DCE: the dynamic conditional execution in a multipath control independent architecture

This thesis presents DCE, or Dynamic Conditional Execution, as an alternative to reduce the cost of mispredicted branches. The basic idea is to fetch all paths produced by a branch that obey certain restrictions regarding complexity and size. As a result, a smaller number of predictions is performed, and therefore, a lesser number of branches are mispredicted. DCE fetches through selected branches avoiding disruptions in the fetch flow when these branches are fetched. Both paths of selected branches are executed but only the correct path commits. In this thesis we propose an architecture to execute multiple paths of selected branches. Branches are selected based on the size and other conditions. Simple and complex branches can be dynamically predicated without requiring a special instruction set nor special compiler optimizations. Furthermore, a technique to reduce part of the overhead generated by the execution of multiple paths is proposed. The performance achieved reaches levels of up to 12% when comparing a Local predictor used in DCE against a Global predictor used in the reference machine. When both machines use a Local predictor, the speedup is increased by an average of 3-3.5%.

Reusing values in a dynamic conditional execution architecture

A Execução Condicional Dinâmica (DCE) é uma alternativa para redução dos custos relacionados a desvios previstos incorretamente. A idéia básica é buscar todos os fluxos produzidos por um desvio que obedecem algumas restrições relativas à complexidade e tamanho. Como conseqüência, um número menor de previsões é executado, e assim, um número mais baixo de desvios é incorretamente previsto. Contudo, tal como outras soluções multi-fluxo, o DCE requer uma estrutura de controle mais complexa. Na arquitetura DCE, é observado que várias réplicas da mesma instrução são despachadas para as unidades funcionais, bloqueando recursos que poderiam ser utilizados por outras instruções. Essas réplicas são geradas após o ponto de convergência dos diversos fluxos em execução e são necessárias para garantir a semântica correta entre instruções dependentes de dados. Além disso, o DCE continua produzindo réplicas até que o desvio que gerou os fluxos seja resolvido. Assim, uma seção completa do código pode ser replicado, reduzindo o desempenho. Uma alternativa natural para esse problema é reusar essas seções (ou traços) que são replicadas. O objetivo desse trabalho é analisar e avaliar a efetividade do reuso de valores na arquitetura DCE. Como será apresentado, o princípio do reuso, em diferentes granularidades, pode reduzir efetivamente o problema das réplicas e levar a aumentos de desempenho.

Green building: análise das dificuldades (ainda) enfrentadas durante o processo de certificação LEED no Brasil

A preocupação com o esgotamento dos recursos naturais e a conscientização sobre as questões ligadas à sustentabilidade provocaram o estudo em um setor que tem sido apontado como de grande importância para a transformação do meio ambiente: a construção civil. Com isso percebemos o surgimento de um conjunto de práticas e procedimentos visando as chamadas "construções sustentáveis", que introduziram uma nova realidade comercial no segmento da construção civil. Para avaliar se uma construção é ou não sustentável surgiram os eco-labellings, que através de sistema de pontuação ou conceitos permitem avaliar qualitativamente em que grau de sustentabilidade uma edificação encontra-se. Em especial, o mercado brasileiro vem, desde 2004, buscando a certificação ambiental LEED; sendo assim, a presente dissertação tem como objetivo identificar, após quase uma década desde a primeira submissão de projeto brasileiro ao USGBC, quais ainda são as dificuldades enfrentadas no processo de certificação LEED. O referencial teórico reforçou que o segmento da construção civil contribui de duas formas para a degradação do meio ambiente: no consumo de recursos naturais e energéticos, e na geração de grande quantidade de resíduos. Por esse motivo, estudos nessa área são extremamente importantes para a transformação do meio ambiente, que, através da adoção de práticas construtivas sustentáveis poderá minimizar os impactos gerados. Neste trabalho, optou-se pela utilização de pesquisa exploratória quanto aos fins, uma vez que existe pouco conhecimento acumulado sobre a avaliação do processo de certificação LEED, e bibliográfica, complementada com pesquisa de campo, quanto ao meio, pois fundamenta-se em estudo desenvolvido com base em material publicado, complementado por entrevistas no campo. Este trabalho caracteriza-se por se um estudo introdutório à compreensão do tema e convida a estudos complementares mais abrangentes, dada a relevância do assunto nas três esferas de sustentabilidade: social, ambiental e econômica.

