Intellectual property asset management:how to identify, protect, manage and exploit intellectual property within the business environment

In the new ‘knowledge-intensive economies’ Intellectual assets increasingly play a key part on balance sheets. There is an increasing global awareness that in order to promote innovation and the growth of the economy, businesses must fully recognise and exploit their intellectual assets. A company’s ability to innovate rapidly and successfully is now regarded as essential and most breakthroughs are made by Small and Medium-sized Enterprises (SMEs), usually with no in-house legal professionals to help them. It is essential that those working with or creating intellectual property rights (IPR) are aware of the basics of Intellectual Property Law. Intellectual Property Asset Management provides business and management students at all levels with an accessible-straight-forward explanation of what the main Intellectual Property rights are and how these rights are protected. Locating the subject squarely in a business context and using case studies and examples throughout drawn from a wide range of business organisations, it explains how an organisation can exploit their rights through licensing, franchising and other means in order to make the best possible use of their IP assets. This book will provide students with: • the basic Intellectual Property law knowledge needed to identify a potential IP issue • the tools and understanding to assess an IP breach • the ability to identify where the problem cannot be solved in house and where expert legal assistance is required • the knowledge required to work effectively with lawyers and other legal professionals to achieve the desired outcome

Using a systems approach in logistics design and planning

The international economic and business environment continues to develop at a rapid rate. Increasing interactions between economies, particularly between Europe and Asia, has raised many important issues regarding transport infrastructure, logistics and broader supply chain management. The potential exists to further stimulate trade provided that these issues are addressed in a logical and systematic manner. However, if this potential is to be realised in practice there is a need to re-evaluate current supply chain configurations. A mismatch currently exists between the technological capability and the supply chain or logistical reality. This mismatch has sharpened the focus on the need for robust approaches to supply chain re-engineering. Traditional approaches to business re-engineering have been based on manufacturing systems engineering and business process management. A recognition that all companies exist as part of bigger supply chains has fundamentally changed the focus of re-engineering. Inefficiencies anywhere in a supply chain result in the chain as a whole being unable to reach its true competitive potential. This reality, combined with the potentially radical impact on business and supply chain architectures of the technologies associated with electronic business, requires organisations to adopt innovative approaches to supply chain analysis and re-design. This paper introduces a systems approach to supply chain re-engineering which is aimed at addressing the challenges which the evolving business environment brings with it. The approach, which is based on work with a variety of both conventional and electronic supply chains, comprises underpinning principles, a methodology and guidelines on good working practice, as well as a suite of tools and techniques. The adoption of approaches such as that outlined in this paper helps to ensure that robust supply chains are designed and implemented in practice. This facilitates an integrated approach, with involvement of all key stakeholders throughout the design process.

The use of ICT by logistics service providers and implications for training needs:a cross-country perspective

Changes in the international economic scenario in recent years have made it necessary for both industrial and service firms to reformulate their strategies, with a strong focus on the resources required for successful implementation. In this scenario, information and communication technologies (ICT) has a potentially vital role to play both as a key resource for re-engineering business processes within a framework of direct connection between suppliers and customers, and as a source of cost optimisation. There have also been innovations in the logistics and freight transport industry in relation to ICT diffusion. The implementation of such systems by third party logistics providers (3PL) allows the real-time exchange of information between supply chain partners, thereby improving planning capability and customer service. Unlike other industries, the logistics and freight transport industry is lagging somewhat behind other sectors in ICT diffusion. This situation is to be attributed to a series of both industry-specific and other factors, such as: (a) traditional resistance to change on the part of transport and logistics service providers; (b) the small size of firms that places considerable constraints upon investment in ICT; (c) the relative shortage of user-friendly applications; (d) the diffusion of internal standards on the part of the main providers in the industry whose aim is to protect company information, preventing its dissemination among customers and suppliers; (e) the insufficient degree of professional skills for using such technologies on the part of staff in such firms. The latter point is of critical importance insofar as the adoption of ICT is making it increasingly necessary both to develop new technical skills to use different hardware and new software tools, and to be able to plan processes of communication so as to allow the optimal use of ICT. The aim of this paper is to assess the impact of ICT on transport and logistics industry and to highlight how the use of such new technologies is affecting providers' training needs. The first part will provide a conceptual framework of the impact of ICT on the transport and logistics industry. In the second part the state of ICT dissemination in the Italian and Irish third party logistics industry will be outlined. In the third part, the impact of ICT on the training needs of transport and logistics service providers - based on case studies in both countries - are discussed. The implications of the foregoing for the development of appropriate training policies are considered. For the covering abstract see ITRD E126595.

