The impact of *experience, industry characteristics, and individual differences on audit risk and the extent of testing decisions: An empirical investigation

The first part of the study examined the effect of industry risk changes on perceived audit risk at the financial statement level and whether these changes depended on individual differences such as experience and tolerance for ambiguity. ^ Forty-eight auditors from two offices of one of the “Big 5” CPA firms participated in this study. The ANOVA results supported the effect of industry risk in the assessment of audit risk at the financial statement level. Higher industry risk was associated with higher perceived audit risk. Tolerance for ambiguity was also significant in explaining the changes in the assessment of audit risk. Auditors with a high tolerance for ambiguity perceived lower audit risk than auditors with a low tolerance for ambiguity. Although ANOVA results did not find experience to be significant, a t-test for experience showed it to be marginally significant and inversely related to audit risk. ^ The second part of this study examined whether differences in perceived audit risk at the financial statement level altered the extent, nature or timing of the planned auditing procedures. The results of the MANOVA suggested an overall audit risk effect at the financial statement level. Perceived audit risk was significant in explaining the variation in the number of hours planned for the total cycle and the number of hours p1anned for the tests of balances and details. Perceived audit risk was not significant in determining the analytical review procedures planned, but assessed inherent risk at the cycle level was significant. The higher the inherent risk the more analytical procedures were planned. Perceived audit risk was not significant in explaining the timing of the procedures, but individual differences were significant. The results showed that experienced auditors and those with a high tolerance for ambiguity were less likely to postpone the performance of the interim procedures or the time at which the majority of audit work would be done. ^

Gimme' A Break: Offering Sabbaticals as an Optional Leave Benefit in the Lodging Industry

ABSTRACT The purpose of this study is to investigate the extended leave programs offered by lodging companies in the United States and to suggest a model that could be used in the lodging industry. This model mirrors successful sabbatical leave programs offered by leading companies featured in the annual report, 100 Best Companies to Work For (from this point forward, referred to as 100 Best), published on-line by Fortune Magazine, 2013 (CNN, 2013). While extended leave programs are not entirely lacking in the industry, our research discovered that such leave systems are rare. According to the companies investigated that offer a sabbatical leave program, this benefit offers highly sought after time away from work for top performing employees at the management and higher levels. The benefits reported include happier employees who have increased feelings of company loyalty, job satisfaction, and overall better attitudes. The sponsoring companies stated that those who take part in such leave contribute at a higher level upon their return, bringing fresh ideas and a renewed commitment to the company’s success.

The impact of the changing weaving industry on the culture and socioeconomic development of maya women in Guatemala

Growing demand for handwoven Maya textiles from Guatemala parallels recent international fascination with Maya civilization. This thesis surveys the effects of increases in demands for artisan textiles in Guatemala, and explores the reactions of women involved in Aj Quen, a weavers' association. The hypothesis is that the well-being of Maya women depends on their participation in the association. This is tested by using indicators of the weavers' attitudes defined as their "well-being" regarding 1) health, 2) education levels, 3) child care practices, and 4) economic stability. Interviews were conducted with 127 Maya women. Data were documented, providing a crucial missing link in the current literature of "women in Guatemala." The results of this study yield baseline data demonstrating that health and child care practices are not directly related to women's participation in the association. Their education levels increased as a direct result of working with the association, as did economic stability, although less consistently.

A Case Study of the Ellison Model's Use of Mentoring as an Approach Toward Inclusive Community Building

