Projeto, implementação e análise de um conversor CC-CC de alto ganho e alto rendimento para aplicações fotovoltaicas

In recent years the photovoltaic generation has had greater insertion in the energy mix of the most developed countries, growing at annual rates of over 30%. The pressure for the reduction of pollutant emissions, diversification of the energy mix and the drop in prices are the main factors driving this growth. Grid tied systems plays an important role in alleviating the energy crisis and diversification of energy sources. Among the grid tied systems, building integrated photovoltaic systems suffers from partial shading of the photovoltaic modules and consequently the energy yield is reduced. In such cases, classical forms of modules connection do not produce good results and new techniques have been developed to increase the amount of energy produced by a set of modules. In the parallel connection technique of photovoltaic modules, a high voltage gain DC-DC converter is required, which is relatively complex to build with high efficiency. The current-fed isolated converters explored in this work have some desirable characteristics for this type of application, such as: low input current ripple and input voltage ripple, high voltage gain, galvanic isolation, feature high power capacity and it achieve soft switching in a wide operating range. This study presents contributions to the study of a high gain and high efficiency DC-DC converter for use in a parallel system of photovoltaic generation, being possible the use in a microinverter or with central inverter. The main contributions of this work are: analysis of the active clamping circuit operation proposing that the clamp capacitor connection must be done on the negative node of the power supply to reduce the input current ripple and thus reduce the filter requirements; use of a voltage doubler in the output rectifier to reduce the number of components and to extend the gain of the converter; detailed study of the converter components in order to raise the efficiency; obtaining the AC equivalent model and control system design. As a result, a DC-DC converter with high gain, high efficiency and without electrolytic capacitors in the power stage was developed. In the final part of this work the DC-DC converter operation connected to an inverter is presented. Besides, the DC bus controller is designed and are implemented two maximum power point tracking algorithms. Experimental results of full system operation connected to an emulator and subsequently to a real photovoltaic module are also given.

Virtual-Build-to-Order as a Mass Customization Order Fulfilment Model

Virtual-build-to-order (VBTO) is a form of order fulfilment system in which the producer has the ability to search across the entire pipeline of finished stock, products in production and those in the production plan, in order to find the best product for a customer. It is a system design that is attractive to Mass Customizers, such as those in the automotive sector, whose manufacturing lead time exceeds their customers' tolerable waiting times, and for whom the holding of partly-finished stocks at a fixed decoupling point is unattractive or unworkable. This paper describes and develops the operational concepts that underpin VBTO, in particular the concepts of reconfiguration flexibility and customer aversion to waiting. Reconfiguration is the process of changing a product's specification at any point along the order fulfilment pipeline. The extent to which an order fulfilment system is flexible or inflexible reveals itself in the reconfiguration cost curve, of which there are four basic types. The operational features of the generic VBTO system are described and simulation is used to study its behaviour and performance. The concepts of reconfiguration flexibility and floating decoupling point are introduced and discussed.

Monitorização do teor de humidade do solo para a condução de rega em estufa numa cultura de alface

Dissertação de Mestrado, Engenharia e Gestão de Sistemas de Água, 23 de Junho de 2016, Universidade dos Açores.

Metodologia participativa para repositórios de recursos educacionais abertos

This research deals with the use of a participatory design methodology to develop a repository of open educational resources, the Arcaz. Discusses key aspects of neutrality and determinism of technology within the context of Social Studies of Science and Technology and presents some concepts of critical theory of technology related to the democratic construction of technological artifacts. Discusses the philosophical heritage of the movements that led to the emergence of free software, open education and open educational resources and argues that participatory design share similar ideals. It presents concepts of human-computer interaction, interaction design and user centered design, important to enhance the user experience in information systems. It addresses the participatory design as a methodology that allows the democratic participation of users in the technological construction, promoting mutual learning and active voice for the participants. Develops a participatory design methodology adapted to the Arcaz context of use and provides the procedures for the meetings conducted to apply participatory design techniques to the repository and the results obtained. It concludes with a study of some of the interventions suggested in the system and orientations for future applications of participatory practices in the development of the repository and a list of best practices, focusing on ethical principles that should guide the participatory design.

