Energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 21≤Z≤28

We report calculations of energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 21≤Z≤28. The General-Purpose Relativistic Atomic Structure Package is adopted for calculating energy levels and radiative rates, while for determining the collision strengths and subsequently the excitation rates, the Dirac Atomic R-matrix Code is used. Oscillator strengths, radiative rates, and line strengths are listed for all E1, E2, M1, and M2 transitions among the lowest 24 levels of the Li-like ions considered. Collision strengths have been averaged over a Maxwellian velocity distribution, and the effective collision strengths obtained are given over a wide temperature range up to 10^7.8 K. Additionally, lifetimes are listed for all calculated levels of these ions. Finally, extensive comparisons are made with results available in the literature, as well as with our analogous calculations for all parameters with the Flexible Atomic Code, in order to assess the accuracy of the results.

Energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 12≤Z≤20

We report calculations of energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 12≤Z≤20. The grasp (general-purpose relativistic atomic structure package) is adopted for calculating energy levels and radiative rates, while for determining the collision strengths and subsequently the excitation rates, the Dirac atomic R-matrix code is used. Oscillator strengths, radiative rates, and line strengths are reported for all E1, E2, M1, and M2 transitions among the lowest 24 levels of the Li-like ions considered. Collision strengths have been averaged over a Maxwellian velocity distribution, and the effective collision strengths obtained are reported over a wide temperature range up to 10^7.4 K. Additionally, lifetimes are also listed for all calculated levels of the ions. Finally, extensive comparisons are made with results available in the literature, as well as with our parallel calculations for all parameters with the Flexible Atomic Code, in order to assess the accuracy of the reported results. 

Electron impact excitation of Be-like ions: a comparison of DARC and ICFT results

Emission lines of Be-like ions are frequently observed in astrophysical plasmas, and many are useful for density and temperature diagnostics. However, accurate atomic data for energy levels, radiative rates (A-values) and effective electron excitation collision strengths ($\Upsilon$) are required for reliable plasma modelling. In general it is reasonably straightforward to calculate energy levels and A- values to a high level of accuracy. By contrast, considerable effort is required to calculate $\Upsilon$, and hence it is not always possible to assess the accuracy of available data. Recently, two independent calculations (adopting the $R$-matrix method) but with different approaches (DARC and ICFT) have appeared for a range of Be-like ions. Therefore, in this work we compare the two sets of $\Upsilon$, highlight the large discrepancies for a significant number of transitions and suggest possible reasons for these.

'Off-On' Fluorescent Sensors for Physiological levels of Magnesium Ions based on Photoinduced Electron Transfer (PET) which also behave as OR Logic Gates

The fluorescence of molecules 1-3 is enhanced by factors of up to 67 in the presence of magnesium and calcium ions in neutral water which allows the selective monitoring of magnesium ions under simulated physiological conditions and permits the construction of truth tables with OR logic when these molecules are viewed as ion input-photon output molecuIar devices.

Mechanisms of plant resistance to metal and metalloid ions and potential biotechnological applications

Metal and metalloid resistances in plant species and genotypes/accessions are becoming increasingly better understood at the molecular and physiological level. Much of the recent focus into metal resistances has been on hyperaccumulators as these are excellent systems to study resistances due to their very abnormal metal(loid) physiology and because of their biotechnological potential. Advances into the mechanistic basis of metal(loid) resistances have been made through the investigation of metal(loid) transporters, the construction of mutants with altered metal(loid) transport and metabolism, a better understanding of the genetic basis of resistance and hyperaccumulation and investigations into the role of metal(loid) ion chelators. This review highlights these recent advances. © Springer 2005.

Toxic interactions of metal ions (Cd2+, Pb2+, Zn2+ and Sb3- on in vitro biomass production of ectomycorrhizal fungi

A number of ectomycorrhizal (ECM) fungi, from sites uncontaminated by toxic metals, were investigated to determine their sensitivity to Cd^2-, Pb²⁺, Zn²⁺ and Sb^3-, measured as an inhibition of fungal biomass production. Isolates were grown in liquid media amended with the metals, individually (over a range of concentrations) and in combination (at single concentrations) to determine any significant interactions between the metals. Significant interspecific variation in sensitivity to Cd²⁺ and Zn²⁺ was recorded, while Pb²⁺ and Sb^3- individually had little effect. The presence of Pb²⁺ and Sb^3- in the media did however, ameliorate Cd²⁺ and Zn²⁺ toxicity in some circumstances. Interactions between Cd²⁺ and Zn²⁺ were investigated further over a range of concentrations. Zn²⁺ was found to significantly ameliorate the toxicity of Cd²⁺ to three of the four isolates tested. The influence of Zn²⁺ varied between ECM species and with the concentrations of metals tested.

