New developments for lignocellulosics-nanocomposites with low carbon footprint

Cellulose nanofibrils have been evaluated as reinforcement material in polymeric matrixes due to their potential to improve the mechanical, optical, and dielectric properties of these matrixes as well as its environmental positive footprint. This work describes how banana nanocellulose can be used to replace others not so friendly materials in many applications including, biomaterials, automotive industries and packaging by proved with their mechanical properties. The process used is very mild to the environment and consists of a high pressure fibrillation followed by a chemical purification which affects the fiber morphology. Many fibers characterization processes were used including microscopy techniques and X-ray diffraction to study the structure and properties of the prepared nanofibers and composites. Microscopy studies showed that the used individualization processes lead to a unique morphology of interconnected web-like structure of the fibers. © 2012 Materials Research Society.

Biocompatible microemulsion modifies the pharmacokinetic profile and cardiotoxicity of doxorubicin

Doxorubicin (DOX) is an anthracycline antibiotic with a broad antitumor spectrum. However, the clinical use of DOX is limited because of its cardiotoxicity, a dose-dependent effect. Colloidal drug delivery systems, such as microemulsions (MEs), allow the incorporation of drugs, modifying the pharmacokinetic (PK) profile and toxic effects. In this study, we evaluated the PK profile and cardiotoxicity of a new DOX ME (DOX-ME). The PK profile of DOX-ME was determined and compared with that of the conventional DOX after single-dose administration (6mg/kg, intravenous) in male Wistar rats (n = 12 per group). The cardiotoxicity of DOX formulations was evaluated by serum creatine kinase MB (CKMB) activity in both animal groups before and after drug administration. The plasma DOX measurements were performed by high-performance liquid chromatography with fluorescence detection, and the CKMB levels were assayed using the CKMB Labtest® kit. The ME system showed a significant increase in plasma DOX concentrations and lower distribution volume when compared with conventional DOX. Serum CKMB activity increased after conventional DOX administration but was unchanged in the DOX-ME group. These results demonstrate modifications in drug access to susceptible sites using DOX-ME. DOX-ME displayed features that make it a promising system for future therapeutic application. © 2012 Wiley Periodicals, Inc.

Effect of different methods of cutting fluid application on turning of a difficult-to-machine steel (SAE EV-8)

In this study, different methods of cutting fluid application are used in turning of a difficult-to-machine steel (SAE EV-8). Initially, a semisynthetic cutting fluid was applied using a conventional method (i.e. overhead flood cooling), minimum quantity of cutting fluid, and pulverization. A lubricant of vegetable oil (minimum quantity of lubricant) was also applied using the minimum quantity method. Thereafter, a cutting fluid jet under high pressure (3.0 MPa) was singly applied in the following regions: chip-tool interface, top surface of the chip (between workpiece and chip) and tool-workpiece contact. Moreover, two other methods were used: an interflow between conventional application and chip-tool interface jet (combined method) and, finally, three jets simultaneously applied. In order to carry out these tests, it was necessary to set up a high-pressure system using a piston pump for generating a cutting fluid jet, a venturi for fluid application (minimum quantity of cutting fluid and minimum quantity of lubricant) and a nozzle for cutting fluid pulverization. The output variables analyzed included tool life, surface roughness, cutting tool temperature, cutting force, chip form, chip compression rate and machined specimen microstructure. Among the results, it can be observed that the tool life increases and the cutting force decreases with the application of cutting fluid jet, mainly when it is directed to the chip-tool interface. Excluding the methods involving jet fluid, the conventional method seems to be more efficient than other methods of low pressure, such as minimum quantity of volume and pulverization, when considering just the cutting tool wear. © 2013 IMechE.

