Genotypic variation in seedling root architectural traits and implications for drought adaptation in wheat (Triticum aestivum L.)

Root system characteristics are of fundamental importance to soil exploration and below-ground resource acquisition. Root architectural traits determine the in situ space-filling properties of a root system or root architecture. The growth angle of root axes is a principal component of root system architecture that has been strongly associated with acquisition efficiency in many crop species. The aims of this study were to examine the extent of genotypic variability for the growth angle and number of seminal roots in 27 current Australian and 3 CIMMYT wheat (Triticum aestivum L.) genotypes, and to quantify using fractal analysis the root system architecture of a subset of wheat genotypes contrasting in drought tolerance and seminal root characteristics. The growth angle and number of seminal roots showed significant genotypic variation among the wheat genotypes with values ranging from 36 to 56 (degrees) and 3 to 5 (plant-1), respectively. Cluster analysis of wheat genotypes based on similarity in their seminal root characteristics resulted in four groups. The group composition reflected to some extent the genetic background and environmental adaptation of genotypes. Wheat cultivars grown widely in the Mediterranean environments of southern and western Australia generally had wider growth angle and lower number of seminal axes. In contrast, cultivars with superior performance on deep clay soils in the northern cropping region, such as SeriM82, Baxter, Babax, and Dharwar Dry exhibited a narrower angle of seminal axes. The wheat genotypes also showed significant variation in fractal dimension (D). The D values calculated for the individual segments of each root system suggested that, compared to the standard cultivar Hartog, the drought-tolerant genotypes adapted to the northern region tended to distribute relatively more roots in the soil volume directly underneath the plant. These findings suggest that wheat root system architecture is closely linked to the angle of seminal root axes at the seedling stage. The implications of genotypic variation in the seminal root characteristics and fractal dimension for specific adaptation to drought environment types are discussed with emphasis on the possible exploitation of root architectural traits in breeding for improved wheat cultivars for water-limited environments.

Work Stress and Early Atherosclerosis: Do Genetic Background and Pre-Employment Risk Factors Explain Conflicting Findings?

According to the models conceptualizing work stress, increased risk of health problems arise when high job demands co-occur with low job control (the demand-control model) or the efforts invested by the employee are disproportionately high compared to the rewards received (effort-reward imbalance model). This study examined the association between work stress and early atherosclerosis with particular attention to the role of pre-employment risk factors and genetic background in this association. The subjects were young healthy adults aged 24-39 who were participating in the 21-year follow-up of the ongoing prospective "Cardiovascular Risk in Young Finns" study in 2001-2002. Work stress was evaluated with questionnaires on demand-control model and on effort-reward model. Atherosclerosis was assessed with ultrasound of carotid artery intima-media thickness (IMT). In addition, risk for enhanced atherosclerotic process was assessed by measuring with heart rate variability and heart rate. Pre-employment risk factors, measured at age 12 to 18, included such as body mass index, blood lipids, family history of coronary heart disease, and parental socioeconomic position. Variants of the neuregulin-1 were determined using genomic DNA. The results showed that higher work stress was associated with higher IMT in men. This association was not attenuated by traditional risk factors of atherosclerosis and coronary heart disease or by pre-employment risk factors measured in adolescence. Neuregulin-1 gene moderated the association between work stress and IMT in men. A significant association between work stress and IMT was found only for the T/T genotype of the neuregulin-1 gene but not for other genotypes. Among women an association was found between higher work stress and lower heart rate variability, suggesting higher risk for developing atherosclerosis. These associations could not be explained by demographic characteristics or coronary risk factors. The present findings provide evidence for an association between work stress and atherosclerosis in relatively young population. This association seems to be modified by genetic influences but it does not appear to be confounded by pre-employment adolescent risk factors.

The role of root architectural traits in adaptation of wheat to water-limited environments

Better understanding of root system structure and function is critical to crop improvement in water-limited environments. The aims of this study were to examine root system characteristics of two wheat genotypes contrasting in tolerance to water limitation and to assess the functional implications on adaptation to water-limited environments of any differences found. The drought tolerant barley variety, Mackay, was also included to allow inter-species comparison. Single plants were grown in large, soil-filled root-observation chambers. Root growth was monitored by digital imaging and water extraction was measured. Root architecture differed markedly among the genotypes. The drought-tolerant wheat (cv. SeriM82) had a compact root system, while roots of barley cv. Mackay occupied the largest soil volume. Relative to the standard wheat variety (Hartog), SeriM82 had a more uniform rooting pattern and greater root length at depth. Despite the more compact root architecture of SeriM82, total water extracted did not differ between wheat genotypes. To quantify the value of these adaptive traits, a simulation analysis was conducted with the cropping system model APSIM, for a wide range of environments in southern Queensland, Australia. The analysis indicated a mean relative yield benefit of 14.5% in water-deficit seasons. Each additional millimetre of water extracted during grain filling generated an extra 55 kg ha-1 of grain yield. The functional implications of root traits on temporal patterns and total amount of water capture, and their importance in crop adaptation to specific water-limited environments, are discussed.

