Novel ready-to-eat mango product using gellan gum as gelling agent: physico-chemical, microbial and sensory characteristics

Este trabalho foi efectuado com o apoio da Universidade de Lisboa, Instituto Superior de Agronomia com o Centro de Engenharia dos Biossistemas (CEER

Estigma e percepções dos médicos de Clínica Geral sobre a doença mental e o suicídio

RESUMO: INTRODUÇÃO: A OMS (2001) revela que cerca de 450 milhões de pessoas sofrem de perturbações mentais ou comportamentais em todo o mundo, mas apenas uma pequena minoria tem tratamento, ainda que elementar. Transformam-se em vítimas por causa da sua doença e convertem-se em alvos de estigma e discriminação. O suicídio é considerado como um grande problema de saúde pública em todo o mundo, é uma das principais causas de morte de jovens adultos e situa-se entre as três maiores causas de morte na população entre 15-34 anos (OMS, 2001). As perturbações mentais aumentam o risco de suicídio. A depressão, esquizofrenia, e a utilização de substâncias incrementam o risco de suicídio. Estudos (Sartorius, 2002; Magliano et al., 2012) mostram que os profissionais de saúde, tal como o público em geral, podem ter atitudes negativas e estigma em relação às pessoas com perturbações mentais, podendo agir em conformidade, uma vez feito e conhecido o diagnóstico psiquiátrico. Os clínicos gerais são os receptores das perturbações mentais e tentativas de suicídio nas principais portas de entrada no acesso a cuidados de saúde. As crenças, conhecimentos e contacto com a doença mental e o suicídio, podem influenciar a atenção clínica. OBJECTIVOS: Avaliar o estigma e as percepções dos médicos de clínica geral em relação às tentativas de suicídio, o suicídio e perturbações mentais bem como os possíveis factores associados a estes fenómenos. MATERIAIS E MÉTODOS: Estudo do tipo transversal, combinando métodos quantitativos e qualitativos. A amostra é constituída por 125 sujeitos, médicos de clínica geral. Utilizaram-se as versões adaptadas dos seguintes instrumentos: Questionário sobre Percepções e Estigma em Relação à Saúde Mental e ao Suicídio (Liz Macmin e SOQ, Domino, 2005) e a Escala de Atitudes sobre a Doença Mental (Amanha Hahn, 2002). Para o tratamento estatístico dos dados usou-se a estatística 1) descritiva e 2) Análise estatística das hipóteses formuladas (Qui Quadrado - 2) a correlação entre variáveis (Spearman: ρ, rho). Os dados conectados foram limpos de inconsistências com base no pacote informático e estatístico SPSS versão 20. Para a aferição da consistência interna foi usado o teste de Alfa de Cronbach. RESULTADOS: Uma boa parte da amostra (46.4%) refere que não teve formação formal ou informal em saúde mental e (69.35%) rejeitam a ideia de que “grupos profissionais como médicos, dentistas e psicólogos são mais susceptíveis a cometer o suicídio”. Já (28.0%) têm uma perspectiva pessimista quanto a possibilidade de recuperação total dos sujeitos com perturbação mental. Sessenta e oito(54.4%) associa sujeitos com perturbação mental, a comportamentos estranhos e imprevisíveis, 115 (92.0%) a um baixo QI e 35 (26.7%) a poderem ser violentas e e perigosas. Os dados mostram uma associação estatisticamente significativa (p0.001) entre as variáveis: tempo de serviço no SNS, recear estar perto de sujeitos com doença mental e achar que os sujeitos com doença mental são mais perigosos que outros. Em termos estatísticos, existe uma associação estatitisticamente significativa entre as duas variáveis(X2=9,522; p0.05): percepção de que “é vergonhoso ter uma doença mental” e os conhecimentos em relação à doença mental. Existe uma correlação positiva, fraca e estatisticamente significativa entre os conhecimentos dos clínicos gerais(beneficiar-se de formação em saúde mental) e a percepção sobre os factores de risco (0,187; P0,039). DISCUSSÃO E CONCLUSÕES: A falta de conhecimento sobre as causas e factores de risco para os comportamentos suicidários, opções de intervenção e tratamento, particularmente no âmbito da doença mental, podem limitar a procura de ajuda individual ou dos próximos. Percepções negativas como o facto de não merecerem prioridade nos serviços, mitos (frágeis e cobarde, sempre impulsivo, chamadas de atenção, problemas espirituais) podem constituir-se como um indicador de que os clínicos gerais podem sofrer do mesmo sistema de estigma e crenças, de que sofre o público em geral, podendo agir em conformidade (atitudes de afastamento ereceio). As atitudes são influenciadas por factores como a formação, cultura e sistema de crenças. Sujeitos com boa formação na área da saúde mental têm uma percepção positiva e optimista sobre os factores de risco e uma atitude positiva em relação aos sujeitos com doença mental e comportamentos suicidários.