Support tools for paediatric inpatient prescribers:a review

Prescribing support for paediatrics is diverse and includes both standard texts and electronic tools. Evidence concerning who should be supported and by what method is limited. This review aims to collate the current information available on prescribing support in paediatrics. Many tools designed to support prescribers are technology based. For example, electronic prescribing and smart phone applications. There is a focus on prescriber education both at undergraduate and postgraduate level. In the UK, the majority of inpatient prescribing is done by junior medical staff. It is important to ensure they are competent on qualification and supported in this role. A UK national prescribing assessment is being trialled to test for competence on graduation and there are also tools available to test paediatric prescribing after qualification. No information is available on the tools and resources UK prescribers currently use to support their decision making. One US study reported a decrease in the availability of paediatric prescribing information in a popular reference text. There is limited evidence to show that decisionsupport tools improve patient outcomes, however, there is growing confirmation that electronic prescribing reduces medication errors. There have been reports of new error types, such as selection errors, occurring with the use of electronic prescribing. Another concern with computerised decision-support systems is deciding what alerts should be presented to the prescriber and when/how often in order to avoid alert fatigue. There is little published concerning paediatric alerts perhaps as a consequence of commercial systems often not including paediatric specific support.

Reliability modelling and verification of manufacturing processes based on process knowledge management

Reliability modelling and verification is indispensable in modern manufacturing, especially for product development risk reduction. Based on the discussion of the deficiencies of traditional reliability modelling methods for process reliability, a novel modelling method is presented herein that draws upon a knowledge network of process scenarios based on the analytic network process (ANP). An integration framework of manufacturing process reliability and product quality is presented together with a product development and reliability verification process. According to the roles of key characteristics (KCs) in manufacturing processes, KCs are organised into four clusters, that is, product KCs, material KCs, operation KCs and equipment KCs, which represent the process knowledge network of manufacturing processes. A mathematical model and algorithm is developed for calculating the reliability requirements of KCs with respect to different manufacturing process scenarios. A case study on valve-sleeve component manufacturing is provided as an application example of the new reliability modelling and verification procedure. This methodology is applied in the valve-sleeve component manufacturing processes to manage and deploy production resources.

Review of industrial temperature measurement technologies and research priorities for the thermal characterisation of the factories of the future

As the largest source of dimensional measurement uncertainty, addressing the challenges of thermal variation is vital to ensure product and equipment integrity in the factories of the future. While it is possible to closely control room temperature, this is often not practical or economical to realise in all cases where inspection is required. This article reviews recent progress and trends in seven key commercially available industrial temperature measurement sensor technologies primarily in the range of 0 °C–50 °C for invasive, semi-invasive and non-invasive measurement. These sensors will ultimately be used to measure and model thermal variation in the assembly, test and integration environment. The intended applications for these technologies are presented alongside some consideration of measurement uncertainty requirements with regard to the thermal expansion of common materials. Research priorities are identified and discussed for each of the technologies as well as temperature measurement at large. Future developments are briefly discussed to provide some insight into which direction the development and application of temperature measurement technologies are likely to head.