The Ellison Executive Mentoring Inclusive Community Building (ICB) Model is a paradigm for initiating and implementing projects utilizing executives and professionals from a variety of fields and industries, university students, and pre-college students. The model emphasizes adherence to ethical values and promotes inclusiveness in community development. It is a hierarchical model in which actors in each succeeding level of operation serve as mentors to the next. Through a three-step process--content, process, and product--participants must be trained with this mentoring and apprenticeship paradigm in conflict resolution, and they receive sensitivitiy and diversity training, through an interactive and dramatic exposition. The content phase introduces participants to the model's philosophy, ethics, values and methods of operation. The process used to teach and reinforce its precepts is the mentoring and apprenticeship activities and projects in which the participants engage and whose end product demontrates their knowledge and understanding of the model's concepts. This study sought to ascertain from the participants' perspectives whether the model's mentoring approach is an effective means of fostering inclusiveness, based upon their own experiences in using it. The research utilized a qualitative approach and included data from field observations, individual and group interviews, and written accounts of participants' attitudes. Participants complete ICB projects utilizing the Ellison Model as a method of development and implementation. They generally perceive that the model is a viable tool for dealing with diversity issues whether at work, at school, or at home. The projects are also instructional in that whether participants are mentored or seve as apprentices, they gain useful skills and knowledge about their careers. Since the model is relatively new, there is ample room for research in a variety of areas including organizational studies to dertmine its effectiveness in combating problems related to various kinds of discrimination.

The analysis of the resort timesharing industry in order to determine the industry's familiarity with timesharing and the industry's conception of the present and future effects of timesharing

The purpose of the study is to examine the impactof the timesharing concept on the resort industry in order to determine the industry's familiarity with timesharing and the industry's conception of the present and future effects of timesharing. The study utilizes two methods of research, primarydata and secondary data, to examine the concept of timesharing. This section includes information on the different forms of timesharing, the legal aspects, the marketing, management, finance and future of timesharing in order to educate the public about the concept. The primary data takes the form of a survey thatquestions hotel/motel operators in the Fort Lauderdale Beach area to determine their attitudes towards the impact of timesharing on the resort industy.

The association between parental attitudes and alcohol consumption and adolescent alcohol consumption in Southern Ireland: a cross-sectional study

Background: Alcohol plays a complex role in society. A recent study showed that over half of Irish adults drink hazardously. Adolescents report increased levels of alcohol consumption. Previous research has inferred the influence of the parent on their adolescent. Thus, the aim of the current study was to investigate the association between adolescent alcohol consumption and their parent’s consumption pattern and attitude toward alcohol use in Southern Ireland. Methods: A cross-sectional survey was undertaken in November 2014. This involved distributing a survey to adolescents (n = 982) in their final two years of second level education and at least one of their parents from a local electorate area in Southern Ireland. This survey included: alcohol use, self- reported height and weight, smoking status, mental health and well-being along with attitudinal questions. Chi-square tests and multivariate logistic regression were utilised. Results: A 37 % response rate was achieved. Over one-third (34.2 %) of adolescents and 47 % of parents surveyed reported hazardous drinking. Over 90 % of parents disagreed with allowing their adolescent to get drunk and rejected the idea that getting drunk is part of having fun as an adolescent. The majority (79.5 %) of parents surveyed believed that their alcohol consumption pattern set a good example for their adolescent. Multivariate logistic regression highlights the association between adolescent hazardous alcohol consumption and hazardous drinking by the father. Furthermore either parent permitting their adolescent to drink alcohol on special occasions was associated with hazardous alcohol consumption in the adolescent. Conclusion: The findings of this research notes a liberal attitude to alcohol and increased levels of consumption by the parent are linked to hazardous adolescent drinking behaviour. Future action plans aimed at combatting adolescent hazardous alcohol consumption should also be aimed at tackling parents’ attitudes towards and consumption of alcohol.