-------------ABSTRACT: INTRODUCTION: The WHO (2001) reveals that about 450 million people suffer from mental or behavioral disorders worldwide, but only a small minority have access to treatment, though elementary. They become victims because of their disease and they become the targets of stigma and discrimination. Suicide is seen as a major public health problem worldwide, is a leading cause of death for young adults and is included among the three major causes of death in the population aged 15-34 years (WHO, 2001). Mental disorders increase the risk of suicide. Depression, schizophrenia, and the substances misuse increase the risk of suicide. Studies (Sartorius, 2002; Magliano et al, 2012) show that health professionals, such as the general public, may have negative attitudes and stigma towards people with mental disorders, and can act accordingly after psychiatric diagnosis is known. General practitioners are the main entry points of mental disorders and suicide attempts in the health sistem. Beliefs, knowledge and contact with mental illness and suicide, may influence clinical care. OBJECTIVES: To assess stigma and perceptions of general practitioners in relation to suicide attempts, suicide and mental disorders as well as possible factors associated with these phenomena. MATERIAL AND METHODS: This was a descriptive cross-sectional study, combining quantitative and qualitative methods. The sample consisted of 125 subjects, general practitioners. We used adapted versions of the following instruments: Questionnaire of Perceptions and Stigma in Relation to Mental Health and Suicide (Liz Macmin and SOQ, Domino, 2005) and the Scale of Attitudes on Mental Illness (Tomorrow Hahn, 2002). For the statistical treatment of the data we used: 1) descriptive (Data distribution by absolute and relative frequencies for each of the variables under study (including mean and standard deviation measures of central tendency and deviation), 2) statistical analysis of hypotheses using (Chi Square - 2, a hypothesis test that is intended to find a value of dispersion for two nominal variables, evaluating the association between qualitative variables) and the correlation between variables (Spearman ρ, rho), a measure of non-parametric correlation, which evaluates an arbitrary monotonic function can be the description of the relationship between two variables, without making any assumptions about the frequency distribution of the variables). For statistical analysis of the correlations were eliminated subjects who did not respond to questions. The collected data were cleaned for inconsistencies based on computer and statistical package SPSS version 20. To measure the internal consistency was used the Cronbach's alpha test. RESULTS: A significant part of the sample 64 (46.4%) reported no formal or informal training in mental health and 86 (69.35%) reject the idea that "professional groups such as doctors, dentists and psychologists are more likely to commit suicide." On the other hand, 42 (28.0%) have a pessimistic view of the possibility of full recovery of individuals with mental disorder. Sixty-eight ( 54.4 % ) of them associates subjects with mental disorder to strange and unpredictable behavior, 115 ( 92.0 % ), to low IQ, 35 ( 26.7 % ) and even to violent and dangerous behavior, 78 ( 62.4 % ) The data show a statistically significant (p = 0.001) relationship between the following variables: length of service in the NHS, fear of being close to individuals with mental illness and considering individuals with mental illness more dangerous than others. In statistical terms, there is a dependency between the two variables (X2 = 9.522, p> 0.05): the perception that "it is shameful to have a mental illness" and knowledge regarding mental illness. There is a positive and statistically significant weak correlation between knowledge of general practitioners (benefit from mental health training) and the perception of the risk factors (0,187; P0,039). DISCUSSION AND CONCLUSIONS: The lack of knowledge about the causes and risk factors for suicidal behavior, intervention and treatment, particularly in the context of mental illness options, may decreaseseeking for help by individual and their relatives. Negative perceptions such as considering that they dont deserve priority in services, myths (weak and cowards, always impulsive, seeking for attentions, spirituals problems) may indicate that general practitioners, may suffer the same stigma and beliefs systems as the general public, and can act accordingly (withdrawal and fear attitudes). Attitudes are influenced by factors such as education, culture and belief system. Subjects with good training in mental health have a positive and optimistic perception of the risk factors and a positiveattitude towards individuals with mental illness and suicidal behaviour.