Field isolates of Tomato spotted wilt virus overcoming resistance in capsicum in Australia

In 2002 at Virginia, South Australia, capsicum cultivars having the Tsw resistance gene against Tomato spotted wilt virus (TSWV) developed symptoms typical of TSWV infection and several glasshouse-grown crops were almost 100% infected. Samples reacted with TSWV antibodies in ELISA. Virus isolates from infected plants induced severe systemic symptoms, rather than a hypersensitive reaction, when inoculated onto capsicum cultivars and Capsicum chinense genotypes ( PI 152225 and PI 159236) that carry the Tsw resistance gene. Isolates virulent towards the Tsw gene had molecular and biological properties very similar to standard TSWV isolates, including a hypersensitive reaction in Sw-5 (TSWV-resistant) tomato genotypes. Tsw-virulent isolates were found during surveys at Virginia in 2002 and 2004 in both TSWV-resistant and susceptible cultivars of capsicum and tomato.

Effect of the puroindoline locus and environment on Chinese fresh noodle texture

Grain produced from doubled-haploid (DH) wheat lines, developed from a hard- and a soft-grained wheat cultivar, were bulked according to Pinb (puroindoline b) genotypes for an assessment of Chinese fresh noodle texture by a trained taste panel. Each DH line was designated as 'soft' or 'hard' grained, based on a PCR amplification of the wildtype, soft allele, or the mutant, hard allele. Theoretically, the soft and hard grain bulks represented respective Pinb alleles and an independent assortment of unlinked alleles from the parents, Sunco and Chuanyu 12. Grains from the parents and DH lines were grown at 2 locations in Queensland, Australia, and one in Sichuan, China. The grains were milled and processed for a taste panel evaluation in Chengdu, Sichuan. Results suggest the Pinb alleles had a significant effect on noodle softness and explained 30% of the variation; the 'soft' Pinb allele conferred a softer noodle texture. Location had a significant effect on noodle smoothness; wheat grain grown at Biloela, Queensland, produced a smoother noodle texture than grain grown in Sichuan. The effect of location confirms the importance of environment as a variable for this quality character. This investigation exemplifies the utility of Pinb markers for specifically altering Chinese Fresh Noodle texture.

On the environmental genetics of depressive symptoms : Focus on two serotonergic genes

Depression is a complex psychiatric disorder influenced by several genes, environmental factors, and their interplay. Serotonin receptor 2A (HTR2A) and tryptophan hydroxylase 1 (TPH1) genes have been implicated in vulnerability to depression and other psychiatric disorders, but the results have been inconsistent. The present study examined whether these two genes moderated the influence of different depressogenic environmental factors on subthreshold depressive symptoms (assessed on a modified version of Beck s Depression Inventory, BDI) and depression-related temperament, i.e., harm avoidance (assessed on the Temperament and Character Inventory, TCI). The environmental factors included measures of childhood and adolescence exposure, i.e., maternal nurturance and parental socioeconomic status, and adulthood social circumstances, i.e., perceived social support and urban/rural residence. The participants were two randomly selected subsamples (n = 1246, n = 341) from the longitudinal population-based Cardiovascular Risk in Young Finns study (n = 3596). Childhood environmental factors were assessed when the participants were 3 to 18 years of age, and three years after the baseline. Adulthood environmental factors and outcome measures were assessed 17 and 21 years later when the participants were 21 to 39 years of age. The T102C polymorphism of the HTR2A gene moderated the association between childhood maternal nurturance and adulthood depressive symptoms, such that exposure to high maternal nurturance predicted low depressive symptoms among individuals carrying the T/T or T/C genotypes, but not among those carrying the C/C genotype. Likewise, high parental SES predicted low adulthood harm avoidance in individuals carrying the T/T or T/C genotype, but not in C/C-genotype carriers. Individuals carrying the T/T or T/C genotype were also sensitive to urban/rural residence, such that they had lower depressive symptoms in urban than in rural areas, whereas those carrying the C/C genotype were not sensitive to urban/rural residence difference. HTR2A did not moderate the influence of social support. TheA779C/A218C haplotype of the TPH1 gene was not involved in the association between childhood environment and adulthood outcomes. However, individuals carrying A alleles of the TPH1 haplotype were more vulnerable to the lack of adulthood social support in terms of high depressive symptoms than their counterparts carrying no A alleles. Furthermore, individuals living in remote rural areas and carrying the A/A haplotype had higher depressive symptoms than those carrying other genotypes of the TPH1. The findings suggest that the HTR2A and TPH1 genes may be involved in the development of depression by influencing individual s sensitivity to depressogenic environmental influences.