Calibration of BAS-TR image plate response to high energy (3-300 MeV) carbon ions

The paper presents the calibration of Fuji BAS-TR image plate (IP) response to high energy carbon ions of different charge states by employing an intense laser-driven ion source, which allowed access to carbon energies up to 270 MeV. The calibration method consists of employing a Thomson parabola spectrometer to separate and spectrally resolve different ion species, and a slotted CR-39 solid state detector overlayed onto an image plate for an absolute calibration of the IP signal. An empirical response function was obtained which can be reasonably extrapolated to higher ion energies. The experimental data also show that the IP response is independent of ion charge states.

Observation of the inhomogeneous spatial distribution of MeV ions accelerated by the hydrodynamic ambipolar expansion of clusters

An inhomogeneous spatial distribution of laser accelerated carbon/oxygen ions produced via the hydrodynamic ambipolar expansion of CO₂ clusters has been measured by using CR-39 detectors. An inhomogeneous etch pits spatial distribution has appeared on the etched CR-39 detector installed on the laser propagation direction, while homogeneous ones are appeared on those installed at 45°and 90°from the laser propagation direction. From the range of ions in CR-39 obtained by using the multi-step etching technique, the averaged energies of carbon/oxygen ions for all directions are determined as 0.78 ± 0.09 MeV/n. The number of ions in the laser propagation direction is about 1.5 times larger than those in other directions. The inhomogeneous etch pits spatial distribution in the laser propagation direction could originate from an ion beam collimation and modulation by the effect of electromagnetic structures created in the laser plasma.

Beamed neutron emission driven by laser accelerated light ions

Highly anisotropic, beam-like neutron emission with peak flux of the order of 10^9 n/sr was obtained from light nuclei reactions in a pitcher–catcher scenario, by employing MeV ions driven by subpetawatt laser. The spatial profile of the neutron beam, fully captured for the first time by employing a CR39 nuclear track detector, shows a FWHMdivergence angle of ~70 deg, with a peak flux nearly an order of magnitude higher than the isotropic component elsewhere. The observed beamed flux of neutrons is highly favourable for a wide range of applications, and indeed for further transport and moderation to thermal energies. A systematic study employing various combinations of pitcher–catcher materials indicates the dominant reactions being d(p, n+p)1Hand d(d,n)3He. Albeit insufficient cross-section data are available for modelling, the observed anisotropy in the neutrons’ spatial and spectral profiles are most likely related to the directionality and high energy of the projectile ions.

Guided post-acceleration of laser-driven ions by a miniature modular structure

All-optical approaches to particle acceleration are currently attracting a significant research effort internationally. Although characterized by exceptional transverse and longitudinal emittance, laser-driven ion beams currently have limitations in terms of peak ion energy, bandwidth of the energy spectrum and beam divergence. Here we introduce the concept of a versatile, miniature linear accelerating module, which, by employing laser-excited electromagnetic pulses directed along a helical path surrounding the laser-accelerated ion beams, addresses these shortcomings simultaneously. In a proof-of-principle experiment on a university-scale system, we demonstrate post-acceleration of laser-driven protons from a flat foil at a rate of 0.5 GeVm^-1, already beyond what can be sustained by conventional accelerator technologies, with dynamic beam collimation and energy selection. These results open up new opportunities for the development of extremely compact and cost-effective ion accelerators for both established and innovative applications.

Photoionization cross section calculations for the halogen-like ions Kr + and Xe +

Photoionization cross section calculations on the halogen-like ions; Kr + and Xe + have been performed for a photon energy range from each ion threshold to 15 eV, using large-scale close-coupling calculations within the Dirac--Coulomb R -matrix approximation. The results from our theoretical work are compared with recent measurements made at the ASTRID merged-beam set-up at the University of Aarhus in Denmark and from the Fourier transform ion cyclotron resonance trap method at the SOLEIL synchrotron radiation facility in Saint-Aubin, France Bizau et al (2011 J. Phys. B: At. Mol. Opt. Phys. 44 055205) and the advanced light source M{ü}ller (2012 private communication), Aguliar et al (2012 J. Phys.: Conf. Ser . at press). For each of these complex ions our theoretical cross section results over the photon energy range investigated are seen to be in excellent agreement with experiment. Resonance energy positions and quantum defects of the prominent Rydberg resonances series identified in the spectra are compared with experiment for these complex halogen-like ions.

Electron-impact excitation of beryllium and its ions

Inelastic electron scattering from light atomic species is of fundamental importance and has significant applications in fusion-plasma modeling. Therefore, it is of interest to apply advanced nonperturbative, close-coupling methods to the determination of electron-impact excitation for these atoms. Here we present the results of R matrix with pseudostate (RMPS) calculations of electron-impact excitation cross sections through the n=4 terms in Be, Be+, Be2+, and Be3+. In order to determine the effects of coupling of the bound states to the target continuum in these species, we compare the RMPS results with those from standard R-matrix calculations. In addition, we have performed time-dependent close-coupling calculations for excitation from the ground and the metastable terms of Be+ and the metastable term of Be3+. In general, these results are found to agree with those from our RMPS calculations. The full set of data resulting from this work is now available on the Oak Ridge National Laboratory Controlled Fusion Atomic Data Center web site, and will be employed for collisional-radiative modeling of Be in magnetically confined plasmas.