Blood Lead Levels in Children and Environmental Lead Contamination in Miami Inner City, Florida

Studies have shown that the environmental conditions of the home are important predictors of health, especially in low-income communities. Understanding the relationship between the environment and health is crucial in the management of certain diseases. One health outcome related to the home environment among urban, minority, and low-income children is childhood lead poisoning. The most common sources of lead exposure for children are lead paint in older, dilapidated housing and contaminated dust and soil produced by accumulated residue of leaded gasoline. Blood lead levels (BLL) as low as 10 μg/dL in children are associated with impaired cognitive function, behavior difficulties, and reduced intelligence. Recently, it is suggested that the standard for intervention be lowered to BLL of 5 μg /dl. The objectives of our report were to assess the prevalence of lead poisoning among children under six years of age and to quantify and test the correlations between BLL in children and lead exposure levels in their environment. This cross-sectional analysis was restricted to 75 children under six years of age who lived in 6 zip code areas of inner city Miami. These locations exhibited unacceptably high levels of lead dust and soil in areas where children live and play. Using the 5 μg/dL as the cutoff point, the prevalence of lead poisoning among the study sample was 13.33%. The study revealed that lead levels in floor dust and window sill samples were positively and significantly correlated with BLL among children (p < 0.05). However, the correlations between BLL and the soil, air, and water samples were not significant. Based on this pilot study, a more comprehensive environmental study in surrounding inner city areas is warranted. Parental education on proper housecleaning techniques may also benefit those living in the high lead-exposed communities of inner city Miami.

An analysis of the on-time graduation rate in the two-year program at National Taipei Institute of Technology in Taiwan

Taiwan's technical vocational educational system includes three levels: (1) institutes of technology (two and four year programs), (2) junior colleges (two, three and five year programs), and (3) senior vocational schools. Two-year junior colleges enroll their students through two channels: (1) based on results of the Particular Screening Entrance Examination (PSEE), (2) based on the Joint College Entrance Examination (JCEE). The PSEE has two categories: Category I includes on-time graduates with excellent performance, which means that they are within the top ten of their classes; Category II students include award-winning students in talent contests who have achieved a minimum grade point average of 75%. The JCEE is a regular entrance examination given to any senior vocation school graduate.^ Basic courses have a great impact on the students' academic performance. The purpose of the study was to focus on the effectiveness of teaching mathematics in two-year junior colleges and to analyze and correlate the results of two-year junior college students' performance in calculus and on-time graduation. The target group consisted of 521 students enrolled at National Taipei Institute of Technology in 1993.^ Calculus is a very important course for engineering majors in two-year junior colleges and has a great impact on the students' academic performance. This retrospective study showed that there was a correlation between students' performance in calculus and on-time graduation after two years of study.^ The conclusions of the study urge the Ministry of Education to reform two-year junior college curriculum standards to emphasize basic rudimentary courses. It is recommended that engineering majors receive three hours of calculus per week as the current requirement of only two hours per week is inadequate. The future job market will require a technologically advanced labor force that can be trained in a higher education system. More channels of higher education for two-year junior college graduates should be made available for those wishing to pursue bachelor degrees. Additional work in calculus will not only enhance the opportunities for two-year junior college graduates to continue their pursuit of an advanced academic degree, but also serve them well as they seek career advancement. ^

An evaluation of exchange rate policy and economic adjustment in Nicaragua, 1993--1995