Potential M&A between TIM Brazil and Oi S.A: The irreversible force of Telecommunications convergence

The intrinsic forces of market aiming for telecom industry convergence has arrived to Brazil. This case presents real characters, a sequence of events and other public information that has been impacting two corporations studied in this case. TIM Brazil and Oi S.A, two top players in the Brazilian telecom industry mobile and fixed segment respectively. While a merge between the two of them looks perfect and simple in an operational perspective due to its vertical complementarity, bring to them opportunities to win over a bundle offer (multi service package) that will consolidate their market predominance. Macroeconomic and internal corporate contrasts between these companies’ environment might signal that an impulsive could have a high price to pay in the future.

Strengthening to seismic action of reinforced columns with rectangular cross-section

The first part of this research work regards the assessment of the mathematical modelling of reinforced concrete columns confined with carbon fibre (CFRP) sheets under axial loading. The purpose was to evaluate existing analytical models, contribute to possible improvements and choose the best model(s) to be part of a new model for the prediction of the behaviour of confined columns under bending and compression. For circular columns, a wide group of authors have proposed several models specific for FRP-confined concrete. The analysis of some of the existing models was carried out by comparing these with several tested columns. Although several models predict fairly the peak load only few can properly estimate the load-strain and dilation behaviour of the columns. Square columns confined with CFRP show a more complex interpretation of their behaviour. Accordingly, the analysis of two experimental programs was carried out to propose new modelling equations for the whole behaviour of columns. The modelling results show that the analytical curves are in general agreement with the presented experimental curves for a wide range of dimensions. An analysis similar to the one done for circular columns was this turn carried out for square columns. Few models can fairly estimate the whole behaviour of the columns and with less accuracy at all levels when compared with circular columns. The second part of this study includes seven experimental tests carried out on reinforced concrete rectangular columns with rounded corners, different damage condition and with confinement and longitudinal strengthening systems. It was concluded that the use of CFRP confinement is viable and of effective performance enhancement alone and combined with other techniques, maintaining a good ductile behaviour for established threshold displacements. As regards the use of external longitudinal strengthening combined with CFRP confinement, this system is effective for the performance enhancement and viable in terms of execution. The load capacity was increased significantly, preserving also in this case a good ductile behaviour for threshold displacements. As to the numerical nonlinear modelling of the tested columns, the results show a variation of the peak load of 1% to 10% compared with tests results. The good results are partly due to the inclusion of the concrete constitutive model by Mander et al. modified by Faustino, Chastre & Paula taking into account the confinement effect. Despite the reasonable approximation to tests results, the modelling results showed higher unloading, which leads to an overestimate dissipated energy and residualdisplacement.

Numerical simulation of blast effects on fibre grout RC panels

The main purpose of the present dissertation is the simulation of the response of fibre grout strengthened RC panels when subjected to blast effects using the Applied Element Method, in order to validate and verify its applicability. Therefore, four experimental models, three of which were strengthened with a cement-based grout, each reinforced by one type of steel reinforcement, were tested against blast effects. After the calibration of the experimental set-up, it was possible to obtain and compare the response to the blast effects of the model without strengthening (reference model), and a fibre grout strengthened RC panel (strengthened model). Afterwards, a numerical model of the reference model was created in the commercial software Extreme Loading for Structures, which is based on the Applied Element Method, and calibrated to the obtained experimental results, namely to the residual displacement obtained by the experimental monitoring system. With the calibration verified, it is possible to assume that the numerical model correctly predicts the response of fibre grout RC panels when subjected to blast effects. In order to verify this assumption, the strengthened model was modelled and subjected to the blast effects of the corresponding experimental set-up. The comparison between the residual and maximum displacements and the bottom surface’s cracking obtained in the experimental and the numerical tests yields a difference of 4 % for the maximum displacements of the reference model, and a difference of 4 and 10 % for the residual and maximum displacements of the strengthened model, respectively. Additionally, the cracking on the bottom surface of the models was similar in both methods. Therefore, one can conclude that the Applied ElementMethod can correctly predict and simulate the response of fibre grout strengthened RC panels when subjected to blast effects.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Biomimetic mineralization: encapsulation in calcium carbonate shells