Joint Optimization for Social Content Delivery in Wireless Networks

Over the last decade, success of social networks has significantly reshaped how people consume information. Recommendation of contents based on user profiles is well-received. However, as users become dominantly mobile, little is done to consider the impacts of the wireless environment, especially the capacity constraints and changing channel. In this dissertation, we investigate a centralized wireless content delivery system, aiming to optimize overall user experience given the capacity constraints of the wireless networks, by deciding what contents to deliver, when and how. We propose a scheduling framework that incorporates content-based reward and deliverability. Our approach utilizes the broadcast nature of wireless communication and social nature of content, by multicasting and precaching. Results indicate this novel joint optimization approach outperforms existing layered systems that separate recommendation and delivery, especially when the wireless network is operating at maximum capacity. Utilizing limited number of transmission modes, we significantly reduce the complexity of the optimization. We also introduce the design of a hybrid system to handle transmissions for both system recommended contents ('push') and active user requests ('pull'). Further, we extend the joint optimization framework to the wireless infrastructure with multiple base stations. The problem becomes much harder in that there are many more system configurations, including but not limited to power allocation and how resources are shared among the base stations ('out-of-band' in which base stations transmit with dedicated spectrum resources, thus no interference; and 'in-band' in which they share the spectrum and need to mitigate interference). We propose a scalable two-phase scheduling framework: 1) each base station obtains delivery decisions and resource allocation individually; 2) the system consolidates the decisions and allocations, reducing redundant transmissions. Additionally, if the social network applications could provide the predictions of how the social contents disseminate, the wireless networks could schedule the transmissions accordingly and significantly improve the dissemination performance by reducing the delivery delay. We propose a novel method utilizing: 1) hybrid systems to handle active disseminating requests; and 2) predictions of dissemination dynamics from the social network applications. This method could mitigate the performance degradation for content dissemination due to wireless delivery delay. Results indicate that our proposed system design is both efficient and easy to implement.

JOINT ENERGY BEAMFORMING AND TIME ASSIGNMENT FOR COOPERATIVE WIRELESS POWERED NETWORKS

Wireless power transfer (WPT) and radio frequency (RF)-based energy har- vesting arouses a new wireless network paradigm termed as wireless powered com- munication network (WPCN), where some energy-constrained nodes are enabled to harvest energy from the RF signals transferred by other energy-sufficient nodes to support the communication operations in the network, which brings a promising approach for future energy-constrained wireless network design. In this paper, we focus on the optimal WPCN design. We consider a net- work composed of two communication groups, where the first group has sufficient power supply but no available bandwidth, and the second group has licensed band- width but very limited power to perform required information transmission. For such a system, we introduce the power and bandwidth cooperation between the two groups so that both group can accomplish their expected information delivering tasks. Multiple antennas are employed at the hybrid access point (H-AP) to en- hance both energy and information transfer efficiency and the cooperative relaying is employed to help the power-limited group to enhance its information transmission throughput. Compared with existing works, cooperative relaying, time assignment, power allocation, and energy beamforming are jointly designed in a single system. Firstly, we propose a cooperative transmission protocol for the considered system, where group 1 transmits some power to group 2 to help group 2 with information transmission and then group 2 gives some bandwidth to group 1 in return. Sec- ondly, to explore the information transmission performance limit of the system, we formulate two optimization problems to maximize the system weighted sum rate by jointly optimizing the time assignment, power allocation, and energy beamforming under two different power constraints, i.e., the fixed power constraint and the aver- age power constraint, respectively. In order to make the cooperation between the two groups meaningful and guarantee the quality of service (QoS) requirements of both groups, the minimal required data rates of the two groups are considered as constraints for the optimal system design. As both problems are non-convex and have no known solutions, we solve it by using proper variable substitutions and the semi-definite relaxation (SDR). We theoretically prove that our proposed solution method can guarantee to find the global optimal solution. Thirdly, consider that the WPCN has promising application potentials in future energy-constrained net- works, e.g., wireless sensor network (WSN), wireless body area network (WBAN) and Internet of Things (IoT), where the power consumption is very critical. We investigate the minimal power consumption optimal design for the considered co- operation WPCN. For this, we formulate an optimization problem to minimize the total consumed power by jointly optimizing the time assignment, power allocation, and energy beamforming under required data rate constraints. As the problem is also non-convex and has no known solutions, we solve it by using some variable substitutions and the SDR method. We also theoretically prove that our proposed solution method for the minimal power consumption design guarantees the global optimal solution. Extensive experimental results are provided to discuss the system performance behaviors, which provide some useful insights for future WPCN design. It shows that the average power constrained system achieves higher weighted sum rate than the fixed power constrained system. Besides, it also shows that in such a WPCN, relay should be placed closer to the multi-antenna H-AP to achieve higher weighted sum rate and consume lower total power.