An Examination of Customers’ Attitudes about Table Top Technology in Full-Service Restaurants

This paper examines the influence of customer-facing technology in full-service restaurants. As a new addition to the service experience, tabletop devices offer the customer more control over the dining experience, and also increase customer participation in the service process, which has the potential to upset the traditional exchange between service providers and customers in restaurants. To examine how customers react to the use of tabletop devices, this study examines 1,343 point-of-sales transactions from 20 units of a full-service casual dining restaurant chain and matches customer in-restaurant transactions to their reactions to tabletop devices used during their meals. Results show that over 70% of the customers who used tabletop devices reported positive affect toward the device, with approximately 79% of customers reporting that the device improved their experience, citing convenience, ease of use, and credit card security as some benefits of using the technology. Approximately 80% of the customers who used the device reported that they would return to the restaurant because of the positive affect. The results also indicate that likeability of the device and tip percentage were positively and significantly connected to customer reports of the devices having a positive effect on experience and on desire to return. In addition, when customers reported increased return intentions, likeability of the device was higher regardless of reports of the device improving restaurant experience, showing that the introduction of tabletop devices had a positive effect for most—but not all—customers.

Big Bath and Impairment of Goodwill : A study of the European telecommunications industry

Income decreasing strategies conducted by management could be harmful for various stakeholders. One example is big bath accounting, which could be accomplished in numer- ous ways. This study focus on big baths achieved by recognising impairments of goodwill. Purpose - The purpose of this study is to examine patterns of association between big bath accounting and impairment of goodwill within the telecommunication service industry in Europe. Further, this study aim at contributing to the discussion regarding utilisation of big baths through impairments of goodwill, and takes the perspective of an external stakehold- er. Delimitations - The study is restricted to European telecommunication entities comprised in STOXX Europe 600 Index. Method - This study was conducted using a hybrid of qualitative and quantitative research strategy with a deductive approach. The five indicators used to identify various big bath behaviours were inspired and derived from theory and previous research. Data from 2009 to 2015 was collected from the companies’ annual reports and websites, and analysed by the help of codification of each fulfilled indicator where 2009 merely served as a compara- tive year for 2010. By the use of a scoreboard the collected data was summarised on an ag- gregated yearly basis as the industry, not the specific companies, were analysed. Empirical findings - The results of this study suggests that big baths are executed among tele- communication companies within Europe. These are conducted simultaneously as impair- ments of goodwill are present, facilitated by earning management. A possible explanation is considered to be the room for interpretation inherent in IAS 36, enabling goodwill impair- ments to be recognised on managers’ command. Thereby an impairment could be “saved” for better or worse circumstances, or recognised when there exist an opportunity to max- imise (the manager's) wealth in the future. This study reveal the co-occurrence of goodwill impairments and big bath-indications, however a review of causal relationships are not en- abled by the limitations of the chosen method. 

Down scaling to regional assessment of greenhouse gas emissions to enable consistency in accounting for emissions reduction projects and national inventory accounts for northern beef production in Australia

This paper explores the effect of using regional data for livestock attributes on estimation of greenhouse gas (GHG) emissions for the northern beef industry in Australia, compared with using state/territory-wide values, as currently used in Australia’s national GHG inventory report. Regional GHG emissions associated with beef production are reported for 21 defined agricultural statistical regions within state/territory jurisdictions. A management scenario for reduced emissions that could qualify as an Emissions Reduction Fund (ERF) project was used to illustrate the effect of regional level model parameters on estimated abatement levels. Using regional parameters, instead of state level parameters, for liveweight (LW), LW gain and proportion of cows lactating and an expanded number of livestock classes, gives a 5.2% reduction in estimated emissions (range +12% to –34% across regions). Estimated GHG emissions intensity (emissions per kilogram of LW sold) varied across the regions by up to 2.5-fold, ranging from 10.5 kg CO2-e kg–1 LW sold for Darling Downs, Queensland, through to 25.8 kg CO2-e kg–1 LW sold for the Pindan and North Kimberley, Western Australia. This range was driven by differences in production efficiency, reproduction rate, growth rate and survival. This suggests that some regions in northern Australia are likely to have substantial opportunities for GHG abatement and higher livestock income. However, this must be coupled with the availability of management activities that can be implemented to improve production efficiency; wet season phosphorus (P) supplementation being one such practice. An ERF case study comparison showed that P supplementation of a typical-sized herd produced an estimated reduction of 622 t CO2-e year–1, or 7%, compared with a non-P supplemented herd. However, the different model parameters used by the National Inventory Report and ERF project means that there was an anomaly between the herd emissions for project cattle excised from the national accounts (13 479 t CO2-e year–1) and the baseline herd emissions estimated for the ERF project (8 896 t CO2-e year–1) before P supplementation was implemented. Regionalising livestock model parameters in both ERF projects and the national accounts offers the attraction of being able to more easily and accurately reflect emissions savings from this type of emissions reduction project in Australia’s national GHG accounts.