Metabolic syndrome risk factors in overweight, obese, and extremely obese brazilian adolescents

Background: Obesity in infancy and adolescence has acquired epidemic dimensions worldwide and is considered a risk factor for a number of disorders that can manifest at an early age, such as Metabolic Syndrome (MS). In this study, we evaluated overweight, obese, and extremely obese adolescents for the presence of MS, and studied the prevalence of single factors of the syndrome in this population. Methods. A total of 321 adolescents (174 females and 147 males) aged 10 to 16 years, attending the Adolescent Outpatient Clinic of Botucatu School of Medicine, Brazil, between April 2009 and April 2011 were enrolled in this study. Adolescents underwent anthropometric evaluation (weight, height, and abdominal circumference) and Body Mass Index (BMI) was estimated according to age and gender, following Disease Control and Prevention Centers recommendations (CDC, 2000). Blood pressure was measured and individuals with BMI ≥ 85§ssup§th§esup§ percentile were submitted to laboratory evaluation for Total Cholesterol, HDL and LDL Cholesterol, Triglycerides, Fasting Insulinemia, and Fasting Glycemia to identify MS factors, according to the criteria suggested by the International Diabetes Federation. Insulin resistance was calculated by HOMA-IR, Quicki, and Fasting Glycemia/Fasting Insulinemia (FGI). Results and discussion. Of the 321 adolescents, 95 (29.6%) were overweight, 129 (40.2%) were obese, and 97 (30.2%) were extremely obese. Around 18% were diagnosed with MS. The most prevalent risk factors were abdominal circumference ≥90§ssup§th§esup§ percentile (55%), HDL < 40 mg/dL (35.5%), High Pressure ≥130/85 mm/Hg (21%), Triglycerides ≥150 mg/dL (18.5%), and Fasting Glycemia ≥100 mg/dL (2%). Insulin resistance was observed in 65% of the adolescents. Conclusion: An increased prevalence of overweight and obesity, together with cardiometabolic risk factors such as dyslipidemia and abnormal blood pressure, were observed in adolescents, contributing to the onset of metabolic syndrome at younger ages. Risk factors for MS were more prevalent in females. © 2013 Rizzo et al.; licensee BioMed Central Ltd.

Different methods of cutting fluid application on turning of a difficult-to-machine steel

Different methods of cutting fluid application are used on turning of a difficult-tomachine steel (SAE EV-8). A semi-synthetic cutting fluid was applied using a conventional method, minimum quantity of cutting fluid (MQCF), and pulverization. By the minimum quantity method was also applied a lubricant of vegetable oil (MQL). Thereafter, a cutting fluid jet under high pressure (3.0 MPa) was singly applied in the following regions: chip-tool interface; top surface of the chip; and tool-workpiece contact. Two other methods were used: an interflow between conventional application and chip-tool interface jet and, finally, three jets simultaneously applied. In order to carry out these tests, it was necessary to set up a high pressure system using a piston pump for generating a cutting fluid jet, a Venturi for fluid application (MQCF and MQL), and a nozzle for cutting fluid pulverization. The output variables analyzed included tool life, surface roughness, cutting tool temperature, cutting force, chip form, chip compression rate and machined specimen microstructure. It can be observed that the tool life increases and the cutting force decreases with the application of cutting fluid jet, mainly when it is directed to the chip-tool interface. Excluding the methods involving jet fluid, the conventional method seems to be more efficient than other methods of low pressure. © (2013) Trans Tech Publications, Switzerland.

Avaliação termodinâmica, termoeconômica e econômica da integração de sistemas de gaseificação da biomassa em uma usina sucroalcooleira

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da viabilidade do aproveitamento da palha da cana de açúcar para cogeração de energia numa usina sucroalcooleira

Pós-graduação em Engenharia Mecânica - FEIS

Análise termodinâmica, termoeconômica e econômica de uma usina sucroalcooleira com processo de extração por difusão

Pós-graduação em Engenharia Mecânica - FEIS

Efeitos de tratamentos hidrotérmicos nas propriedades viscográficas e amidos resistentes em féculas de mandioca

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação técnico-econômica do processo de cogeração em uma indústria sucroalcooleira

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Estudo da predição da circularidade e rugosidade de peças retificadas utilizando as redes neurais artificiais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evolução metamórfica (P-T-t) de granulitos e migmatitos do Complexo Guaxupé na região de São João da Boa Vista, SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uso popular de plantas medicinais na comunidade rural da Vargem Grande Município de Natividade da Serra, SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Um sistema com um bloco de teflon e um bastão abrasivo para a limpeza da superfície de corte de rebolos

Pós-graduação em Engenharia Mecânica - FEB

Análise do desgaste erosivo por partícula sólida em superligas à base de níquel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)