the plenoptic sensor

In this thesis, we will introduce the innovative concept of a plenoptic sensor that can determine the phase and amplitude distortion in a coherent beam, for example a laser beam that has propagated through the turbulent atmosphere.. The plenoptic sensor can be applied to situations involving strong or deep atmospheric turbulence. This can improve free space optical communications by maintaining optical links more intelligently and efficiently. Also, in directed energy applications, the plenoptic sensor and its fast reconstruction algorithm can give instantaneous instructions to an adaptive optics (AO) system to create intelligent corrections in directing a beam through atmospheric turbulence. The hardware structure of the plenoptic sensor uses an objective lens and a microlens array (MLA) to form a mini “Keplerian” telescope array that shares the common objective lens. In principle, the objective lens helps to detect the phase gradient of the distorted laser beam and the microlens array (MLA) helps to retrieve the geometry of the distorted beam in various gradient segments. The software layer of the plenoptic sensor is developed based on different applications. Intuitively, since the device maximizes the observation of the light field in front of the sensor, different algorithms can be developed, such as detecting the atmospheric turbulence effects as well as retrieving undistorted images of distant objects. Efficient 3D simulations on atmospheric turbulence based on geometric optics have been established to help us perform optimization on system design and verify the correctness of our algorithms. A number of experimental platforms have been built to implement the plenoptic sensor in various application concepts and show its improvements when compared with traditional wavefront sensors. As a result, the plenoptic sensor brings a revolution to the study of atmospheric turbulence and generates new approaches to handle turbulence effect better.

Synthetic regulation of eukaryotic gene expression by noncoding RNA

Synthetic biological systems promise to combine the spectacular diversity of biological functionality with engineering principles to design new life to address many pressing needs. As these engineered systems advance in sophistication, there is ever-greater need for customizable, situation-specific expression of desired genes. However, existing gene control platforms are generally not modular, or do not display performance requirements required for robust phenotypic responses to input signals. This work expands the capabilities of eukaryotic gene control in two important directions.

For development of greater modularity, we extend the use of synthetic self-cleaving ribozyme switches to detect changes in input protein levels and convey that information into programmed gene expression in eukaryotic cells. We demonstrate both up- and down-regulation of levels of an output transgene by more than 4-fold in response to rising input protein levels, with maximal output gene expression approaching the highest levels observed in yeast. In vitro experiments demonstrate protein-dependent ribozyme activity modulation. We further demonstrate the platform in mammalian cells. Our switch devices do not depend on special input protein activity, and can be tailored to respond to any input protein to which a suitable RNA aptamer can be developed. This platform can potentially be employed to regulate the expression of any transgene or any endogenous gene by 3’ UTR replacement, allowing for more complex cell state-specific reprogramming.

