confirmée par la variabilité spatiale de la faune. Cette typologie sépare les sites marginaux de la plaine alluviale, ceux sous l'influence de la Mutt (en rive gauche) et ceux sous l'influence du Rhône amont (en rive droite). Les différences spatiales de la faune sont mises en évidence par la structure quantitative de la faune, la richesse, les abondances et l'indice de diversité de Simpson. La variabilité saisonnière du milieu est positivement liée avec l'indice de diversité de Simpson et la richesse totale par site. L'étiage correspond à la période la plus favorable pour la faune et novembre réunit des conditions de faible hétérogénéité spatiale du milieu, de forte hétérogénéité spatiale de la faune, une richesse taxonomique maximale, une composition faunistique particulière, les abondances ainsi que les ressources primaires les plus élevées. La troisième partie est consacrée à l'étude du développement des oeufs de trois espèces d'Ephémères au laboratoire à des températures de 1.5 à 7°C, ainsi qu'aux implications écologiques sur le terrain. Ces espèces présentent des stratégies de développement très contrastées. Baetis alpinus a un développement synchrone et efficace, plus rapide en milieu plus chaud et lui permettant d'exploiter les courtes périodes de conditions favorables. Ecdyonurus picteti présente une durée de développement très longue, diminuant légèrement dans des conditions plus chaudes. L'importante variation interindividuelle suggère un déterminisme génétique de la durée de développement. Cette stratégie, associée aux conditions locales, conduit à un décalage extrême des éclosions et permet à l'espèce de se développer dans des habitats imprévisibles. Rhithrogena nivata est la seconde espèce d'Ephémères présentant une adaptation au froid. L'incubation des oeufs est longue et son succès dépend de la période des éclosions et des conditions hydrologiques. Cette espèce est capable d'exploiter des habitats extrêmement instables et froids, où la température est facteur limitant pour d'autres espèces. La quatrième partie traite du développement larvaire dans différents habitats de la plaine alluviale. Le développement complet est décrit pour les espèces étudiées de la ponte jusqu'à l'émergence. Rhithrogena nivata et loyolaea atteignent généralement le stade adulte en deux ans, le premier hiver étant passé sous forme d'oeuf et le second sous forme de larve. Le développement de Ecdyonurus picteti est difficile à documenter, mais s'avère cependant efficace dans un environnement rude et imprévisible. Baetis alpinus a été étudié séparément dans quatre habitats de la plaine ayant des régimes thermiques contrastés. La réussite et la durée du développement embryonnaire ainsi que les taux de croissance y sont variables. Des mécanismes de subvention entre habitats sont possibles par la migration de larves juvéniles ou plus développées, augmentant ainsi la réussite du développement et le maintien des populations dans le système. L'émergence devient synchrone, au détriment de l'optimisation de la taille et de la fécondité des adultes. Ces stratégies très différentes induisent une distribution spatiale et temporelle dans l'usage des ressources et des niches écologiques. La dernière partie synthétise les caractéristiques écologiques des trois compartiments du système que sont le Rhône amont, la Mutt et la zone alluviale. Leurs rôles particuliers et leurs interdépendances du point de vue de la structure et de la dynamique des communautés benthiques sont mis en avant.