The accuracy of varietal selection using factor analytic models for multi-environment plant breeding trials

Modeling of cultivar x trial effects for multienvironment trials (METs) within a mixed model framework is now common practice in many plant breeding programs. The factor analytic (FA) model is a parsimonious form used to approximate the fully unstructured form of the genetic variance-covariance matrix in the model for MET data. In this study, we demonstrate that the FA model is generally the model of best fit across a range of data sets taken from early generation trials in a breeding program. In addition, we demonstrate the superiority of the FA model in achieving the most common aim of METs, namely the selection of superior genotypes. Selection is achieved using best linear unbiased predictions (BLUPs) of cultivar effects at each environment, considered either individually or as a weighted average across environments. In practice, empirical BLUPs (E-BLUPs) of cultivar effects must be used instead of BLUPs since variance parameters in the model must be estimated rather than assumed known. While the optimal properties of minimum mean squared error of prediction (MSEP) and maximum correlation between true and predicted effects possessed by BLUPs do not hold for E-BLUPs, a simulation study shows that E-BLUPs perform well in terms of MSEP.

SSR analysis of cultivated groundnut (Arachis hypogaea L.) germplasm resistant to rust and late leaf spot diseases

Cultivated groundnut (Arachis hypogaea L.) is an agronomically and economically important oilseed crop grown extensively throughout the semi-arid tropics of Asia, Africa and Latin America. Rust (Puccinia arachidis) and late leaf spot (LLS, Phaseoisariopsis personata) are among the major diseases causing significant yield loss in groundnut. The development of varieties with high levels of resistance has been constrained by adaptation of disease isolates to resistance sources and incomplete resistance in resistant sources. Despite the wide range of morphological diversity observed in the cultivated groundnut gene pool, molecular marker analyses have thus far been unable to detect a parallel level of genetic diversity. However, the recent development of simple sequence repeat (SSR) markers presents new opportunities for molecular diversity analysis of cultivate groundnut. The current study was conducted to identify diverse disease resistant germplasm for the development of mapping populations and for their introduction into breeding programs. Twenty-three SSRs were screened across 22 groundnut genotypes with differing levels of resistance to rust and LLS. Overall, 135 alleles across 23 loci were observed in the 22 genotypes screened. Twelve of the 23 SSRs (52%) showed a high level of polymorphism, with PIC values ≥0.5. This is the first report detecting such high levels of genetic polymorphism in cultivated groundnut. Multi-dimensional scaling and cluster analyses revealed three well-separated groups of genotypes. Locus by locus AMOVA and Kruskal-Wallis one-way ANOVA identified candidate SSR loci that may be valuable for mapping rust and LLS resistance. The molecular diversity analysis presented here provides valuable information for groundnut breeders designing strategies for incorporating and pyramiding rust and late leaf spot resistances and for molecular biologists wishing to create recombinant inbred line populations to map these traits.

Molecular characterisation, pathogenesis and fungicide sensitivity of Pythium spp. from table beet (Beta vulgaris var. vulgaris) grown in the Lockyer Valley, Queensland