We also address an important concern with ribozyme switches, and riboswitch performance in general, their dynamic range. While riboswitches have generally allowed for versatile and modular regulation, so far their dynamic ranges of output gene modulation have been modest, generally at most 10-fold. We address this shortcoming by developing a modular genetic amplifier for near-digital control of eukaryotic gene expression. We combine ribozyme switch-mediated regulation of a synthetic TF with TF-mediated regulation of an output gene. The amplifier platform allows for as much as 20-fold regulation of output gene expression in response to input signal, with maximal expression approaching the highest levels observed in yeast, yet being tunable to intermediate and lower expression levels. EC50 values are more than 4 times lower than in previously best-performing non-amplifier ribozyme switches. The system design retains the modular-input architecture of the ribozyme switch platform, and the near-digital dynamic ranges of TF-based gene control.

Together, these developments suggest great potential for the wide applicability of these platforms for better-performing eukaryotic gene regulation, and more sophisticated, customizable reprogramming of cellular activity.

Water production function of maize for Northeast Brazil.

Estudou-se atraves de um experimento em blocos ao acaso, os efeitos de quatro niveis de nitrogenio, em diferentes condicoes de umidade, sobre os estagios de crescimento, embonecamento, formacao de graos e prdutividade do milho (Zea mays L.) e as relacoes entre a produtividade e os tres primeiros estagios. Os fatores da resposta de producaobaseados na equacao de Doorenbos e Kassam variaram acentuadamente, nao so com os diferentes estatios de crescimento, mas tambem com diferentes niveis de nitrogenio e os diferentes niveis de agua. Assim, esta equacao nao pareceu ser valida para explicar a resposta de produtividade a niveis de agua. Sugeriu-se um equacao linear modificada. Nesta equacao, a intercessao K1 e inclinacao K2 sao os fatores da resposta de producao. Estes fatores para a cultura do milho foram desenvolvidos para todos os quatro estagios de crescimento e nveis de nitrogenio. Pode-se obter uma eficiencia media do uso de agua, em termos de produtividade, de, aproximadamente, 57,5 kg/ha-cm de agua, sendo, contudo, pequeno o incremento, em face dos niveis crescentes de nitrogenio aplicado ate 120 kg/ha. Os coeficientes de cutura (Kc) calculados estao muito abaixo da estimativa da FAO, para todos os niveis de nitrogenio. Por essa razao, deve haver consideravel economica de agua se estes coeficientes forem usados em lugar da estimativa da FAO. A informacao mostradapode imediatamente ser utilizada para turno de irrigacao e para projetos de irrigacao suplementar planejado para as condicoes doe Nordeste do Brasil.

MILITARY VEHICLE OPTIMIZATION AND CONTROL

It is remarkable that there are no deployed military hybrid vehicles since battlefield fuel is approximately 100 times the cost of civilian fuel. In the commercial marketplace, where fuel prices are much lower, electric hybrid vehicles have become increasingly common due to their increased fuel efficiency and the associated operating cost benefit. An absence of military hybrid vehicles is not due to a lack of investment in research and development, but rather because applying hybrid vehicle architectures to a military application has unique challenges. These challenges include inconsistent duty cycles for propulsion requirements and the absence of methods to look at vehicle energy in a holistic sense. This dissertation provides a remedy to these challenges by presenting a method to quantify the benefits of a military hybrid vehicle by regarding that vehicle as a microgrid. This innovative concept allowed for the creation of an expandable multiple input numerical optimization method that was implemented for both real-time control and system design optimization. An example of each of these implementations was presented. Optimization in the loop using this new method was compared to a traditional closed loop control system and proved to be more fuel efficient. System design optimization using this method successfully illustrated battery size optimization by iterating through various electric duty cycles. By utilizing this new multiple input numerical optimization method, a holistic view of duty cycle synthesis, vehicle energy use, and vehicle design optimization can be achieved.