Since the late 1970's, but particularly since the mid-1980s, the economy of Nicaragua has had persistent and large macroeconomic imbalances, while GDP per-capita has declined to 1950s' levels. By the second half of the 1990s, huge fiscal deficits and a reduction of foreign financing resulted in record hyperinflation. The Sandinista government's (1979–1990) harsh stabilization program in 1988–89 had only modest and short-lived success. It was doomed by their inability to lower the public sector deficit due to the war, plus diminishing financial support from abroad. Hyperinflation stopped only after their 1990 electoral defeat ended the war and massive aid began to flow in. Five years later, macroeconomic stability is still very fragile. A sluggish recovery of export agriculture plus import liberalization, have impeded a reduction of huge trade and current account deficits. Facing the prospects of diminished aid flows, the government's strategy has hinged on the achievement of a real devaluation through a crawling-peg adjustment of the nominal rate. However, at the end of 1995 the situation of the external accounts was still critical, and the modest progress achieved was attributable to cyclical terms-of-trade improvement and changes in the political outlook of agricultural producers. Using a Computable General Equilibrium Model and a Social Accounting Matrix constructed for this dissertation, the importance of structural rigidities in production and demand in explaining such outcome is shown. It is shown that under the plausible structural assumptions incorporated in the model, the role of devaluation in the adjustment process is restricted by structural rigidities. Moreover, contrary to the premise of the orthodox economic thinking behind the economic program, it is the contractionary effect of devaluation more than its expenditure-switching effects that provide the basis for is use in solving the external sector's problems. A fixed nominal exchange rate is found to lead to adverse results. The broader conclusion that emerges from the study is that a new social compact and a rapid increase in infrastructure spending plus fiscal support for the traditional agro-export activities is at the center of a successful adjustment towards external viability in Nicaragua. ^

Predictors of first semester attrition and their relation to retention of generic associate degree nursing students

In community college nursing programs the high rate of attrition was a major concern to faculty and administrators. Since first semester attrition could lead to permanent loss of students and low retention in nursing programs, it was important to identify at-risk students early and develop proactive approaches to assist them to be successful. The goal of nursing programs was to graduate students who were eligible to take the national council licensing examination (RN). This was especially important during a time of critical shortage in the nursing workforce. ^ This study took place at a large, multi-campus community college, and used Tinto's (1975) Student Integration Model of persistence as the framework. A correlational study was conducted to determine whether the independent variables, past academic achievement, English proficiency, achievement tendency, weekly hours of employment and financial resources, could discriminate between the two grade groups, pass and not pass. Establishing the relationship between the selected variables and successful course completion might be used to reduce attrition and improve retention. Three research instruments were used to collect data. A Demographic Information form developed by the researcher was used to obtain academic data, the research questionnaire Measure of Achieving Tendency measured achievement motivation, and the Test of Adult Basic Education (TABE), Form 8, Level A, Tests 1, 4, and 5 measured the level of English proficiency. The Department of Nursing academic policy, requiring a minimum course grade of “C” or better was used to determine the final course outcome. A stepwise discriminant analysis procedure indicated that college language level and pre-semester grade point average were significant predictors of final course outcome. ^ Based on the findings of the study recommendations focused on assessing students' English proficiency prior to admission into the nursing program, an intensive remediation plan in language comprehension for at-risk students, and the selection of alternate textbooks and readings that more closely matched the English proficiency level of the students. A pilot study should be conducted to investigate the benefit of raising the admission grade point average. ^

Low temperature sintering semiconducting barium strontium titanate

Low temperature sintering has become a very important research area in ceramics processing and sintering as a promising process to obtain grain size below 100nm. For electronic ceramics, low temperature sintering is particularly difficult, because not only the required microstructure but also the desired electronic properties should be obtained. In this dissertation, the effect of liquid sintering aids and particle size (micrometer and nanometer) on sintering temperature and Positive Temperature Coefficient Resistivity (PTCR) property are investigated for Ba1-xSrxTiO3 (BST) doped with 0.2-0.3mol% Sb3+ (x = 0.1, 0.2, 0.3, 0.4 and 0.5). Different sintering aids with low melting point are used as sintering aids to decrease the sintering temperature for micrometer size BST particles. Micrometer size and nanometer size Ba1-xSrxTiO 3 (BST) particles are used to demonstrate the particle size effect on the sintering temperature for semiconducting BST. To reduce the sintering temperature, three processes are developed, i.e. 1 using sol-gel nanometer size Sb3+ doped powders with a sintering aid; 2 using micrometer size powders plus a sintering aid; and 3 using nanometer size Sb3+ doped powders with sintering aids. Grain size effect on PTCR characteristics is investigated through comparison between micrometer size powder sintered pellets and nanometer size powder sintered pellets. The former has lower resistivity at temperatures below the Curie temperature (Tc) and high resistivity at temperatures above the Curie temperature (Tc) along with higher ρ max/ρmin ratio (ρmax is the highest resistivity at temperatures above Tc, ρmin is the lowest resistivity at temperatures below Tc), whereas the latter has both higher ρ max and ρmin. Also, ρmax/ρmin is smaller than that of pellets with larger grain size. The reason is that the solid with small grain size has more grain boundaries than the solid with large grain size. The contribution z at room temperature and high temperature and a lower ρmax/ρmin ratio value.