Calcium carbonate biomineralization is a self-assembly process that has been studied to be applied in the biomedical field to encapsulate biomolecules. Advantages of engineering mineral capsules include improved drug loading efficiencies and protection against external environment. However, common production methods result in heterogeneous capsules and subject biomolecules to heat and vibration which cause irreversible damage. To overcome these issues, a microfluidic device was designed, manufactured and tested in terms of selectivity for water and oil to produce a W/O/W emulsion. During the development of this work there was one critical challenge: the selective functionalization in closed microfluidic channels. Wet chemical oxidation of PDMS with 1M NaOH, confirmed by FTIR, followed by adsorption of polyelectrolytes - PDADMAC/PSS - confirmed by UV-Vis and AFM results, render the surface of PDMS hydrophilic. UV-Vis spectroscopy also confirmed that this modification did not affect PDMS optical properties, making possible to monitor fluids and droplets. More important, with this approach PDMS remains hydrophilic over time. However, due to equipment constrains selectivity in microchannels was not achieved. Therefore, emulsion studies took place with conventional methods. Several systems were tried, with promising results achieved with CaCO3 in-situ precipitation, without the use of polymers or magnesium. This mineral stabilizes oil droplets in water, but not in air due to incomplete capsule formation.

Valorization of olive pomace through combination of biocatalysis with supercritical fluid technology

A supercritical carbon dioxide (scCO2) based oil extraction method was implemented on olive pomace (alperujo), and an oil yield of 25,5 +/- 0,8% (goil/gdry residue) was obtained. By Soxhlet extraction with hexane, an oil extraction yield of 28,9 +/- 0,8 % was obtained, which corresponds to an efficiency of 88,4 +/- 4,8 % for the supercritical method. The scCO2 extraction process was optimized for operating conditions of 50 MPa and 348,15 K, for which an oil loading of 32,60 g oil/kg CO2 was calculated. As a proof of concept, olive pomace was used as feedstock for biodiesel production, in a process combining the use of lipase as a catalyst with the use of scCO2 as a solvent, and integrating the steps of oil extraction, oil to biodiesel transesterification and subsequent separation of the latter. In the conducted experiments, FAME (fatty acid methyl ester) purities of 90% were obtained, with the following operating parameters: an oil:methanol molar ratio of 1:24; a residence time of 7,33 and 11,6 mins; a pressure of 40 MPa; a temperature of 313,15 K; and Lipozyme (Mucor miehei; Sigma-Aldritch) as an enzyme. However, oscillations of FAME purity were registered throughout the experiments, which could possibly be due to methanol accumulation in the enzymatic reactor. Finally, the phenolic content of olive pomace, and the effect of the drying process – oven or freeze-drying – and the extraction methods – hydro-alcoholic method and supercritical method – on the phenolic content were analysed. It was verified that the oven-drying process on the olive pomace preserved 90,1 +/- 3,6 % of the total phenolic content. About 62,3 +/- 5,53% of the oven-dried pomace phenolic content was extracted using scCO2 at 60 MPa and 323,15 K. Seven individual phenols – hydroxytyrosol, tyrosol, oleuropein, quercetin, caffeic acid, ferulic acid and p-coumaric acid – were identified and quantified by HPLC.

Novel antibiotic-loaded orthopaedic bone cements: insights on drug release profiles and biocompatibility