Enotourism – more than a life style

Enotourism is a relatively new form of sustainable tourism. But is more than a lifestyle. The Douro landscape reflects its ancient and deep connection with the culture of wine, creating a picture of Man and Nature working side by side in search of the perfect wine. Lifestyle typically reflects: an individual's attitude, a way of life, values, or world view. Practical implications - the results suggest that there is scope for developing wine tourism products to attract tourists and which could be used to promote the Douro Valley region as a centre for enotourism. The beautifully unique landscape of the Douro was one of the reasons that made it a World Heritage site in 2001. There isn´t in Portugal an autonomous strategy process to define enotourism. Is a legal problem when we try to analyse the process or a data base to find information about enotourism players. So, how do winery operators, particularly those running small or family businesses, cope with the new developments occurring in the world of wines? The present study examines these issues from the perspective of a group of Portuguese winery operators. Our proposal in this research, is to analyse how many wineris or enotecas are hable to develop enotourism with a legal process. The results of the study reflect the level of education of employees, the seasonal nature of tourism, the improvements in its promotion and the need for greater support from local government. A key aspect is respect for the people who call the location home, the culture and customs of the area, and the socio-economic system. Design/methodology/approach - The methodology employed for this study consisted of a combination of surveys, interviews and field observations with the suppliers in the traditional wine‐producing region, Douro Valley, or Porto wine region, in the north of Portugal. The results of this investigation are almost analisys made inside the villages and also us wineries and enotecas. From the 30 winemakers that we visited, only 2 have an enotourism service acording to legislation and have a certificate that allows to pratices. It was very hard but it is an open field to future researchs (TOMÁS López‐Guzmán,et al, 2011). From the 30 wineries we have analysed only 2 were enotourism with a legal basis. Enotourism is on the travel agencies department and most of the wineries don´t have the legal licenses. Despite of most tourism agencies see enoturism as a segment of the industry with tremendous growth potential, stating that in some regions, it's only functioning at 20% of its full potential. Enotourism development guidelines and management practices are applicable to all forms of tourism in all destination types, including mass tourism and the various niche tourism segments.

Constructs in Knowledge Organization Systems: Rhythm in Time, Intention, and Form

In the context of the International Society for Knowledge Organization, we often consider knowledge organization systems to comprise catalogues, thesauri, and bibliothecal classification schemes – schemes for library arrangement. In recent years we have added ontologies and folksonomies to our sphere of study. In all of these cases it seems we are concerned with improving access to information. We want a good system.And much of the literature from the late 19th into the late 20th century took that as their goal – to analyze the world of knowledge and the structures of representing it as its objects of study; again, with the ethos for creating a good system. In most cases this meant we had to be correct in our assertions about the universe of knowledge and the relationships that obtain between its constituent parts. As a result much of the literature of knowledge organization is prescriptive – instructing designers and professionals how to build or use the schemes correctly – that is to maximize redundant success in accessing information.In 2005, there was a turn in some of the knowledge organization literature. It has been called the descriptive turn. This is in relation to the otherwise prescriptive efforts of researchers in KO. And it is the descriptive turn that makes me think of context, languages, and cultures in knowledge organization–the theme of this year’s conference.Work in the descriptive turn questions the basic assumptions about what we want to do when we create, implement, maintain, and evaluate knowledge organization systems. Following on these assumptions researchers have examined a wider range of systems and question the motivations behind system design. Online websites that allow users to curate their own collections are one such addition, for example Pinterest (cf., Feinberg, 2011). However, researchers have also looked back at other lineages of organizing to compare forms and functions. For example, encyclopedias, catalogues raisonnés, archival description, and winter counts designed and used by Native Americans.In this case of online curated collections, Melanie Feinberg has started to examine the craft of curation, as she calls it. In this line of research purpose, voice, and rhetorical stance surface as design considerations. For example, in the case of the Pinterest, users are able and encouraged to create boards. The process of putting together these boards is an act of curation in contemporary terminology. It is describing this craft that comes from the descriptive turn in KO.In the second case, when researchers in the descriptive turn look back at older and varied examples of knowledge organization systems, we are looking for a full inventory of intent and inspiration for future design. Encyclopedias, catalogues raisonnés, archival description, and works of knowledge organization in other cultures provide a rich world for the descriptive turn. And researchers have availed themselves of this.