Nesting architecture and population structure of the fungus-growing ant Cyphomyrmex transversus (Formicidae: Myrmicinae: Attini) in the Brazilian coastal zone of Ilheus, Bahia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The nest architecture of the ant, Pheidole oxyops Forel, 1908 (Hymenoptera : Formicidae)

Pheidole oxyops builds subterranean nests, with an external architecture that is distinctive and easily recognizable by its wide and specific entrance hole, measuring up to 12.2 cm in diameter, denoting a pitfall-trap. In order to study the nests'internal architecture, seven nests were excavated; four were identified with neutral talc, while the others were cast in cement and then excavated. Measurements were made in order to gain a better understanding of their structures, and a photographic documentation was obtained as well. The excavations revealed that the nests are perpendicular relative to the ground, beginning with a cylindrical channel with a mean length of 13.5 cm, containing irregular formations, and whose diameter becomes progressively narrower until the first chamber is formed. As the channel continues, dish-like chambers appear, interconnected by channels that become progressively narrower and longer, while the chambers are arranged at greater distances from each other as nest depth increases. Both channels and chambers are located on the vertical projection of the entrance hole. Nests may reach a depth of up to 5.09 m, with a number of chambers ranging between 4 and 14.

Internal Architecture and Population Size of Acromyrmex subterraneus molestans (Hymenoptera, Formicidae) Nests: Comparison Between a Rural and an Urban Area

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Iron phthalocyanine in non-aqueous medium forming layer-by-layer films: growth mechanism, molecular architecture and applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Molecular architecture of thin films fabricated via physical vapor deposition and containing a poly(azo)urethane

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optimized architecture for Tyrosinase-containing Langmuir-Blodgett films to detect pyrogallol

The control of molecular architectures has been a key factor for the use of Langmuir-Blodgett (LB) films in biosensors, especially because biomolecules can be immobilized with preserved activity. In this paper we investigated the incorporation of tyrosinase (Tyr) in mixed Langmuir films of arachidic acid (AA) and a lutetium bisphthalocyanine (LuPc2), which is confirmed by a large expansion in the surface pressure isotherm. These mixed films of AA-LuPc2 + Tyr could be transferred onto ITO and Pt electrodes as indicated by FTIR and electrochemical measurements, and there was no need for crosslinking of the enzyme molecules to preserve their activity. Significantly, the activity of the immobilised Tyr was considerably higher than in previous work in the literature, which allowed Tyr-containing LB films to be used as highly sensitive voltammetric sensors to detect pyrogallol. Linear responses have been found up to 400 mu M, with a detection limit of 4.87 x 10(-2) mu M (n = 4) and a sensitivity of 1.54 mu A mu M-1 cm(-2). In addition, the Hill coefficient (h = 1.27) indicates cooperation with LuPc2 that also acts as a catalyst. The enhanced performance of the LB-based biosensor resulted therefore from a preserved activity of Tyr combined with the catalytic activity of LuPc2, in a strategy that can be extended to other enzymes and analytes upon varying the LB film architecture.

Molecular architecture and electrical properties in evaporated films of cobalt phthalocyanine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evolving Future Internet clean-slate Entity Title Architecture with quality-oriented control-plane extensions

A Internet atual vem sofrendo vários problemas em termos de escalabilidade, desempenho, mobilidade, etc., devido ao vertiginoso incremento no número de usuários e o surgimento de novos serviços com novas demandas, propiciando assim o nascimento da Internet do Futuro. Novas propostas sobre redes orientadas a conteúdo, como a arquitetura Entidade Titulo (ETArch), proveem novos serviços para este tipo de cenários, implementados sobre o paradigma de redes definidas por software. Contudo, o modelo de transporte do ETArch é equivalente ao modelo best-effort da Internet atual, e vem limitando a confiabilidade das suas comunicações. Neste trabalho, ETArch é redesenhado seguindo o paradigma do sobreaprovisionamento de recursos para conseguir uma alocação de recursos avançada integrada com OpenFlow. Como resultado, o framework SMART (Suporte de Sessões Móveis com Alta Demanda de Recursos de Transporte), permite que a rede defina semanticamente os requisitos qualitativos das sessões para assim gerenciar o controle de Qualidade de Serviço visando manter a melhor Qualidade de Experiência possível. A avaliação do planos de dados e de controle teve lugar na plataforma de testes na ilha do projeto OFELIA, mostrando o suporte de aplicações móveis multimídia com alta demanda de recursos de transporte com QoS e QoE garantidos através de um esquema de sinalização restrito em comparação com o ETArch legado