Table beet production in the Lockyer Valley of south-eastern Queensland is known to be adversely affected by soilborne root disease from infection by Pythium spp. However, little is known regarding the species or genotypes that are the causal agents of both pre- and post-emergence damping off. Based on RFLP analysis with HhaI, HinfI and MboI of the PCR amplified ITS region DNA from soil and diseased plant samples, the majority of 130 Pythium isolates could be grouped into three genotypes, designated LVP A, LVP B and LVP C. These groups comprised 43, 41 and 7% of all isolates, respectively. Deoxyribonucleic acid sequence analysis of the ITS region indicated that LVP A was a strain of Pythium aphanidermatum, with greater than 99% similarity to the corresponding P. aphanidermatum sequences from the publicly accessible databases. The DNA sequences from LVP B and LVP C were most closely related to P. ultimum and P. dissotocum, respectively. Lower frequencies of other distinct isolates with unique RFLP patterns were also obtained with high levels of similarity (>97%) to P. heterothallicum, P. periplocum and genotypes of P. ultimum other than LVP B. Inoculation trials of 1- and 4-week-old beet seedlings indicated that compared with isolates of the LVP B genotype, a higher frequency of LVP A isolates caused disease. Isolates with the LVP A, LVP B and LVP C genotypes were highly sensitive to the fungicide Ridomil MZ, which suppressed radial growth on V8 agar between approximately four and thirty fold at 5 μg/mL metalaxyl and 40 μg/mL mancozeb, a concentration far lower than the recommended field application rate.

In vitro propagation of Corymbia torelliana x C. citriodora (Myrtaceae) via cytokinin-free node culture

Hybrids between Corymbia torelliana (F.Muell.) K.D.Hill & L.A.S.Johnson and C. citriodora subsp. variegata (F.Muell.) A.R.Bean & M.W.McDonald are used extensively to establish forestry plantations in subtropical Australia. Methods were developed for in vitro seed germination, shoot multiplication and plantlet formation that could be used to establish in vitro and ex vitro clone banks of juvenile Corymbia hybrids. Effects of sodium hypochlorite concentration and exposure time on seed contamination and germination, and effects of cytokinin and auxin concentrations on shoot multiplication and subsequent rooting, were assessed. A two-step surface sterilisation procedure, involving 70% ethanol followed by 1% sodium hypochlorite, provided almost no contamination and at least 88% germination. A novel method of cytokinin-free node culture proved most effective for in vitro propagation. Lateral bud break of primary shoots was difficult to induce by using cytokinin, but primary shoots rooted prolifically, elongated rapidly and produced multiple nodes in the absence of exogenous cytokinin. Further multiplication was obtained either by elongating lateral shoots of nodal explants in cytokinin-free medium or by inducing organogenic callus and axillary shoot proliferation with 2.2 µm benzyladenine. Plantlets were produced using an in vitro soil-less method that provided extensive rooting in sterile propagation mixture. These methods provide a means for simultaneous laboratory storage and field-testing of clones before selection and multiplication of desired genotypes.

Pre-anthesis ovary development determines genotypic differences in potential kernel weight in sorghum

Kernel weight is an important factor determining grain yield and nutritional quality in sorghum, yet the developmental processes underlying the genotypic differences in potential kernel weight remain unclear. The aim of this study was to determine the stage in development at which genetic effects on potential kernel weight were realized, and to investigate the developmental mechanisms by which potential kernel weight is controlled in sorghum. Kernel development was studied in two field experiments with five genotypes known to differ in kernel weight at maturity. Pre-fertilization floret and ovary development was examined and post-fertilization kernel-filling characteristics were analysed. Large kernels had a higher rate of kernel filling and contained more endosperm cells and starch granules than normal-sized kernels. Genotypic differences in kernel development appeared before stamen primordia initiation in the developing florets, with sessile spikelets of large-seeded genotypes having larger floret apical meristems than normal-seeded genotypes. At anthesis, the ovaries for large-sized kernels were larger in volume, with more cells per layer and more vascular bundles in the ovary wall. Across experiments and genotypes, there was a significant positive correlation between kernel dry weight at maturity and ovary volume at anthesis. Genotypic effects on meristem size, ovary volume, and kernel weight were all consistent with additive genetic control, suggesting that they were causally related. The pre-fertilization genetic control of kernel weight probably operated through the developing pericarp, which is derived from the ovary wall and potentially constrains kernel expansion.

Rapid Global Expansion of the Fungal Disease Chytridiomycosis into Declining and Healthy Amphibian Populations.