Theory of hybrid computational and physical measurement-based integration of thermal and dimensional measurement

In dimensional metrology, often the largest source of uncertainty of measurement is thermal variation. Dimensional measurements are currently scaled linearly, using ambient temperature measurements and coefficients of thermal expansion, to ideal metrology conditions at 20˚C. This scaling is particularly difficult to implement with confidence in large volumes as the temperature is unlikely to be uniform, resulting in thermal gradients. A number of well-established computational methods are used in the design phase of product development for the prediction of thermal and gravitational effects, which could be used to a greater extent in metrology. This paper outlines the theory of how physical measurements of dimension and temperature can be combined more comprehensively throughout the product lifecycle, from design through to the manufacturing phase. The Hybrid Metrology concept is also introduced: an approach to metrology, which promises to improve product and equipment integrity in future manufacturing environments. The Hybrid Metrology System combines various state of the art physical dimensional and temperature measurement techniques with established computational methods to better predict thermal and gravitational effects.

Manufacturing and assembly automation by integrated metrology systems for aircraft wing fabrication

Discrepancies of materials, tools, and factory environments, as well as human intervention, make variation an integral part of the manufacturing process of any component. In particular, the assembly of large volume, aerospace parts is an area where significant levels of form and dimensional variation are encountered. Corrective actions can usually be taken to reduce the defects, when the sources and levels of variation are known. For the unknown dimensional and form variations, a tolerancing strategy is typically put in place in order to minimize the effects of production inconsistencies related to geometric dimensions. This generates a challenging problem for the automation of the corresponding manufacturing and assembly processes. Metrology is becoming a major contributor to being able to predict, in real time, the automated assembly problems related to the dimensional variation of parts and assemblies. This is done by continuously measuring dimensions and coordinate points, focusing on the product's key characteristics. In this paper, a number of metrology focused activities for large-volume aerospace products, including their implementation and application in the automation of manufacturing and assembly processes, are reviewed. This is done by using a case study approach within the assembly of large-volume aircraft wing structures.

Importance and Benefits of OPEN SCIENCE for Ubiquitous Sharing, Dissemination and Impact

While openness is well applied to software development and exploitation (open sources), and successfully applied to new business models (open innovation), fundamental and applied research seems to lag behind. Even after decades of advocacy, in 2011 only 50% of the public-funded research was freely available and accessible (Archambault et al., 2013). The current research workflows, stemming from a pre-internet age, result in loss of opportunity not only for the researchers themselves (cf. extensive literature on topic at Open Access citation project, http://opcit.eprints.org/), but also slows down innovation and application of research results (Houghton & Swan, 2011). Recent studies continue to suggest that lack of awareness among researchers, rather than lack of e-infrastructure and methodology, is a key reason for this loss of opportunity (Graziotin 2014). The session will focus on why Open Science is ideally suited to achieving tenure-relevant researcher impact in a “Publish or Perish” reality. Open Science encapsulates tools and approaches for each step along the research cycle: from Open Notebook Science to Open Data, Open Access, all setting up researchers for capitalising on social media in order to promote and discuss, and establish unexpected collaborations. Incorporating these new approaches into a updated personal research workflow is of strategic beneficial for young researchers, and will prepare them for expected long term funder trends towards greater openness and demand for greater return on investment (ROI) for public funds.

Role of the educator in social software initiatives in Further and Higher Education:a conceptualisation and research agenda

Higher and further education institutions are increasingly using social software tools to support teaching and learning. A growing body of research investigates the diversity of tools and their range of contributions. However, little research has focused on investigating the role of the educator in the context of a social software initiative, even though the educator is critical for the introduction and successful use of social software in a course environment. Hence, we argue that research on social software should place greater emphasis on the educators, as their roles and activities (such as selecting the tools, developing the tasks and facilitating the student interactions on these tools) are instrumental to most aspects of a social software initiative. To this end, we have developed an agenda for future research on the role of the educator. Drawing on role theory, both as the basis for a systematic conceptualization of the educator role and as a guiding framework, we have developed a series of concrete research questions that address core issues associated with the educator roles in a social software context and provide recommendations for further investigations. By developing a research agenda we hope to stimulate research that creates a better understanding of the educator’s situation and develops guidelines to help educators carry out their social software initiatives. Considering the significant role an educator plays in the initiation and conduct of a social software initiative, our research agenda ultimately seeks to contribute to the adoption and efficient use of social software in the educational domain.