The influence of external ultrasound on the histologic architecture of the organic capsule around smooth silicone implants: Experimental study in rats

Background Capsular contracture is the main complication related to breast silicone implants, and its prevention remains a medical challenge. The authors present experimental research examining the effect of external ultrasound on the formation and contracture of peri-implant capsules.Methods In this study, 42 male Wistar rats had a 2-mm smooth surface implant placed in a dorsal submuscular pocket. They then were separated into ultrasound'' and control'' groups that received repeated external applications either with or without the ultrasound power on. Ultrasound applications were given three times a week for a period of 90 days. After that, both groups were housed under the same conditions with no application scheduled. Five animals of each group, killed at 30, 60, 90, and 180 days, had their implants removed along with the capsule, which received a special histologic preparation via annular sectioning that provided wide circumferential observation of the capsular tissue. Sections were stained with hematoxylin/eosin stain, Masson's trichrome stain, and Pricrosirius Red stain for regular microscopic evaluation under normal and polarized light.Results Histologic data showed that capsules from the ultrasound and control groups had statistically significant differences. Ultrasound application developed a capsular architecture similar to that shown within textured silicone implants, and its effect had an early definition with subsequent stabilization.Conclusion The authors conclude that early and repeated external ultrasound application enhances the thickness, cellular count, and vascularity of smooth silicone capsular tissue, whereas it diminishes the pattern of parallel orientation of collagen fibers.

Morphological architecture of Actinocephalus (Koern.) sano (Eriocaulaceae-Poales)

Actinocephalus exhibits perhaps more diversity in habit than any other genus of Eriocaulaceae. This variation is largely a result of differences in the arrangement of the paraclades. Based on the analysis of stem architecture of all 25 species of Actinocephalus, the following patterns were established: (1) leaf rosette, with no elongated axis, instead the axillary paraclades originating directly from the short aerial stem, (2) rosette axis continuing into an elongated axis with spirally arranged paraclades, (3) an elongated axis originating from a rhizome, with ramified paraclades, and (4) an elongated axis originating from a short aerial stem, with paraclades arranged in a subwhorl. The elongated axis exhibits indeterminate growth only in pattern 4. Patterns 3 and 4 are found exclusively in Actinocephalus; pattern I occurs in many other genera of Eriocaulaceae, while pattern 2 is also found in Syngonanthus and Paepalanthus. Anatomically, each stem structure (i.e., paraclade, elongated axis, short aerial stem, rhizome) is thickened in a distinctive way and this can be used to distinguish them. Specifically, elongated axes and paraclades lack thickening, thickening of short aerial stems results from the primary thickening meristem and/or the secondary thickening meristem. Thickening of rhizomes results from the activity of the primary thickening meristem. (c) 2008 Elsevier GmbH. All rights reserved.

Nest architecture and population dynamics of the Ponerinae ant, Ectatomma opaciventre Roger (Hymenoptera : Formicidae)

Eleven nests of Ectatomma opaciventre were collected from January to December, 1994, in Rio Claro, SP, southeastern Brazil. This species excavates their nests up to 68 cm deep, containing 3, 4 or 5 chambers. The hole of entrance has a chimney-like rigid structure, with up to 2/5 cm high. The most numerous colonies were found in January and February, with 47 and 62 adult ants, respectively. The quantity of individuals decreased from March, being observed colonies with only 9 adult ants in June and July. The colony population increased again since September. Reproductive forms (winged ants) were observed between October and February. We did not observed immature stages in July, but they were numerous between September and March. There was a significant correlation between the number of colony individuals and temperature, but not between the number of colony individuals and relative humidity and rainfall. E. opaciventre is a species of hunter ants which have not an efficient recruitment system for food collecting, consequently their colonies are small due to the scarcity of food resources during the colder and dry months.

Nest architecture of Pachycondyla striata Fr. Smith, 1858 (Formicidae, Ponerinae)

Nine nests of Pachycondyla striata Fr. Smith, 1858 were excavated between 2006 and 2007 at the UNESP university campus in Rio Claro, SP, southeastern Brazil. The P. striata population was larger in the two nests excavated in the months of August and November, 2006. The nests of this species are simple and poorly elaborated, with chambers and tunnels close to the ground surface. P. striata places the pupae in chambers isolated from the other individuals. The lack of chambers with the specific purpose of conditioning food and garbage underscores the simplicity of these nests.