The fungal disease chytridiomycosis, caused by Batrachochytrium dendrobatidis, is enigmatic because it occurs globally in both declining and apparently healthy (non-declining) amphibian populations. This distribution has fueled debate concerning whether, in sites where it has recently been found, the pathogen was introduced or is endemic. In this study, we addressed the molecular population genetics of a global collection of fungal strains from both declining and healthy amphibian populations using DNA sequence variation from 17 nuclear loci and a large fragment from the mitochondrial genome. We found a low rate of DNA polymorphism, with only two sequence alleles detected at each locus, but a high diversity of diploid genotypes. Half of the loci displayed an excess of heterozygous genotypes, consistent with a primarily clonal mode of reproduction. Despite the absence of obvious sex, genotypic diversity was high (44 unique genotypes out of 59 strains). We provide evidence that the observed genotypic variation can be generated by loss of heterozygosity through mitotic recombination. One strain isolated from a bullfrog possessed as much allelic diversity as the entire global sample, suggesting the current epidemic can be traced back to the outbreak of a single clonal lineage. These data are consistent with the current chytridiomycosis epidemic resulting from a novel pathogen undergoing a rapid and recent range expansion. The widespread occurrence of the same lineage in both healthy and declining populations suggests that the outcome of the disease is contingent on environmental factors and host resistance.

Estimation in a multiplicative mixed model involving a genetic relationship matrix.

Genetic models partitioning additive and non-additive genetic effects for populations tested in replicated multi-environment trials (METs) in a plant breeding program have recently been presented in the literature. For these data, the variance model involves the direct product of a large numerator relationship matrix A, and a complex structure for the genotype by environment interaction effects, generally of a factor analytic (FA) form. With MET data, we expect a high correlation in genotype rankings between environments, leading to non-positive definite covariance matrices. Estimation methods for reduced rank models have been derived for the FA formulation with independent genotypes, and we employ these estimation methods for the more complex case involving the numerator relationship matrix. We examine the performance of differing genetic models for MET data with an embedded pedigree structure, and consider the magnitude of the non-additive variance. The capacity of existing software packages to fit these complex models is largely due to the use of the sparse matrix methodology and the average information algorithm. Here, we present an extension to the standard formulation necessary for estimation with a factor analytic structure across multiple environments.

Hardness Methods for Testing Maize Kernels

Maize is a highly important crop to many countries around the world, through the sale of the maize crop to domestic processors and subsequent production of maize products and also provides a staple food to subsistance farms in undeveloped countries. In many countries, there have been long-term research efforts to develop a suitable hardness method that could assist the maize industry in improving efficiency in processing as well as possibly providing a quality specification for maize growers, which could attract a premium. This paper focuses specifically on hardness and reviews a number of methodologies as well as important biochemical aspects of maize that contribute to maize hardness used internationally. Numerous foods are produced from maize, and hardness has been described as having an impact on food quality. However, the basis of hardness and measurement of hardness are very general and would apply to any use of maize from any country. From the published literature, it would appear that one of the simpler methods used to measure hardness is a grinding step followed by a sieving step, using multiple sieve sizes. This would allow the range in hardness within a sample as well as average particle size and/or coarse/fine ratio to be calculated. Any of these parameters could easily be used as reference values for the development of near-infrared (NIR) spectroscopy calibrations. The development of precise NIR calibrations will provide an excellent tool for breeders, handlers, and processors to deliver specific cultivars in the case of growers and bulk loads in the case of handlers, thereby ensuring the most efficient use of maize by domestic and international processors. This paper also considers previous research describing the biochemical aspects of maize that have been related to maize hardness. Both starch and protein affect hardness, with most research focusing on the storage proteins (zeins). Both the content and composition of the zein fractions affect hardness. Genotypes and growing environment influence the final protein and starch content and. to a lesser extent, composition. However, hardness is a highly heritable trait and, hence, when a desirable level of hardness is finally agreed upon, the breeders will quickly be able to produce material with the hardness levels required by the industry.

Vermiculite improves early development and survival of low chill stone-fruit embryos rescued in vitro

There are many reports of efficient embryo germination and the method has been optimized to suit subtropical low chill genotypes. However the subsequent growth, vigor, and ability of germinated embryos to develop and survive acclimatization is rarely reported. Many germinated embryos do not survive acclimatization, develop slowly, or fail to develop normally. Methods to improve plant development from in vitro embryo cultures are needed to improve the number of plants that survive to be useful in breeding programs. This paper describes an improved method of embryo rescue that significantly increases embryo shoot and root development that leads to increased plant survival. Four treatments: Woody Plant Media (WPM) solidified with agar, vermiculite with liquid WPM, vermiculite with WPM plus agar, and conventional stratification, were evaluated for embryo growth and subsequent plantlet development and survival for two low-chill peach and one low-chill nectarine cultivar. Highly significant improvements were found for shoot and root development of seedlings germinated in vermiculite based media compared to embryos germinated in conventional agar-based media. Vermiculite with WPM and agar improved plantlet growth subsequent to in vitro culture and significantly increased survival of germinated embryos resulting in more plants reaching the field.