Think before you eat: Calories and exercise equivalents presented on menus at point-of-choice

Although calorie information at the point-of-purchase at fast food restaurants is proposed as a method to decrease calorie choices and combat obesity, research results have been mixed. Much of the supportive research has weak methodology, and is limited. There is a demonstrated need to develop better techniques to assist consumers to make lower calorie food choices. Eating at fast food restaurants has been positively associated with weight gain. The current study explored the possibility of adding exercise equivalents (EE) (physical activity required to burn off the calories in the food), along with calorie information as a possible way to facilitate lower calorie choice at the point-of-choice in fast food restaurants. This three-group experimental study, in 18-34 year old, overweight and obese women, examines whether presenting caloric information in the form of EE at the point-of-choice at fast food restaurants, will lead to lower calorie food choices compared to presenting simple caloric information or no information at all. Methods. A randomized repeated measures experiment was conducted. Participants ordered a fast food meal from Burger King with menus that contained only the names of the food choices (Lunch 1). One week later (Lunch 2), study participants were given one of three menus that varied: no information, calorie information, or calorie information and EE. Study participants included 62 college aged students. Additionally, the study controlled for dietary restraint by blocking participants, before randomization, to the three groups. Results. A repeated measures analysis of variance was conducted. The study was not sufficiently powered, and while the study was designed to determine large effect sizes, a small effect size of .026, was determined. No significant differences were found in the foods ordered among the various menu conditions. Conclusion. Menu labeling alone might not be enough to reduce calories at the point-of-choice at restaurants. Additional research is necessary to determine if calorie information and EE at the point-of-choice would lead to fewer calories chosen at a meal. Studies should also look at long-term, repeated exposure to determine the effectiveness of calories and or EE at the point-of-choice at fast food restaurants.

Ab initio quantum chemical studies on neutral-radical reactions of ethynyl (C2H) and cyano (CN) with unsaturated hydrocarbons

An Ab Initio/RRKM study of the reaction mechanism and product branching ratios of neutral-radical ethynyl (C2H) and cyano (CN) radical species with unsaturated hydrocarbons is performed. The reactions studied apply to cold conditions such as planetary atmospheres including Titan, the Interstellar Medium (ISM), icy bodies and molecular clouds. The reactions of C2H and CN additions to gaseous unsaturated hydrocarbons are an active area of study. NASA's Cassini/Huygens mission found a high concentration of C2H and CN from photolysis of ethyne (C2H2) and hydrogen cyanide (HCN), respectively, in the organic haze layers of the atmosphere of Titan. The reactions involved in the atmospheric chemistry of Titan lead to a vast array of larger, more complex intermediates and products and may also serve as a chemical model of Earth's primordial atmospheric conditions. The C2H and CN additions are rapid and exothermic, and often occur barrierlessly to various carbon sites of unsaturated hydrocarbons. The reaction mechanism is proposed on the basis of the resulting potential energy surface (PES) that includes all the possible intermediates and transition states that can occur, and all the products that lie on the surface. The B3LYP/6-311g(d,p) level of theory is employed to determine optimized electronic structures, moments of inertia, vibrational frequencies, and zero-point energy. They are followed by single point higher-level CCSD(T)/cc-vtz calculations, including extrapolations to complete basis sets (CBS) of the reactants and products. A microcanonical RRKM study predicts single-collision (zero-pressure limit) rate constants of all reaction paths on the potential energy surface, which is then used to compute the branching ratios of the products that result. These theoretical calculations are conducted either jointly or in parallel to experimental work to elucidate the chemical composition of Titan's atmosphere, the ISM, and cold celestial bodies.<.