Konstruktive und funktionale Entwicklung eines selbststeuernden Unterflurbewässerungsverfahrens

Unter Einfluss des gegenwärtigen Klimawandels sowie dem Anstieg der Erdbevölkerung ist der effiziente Umgang mit den vorhandenen Wasserressourcen ein zentrales Thema in der Bewässerungslandwirtschaft. Die Unterflurbewässerung ist ein seit Jahrtausenden bekanntes Verfahren, bei dem das Bewässerungswasser unterhalb der Erdoberfläche aufgebracht wird und der Pflanze direkt im Wurzelraum zur Verfügung steht. Die Gefäßbewässerung ist ein selbststeuerndes Verfahren wobei die Wassergabe aus dem unglasierten Tongefäß aufgrund der im umgebenden Boden anliegenden Saugspannung erfolgt. Diese wassersparende und dem Wasserbedarf der Pflanze angepasste Bewässerungsweise ist Grundlage der Überlegungen und Untersuchungen der vorliegenden Arbeit. Ausgehend von dem Gedanken der Kombination der Vorteile der Gefäßbewässerung mit denen moderner Materialien, die eine maschinelle Installation ermöglichen und eine lange Lebensdauer aufweisen, wurde die Entwicklung einer selbststeuernden Bewässerung verfolgt. Materialrecherchen und eine Auswahl als geeignet identifizierter Materialien führten zu Laboruntersuchungen an Hand derer die Darcy-Eigenschaften (linearer Zusammenhang zwischen Volumenstrom und anliegendem Druck) überprüft wurden. Membranen erwiesen sich danach als geeignet, so dass an einer ausgewählten Schlauchmembran weitergehende Untersuchungen zum Einsatz für die Bewässerung vorgenommen wurden. Diese umfassten Langzeitlaborversuche im Boden zur Untersuchung der Entwicklung der Durchlässigkeit der Schlauchmembran über die Zeit, sowie zum Nachweis der Selbststeuerung des Systems. Mit den gewonnenen Ergebnissen war es möglich großmaßstäbliche Versuche im Gewächshaus zu realisieren, bei der die Schlauchmembran im Vergleich zur Tropfbewässerung hinsichtlich Wasserverbrauch und Ernteertrag an Standorten in Deutschland und Algerien getestet wurde. Diese Gewächshausversuche zeigten vielversprechende Ergebnisse für die Membranschlauchbewässerung mit im Vergleich zur Tropfbewässerung erhöhten Erträgen bei gleichzeitig geringerem Wasserverbrauch. Dies wurde besonders bei Verwendung von Bewässerungswasser mit erhöhtem Salzgehalt deutlich. Sorgfältiger Beachtung bedarf die Wasserqualität, da die Membranschlauchbewässerung auf Wasserverunreinigungen mit Durchflussverminderung reagiert, die sich nachteilig auf die Pflanzenentwicklung auswirkt. Aufgabe weiterer Forschungen muss es demnach sein, technische Verfahren zu entwickeln, die die langfristige Leistungsfähigkeit der Membran im Bewässerungsbetrieb aufrechterhalten.

Improving magnetic coupling for battery charging through 3D magnetic flux

The spatial distribution of the magnetic field and the coupling between the coils in the Wireless Power Transfer (WPT) systems is an important aspect to consider in the system design and efficiency optimization. The presented study in this paper is based on tests performed on a physical model. The transmitting (primary) equipment, is an electrical three-phase system, capable to be connected in star or delta (both electrically and geometrically). The measured results allow to describe graphically the magnetic field distribution in three dimensions. The analytical formulas aim to help to understand and to quantify the physical phenomena but they cannot be considered a universal approach and the measurement results help to understand better the observable facts. In the WPT, the key issues that will influence the efficiency, are the alignment of the coils, the spatial orientation of the magnetic field, the detachment and the tilt between the windings, all they changing the magnetic coupling between the transmitter and the receiver of energy. This research is directed not only to the magnetic field distribution but finally, to optimize the energy transfer efficiency.

Design of an irrigation distribution system for a project in the Sacramento Valley /

Thesis (M.S. in Irrigation)--University of California, Berkeley, 1916.