Acrylic bone cement (BC) is widely used as an anchor of artificial joints. Bacterial infection due to biofilm formation and inflammation are common and difficult to treat problems associated with commercial available BC formulations. Research on novel BC compositions is urgently needed. The main objective of this thesis was to develop a new biocompatible antibiotic-loaded BC with improved release profile. To achieve that aim several additives were incorporated, as an antibiotic (levofloxacin) to combat bacterial growth, an anti-inflammatory drug (diclofenac) to decrease the inflammatory process and two well-known and broadly used biopolymers, alginate and chitosan in order to increase matrix porosity, and in this way to intensify the amount of released drug. Novel BC formulations were tested in order to find the most suitable one that had potential to proceed to clinical application. Numerous tests were conducted as: a) evaluation of drug release profiles in different biomimetic media, b) mechanical and surface studies, c) microbiological activity testing against Staphylococcus aureus and d) in vitro biocompatibility assays (fibroblasts and osteoblasts). In general, the addition of biopolymers increased drug release, didn’t compromised BC mechanical properties and increased BC hydrophilicity. Microbiological testing revealed that Lev[BC]Chi was the only matrix that reduced significantly biofilm formation. On the contrary, alginate and diclofenac loading into BC seemed to increase biofilm growth. Biocompatibility studies showed some decrease in cell viability, in particularly on osteoblasts, mainly due to the high amounts of released drugs. In conclusion, the present work has shown that the matrix with more potential to proceed in further investigations was Lev[BC]Chi. Other conditions (namely additives and drugs concentrations) should be evaluated with the other tested BC matrices before being discharged.

Modelação dinâmica do embate de embarcações sobre pilares de pontes

Após o embate de uma embarcação contra o maciço do pilar da Ponte 25 de Abril em Lisboa e tendo em conta a importância desta estrutura, levantaram-se algumas preocupações referentes à segurança da ponte quanto a este tipo de solicitações. Como tal, no seguimento desta problemática, o principal objetivo do presente trabalho é avaliar a resposta da Ponte 25 de Abril sujeita ao embate de embarcações. Sabe-se que a Ponte 25 de Abril foi dimensionada tendo como base o sismo de El Centro de 1940, não tendo sido feito um estudo pormenorizado na temática do embate de uma embarcação uma vez que os momentos na base do maciço, resultantes do sismo estudado no projeto, eram largamente superiores aos mesmos momentos provocados por uma força no topo do maciço que pretendia simular o embate de uma embarcação. No entanto, as expressões que pretendem simular o efeito de um embate de uma embarcação em pilares de pontes evoluíram desde a data do projeto. Sendo os maciços dos pilares os elementos estruturais diretamente sujeitos ao evento do embate, transmitindo posteriormente os deslocamentos e forças aos respetivos pilares, o presente estudo focou-se nestes elementos. Para se estudar o comportamento do maciço de um pilar da ponte sujeito a estas ações dinâmicas, foram necessários dados para se definir a estrutura em causa e a respetiva solicitação, como também foi necessário um programa de cálculo não-linear de estruturas indicado para o presente caso. Obteve-se o projeto da Ponte 25 de Abril assim como dados relativos a todas as embarcações que cruzaram a Ponte no ano de 2014. A modelação da estrutura e respetivas solicitações foram feitas com recurso ao programa de cálculo não-linear de estruturas Extreme Loading for Structures, que utiliza o Método dos Elementos Aplicados. A partir do modelo do maciço do pilar da ponte traçaram-se as curvas de capacidade dinâmica e estática da estrutura e simularam-se tanto o sismo de El Centro de 1940 como o embate da embarcação mais condicionante que poderia ter ocorrido no ano de 2014. Com base nos resultados obtidos nos ensaios efetuados no presente trabalho verificou-se que, embora o embate de uma embarcação possa ser mais condicionante do que o sismo para o qual foi dimensionada, a estrutura do maciço resiste a ambas as solicitações não apresentando danos significativos.

Implementation of membrane processes for improvement of the detection of food contaminants

The EM3E Master is an Education Programme supported by the European Commission, the European Membrane Society (EMS), the European Membrane House (EMH), and a large international network of industrial companies, research centres and universities (http://www.em3e.eu)