Low Temperature Sintering Semiconductive Barium Strontium Titanate

Low temperature sintering has become a very important research area in ceramics processing and sintering as a promising process to obtain grain size below 100nm. For electronic ceramics, low temperature sintering is particularly difficult, because not only the required microstructure but also the desired electronic properties should be obtained. In this dissertation, the effect of liquid sintering aids and particle size (micrometer and nanometer) on sintering temperature and Positive Temperature Coefficient Resistivity (PTCR) property are investigated for Ba1-xSrxTiO3 (BST) doped with 0.2-0.3mol% Sb3+ (x = 0.1,0.2,0.3,0.4 and 0.5). Different sintering aids with low melting point are used as sintering aids to decrease the sintering temperature for micrometer size BST particles. Micrometer size and nanometer size Ba1-xSrxTiO3 (BST) particles are used to demonstrate the particle size effect on the sintering temperature for semiconducting BST. To reduce the sintering temperature, three processes are developed, i.e. 1 using sol-gel nanometer size Sb3+ doped powders with a sintering aid; 2 using micrometer size powders plus a sintering aid; and 3 using nanometer size Sb3+ doped powders with sintering aids. Grain size effect on PTCR characteristics is investigated through comparison between micrometer size powder sintered pellets and nanometer size powder sintered pellets. The former has lower resistivity at temperatures below the Curie temperature (Tc) and high resistivity at temperatures above the Curie temperature (Tc) along with higher ñmax/ñmin ratio (ñmax is the highest resistivity at temperatures above Tc, ñmin is the lowest resistivity at temperatures below Tc), whereas the latter has both higher ñmax and ñmin. Also, ñmax/ñmin is smaller than that of pellets with larger grain size. The reason is that the solid with small grain size has more grain boundaries than the solid with large grain size. The contribution z at room temperature and high temperature and a lower ñmax/ñmin ratio value.

Think Before You Eat: Calories and Exercise Equivalents Presented on Menus at Point-of-Choice

Although calorie information at the point-of-purchase at fast food restaurants is proposed as a method to decrease calorie choices and combat obesity, research results have been mixed. Much of the supportive research has weak methodology, and is limited. There is a demonstrated need to develop better techniques to assist consumers to make lower calorie food choices. Eating at fast food restaurants has been positively associated with weight gain. The current study explored the possibility of adding exercise equivalents (EE) (physical activity required to burn off the calories in the food), along with calorie information as a possible way to facilitate lower calorie choice at the point-of-choice in fast food restaurants. This three-group experimental study, in 18-34 year old, overweight and obese women, examines whether presenting caloric information in the form of EE at the point-of-choice at fast food restaurants, will lead to lower calorie food choices compared to presenting simple caloric information or no information at all. Methods: A randomized repeated measures experiment was conducted. Participants ordered a fast food meal from Burger King with menus that contained only the names of the food choices (Lunch 1). One week later (Lunch 2), study participants were given one of three menus that varied: no information, calorie information, or calorie information and EE. Study participants included 62 college aged students. Additionally, the study controlled for dietary restraint by blocking participants, before randomization, to the three groups. Results: A repeated measures analysis of variance was conducted. The study was not sufficiently powered, and while the study was designed to determine large effect sizes, a small effect size of .026, was determined. No significant differences were found in the foods ordered among the various menu conditions. Conclusion: Menu labeling alone might not be enough to reduce calories at the point-of-choice at restaurants. Additional research is necessary to determine if calorie information and EE at the point-of-choice would lead to fewer calories chosen at a meal. Studies should also look at long-term, repeated exposure to determine the effectiveness of calories and or EE at the point-of-choice at fast food restaurants.