Management accounting and supply chains: actions, concerns, and networks

What does this thesis do? This thesis uses Actor-Network Theory (ANT) to examine how a UK retailer’s organization and strategy, and, in turn, its form of management accounting was shaped by its supply chain. The thesis does this by reporting on four related themes in the form of four inter-connected essays. The first essay undertakes a state-of-the-art review of the literature. It examines how accounting issues within supply chains permeate ‘matters of concern’. In accordance with this idea of ANT, the essay illustrates how issues emerged, controversies developed, and matters evolved through an actor-network of accounting researchers within the supply chain domain. This leads on to the second essay, which exemplifies the nature of the UK’s retailing industry within which the supply chain case organization emerged and developed. The purposes of the essay are twofold: to introduce the contextual ramifications of the case organization; and to illustrate the emergence of a new market logic, which led to the creation of a global supply chain and a new form of management accounting therein. The third essay reports on a qualitative case study. It analyses the dualistic relation between ostensive and performative aspects of supply chain strategy, reveals how accounting numbers act as an obligatory passage point within this dualism, and makes a contribution to the ANT debate around the issue of whether and how a dualism between ostensive and performative aspects exists. The final essay reports on another case analysis of institutionalizing a heterarchical form of management accounting: a distributed form of intelligence that penetrates through lateral accountable relations. The analysis reveals a new form of management accounting characterised by ambiguity; it emphasizes the possibilities of compromises and negotiations, and it thus contributes to knowledge by combining an aspect of ANT with heterarchical tendencies in the world of contemporary organizations. Finally, the thesis concludes that it is the supply chain that organises today’s neoliberal capitalism; and it is management accounting that unites both human and non-human actors within such supply chains, despite that form of management accounting being ambiguous. The thesis comprises the introduction, these four essays, and the conclusion.

Serviço social do INSS : expressões materiais da implementação de sua competência legal no período de junho de 2009 a junho de 2014

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Humanas, Departamento de Serviço Social, Programa de Pós-Graduação em Política Social, 2015.

Generalists versus specialists: toward a typology of batterers in prison

In this study we apply the versatile/specialist offender debate to the research of intimate partner violence. We propose the existence of two types of imprisoned male batterers: the generalist and the specialist batterer. The individual, family, and community characteristics of these types of batterers are further explored in 110 imprisoned males in the Penitentiary of Villabona (Spain). As for the individual characteristics, results indicate that the generalist batterer present higher levels of psychopathology (specially antisocial and borderline personality), sexist attitudes, and substance dependence. Specialist batterers presented higher levels of conflict in their family of origin. Finally, generalist batterers reported coming from more socially disordered communities and showed lower levels of participation and integration in these communities than the specialist batterer. These results suggest that the classical distinctions among batterers based on psychopathology and context of violence (whether general or family only) might be of little utility when applied to imprisoned male batterers.