Análise da vulnerabilidade sísmica do arco da Rua Augusta

Em Portugal grande parte dos edifícios históricos antigos são constituídos por alvenaria de pedra. Este género de construção é particularmente vulnerável a ações de natureza dinâmica, nomeadamente a ações sísmicas. O estudo da vulnerabilidade sísmica destes edifícios permite estimar os níveis de dano expectáveis, aquando da ocorrência de um sismo e apoiar o desenvolvimento de técnicas de reforço que permitam evitar o colapso dos mesmos. O objetivo principal do presente estudo é avaliar a vulnerabilidade sísmica do arco da rua Augusta em Lisboa, perante um evento sísmico regulamentar, utilizando um programa de cálculo comercial especializado que permite a utilização de análises dinâmicas não lineares. Numa primeira fase procedeu-se à identificação modal do arco, com recurso a ensaios de vibração ambiental. Os resultados destes ensaios de caracterização dinâmica foram utilizados para calibrar o modelo numérico, o qual foi desenvolvido no programa de cálculo Extreme Loading for Structures, baseado no Método dos Elementos Aplicados. O modelo numérico foi utilizado, numa segunda fase, para avaliar a vulnerabilidade sísmica do arco. Uma análise preliminar pushover permitiu obter a curva de capacidade da estrutura, que por sua vez, possibilita a definição os limites de um conjunto de estados de dano considerados relevantes para o arco. Subsequentes análises sísmicas não lineares e a definição de curvas de fragilidade, permitem estimar os níveis de dano prováveis para vários níveis de ação sísmica e concluir sobre a vulnerabilidade sísmica do Arco da Rua Augusta perante um cenário sísmico regulamentar.

The global shopper & brands communication at airports

This project aims to illuminate two perspectives on travel retail. On the one hand, it describes the main character of the shopping scenario at airports, namely the Global Shopper. It covers the entire profile of the referred character, the main nationalities that represent him and the current shopping trends of the passenger. Also estimates of the booming nationalities and the future purchasing trends are accurately presented. On the other hand, the travel retail market is analyzed from the airport brands’ perspective. It is described what is currently done in terms of brands communication in the top ten airports around the world and the expected future market retail trends. To accurately explore the Global Shopper behavior and purchasing preferences, a market research was conducted with a sample of 128 respondents, male and female, from different nationalities, age groups, occupation and education backgrounds. The essay tests hypothesis regarding the relevance of several variables in the purchasing process of the Global Shopper in order to understand the most pleasant way to approach consumers in travel retail. The main variables studied concern the reasons to shop at airports, to whom the passenger shops, the preferred category and brand of purchase, feelings while shopping abroad, impulsive buying behavior, brand loyalty, the use of mobile devices in the shopping process, brands communication at airports, pre-ordering online and the attitude towards self-service stores. Some findings were in accordance with expectations, while others were a surprise and may produce valuable recommendations for future travel retail practices. 4 The main relevant results concern two areas, namely pre-ordering online and self-service stores. Results showed a certain stress about not having enough time to choose between the various offerings in travel retail, as well as difficulty in dealing with crowed stores. However, pre-ordering online was not common, which would be an initiative that could solve the discomfort at airport’s stores. Moreover, self-service would promote efficiency in stores allowing passengers to save time if they already know how to go through the shopping process by themselves. Another possible recommendation concerns differentiating the strategy in travel retail for the two genders. Some differences were found in the categories bought by male and female, as well as to how brands should shape their approach concerning the demands of each gender.

Advancing tendon regeneration through the development of bio-stimulating tissue engineering approaches

Tendon tissue engineering (TE) requires tailoring scaffolds designs and properties to the anatomical and functional requirements of tendons located in different regions of the body. Cell sourcing is also of utmost importance as tendon cells are scarce. Recently, we have found that it is possible to direct the tenogenic differentiation of Amniotic fluid and Adipose tissue derived stem cells (hAFSCs and hASCs), and also that there are hASCs subpopulations that might be more prone to tenogenic differentiation. Nevertheless, biochemical stimulation may not be enough to develop functional TE substitutes for a tissue that is known to be highly dependent on mechanical loading.

Análisis mecánico de albañilería arqueológica de adobe bajo cargas de compresión uniaxial: El caso de Huaca de la Luna

This article presents an experimental and numerical study for the mechanical characterization under uniaxial compressive loading of the adobe masonry of one of the most emblematic archaeological complex in Peru, 'Huaca de la Luna' (100-650AD). Compression tests of prisms were carried out with original material brought to the laboratory. For measuring local deformations in the tests, displacement transducers were used which were complemented by a digital image correlation system which allowed a better understanding of the failure mechanism. The tests were then numerically simulated by modelling the masonry as a continuum media. Several approaches were considered concerning the geometrical modelling, namely 2D and 3D simplified models, and 3D refined models based on a photogrammetric reconstruction. The results showed a good approximation between the numerical prediction and the experimental response in all cases. However, the 3D models with irregular geometries seem to reproduce better the cracking pattern observed in the tests.