Financial crisis and the change in the practice of applying common charge costs

The global financial crisis has not left the members of the EU untouched. Financial results have significantly dropped, businesses were folded in great numbers, the rate of employment decreased, social tension got fortified, and so did the national deficits in the budget in the majority of the countries. The decisive members of the community reacted fairly quickly to the challenges of the global economic crisis, and among the steps taken there were simultaneously ones to boost the economy and others to lower the expenses of the expenditure. The author examines what role was given to the steps in taxation policy as indirect regulating tools, and that how the decisions brought touch upon the previously issued harmonization strategy.

A vállalatok árképzési gyakorlata a versenyképesség szolgálatában (The pricing practice of corporates and the competitiveness)

A marketing-szakirodalom szerint az ár az egyik legfontosabb marketingeszköz, és a vállalati versenyképesség értelmezésében is meghatározó szerepe van. A megfelelő árképzés kialakítása ugyanakkor összetett folyamat, amely önmagában is külön képességnek tekinthető, és kell befektetést igényel. A szerző az elemzés során így arra volt kíváncsi, hogy a vezető, azaz a versenyképes vállalatok árazási gyakorlata mutat-e eltéréseket, és, ha igen, melyek azok a területek, amelyek leginkább összefüggnek az eredményességükkel. A háromszáz hazai vállalatra kiterjedő kutatás során azt találta, hogy a vezető vállalatok valamelyest másképp tekintenek az ár szerepére és szignifikánsan magasabb árszínvonalon értékesítenek. Ez nagyobb mozgásteret enged számukra, a versenytársak árkihívásaira így könnyebben tudnak árakciókkal válaszolni. Árképzési céljaikban azonban kevésbé mutatkoznak különbségek, mert számukra is kihívást jelent a válság, és nekik is több szempontnak kell egyszerre megfelelniük. Az árak meghatározásánál azonban több tényezőt vesznek figyelembe és jobban támaszkodnak a vevőkről szerzett információkra. ______________ According to the marketing literature the price is one of the most important marketing tools and it plays a dominant role in the interpretation of corporate competitiveness, as well. The appropriate pricing, however, a complex process that can be regarded as a distinct capability and it requires sufficient investment itself. In this analysis the author enquired if the pricing practice of the leading, that is, the most competitive companies has a different profile, and if yes, which areas are associated with the success of them. Based on the survey of 300 domestic organisations he found that the leading companies consider the role of price in a slightly different way and they price their products or services significantly higherthan the others. This let them some space to manoeuvre and they can react with price promotions when the competitors challenge them with price activities. Regarding the pricing objectives the author couldn’t identify differences. The leading companies are also affected by the economic crisis and they have to match many expectations at the same time but they take more factors into consideration when they set their prices and more likely use customer information.

Stratégiai paradigmaváltás szervezeti verseny(képesség) és az Operations management központi szerepe (Central role of strategic paradigm change, corporate competitiveness and operations management)