Physical Design Methodologies for Low Power and Reliable 3D ICs

As the semiconductor industry struggles to maintain its momentum down the path following the Moore's Law, three dimensional integrated circuit (3D IC) technology has emerged as a promising solution to achieve higher integration density, better performance, and lower power consumption. However, despite its significant improvement in electrical performance, 3D IC presents several serious physical design challenges. In this dissertation, we investigate physical design methodologies for 3D ICs with primary focus on two areas: low power 3D clock tree design, and reliability degradation modeling and management. Clock trees are essential parts for digital system which dissipate a large amount of power due to high capacitive loads. The majority of existing 3D clock tree designs focus on minimizing the total wire length, which produces sub-optimal results for power optimization. In this dissertation, we formulate a 3D clock tree design flow which directly optimizes for clock power. Besides, we also investigate the design methodology for clock gating a 3D clock tree, which uses shutdown gates to selectively turn off unnecessary clock activities. Different from the common assumption in 2D ICs that shutdown gates are cheap thus can be applied at every clock node, shutdown gates in 3D ICs introduce additional control TSVs, which compete with clock TSVs for placement resources. We explore the design methodologies to produce the optimal allocation and placement for clock and control TSVs so that the clock power is minimized. We show that the proposed synthesis flow saves significant clock power while accounting for available TSV placement area. Vertical integration also brings new reliability challenges including TSV's electromigration (EM) and several other reliability loss mechanisms caused by TSV-induced stress. These reliability loss models involve complex inter-dependencies between electrical and thermal conditions, which have not been investigated in the past. In this dissertation we set up an electrical/thermal/reliability co-simulation framework to capture the transient of reliability loss in 3D ICs. We further derive and validate an analytical reliability objective function that can be integrated into the 3D placement design flow. The reliability aware placement scheme enables co-design and co-optimization of both the electrical and reliability property, thus improves both the circuit's performance and its lifetime. Our electrical/reliability co-design scheme avoids unnecessary design cycles or application of ad-hoc fixes that lead to sub-optimal performance. Vertical integration also enables stacking DRAM on top of CPU, providing high bandwidth and short latency. However, non-uniform voltage fluctuation and local thermal hotspot in CPU layers are coupled into DRAM layers, causing a non-uniform bit-cell leakage (thereby bit flip) distribution. We propose a performance-power-resilience simulation framework to capture DRAM soft error in 3D multi-core CPU systems. In addition, a dynamic resilience management (DRM) scheme is investigated, which adaptively tunes CPU's operating points to adjust DRAM's voltage noise and thermal condition during runtime. The DRM uses dynamic frequency scaling to achieve a resilience borrow-in strategy, which effectively enhances DRAM's resilience without sacrificing performance. The proposed physical design methodologies should act as important building blocks for 3D ICs and push 3D ICs toward mainstream acceptance in the near future.

Worldwide convergence of IFRS: Evidence from the global automotive industry

Worldwide convergence of International Financial Reporting Standards (IFRS), ongoing since 2002, is a requirement if international comparability between publicly listed companies is to be ensured. Convergence is examined from the point of view of regulators, accountants, and users of financial information. For this purpose, data on 534 companies from the global automotive industry is used. This paper concludes that worldwide convergence is mostly being effective. Its triumph, however, varies depending on the set of accounting standards being compared to IFRS. Options within IFRS, national tax regulation, cultural differences, different company strategies and country resistance are found to hinder convergence.

Industry Linkages and Audit Firms' Industry Portfolio Choice: Evidence from Product Language

Audit firms are organized along industry lines and industry specialization is a prominent feature of the audit market. Yet, we know little about how audit firms make their industry portfolio decisions, i.e., how audit firms decide which set of industries to specialize in. In this study, I examine how the linkages between industries in the product space affect audit firms’ industry portfolio choice. Using text-based product space measures to capture these industry linkages, I find that both Big 4 and small audit firms tend to specialize in industry-pairs that 1) are close to each other in the product space (i.e., have more similar product language) and 2) have a greater number of “between-industries” in the product space (i.e., have a greater number of industries with product language that is similar to both industries in the pair). Consistent with the basic tradeoff between specialization and coordination, these results suggest that specializing in industries that have more similar product language and more linkages to other industries in the product space allow audit firms greater flexibility to transfer industry-specific expertise across industries as well as greater mobility in the product space, hence enhancing its competitive advantage. Additional analysis using the collapse of Arthur Andersen as an exogenous supply shock in the audit market finds consistent results. Taken together, the findings suggest that industry linkages in the product space play an important role in shaping the audit market structure.