Annotated record and chemical composition of ferromanganese concretions and crusts sampled from the lakes and streams of Norway

The main objective of the project was to develop a geochemical method for exploration of ores associated with granitic rocks. Fe and Mn oxidates were sampled in streambeds and lakes from 129 localities in Southeastern Norway. 65 of these localities are situated in the northern Oslo Graben. The samples were examined mineralogically and chemically by a variety of methods. Geochemical maps of the element content in oxidates show regional distribution patterns for several elements. Sampling and analysis of oxidates can be used in exploration for mineralizations such as the Skrukkelia Mo-deposit in the northern Oslo Graben. New anomalies (especially for Zn and W) have been detected. Appendix I contains a description of samples, chemical and mineralogical determinations performed on the samples, backscattered electron image-, X-ray image- and scanning electron image pictures of the oxidate preparates. Appendix II contains spectral plots, point analysis with the microprobe, X-ray diffractograms, analytical results, correlation coefficient matrix, scatterplots, frequency distributions and information on data storage. Appendix III containS maps of the element content in oxidates.

Composition of sediments from the Arabian Sea

Thirty seven deep-sea sediment cores from the Arabian Sea were studied geochemically (49 major and trace elements) for four time slices during the Holocene and the last glacial, and in one high sedimentation rate core (century scale resolution) to detect tracers of past variations in the intensity of the atmospheric monsoon circulation and its hydrographic expression in the ocean surface. This geochemical multi-tracer approach, coupled with additional information on the grain size composition of the clastic fraction, the bulk carbonate and biogenic opal contents makes it possible to characterize the sedimentological regime in detail. Sediments characterized by a specific elemental composition (enrichment) originated from the following sources: river suspensions from the Tapti and Narbada, draining the Indian Deccan traps (Ti, Sr); Indus sediments and dust from Rajasthan and Pakistan (Rb, Cs); dust from Iran and the Persian Gulf (Al, Cr); dust from central Arabia (Mg); dust from East Africa and the Red Sea (Zr/Hf, Ti/Al). Corg, Cd, Zn, Ba, Pb, U, and the HREE are associated with the intensity of upwelling in the western Arabian Sea, but only those patterns that are consistently reproduced by all of these elements can be directly linked with the intensity of the southwest monsoon. Relying on information from a single element can be misleading, as each element is affected by various other processes than upwelling intensity and nutrient content of surface water alone. The application of the geochemical multi-tracer approach indicates that the intensity of the southwest monsoon was low during the LGM, declined to a minimum from 15,000-13,000 14C year BP, intensified slightly at the end of this interval, was almost stable during the Bölling, Alleröd and the Younger Dryas, but then intensified in two abrupt successions at the end of the Younger Dryas (9900 14C year BP) and especially in a second event during the early Holocene (8800 14C year BP). Dust discharge by northwesterly winds from Arabia exhibited a similar evolution, but followed an opposite course: high during the LGM with two primary sources-the central Arabian desert and the dry Persian Gulf region. Dust discharge from both regions reached a pronounced maximum at 15,000-13,000 14C year. At the end of this interval, however, the dust plumes from the Persian Gulf area ceased dramatically, whereas dust discharge from central Arabia decreased only slightly. Dust discharge from East Africa and the Red Sea increased synchronously with the two major events of southwest monsoon intensification as recorded in the nutrient content of surface waters. In addition to the tracers of past dust flux and surface water nutrient content, the geochemical multi-tracer approach provides information on the history of deep sea ventilation (Mo, S), which was much lower during the last glacial maximum than during the Holocene. The multi-tracer approach-i.e. a few sedimentological parameters plus a set of geochemical tracers widely available from various multi-element analysis techniques-is a highly applicable technique for studying the complex sedimentation patterns of an ocean basin, and, specifically in the case of the Arabian Sea, can even reveal the seasonal structure of climate change.