Az elmúlt két évtized folyamán a menedzserek megtanultak a megújult szabályok szerint játszani. Tudatosították, hogy a vállalatuk eredményes navigálásához folyamatosan figyelniük és adaptálniuk kell a legújabb módszereket, elméleteket. Jelen tanulmányával a szerző ezt a folyamatot kívánja segíteni, valamint arra az alapvető kérdésre keresi a választ, hogy érdemes-e a rendkívül gyorsan változó világban hosszabb távú célok meghatározásával foglalkozni, és ha igen, akkor mire összpontosítsák a vállalatok erőfeszítéseiket. Milyen részletezettséggel, milyen módon határozzák meg az elképzeléseiket úgy, hogy közben megőrizzék a vállalat flexibilitását, a változások idején nélkülözhetetlen agilitást. A szerző arra vállalkozik, hogy feltárja a stratégiai paradigmaváltás fejlődését, a termelési stratégia, az operations management központi meghatározó szereppé válását, valamint áttekintse a termelési és szolgáltatási rendszervezetés (OM) elveinek, eszközeinek, módszereinek fejlődését, kölcsönhatását, összefüggéseit. _______ Change of paradigm has taken place in strategic planning. Fight for position turned into a fight of movement. Companies strive to achieve individual, not copyable organizational performance, as well as to realize their business strategies by means of value generating, proactive approach. Operative management now placed in the focus of production strategy is becoming the compass, the driving force of leadership. The management of production and service systems has grown into independent scientific disciplines. It yielded such principles, tools and methods which are present as world-renowned blueprints (scientific tools) in the field of maintaining and developing corporate performance. In the present study the author specifies and discusses the tools of operative management as criteria of value generation aiming at quality and cost efficiency. He analyses the backto- back character, interrelationship of quality, TQM (Total Quality Management), TPS (Toyota Production System) and JIT (Just in Time). He examines the effects thereof on corporate performance where significant and strong relationship can be demonstrated in case there is an ability to plan and develop new products. The current new OM (Operations Management) techniques increasingly rely upon the quality of human resources, the permanent improvement of procedures as well as focusing on tight cooperation with suppliers/customers. Supply chain management, core competence management, service management now represent a “new generation” of the OM methods, processes, serving at the same time as basis and starting point for expectable future techniques as well.

Academic performance of college students in financial management and related prerequisite courses: A comparison of senior high school and commercial high school graduates attending Tamsui Oxford University College in Taiwan

In Taiwan, the college freshmen are recruited graduates of both senior high school and senior vocational school. The Ministry of Education (MOE) of the Republic of China prescribes the standards of curriculum and equipment for schools at all levels and categories. There exists a considerably different curriculum arrangement for senior high schools and vocational high schools in Taiwan at the present time. The present study used a causal-comparative research design to identify the influences of different post-secondary educational background on specialized course performance of college business majors. ^ The students involved in this study were limited to the students of four business-related departments at Tamsui Oxford University College in Taiwan. Students were assigned to comparison groups based on their post-secondary educational background as senior high school graduates and commercial high school graduates. The analysis of this study included a comparison of students' performance on lower level courses and a comparison of students' performance in financial management. The analysis also considered the relationship between the students' performance in financial management and its related prerequisite courses. The Kolb Learning Style Inventory (LSI) survey was administered to categorize subjects' learning styles and to compare the learning styles between the two groups in this study. The applied statistical methods included t-test, correlation, multiple regression, and Chi-square. ^ The findings of this study indicated that there were significant differences between the commercial high school graduates and the senior high school graduates on academic performances in specialized courses but not in general courses. There were no significant differences in learning styles between the two groups. These findings lead to the conclusion that business majors' academic performance in specialized courses were influenced by their post-secondary educational background. ^

A framework for specification and analysis of software architectures

Software architecture is the abstract design of a software system. It plays a key role as a bridge between requirements and implementation, and is a blueprint for development. The architecture represents a set of early design decisions that are crucial to a system. Mistakes in those decisions are very costly if they remain undetected until the system is implemented and deployed. This is where formal specification and analysis fits in. Formal specification makes sure that an architecture design is represented in a rigorous and unambiguous way. Furthermore, a formally specified model allows the use of different analysis techniques for verifying the correctness of those crucial design decisions. ^ This dissertation presented a framework, called SAM, for formal specification and analysis of software architectures. In terms of specification, formalisms and mechanisms were identified and chosen to specify software architecture based on different analysis needs. Formalisms for specifying properties were also explored, especially in the case of non-functional properties. In terms of analysis, the dissertation explored both the verification of functional properties and the evaluation of non-functional properties of software architecture. For the verification of functional property, methodologies were presented on how to apply existing model checking techniques on a SAM model. For the evaluation of non-functional properties, the dissertation first showed how to incorporate stochastic information into a SAM model, and then explained how to translate the model to existing tools and conducts the analysis using those tools. ^ To alleviate the analysis work, we also provided a tool to automatically translate a SAM model for model checking. All the techniques and methods described in the dissertation were illustrated by examples or case studies, which also served a purpose of advocating the use of formal methods in practice. ^